Tender For Proposed Interior Renovation Work Of Edp Section Annex Building At Balbharati Sb Road Pune
Tender Value
Ref. Documents
Estimated cost
Bid Submission
27 Jun 2024
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
pune → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Proposed Interior Renovation Work Of Edp Section Annex Building At Balbharati Sb Road Pune
BOQ
| Sl. No. | Item Description |
| 1 | DEMOLITION & DISMANTLING WORK |
| 2 | Dismantling Brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc. |
| 3 | Removing Existing tiles (with skirting),or marble or polished shahabad floor or dado with out be concrete including stacking the materials as directed with all leads, lifts etc. complete |
| 4 | Removing wooden,curtain wall,glass, A.C. partition. etc including framework and stack-ing the materials as with all leads, lifts etc. complete. |
| 5 | Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete. |
| 6 | Removing Electrical / Data, Light fixtures and switches on site as directedand keeping the Debris / Removed articles at a location ( Store area)inside site premises as directed by the Site in Charge / Client/ PMC. |
| 7 | Removing of Plumbing pipe/sewage pipe/disconnection of the water line at one location including required labour ,tools & tackles,minor fittings etc complete as directed byEnginer-in-charge.stacking of all materials at designated place is part of scope of work. |
| 8 | Dismantling and removing of existing Toilet water proofing and the underlying brick bat coba of any thickness upto the top of the RCC slab / chajja. shifting debris down stair, cleaning the areatoreceivenewwaterproofingtreatment,removingand cartingawaydebrisanywhereoutsidepremisesasdirected complete. |
| 9 | Making through holes in plain or reinforced cement concrete with Diamond core drilling system by using Bosch power tools.of following diameters. Rate in Dia/mm |
| 10 | a) 50 mm |
| 11 | b) 80 mm |
| 12 | c) 110 mm |
| 13 | d) 120 mm |
| 14 | e) 120 mm |
| 15 | f) 200 mm |
| 16 | Removal of Debris from Site Carting away of the debris outside the corporation limits,(or, as so mutually agreed upon); rate to include all leads and lift. |
| 17 | Dismantling the existing wooden storage, RCC masonry etc of complete area approx180 sqmtrs. |
| 18 | Site Cleaning- on regular basis + master cleaning |
| 19 | CIVIL WORK : |
| 20 | Providing Water proof bedding for flooring of Bath and WC 25 mm thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/- including ponding test etc.complete.Watrprooging Compound :- Dr Fixit, Fosroc, Sika, Pidilite . |
| 21 | Providing and Laying broken AAC / Burnt clay block for toilet step up portion comprising of 1:5:10 ( 1 cement : 5 Fine sand : 10 broken brick ballast of 20 mm nominal size ) over RCC slab to provide necessary gradient (1:120) with jointless waterproof layer (Brick Bat Coba) |
| 22 | Providing Brick Masonry with interlock \"Fourlock\" brick s in retaining walls, diaphragm wall,compound wall ,plinth & partition wall etc in specified 100mm/150mm thickness including construction with interlock \"Fourlock\" brick, filling the hollow spaces with cementious grout material of proportion of C:M1:6 using trap stone grit metal/artificial sand dusting of f the finished brick masonry\"Fourlock\"bricks,surface,watering&curingetccomplete.(Including steel reinfor cement of 8mm barass trengthening bar in hollow spaces of four lockbricks with cementious greet material ) |
| 23 | Providing Internal Cement Plaster 12mm thick in a single coat using Ready to use wall plaster to concrete or brick surface in all positions including scaffolding and curing complete.Providing groove at joint of B.B. Masonry and concrete members complete. a) cement ratio 1:5 With Prior Approval of Concerned S.E. |
| 24 | Providing and fixing Oval Type Under Counter Wash Hand Basin FOR ATTACHED TOILET (CABIN) of 420x590x195mm size with pillar cock,C.P.Angular stop cock,long thread of approved make continental including SS bottle trap of necessary pipe connection upto the outside face of the wall,having Telephonic Black/ Colour Granite of 180mm thick fixedo n Black Kadappa Framework, etc. Complete as directed by Engineer in charge. MAKE: JAQAUR / Hindware, selection as per architect. (Premium) |
| 25 | Providing and fixing coloured glazed earthenware full stall type Urinal with P.V.C. flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap brackets for fixing the cistern 32mm dia.P.V.C. flush pipe with fittings and flushing arrangement including lead soil pipe,lead trap soil pipe connection up to the outside face of the wall. MAKE: JAQAUR / Hindware, selection as per architect. (Premium) |
| 26 | Providing and fixing 10cm C.I. Nahani Trap including C.I. grating bend and piece of C.I. pipe upto the outside face of the wall complete. |
| 27 | Providing and fixing C.P.2 Way BIB cock with wall flange of approved make including necessary sockets/ union nut etc. complete as directed by Engineer in charge.MAKE :JAQUAR / Hindware Premium |
| 28 | Providing and fixing UPVC pipe fitting internally concealed type of required dia as per required places and required size as per site,complete. Make:-Suprim, Prince |
| 29 | Providing and fixing C.P. Pillar Cock (ISI).MAKE :JAQUAR / Hindware Premium |
| 30 | Providing and fixingJaquar make Concealed Stop Cockwith Fitting Sleeve, Operating Lever & Adjustable Wall Flange with Sealetc. complete.MAKE :JAQUAR / Hindware Premium |
| 31 | Providing and fixing white European type wall-hung, FOR ATTACHED TOILET (CABIN) of size 360mmx360mmx575mm with flush valve of approved make including concealed cistern, soil pipe, vent pipe upto outs ide face of wall,100mm dia C.I. plug bend inlet pipe all fittings ,cutting & making good walls, floors etc as directed by Engineer in charge.W.C MAKE :JAQUAR / Hindware Premium |
| 32 | Providing and fixing European type white glazed earthenwareFOR COMMON TOILET ,with coupled closet symphonic trap with symphonic low level white glazed 10litres cistern with black back lite seat with all necessary pipe connection etc. complete.MAKE: JAQAUR / Hindware, selection as per architect. (Premium) |
| 33 | Providing and fixing Hand shower (health faucet) with 8mm dia.1m long flexible tube having wall hook with approved make including necessary sockets/ union nut etc.complete as directed by Engineer in charge.MAKE: JAQAUR, selection as per architect. |
| 34 | Providing and laying Vitrified Matt Fininsh Tiles With stone Finish /texture having size 1800mm to 1200mmof 8 to 10mm thickness and confirming IS.15622-2006 (GroupBla)of approved make, shade and pattern for flooring in required position laid on a bed of1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete.. Makes :- Nitco/ Kajaria(Basic Rate 95 Rs/sqft) . |
| 35 | Providing and layingantiskid Vitrified Matt Fininsh Tiles (AT COMMON TOILET) having size 600 x 600 mmof 8 to 10mm thickness and confirming IS.15622-2006 (GroupBla)of approved make, shade and pattern for flooring in required position laid on a bed of1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete.. Makes :- Nitco/ Kajaria.(Basic Rate 95 Rs/sqft) . |
| 36 | Providing and layingVitrified Mirror/ Glossy Finish Tiles(AT ATTACHED TOILET) having size 590mm to 605mm x590mm to 605mm of 8 to 10 mm thickness and confirming to IS.15622-2006(groupBla)of approved make, shade and pattern for dadoin required position fixed in1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete.Makes :- Nitco/ Kajaria(Basic Rate 95 Rs/sqft) . |
| 37 | Providing and fixing 450mmx 550 mm / as per drawing size superior type Belgium mirror with16mm dia. nickel plated towel rod etc. complete. |
| 38 | Providing and Fixing 32mm thick One piece Single moulded puff ABSTRONE BUTADYNE STYRINE(ABS)Door shutter for internal use including toilets made up of outer ABS sheet of 1.2mm thick having puff insulation of 35 to 40 Kilogram/Cubic Metre density and 10mm dia.for steel bars 2 Nos.,wooden block to receive fixtures, having M.S.hinges 100mm length, M.S.handles 150mm length and 10mm dia sliding door bolt etc. complete |
| 39 | Providing and laying Telephone black/AmbaWhite/Cadburybrown/Rubyred/OceanBrown granite stone of 18 to 20mm thick for door frame/dado/window boxing etc.On C.M.1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete. |
| 40 | P & L Floor covering bysheet with taping for floor protection |
| 41 | FABRICATION WORK - Necessary fabrication work required to support above ceiling services and partion from structural roofing members as per requirement.(if required) |
| 42 | CuttingScreed Flooring of thick up to 50mm thick at required locations for raceways/conduit, disposing the unserviceable materials/debris and carting away from the site etc., complete and as directed. |
| 43 | a) 150MM |
| 44 | b) 300MM |
| 45 | c) 450MM |
| 46 | Providing and layingCement Concrte 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominalsize) 75mm thk at all heights including,finishing, curing, tamping etc. all complete as per drawingsand specifications. ( Item of applying water proofing material shall be paid for separately). |
| 47 | Providing and fixing in position Gypsum board false ceiling with 12.5mm thick Gypsum boards, screwed / fixed to the under structure of suspended G.I.Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25x50mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforcedcement concrete slab.The gypsum boards hould be fixed to galvanized iron grid with necessary screws.The boards should be taped and filled from under side to give smooth, seamless ceiling.The rate should include necessary additional ceiling sections and intermediate channels.Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cutouts,painting including labour, material, lifts etc. all complete. |
| 48 | Providing and fixing POP Cornice upto 11\"of approved design on the troughs and junctions. Rate shall be inclusive of necessary form work, frame required and finishing without any cracks. |
| 49 | WOODEN CEILING:Providing and Fixing wooden ceiling of 4mm thkveneer of archid/century make pasted over 4mm thk. flexiply screwed to 1/2\"X1/2\" chrome plated MS pipe frame of 18 gauge thickness in required curvature using stainless steel studs of 1\" dia as per detailed drg. & fixed to the rcc roof using rawl plugs and heght adjustable G.I suspension wires. including finishing in matt melamine polish (ICI/MRF poly coats only) complete in all respects as per detail drawing . Rate should include cost of dismantling existing gypboard ceiling where required & making new again, cutting of holes for lights etc. for concealing conduits/wiring, nothing extra will be paid for this. |
| 50 | Providing 3 coats of Plastic paint of approved shade to ceiling with necessary surface preparation ,primer and Putty etc complete.(ICI MAKE) |
| 51 | Providing 3 coats of Luster paintof approved shade to wallswith necessary surface preparation ,primer and putty etc complete.(ICI MAKE) |
| 52 | Solid Core Flush door Single leaf with/without provision for vision panel, Providing and fixing factory made solidcore flush door in single leaf 35mmthick, decorative types,of exterior grade,as per detailed drawings, conforming to I.S.:2202-1962 (Revised)with approved face veneerson both faces with/with out glazing and venetians in the positions shown on the drawings or as directed, all necessary beads, moulding and lipping, hold fasts, mat finish stainless steel fixtures, Accesories, hardware, fastenings, finishing with french-polish/waxing complete.(with out door frame).(Sample to be got approved from Ex.Engineer before use) Commercial Hard Wood shutter. (Hardware :-(Ozone, Dorma, Geze )) . |
| 53 | SINGLE GLAZED PARTITION SYSTEM - Supply & Installation of Full Height Partitions systems of 50 x 25 mm thick section on all four sides for the partitions verticals at the solid partition junction & Horizontals at top & bottom with installating of glass & \"T\" Section, corner Section & Vertical \"I\" Section between Glass to glass from FFL upto3600mm. Rate include supply & Installation of 10 mm thk toughened glass with double sided adhesive tapes for glass to glass butt joints . |
| 54 | Providing and fixing Trap Door of size 600 x 600mm in the false ceiling for A/c units with Access for HVAC services |
| 55 | Single leaf Glass Door frame Supply and installation of Modular Aluminium Glass door frame of100mm SystemDoor frame Dimension – 50mm x 25MMFinish – As Approved10mm thk clear thoughened GlassHardware make KUBIK/GEZE/JEB/DORMA Inclusive of Flush Hingeopen door closer with Hold Open UnitPull Handle H Type / Offset Handle Drop Down sealDoor stoper (Make JEB Slimline / Ikon VICOHardwear :-OZONE / GEZE / HAFFELE) . |
| 56 | Frameless Glass Door 12mm thick toughened glasswith required holes and cut outs including door Hardwares like Top Pivot , Top Patch , Bottom Patch , Floor Spring , 300mm D type Handle. End cap for fixed profiles.(Hardware :-(Ozone, Dorma, Geze )) .0.9/0.75 x 2.1 |
| 57 | Providing and fixing in position powder coated Aluminium four track sliding windowsof various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass , with mosquito net of approved quality etc. complete. |
| 58 | CARPENTARY WORK : |
| 59 | Providing and laying Storage Units at Passage of Size:- 1500mm(W) x 450mm(D) x2100mm(H) as per drg. they shall consist of 18mm thk.comm.ply. top and 18mm thk sides, bottom, and shelves. The bottom of the storages shall be at 3\" from flr. The back side of 6mm thk. Comm ply shall be provided. Wooden Lipping/ Laminate Lipping/ PVC Lipping on all other sides shall be provided. 18mm Comm. Ply shelves finished with 0.8mm white laminate supported on battens or SS buttons provided at 14 - 1/4\" interval for file storage.Shutters to be made in 18mm thk ply. All inner surfaces shall be finished with -0.8mm thk white laminate including the shutters. All outer surfaces shall be finished with 1mm Thk Approved laminate suede finish from architect including the shutters.Rate shall be inclusive of all necessary approved fittings like hinges, locks, ball catches, handles of approved design and miscellaneous hardware items. |
| 60 | Specification same as above but size mention below: Free standing storages at CABIN 2 - Size:- 1500mm(W) x 450mm(D) x2100mm(H), Details same as above. |
| 61 | Solid wooden partition 3\" thk - Form full height partitions with 60 x 35mm AL pipe with 24\"c/c, faced both sides with8 mm thick Ply board. Frame has to be fixed to ceiling slab/truss, inside voids to be filled with 50 mm thick panels of glasswool. The ply board is to be finished with 1.00 mm thick laminate/ patti, primer or 2 coats of emulsion paint & necessary grooves at the ends of the partition.All internal frames to be fixed with screws. The partition to include Al members at necessary hts to support Glass/soft boards. The cost to inlclude making cut outs for AC ducts/ Electrical conduting etc. |
| 62 | Providing and fixing Soft Board panel of specified sizes having 12 mm thick soft board covered with felt fabric of approved make and shade of premium quality and cost of fabric not less than Rs. 200/- Rm.The board shall be fixed on prepared surface with necessary hardware fittings etc. complete. Rate quoted shall be for the complete finished work including all the materials and labour mentioned above etc complete and all as directed by Client/ Architect |
| 63 | Providing fixing column/Partition Paneling in commercial Plywood and finished in laminate wherever necessary. |
