Tender For Improvements To Karumathi Shed And Construction Of Bathroom At Kundupalayam In Thattanchavady Constituency
Tender Value
5.87 Lakhs
Estimated cost
Bid Submission
21 Jun 2024
0 days left
EMD
11750
Bank guarantee accepted
Document Fee
525
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
thattanchavady → Puducherry
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Improvements To Karumathi Shed And Construction Of Bathroom At Kundupalayam In Thattanchavady Constituency
BOQ
| Sl. No. | Item Description |
| 1 | Code No: 2.8.1Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms , lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed , within a lead of 50m -All kinds of soil. |
| 2 | Code No. 2.27Supplying and filling in plinth with river sand under floors, including watering, ramming consolidating and dressing complete |
| 3 | Code No. 2.27A.1Supplying and filling with gravel (excluding rock) in trenches , plinth, sides of foundations etc . In layers not exceeding 20 cm in depth consolidating each deposited layers by ramming and watering etc .complete including all lead and lift |
| 4 | Code No. 4.1.5Providing and laying inposition cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) |
| 5 | Code No. 4.1.10Providingandlayingin position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level 1:5:10 (1 cement: 5 sand : 10 graded stone aggregate 40mm nominal size) |
| 6 | Code No. 4.3.1Centeringandshuttering including strutting, propping etc. and removal of form work for - foundations, footings, bases for columns. |
| 7 | Code No. 6.1.1 (Addendum)Brick work with common burnt clay F.P.S. (non modular ) bricks of class designation 3.5 in superstructure above plinth level upto floor five level in all shapes and sizes in - cement mortar 1:4 (1 cement : 4 coarse sand) |
| 8 | Code No.6.13.1 (Addendum)Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 3.5 in superstructure above plinth level upto floor V level - cement mortar 1:3 (1 cement : 3 coarse sand) |
| 9 | Code No.6.15Extra for providing and placing in position 2 nos 6mm dia M.S.bars at every third course of half brick masonry |
| 10 | Code No.9.120.2Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S.tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15 x15 mm for top & bottom rails. M.S.frame shall have a coat of steel primers of approved make and manufacture . M.S. frame covered with 5 mm thick heat moulded PVC \"C\" channel of size 30mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top , bottom and lock rails shall be provided both side of the panel. 10mm (5 mm x 2) thick , 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail , panelling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded / sealed to the styles & rails with 7 mm (5 mm + 2 mm) thick x 15 mm wide PVC sheet beading on inner side , and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the \"C\" Channel using PVC solvent adhesive etc. complete manufacturer\"s specification & drawing - 30mm thick pre laminated PVC door shutters |
| 11 | Code No.10.25.2Steel work welded in built up sections / framed work , including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required - in gratings, frames, guard bar, ladder, railings, brackets,gates and similar works |
| 12 | Code No.11.36BProviding and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer) , of approved make (Jhonson / Asian / Somany / Nitco) in all colours , shades of size 300 x 450 mm as approved in skirting , risers of steps and dados, over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing inwhite cement with pigment of matching shade complete - size 300 x 450 mm |
| 13 | Code No.11.40.2Providing and laying rectified ceramic rustic / matt finish floor tiles of size 600x600 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS:15622 of approved make (Somany / Nitco) in all colours shades,laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigments etc., complete. |
| 14 | Code No.12.20Providing and laying pressed clay tiles (as per approved pattern 18mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound , laid over a bed of 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete. |
| 15 | Code No.12.41.1Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion, (i) Single socketed pipes - 75 mm diameter |
| 16 | Code No.12.42.5.1Providing and fixing on wall face unplasticised - PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS:382, leaving 10mm gap for thermal expansion - bend 87.5 degree - 75 mm bend |
| 17 | Code No.13.8.312 mm cement plaster of mix 1:5 (1 cement : 5 fine sand) |
| 18 | Code No.13.16.16mm cement plaster of mix 1:3 (1 cement : 3 fine sand) |
| 19 | Code No.13.29.318 mm thick plain cement mortar band in cement mortar 1:4 (1 cement : 4 fine sand ) - raised band |
| 20 | Code No.13.43.1Applying one coat of water thinnable cement primer of approved brand and manufacturer on wall surface - water thinnable cement primer |
| 21 | Code No.13.52.1Finishing with epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer\"s specifications including appropriate priming coat, preparation of surface , etc.complete - on steel work |
| 22 | Code No.14.43Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 23 | Code No.14.66.1Finishing walls with acrylic smooth exterior paint of required shade - old work (two or more coats applied @1.67 ltr / 10 sqm) on existing cement paint surface |
| 24 | Code No.15.2.2Nominal concrete 1:4:8 or leaner mix (including equivalent design mix) |
| 25 | Code No.15.23.1Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead - for thickness of tiles 10mm to 25mm |
| 26 | Code No.15.56Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead |
| 27 | Code No.18.9.11Providing and fixing ASTM pipes including all ASTM plain& brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing . This includes jointing of pipes & fitting with one step ASTM solvent cement and testing of joints complete (Internal work exposed on wall ) - 20mm nominal outer dia pipes |
| 28 | Code No.18.48AProviding and placing on terrace (at all floor levels) polyethylene water storage tank ISI: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank - Circular Tank |
| 29 | Code No.18.54.2Providing and fixing brass PTMT bib cock of approved quality and color 15mm - nominal bore, 122mm long weighing not less than 99gms. |
| 30 | Code No.8.3BPrinting new letters and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade - English and Roman |
AI Tender Summary
Tender Timeline
Jun 14, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedJun 21, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 21, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender