|
| 1 | Dismantling artificial stone flooring up to 50 mm thick by carefully chiselling without damaging the base and removing rubbish as directed within a lead of 75 m a) In ground floor including roof. |
| 2 | Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m In ground floor including roof.a) up to 150 mm thick |
| 3 | Stripping off worn out plaster and racking out joints od walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75 m as directed. |
| 4 | Plaster (to wall, floor, ceiling etc) with sand and cement morter including rounding off or chanfering corners as directed and racking out joints, including throating, nosing and drip course, scaffolding/staging where necessary (Ground Floor). (Excluding cost of chipping over concrete surface).ii) With 1:4 cement morter. |
| 5 | b) 15 mm thick plaster. |
| 6 | c) 10 mm thick plaster. |
| 7 | Artificial stone in, floor, dado, staircase etc. with cement concrete (1:2:4) with stone chips, laid in panelsas directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including racking out joints or roughening of concrete surface and application of cement slury before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. In Ground Floor 3 mm thick toping (High polishing grinding on this item is not permited with ordinary cement) using grey cement.ii) 25 mm thick. |
| 8 | Supplying, fitting and fixing stainless steel Sink complete with waste fittings and two coats of painting of C.I. brackets.a)Sink Onlyii) 530 mm X 430 mm X 180 mm |
| 9 | Wash basin white vitreous china of approved make(without fittings) supplied, fitted and fixed in position on 75mm X 75 mm X 75mm wood blocks and C.I. brackets including two coats of painting of C.I. bracketsi) 450 mm X 300 mm Size |
| 10 | Supplying fitting & fixing approved brand 32mm dia P.V.C. waste pipe, with P.V.C coupling at one end fittedwith necessary clamps. ii) 750 mm long |
| 11 | Supplying fitting & fixing approved brandP.V.C. CONNECTOR white flexiblewith bothends couplingwith heavy brass C.P. nut,15 mm dia. ii)450 mmlong |
| 12 | Supplying fitting & fixing pillarcock of approved make.a)i) CP Pillar cock-15 mm (Equivalent to code No- 507 &Model – Tropical/Sumthing Specialof ESSCO or similar brand |
| 13 | Supplying fitting & fixing C.I. round grating.i) 100 mm |
| 14 | Supplying fitting & fixing bib cock or stop cock |
| 15 | a)i)Chromium platedBib cock short body (Equivalent to code No- 511&Model- Tropical/Sumthing special of ESSCO or similar brand) |
| 16 | (ii) Chromium plated Concealed Stop Cock (Equivalent to Code No. 514(A) & Model - Tropical / Sumthing Special of ESSCO or similar brand). |
| 17 | (d) (i) Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand). |
| 18 | f) (ii) CP 2-way bib Cock - 15 mm, supplied, fitted and fixed. (Code No.5041 & Model - FLORENTINE of JAQUAR or similar brand). |
| 19 | Supplying, fitting and fixing shower of approved brand and make.(a) (i) Chromium plated round shower with revolving joint 100 mm dia with rubid cleaning system (Equivalent to Code No. 542(N) & Model - Tropical / Sumthing Special of ESSCO or similar brand). |
| 20 | Supplying, fitting & fixing best quality Indian makemirror 5.5 mm thick with silveringas per I.S.I specifications supported on fibre glass frame of any colour, frame size 550x400 |
| 21 | Supplying fittingand fixing PTMT SmartShelf of approved make of size 300mm |
| 22 | Supplying fitting and fixingSoap holder. a) PTMT (Prayag or Equivalent) |
| 23 | Supplying,fitting and fixing 10 litre P.V.C lowdown cistern conforming toI.S. specificationwith P.V.C fittings complete, C.I. brackets including twocoats ofpainting to bracket etc |
| 24 | Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete. i) Polythene Flush Pipe |
| 25 | Dismantling Orissa pattern W.C. including taking out of base concrete, if necessary, complete. |
| 26 | Supplying,fitting and fixing Orissa pattern water closet in white glazed vitreouschinaware of approved makein position complete excluding ‘P’ or ‘S’ trap(excluding cost of concrete for fixing) i) 580 mm X 440 mm |
| 27 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. (ii ) River Bazree |
| 28 | Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (up to roof or ground floor).(When the height of a particullar floor is more than 4 m the equivalent floor height shall be taken as 4 m and extra for works beyond the initial 4m height shall be alloued under 12(e) for every 4m or part thereof.)a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-in-Charge. |
| 29 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking andbending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawingand direction. (a) For works in foundation and upto roof of ground floor/upto 4 m (i) Tor steel/Mild SteelIII. OTHER MANUFACTURERS NOT SPECIFIED |
| 30 | 125 mm thick Brick work with 1st class bricks in cement mortar (1:4) In ground floor |
| 31 | Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc(a) With \"P\" trap |
| 32 | Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. (b) For ConcealedWork (ii) CPVC Pipes Class-2,SDR-13.5 |
| 33 | 15 mm |
| 34 | (a) For Exposed Work |
| 35 | 20 mm |
| 36 | 40mm |
| 37 | Supplying, fitting & fixing granite slabs 15mm to 18 mm. thick with uniform texture & without decorative veins in columns, wall, facia etc. with 15 mm thick [avg] cement mortar (1:2) including making suitable arrangements to hold the stonesproperly by brass / copper hooks including pointing in cement mortar (1:2) (1 white cement : 2 marble dust) with admixture of pigment matching the stone shades all complete as per direction of the Engineer-in-charge including cost of all materials, labours, scaffolding, staging ,curing and roughening of concrete surface complete. Area of eachGranite slab > 0.6 upto 1.0 square metre. [Using cement slurry at back side of granite @ 4.4 kg/sq.m & white cement slurry for joint filling @ 1.8 kg/sq.m] |
| 38 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by syntheticadhesive & grout materials etc. (A) FloorWith Sand Cement Mortar (1:4) 20 mm thick & 2mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m.(b) Area of each tile above 0.09 Sq.m (i) Coloured decorative |
| 39 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by syntheticadhesive & grout materials etc. (B) WallWith Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (a) Area of each tile upto 0.09 Sq.m(i) Coloured decorative |
| 40 | Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer\"s specification) including cleaning and smoothning of surface.Two Coats |
| 41 | (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(a) On timber or plastered surface :With other than hi-gloss of approved quality-(iii) One coat (with any shade except white) |
| 42 | (A) Painting with best quality synthetic enamel paint of approved makeand brand including smoothening surface by sand papering etc. includingusing of approved putty etc. on the surface, if necessary : (b) On steel or other metal surface :With super gloss (hi-gloss) - (iv) Two coats (with any shade except white) |
| 43 | Shutters of 2/3rd panel and 1/3rd glazed of doors and windows as per design (each panel consisting of a single plank without joint and with ordinary glass of 7.4kg. Per sq.m. /3mm thick) fitted with putty bed and teak wood beads and nails including fitting and fixing shutters in position but excluding the cost of glass,putty, teak bead, nails, hinges etc. and other fittings, in ground floor.(iv) 25mm thick shutters with 12mm thick panel of size 30 to 45 cm.(c) Other Local Wood. |
| 44 | Removing loose scales, blisters etc. from old painted surface andthoroughly smoothening the surface to make the same suitable forreceiving fresh coat of paint. |
| 45 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer\"s specification and as per direction of the EIC. [This item to be done under specific instruction of the SuperintendingEngineer]In Ground Floor:(a) One Coat |
| 46 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer\"s specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.In Ground floor (Two Coat) a) Normal Acrylic Emulsion |