| 64 | Providing and fixing column/PartitionPaneling as per drawing, in general it shall be made of Aluminium extruded sections Century / Jindal make of size 50x25mmx1.2mm thick in both horizontal and vertical direction at 600 mm c/c spacingframe shall be fixed at required depth as per drawing. The framework shall be covered with single layer 8mm thk plywood on one sides up to 75mm above false ceiling shall be finished with 8 mm MDF & approved colour Paint finish. The cost of necessary hardware\"s etc.; as required for complete the works. |
| 65 | Providing and fixing Pelmet (flat along ceiling) in 19mm commercial plywood for fixing of blinds through out glazing side in paint finish flush to false ceiling. |
| 66 | ProvidingandapplyingMelaminepolishof(Asian/ solvosol/ mrf) requiredfinishtothewoodworkbyspray machineincludingknottingandpreparingtheevensurfacebyscraping,applyingFrench polish , scaffolding if required etc. complete.Note:The work to be executed on prior approval of Superintending Engineer will be necessary. |
| 67 | MODULAR FURNITURE : |
| 68 | Warranty: 10 YEARS |
| 69 | Cabin Table 1A (W5A) - Supply and installation of Cabin Table of size 2250mmX 750mm X 1200mmin Stellar Cabin Table System - Stellar Cabin Table.Worktop - 43mm Thk.Matt/suede finish MDF Postlam Top 2400x750mm with 2 / .8mm straight PVC edge lipping Gable end - 18mm Thik. Matt/suede finish PB Prelam Gable end with 2 / .8mm straight PVC edge lipping Modesty Panel - 18mm Thik. Matt/suede finish PB Prelam modesty panel with 2 / .8mm straight PVC edge lipping.Round Leg - Dia 70mm Metal Epoxy polyester powdercoated (40-80 microns, Finish with Nano Technology Pre-treatment process), 2mm thick Aluminum Extrusion (hardness – 70-80 BHN) round leg as vertical support Metal Epoxy polyester powdercoated (40-80 microns, Finish with Nano Technology Pre-treatment process) HNI Access flap (450) above the top with verticle duct for wire travel from ground (As per drawing) |
| 70 | Corner Workstations 1500mm X 1500mm X 600mm X 600mm (W1A) - Supply and installation of Corner Workstations 1500mm X 1500mm X 600mm X 600mm inLeague Plus desk base system (BIFMA CERTIFIED) System - League Plus desk based Work top considered in 25mm thick Matt/suede finish Prelam particle board finish with 2 / .8mm straight PVC edge lipping and Worktop height 745mm from ground level.Metal Epoxy polyester powdercoated (40-80 microns, Finish with Nano Technology Pre-treatment process),1.2mm Thick League plus 50x50 open legs to support the worktop.Privacy Panel thickness 18mm, height from ground 1200mm (Panel height: 4555mm) - Magnetic Pinup (0.8mm Thik Metal Magnetic Pinup wrap with Silver range fabric (GSM- 250 to 300)) Metal Epoxy polyester powdercoated (40-80 microns, Finish with Nano Technology Pre-treatment process), HNI Access flap (450) above the worktop for electrical, Metal Epoxy polyester powdercoated (40-80 microns, Finish with Nano Technology Pre-treatment process), verticle duct for wire travel from ground.Front Modesty Panel - Matt/suede finish 18mm Thk. PB Prelam modesty panel of 415mm H with 2 / .8mm straight PVC edge lipping (As per drawing) |
| 71 | RECEPTIONTABLE - 2100L X 900D X 750HT comprising of Free standing table with PLB/ Metalunderstructure, side storageof 900mm L in combo storage with openable shutter in side & (2D ,1F) drawer set Pedastals in side table. |
| 72 | Conference Table @ MEETING ROOM Meeting Table(W08) - Supply and installation of Meeting Table of size 4100mm X 1200mmFitting table System - KD Fitting table.Worktop - Matt/suede finish 25 mm Thk. straight Prelam particle board with 2 / .8mm straight PVC edge lipping and Worktop height 727mm from ground levelGable end - Matt/suede finish 25mm Thk. straight Prelam particle board with 2 / .8mm straight PVC edge lipping gable end. Modesty Panel - Matt/suede finish 18mm Thk. Straight Prelam particle board modesty panel 600mm H with 2 / .8mm straight PVC edge lipping.Metal Epoxy polyester powdercoated (40-80 microns, Finish with Nano Technology Pre-treatment process), Access flap (600) above the worktop for electrical, Metal Epoxy polyester powdercoated (40-80 microns, Finish with Nano Technology Pre-treatment process), verticle duct for wire travel from ground.(As per drawing) |
| 73 | Key board tray & CPU Trolley |
| 74 | PLB Mobile pedestal |
| 75 | MISCELLANEOUS Work |
| 76 | Providing and Fixing Rollar Blinds AMI Make or approved make & shade of 38mm round Aluminium channel with Black out fabric & telting with chain (Ball)system with all necessary fixtures and fitting etc.complete.(Sample to be final by Engineer In-charge prior execution of work) |
| 77 | P/ F Sinages of vinyle finish of Letter size and all details as per drawing on 1.5mm THK plate. PUSH - PULL ONLY |
| 78 | Providing and fixing Lumar Frosted film on Glass Partition withas per the manufacturer specification |
| 79 | SS plate of 1.5mm thick Providing and fixing junction box cover in hard flooring of various sizes |
| 80 | Plain Fiber Cement Board Sheet, Thickness: 6 To 18mm with necessary fitting fixtures for panneling as spesified location as per discussion with architect |
| 81 | ELECTRICAL WORK |
| 82 | Supply, Installation & Testing of of standard DBs with all accessories including MCBs etc. |
| 83 | MAIN VTPN DB |
| 84 | 6 way VTPN MCCB I/CDB Double door complete with lugs, MCB’s, ELCB’s, etc., as per following details :-(Light Control DB ) |
| 85 | Incomer : 1. 100A TP+NLMCCB,16 KA:1 No. |
| 86 | Outgoing : |
| 87 | 1. 40A 3P MCB,10 KA:3 No. |
| 88 | 4. 63A 3P MCB,10 KA: 1 No. |
| 89 | LIGHTING /AC/ RAW Power DB |
| 90 | 8 way TPN MCB DB Double door complete with lugs, MCB’s, ELCB’s, etc., as per following details :-(Light Control DB ) |
| 91 | Incomer : |
| 92 | 1. 63 A 4P MCB,7.5/10 KA:1 No. |
| 93 | 1. 63A, 30mA, 4P, RCCB:- 1 Nos . |
| 94 | Outgoing : |
| 95 | 6/10/16/20A SP MCB ‘ C’ Characteristic , 10 KA : 10Nos. |
| 96 | UPS DB (UPS +EMERGENCY CIRCUIT ) |
| 97 | 12 way sPNMCB DB Double door complete with lugs, MCB’s, ELCB’s, etc., as per following details :- |
| 98 | Incomer : |
| 99 | 1. 40A 4P MCB,10 KA:1 No. |
| 100 | 1.40A, 30mA, 4P, RCCB:- 1 Nos . |
| 101 | Outgoing : |
| 102 | 6/10/16/20A SP MCB ‘ C’ Characteristic , 10 KA : 10Nos. |
| 103 | 40-63 Amp TPN MCB with metal enclosure For UPS incmng |
| 104 | 40-63 Amp ELMCB 300 MA For HVAC |
| 105 | Cable Termination |
| 106 | End Termination of following cables using proper size and type of Lugs. Proper and permanent tagging/numbering shall be done. Proper size cable glands shall be used for each cable entry. |
| 107 | 3.5C X 35 SQ. MM. AL XLPE Armoured |
| 108 | WIRING Point Wiring |
| 109 | Supply & Installation of point wiring using 600v grade 1.5 sqmm copper conductor PVC insulated wires PVC conduits laid concealed over false ceiling or in wall chases including 1.5 sqmm circuit wires from the relevant DB and also including 1.5 sqmm green colour copper earth wire and provision of grid plate type switches & sockets as approved by the consultant .Each circuit feeding not more than 8 points OR 800 watts as per following configuration |
| 110 | Primary light points including the cost of 5A switch(Avg circuit length 6mtr) |
| 111 | Secondary light points looped from the above point (Avg circuit length 3mtr) |
| 112 | 5/15A Ups / Raw Power Plug point. (Rate are without wire) Fridge/Water dispencer / Ovan / Printer / Ploter / Fire panel / wall fan / Exaust / pantry / water purifier / etc.. |
| 113 | HALF POINT (6A SWITCH AND SOCKET ON MAIN SWITCHBOARD) |
| 114 | CEILING FAN POINT WITH (includes Switch to point wiring, Fixing Fan Box, Fan Hook & Fan Regulator) |
| 115 | S & I of point wiring for UPS Point / Raw Power Points for computers using 3 X 2.5 Sqmm copper wires pulled through already laid raceways and taken upto table top using PVC rigid or flexible conduits run within wooden/metal partitions Each point consisting of 2 nos of 5A , 2/3 pin sockets & 1 No., 15A Switch , wired together forming one point |
| 116 | 6 Amp 5 Pin Socket with 6 Amp Switchfor Raw power.(Avg circuit length 5 mtr) |
| 117 | Wiring for lighting circuit From LDB/RPDB to Switch using 2.5 SQMM MULTI-STANDCOPPERCONDUCTOR WIRES (ONE FOR PHASE REDONE FOR NEUTRAL (BLACK COLOUR) AND ONE FOR EARTH (GREEN COLOUR)(1.5 SQMM) WIRING SHALL BE DRAWN IN SUITABLE DIAINDEPENDENT CONDUIT (DB to SB & DB to PP) |
| 118 | Wiring for AC and Geyser points using 4.0 SQMM MULTI-STANDCOPPERCONDUCTOR WIRES (ONE FOR PHASE REDONE FOR NEUTRAL (BLACK COLOUR) AND ONE FOR EARTH (GREEN COLOUR)(1.5 SQMM) WIRING SHALL BE DRAWN IN SUITABLE DIAINDEPENDENT CONDUIT (DB to SB & DB to PP) |
| 119 | 2 x 1.5sqmm + 1 x 1.0sqmm E.Wire (Emergency & Extra Pri,Sco.) |
| 120 | S & I of point wiring for UPS or stabilized with 2 x 2.5 & 1 x 1.5 sqmm cu conductor powerpoints on workstations / table for yellow phase, blue neutral , green earthingthroughfloor raceways and taken upto table top using PVC rigid or flexible conduits run within wooden/metal partitions . ( MAX FOUR/SIXtables served by one circuit from CPDB ) ( MAX 10/12 tables served by one circuit from LRDB ) without counduit |
| 121 | 3 C x 2.5 sqmm sqmm for A/C supply from AC DB to AC unit with conduit |
| 122 | LIGHTING FIXTURES & FANS |
| 123 | Supply & Installation of LED DOWNLIGHTER 15W - 18 W ( Philips cat. No. DN296B LED 20S PSU WH, CW - IRDLR01RD-15CW OR Eqv) 5 year warranty |
| 124 | Supply & Installation of 1 X 20 Watt T5 tube Light (Philips cat. No. RC810X LED20S 6500 PSU W15L 120 ODWH) |
| 125 | SPOT LIGHT / MIRROR LIGHT |
| 126 | Ceiling mounted double bearing fan of 1200 mm sweep with 3/4 star energy saving rated BEE. |
| 127 | 9\" Exhaust fan with louvers arrangement for air flow |
| 128 | Dismatling & Fixing Split A.C 2 Ton with outdoor with copper tubing (upto 6 mtr) ,including bore holes ,L bracket, with all necessary fixtures and fittings etc. complete with approval of Engineer in Charge. |
| 129 | Dismatling & Fixing Split A.C 1.5 Ton with outdoor with copper tubing (upto 6 mtr) ,including bore holes ,L bracket, with all necessary fixtures and fittings etc. complete with approval of Engineer in Charge. |
| 130 | FIRE PROTECTION SYSTEM (SPRINKLERS) |
| 131 | Sprinkler System |
| 132 | Above ground piping - MS,Black, IS1239, Part 1, C Class, Fittings as per IS 1239, Part 2, Painting Fire Red.MAKE:Jindal |
| 133 | 80NB |
| 134 | 65NB |
| 135 | 50NB |
| 136 | 40NB |
| 137 | 32NB |
| 138 | 25NB |
| 139 | Hanger Supports.MAKE:Hi-Tech |
| 140 | 80NB |
| 141 | 50NB |
| 142 | 32 NB & 40NB |
| 143 | 25NB |
| 144 | Valve,MAKE:Zoloto |
| 145 | Butter fly valve80 NB |
| 146 | Sprinkler Pendant type |
| 147 | Sprinkler Flexi drop, breaded type length upto 1500mm with Rossette Plate |
| 148 | Supplying & installing of Portable Fire extinguishers of following type & capacity. |
| 149 | ISI marked (IS 14609) portable fire extinguishers, A.B.C. dry powder(Mono Ammonium phospate 90% filling chemicals) type ofwith pressure gauge, discharge hose and nozzle and complete in all respects including initial fill.supoort details as per drawing as per specification and directed/approved by Engineer-in-Charge (6kg) |
| 150 | ISI marked (IS 14609) portable fire extinguishers, CO2. dry powder(Mono Ammonium phospate 90% filling chemicals) type ofwith pressure gauge, discharge hose and nozzle and complete in all respects including initial fill.supoort details as per drawing as per specification and directed/approved by Engineer-in-Charge (6kg) |
AI Tender Summary
Tender Timeline
Jun 13, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedJun 27, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 28, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender