Tender For 47. Construction Work Of Phc At Budel Block Salumbar, Distt. Salumbar
Tender Value
1.25 Crore
Estimated cost
Bid Submission
25 Jul 2024
0 days left
EMD
2.50 Lakhs
Bank guarantee accepted
Document Fee
1500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
salumbar → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For 47. Construction Work Of Phc At Budel Block Salumbar, Distt. Salumbar
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 21-Jun-2024 | Date | Date | 25-Jul-2024 |
BOQ
| Sl. No. | Item Description |
| 1 | Particulars |
| 2 | (Civil works) Clearingjungleincludinguprootingof rankvegetation,grass,brushwood,treesand saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. |
| 3 | Earthworkinexcavationbymechanicalmeans(HydraulicExcavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or10sum on plan) including dressing ofsides and ramming ofbottoms,lift upto 1.5 m, including taking out the excavated soil and depositing and refilling ofjhiriwithwatering&ramminganddisposalofsurplusexcavatedsoilas directed with in a lead of 50 meter. All kinds of soils |
| 4 | Fillingavailableexcavatedearth(excludingrock)intrenches,plinthsideof foundationetc.inlayersnotexceeding20cm.indepth,consolidatingeach depositedlayerby ramming andwatering including lead upto 50meterandwith all lift. |
| 5 | Earth work in rough excavation, banking excavated earth in layers not exceeding 20cm in depth, breaking clods watering, rolling eachlayer with1/2tonne roller, or stone or steel rammers and rollingevery3rdandtop-mostlayerwithpowerrollerofminimum8-10tonnecapacityand dressing up in embankment for roads, flood banks marginal banks and guide banks or filling up ground depressions, lead up to 50 Mtr. and lift up to 1.5 Mtr.:All kinds of soil - (Deduct)Banking excavated earth in layers not exceeding 20cm. in depth breaking clods watering, rolling each layer with 1/2 tonne roller, or stone or steel rammers, and rolling every 3rd and top- most layer with power roller of 8-10 tonne capacity and dressing up in embankments for roads, flood banks marginal banks, and guide banks etc. lead up to 50 Mtr. and lift up to 1.5 Mtr.All kinds of soils |
| 6 | Carriage of Earth, Sand, Lime, Morrum manure or sludge for 5 Km. lead. |
| 7 | Supplying chemical emulsionin sealed containers including delivery as specified. Chlorpyriphos/Lindane emulsifiable concentrate of 20% |
| 8 | DilutingandinjectionChloropyrifosEmulsifiableconcentrate20%with1%concentrationfor PRE-CONSTRUCTIONAL Anti termite treatment as per IS 6313 part III as amended from time to time and creating a continuous chemical barrier under and around the columnpits, wall trenches, basement excavation, top surface of plinthfilling, junctionof wall and floor along the external perimeter of building expansion joints, over the top surface of consolidated earth of which aprochis to be laid surrounding of pipes and conduits etc. complete as per specification (Plinth floor area only shall be measured for payment and excluding the cost of chemical emulsion) |
| 9 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8(1cement:4coarsesand: 8graded stoneaggregate 40mm nominal size). |
| 10 | Random Rubble stone masonry for with hard stone in foundation and plinth in CementSandmortarabove30CMthickwallin:CementMortar1:6(1- Cement : 6-Sand). |
| 11 | CenteringandShutteringwithplywoodorsteelsheetsincludingstrutting, proppingbracingbothwaysandremovalofformworkforfoundation, footings,strap beam, raft , bases of columns etc. |
| 12 | Providingandlayinginpositionspecifiedgradeof cementconcretefor all RCCstructuralelementsuptoplinthlevelincludingcuring,compaction, finishing with rendering in cement sand mortar1:3 (1 cement: 3 coarse sand) and making goodthe jointsand costofplastizers(ifrequired)excluding the cost of centering, shuttering and reinforcement.M20 grade Nominal Mix / Design Mix |
| 13 | Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in :Cement mortar 1 : 6 (1 cement : 6 coarse sand) |
| 14 | Centering&shutteringwithplywoodor steelsheets includingstrutting, proppingbracingbothwayswithsteelprops andremovalofformworkfor upto floor five level for :Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates,anchorblocks,sills, chhajjas,lintel,beam, plinth beam etc. |
| 15 | Providing and laying in position specified grade ofcement concrete for RCC structural elements upto floor five level including curing, compaction, finishing withrenderingincementsandmortar1:3(1cement:3coarsesand)and making good the joints and cost of plastizers( if required) excluding the cost of centering,shuttering and reinforcementforBeams, suspended floors, roofs, gridershavingslopesupto15º,landings,balconies,shelves,chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.M20 grade Nominal Mix / Design Mix |
| 16 | ProvidingandfabricatingreinforcementforR.C.C.workincluding straightening, cutting, bending, placing in position and binding (including cost ofbindingwire)allcompleteuptofloorfivelevel.Thermo-mechanicallyTreated bars (Conforming of relevent IS code) |
| 17 | Half brick masonry in Superstructure ,above plinth level upto floorVlevel using bricks of designation 75 Cement mortar 1 : 6 (1 cement : 6 coarse sand) |
| 18 | Add extra providingand placing in position 2 Nos. ,6mm Ø M.S. barat every thirdcourse of half brick masonry . |
| 19 | Making khurras 450 x 450mm with average minimum thickness 50mmcement concrete 1 : 2:4 over P.V.C. Sheet 1 Mtr. x 1 Mtr. x 40micron finished with 12mm cement plaster 1 : 3 and one coat of neat cement, rounding edges and making and finishing the out let complete. |
| 20 | Providing and fixing 1st quality standard white, grey, ivory, fume red brown, lightgreen,lightblueandotherlightshadesglazedtilesconfirmingtoIS: 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on abedofneatcementslurry finishedwith flush pointing inthe white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). |
| 21 | Extraforusingsize above 200x300mm in glazed tiles and for using 400mm x 400mm MAT finishedtiles in place of 300mm x 300mm size. |
| 22 | Providingand fixing 1st quality MATfinished ceremic tile size 300x300mm confirming to IS:13755and IS:15622coloursuch as white,grey,ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cementmixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). |
| 23 | Providingandfixingexternalgradeboardsolidcoresingleleafflushdoor shuttersISI2202-67markedusingPhenolformaldehyderesin inglueboth sides with approved steel fittings complete as per annexure \"A\": 35 mm thick . Commercial Veneer both side |
| 24 | Extraforprovidingexternallippingwith2ndclassteakwoodbattens6mm minimumdepthonalledgesofshutters(overallareaofdoorshutterto be measured) over above item |
| 25 | Providing and fixing stone slabs table rubbed, 15-18 mm thick in Walls, Steps, Pillars, Counters, Jambs, Shelves, Sills etc. laid on 12mm (Av.) thick base of CM1:3(1cement:3coarsesand)jointingwithwhitecementmortar1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. Keseriaji/ Abu Ambaji (Green Marble) Above 3601 Cm2 Slabs |
| 26 | Extrainmarbleflooringworkforupto50mmwidestripofGreen/White/Jaisalmerstonein flooring work as per direction of Engineer in Charge |
| 27 | Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. Good quality South Black (Above 3601 cm2) |
| 28 | Extraforprovidingedgemouldingto15-18mmthickmarble/Granite/Kotastonecounters, Vanities etc. including machine polishing to edge to give highgloss finishetc. completeas per design approved by Engineer-in-Charge. |
| 29 | (a) Marble work |
| 30 | Full Edge moulding |
| 31 | Half Edge moulding |
| 32 | (b) Granite/Kota Stone Work |
| 33 | Full Edge moulding |
| 34 | Half Edge moulding |
| 35 | Kotastone slab flooring 25 mm thick over20 mm (average) thick base laid overandjointedwithgreycementslurrymixedwithpigmenttomatchthe shadeoftheslabincludingrubbingandpolishingcomplete withbaseof cement mortar 1 : 4 (1 cement : 4 coarse sand) For area of each slab from 2001 to 5000 Sq.Cm |
| 36 | P & F 1st qualityVitrified Porcelain Polished tiles on floor, skirting and steps etc.indifferentsizes(thicknesstobespecifiedbymanufactuer)withwater absortion less than 0.08% and conforming to IS 15622 of approved make in all colourand shade, laid with20mm thick CM1:4includinggrounting the joints with white cement and matching pigment etc complete. size 600 mm X 600 mm |
| 37 | Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles includingrubbing and cleaning etc.complete on 20 mm thick bed of cementmortar 1:4 (1 cement : 4 coarse sand)Dark shade using ordinary cement. |
| 38 | Kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on12mm (average)thickcementmortar1:3(1cement3coarsesand)and jointed with grey cement slurry mixed with pigment to match the shade of theslabs, including rubbing and polishing complete. For area of each slab from 2001to 5000 Sqcm |
| 39 | ProvidingandlayingwaterproofingtreatmentinsunkenportionofWCs,bathroometc.,by applying cement slurry mixed with water proofing cement compound consisting of applying :a) first layer of slurry of cement @ 0.488 kg/sqm mixed with water proffing cement compound @0.253 kg//sqm .This layer will be allowed to air cure for 4 hours.b)Secondlayerofslurry [email protected]/sqmmixedwithwaterproffingcement compound @ 0.126 kg/sqm This layer will be allowed to air cure for4 hours followed by water curing for 48 hours.The rates includes preparation of surface treatment & sealing of all joints ,corners,junction with polymer mixed slurry. |
| 40 | Supplying and fixing in walls machine cut and polished stone shelves, tands andin CM 1:3 with machine cut edges : |
| 41 | Kota stone minimum 30 mm thick. |
| 42 | Sand or other approved stone 50mm thick. |
| 43 | Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish : 20mm thick |
| 44 | 6 mm thick cement plaster to ceiling of mix1:3 (1cement : 3-fine sand) |
| 45 | Making grooves as per design in plaster 10mm to 20mm wide. |
| 46 | Providingandapplyingwhitecementbasedputty overplasteredsurfaceto prepare the surface even and smooth complete New Plastered surface (three or more coat) |
| 47 | Distemperingwith1stqualityacrylicwashabledistemper(readymixed)of approved manufacturer and of required shade and colour completeincluding all scaffolding as per manufacturer\"s specification.Twoormorecoatsonnewwork includingprepartionofbasewithprimer,putty, lippy etc complete in all respect. |
| 48 | Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding.New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). |
| 49 | Paintingwithsyntheticenamelpaintofapprovedbrandandmanufactureto give an even shade : |
| 50 | Two or more coats on new work |
| 51 | Applying priming coat : With ready mix pink or gray primer of approved brand and manufacture on wood work hard and soft wood. |
| 52 | Random rubble dry stone Kharanja under floor. |
| 53 | Providing and fixing steel glazed window frame made out of 80x40 mm hollow sheet section of 16 gauge thickness, joint mitred weldedand grinded including hold fast of steel lugs 13mm x 3mm and 15 Cm long embedded in C Cblock 15x10x10Cm of1:3:6nominalconcrete andincluding fixingofpivoted hinges of superior quality, window shutters made out of 50 x 25.0 mm hollow steelsection15mm paitamof18gaugethickness,jointmitredandgrinded including 10mm x 10mm square bars welded to framefor paitam fixing float glass 4mm thickpanes with glazing clips and metal sash putty andfixing of shutters frames peg stay,U shape handle 100 mm long,tower bolts100 mm long of steel powder coated superior quality including fixing and jointing with framehingesprimingcoatwithsteelprimercompleteinallrespectasper direction of Engineer-in –charge |
| 54 | S&f fixed wire gauge of stainless steel of 14 mesh x 24 gauge to the aluminium window by Aluminium beading 20x3mm with suitable screws not exceeding 150mm distance at all heights with all lead andlift with scafolding. |
| 55 | Providing and fixing Square bars orother flat welded to window, ventilatiors etc. |
| 56 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2coarse sand : 4stoneaggregate10mmanddowngauge)including finishingwithcement mortar 1:3 (1 cement : 3 fine sand) as per standard design : |
| 57 | Grading for roof water proofing treatment with:Cement concrete1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) with water proof compound as per manufacture\"s specification. |
| 58 | Providing and fixing pressed steel door frames confirming to IS 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle ofsection50x25mm,orbasetiesof1.25mmpressedmildsteelweldedor rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applyinga coat of approved steelprimerafterpre-treatmentofthesurfaceincludingfillingwithCC 1:2:4(M15 grade) complete as directed by Engineer-in-charge : |
| 59 | ProfileC |
| 60 | Profile E |
| 61 | Providing and laying cement concrete including curing, compaction etc. completeinretainingwalls,returnwalls,walls(anythickness)including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, stringorlacingcourses,parapets,coping,bedblocks,anchorblocks,plain window sills,fillets,levelling course etcuptofloorfive levelexcluding the cost of centering and shuttering. |
| 62 | M15 grade Nominal Mix1: 2: 4 (1 cement: 2 coarse sand : 4 graded stoneaggregate 20mm nominal size). |
| 63 | Stone slab roofing on ground floor with fine grained stone slab from approved quarry including filling of jointsof parapet and slab on both sidesin cement sand mortar 1:4,with ceiling pointing in cement sand mortar 1 : 3 complete as per specification and instruction of Engineer In Charge |
| 64 | Providing & laying broken glazed titles on roof ( broken glazed tiles notlessthan9Kg/Sqm)[email protected] Kg/Sqm. (1.40Kg of VG-40(30/40)grade and0.30 Kg/Sqm. OfVG-10 (80/100) grade) and joints filled with cement mortar1 :2 (1 cement:2 marble dust mixed with water proofingcompund all complete as per direction of Engineer-in-charge. |
| 65 | ProvidingandfixinginpositioncollapsiblesteelshutterswithverticalM.S. Channels 20 x 10 x 2mm and bracket with flat iron diagonals 20 x 5mm. size withtopandbottomrailofT-iron40x40x6mm.with40mmdiasteel pulleys/ball bearing complete with bolts, nuts locking arrangements inside and outside stoppers, handles etc. as per specification including applying a priming coatofapprovedsteelprimer.(Tobemeasuredandpaidasperouter dimension). |
| 66 | Providingandfixing aluminumwork fordoors,windows,ventilatorsand partition with extruded built up standard tubular / appropriate Z sections and othersectionsofapproved make conformingto IS :733and IS:1285, fixed withrawlplugsandscrewsorwithfixingclips,orwithexpansionhold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth,rust free, straight ,mitered and jointed mechanically wherever required includingcleatangleAluminiumsnapbeadingforglazing/paneling,C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all completeasperarchitecturaldrawingsandthe directionsofEngineer-in– charge .(Glazing and paneling to be paid for separately). |
| 67 | For fixed portion |
| 68 | Forshutters builtup standard tubularsections of openable doors ,windows & ventilatorsincludingproviding&fixinghinges/rollersetc.andmaking provisionforfixingoffittingswhereverrequired(lockesshallbepaidfor separately). |
| 69 | Powder coating aluminum( minimum thickness of powder coating 50 micron) |
| 70 | Providingandfixing12mmthickprelaminatedthreelayermediumdensity (exteriorgrade)particleboardGradeI,TypeIIconformingtoIS:12823 bondedformaldehydesyntheticresin,ofapprovedbrand andmanufacture in paneling fixed in aluminium doors ,windows shutters and partition frames withC.P. brass / stainless steel screws etc. complete as per architectural drawings and direction of engineer-in-charge. |
| 71 | Prelaminated particle board with decorative lamination on both sides. |
| 72 | Providingandfixingglazinginaluminiumdoor,window,ventilatorshutters andpartitionsetc.withPVS/neoprenegasketetc.completeasperthe architectural drawings and the directions of engineer-in-charge.(Cost ofaluminium snap beading shall be paid in basicitem.) |
| 73 | Withfloatglasspanesof5.0mmthickness(weightnotlessthan13.50 kg/sqm) |
| 74 | Providingand fixing double action hydraulicfloorspring ofapproved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece M.S. |
| 75 | Providing and fixing 100mm brass locks(best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. |
| 76 | Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. Complete as per direction of Engineer-in-charge |
| 77 | Powder coated minimum thickness 50 micron aluminium |
| 78 | Providingandfixingexpandedgrillmadeofaluminumasperdesignand drawing having members section of size 7.5mm x 6.0mm and opening of size 102mmx99mmtoaluminumwindow/ventwithrequiredscrews,YandH aluminiumsec(asperdrawing)attheendsandmiddlejointsrespectively complete in all respect as per direction of engineer in charge. |
| 79 | Powder coating aluminum( minimum thickness of powder coating 50 micron) |
| 80 | Supply and fixing in cement mortar welded hand railing made out of MS round or square bars, flats etc. for staircase or verandah as per design complete in all respect (wooden or PVC hand railing to be paid extra) with priming coat of red oxide. for providing D typepipe head as top of hand railing |
| 81 | Providing and fixing steel gate, grating , and grillsmade of angles, tees,square bars, flats,orblackpipewithholdfastandfittingscompleteasperdesignanddrawing includingcuttingweldingandfabricationwithprimingcoatofredoxideExtraifsquare,rectangular hollow tubelarsections are used or grill made by flats only |
| 82 | Providing&fixingUVstabilisedfiberglassreinforcedplasticsheetroofingupto any pitch including fixing with polymer coated ‘J’ or ‘L’ hooks, bolts & nuts 8mm dia. G.I plain/bitumen washerscompletebutexcluding thecostof purlins, rafters,trussesetc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% Ultra-voilet stabiliser in resin system under approximately 2400 psi and hot cured. Theyshallbeofuniformpigmentationandthicknesswithoutairpocketsandshall confoim to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 5.0mm thick (Wt. 8.4 Kg./Mtr. Sq.) |
| 83 | Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wallthicknessof 5mm,madeoutofextruded5mmrigidPVCfoamsheet mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mmM.S.squaretube,theverticaldoorprofilestobereinforcedwith19x19mmM.S.squaretubeof19gauge,EPDMrubbergasketweathersealtobe provided through out the frame. The door frame to be fixed to the wall usingM.S.screwsof65/100mmsizecompleteaspermanufacturersspecification and direction of Engineer-in-Charge. |
| 84 | Providing and fixing to existing door frames.30mm thick factory made solid panelPVCdoorshutterconsistingofframemadeoutofM.S.tubesof19 gauge thickness and size of 19mm x 19mm for stiles and 15 mm x15mm , top &bottomrails.M.S.frameshallhaveacoatofsteelprimersofapproved make and manufacture M.S. frame covered with 5mm thick heat moulded PVC ‘C channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45 degree angle on either side forming stiles; and 5mm thick, 95mm wide PVC sheet out of which 75 mm shall be flat and 20mm shall be tapered in 45 degreeon the inner side to form top and bottom rail and 115mm wide PVC sheet out of which 75 mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top bottom and lock rails shall be provided either side of the panel. |
| 85 | 10mm (5mm x 2) thick, 20mm wide cross PVC sheet shall be provided as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with 7mm (5mm +2mm) thick x 15mm wide PVC sheet bending on inner side, and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ‘C Channel using PVC solvent adhesive etc.completeasperdirectionofEngineer-in-charge,manufacture’s specification & drawing.(For W.C.and bathroom door shutter). |
| 86 | Providing and laying ofpaver block as per IS 15658 : 2006 (Indian standard for precast concrete block for paving- specification) and IRC : SP:63-2004 (guidelines for the use of interlockingconcreteblockpavement)M-35,60mmthicktobeusedinlighttraffic (Light traffic is defined as a daily traffic up to 150 commercial vehicles exceeding 30 KN laden weight, or an equivalent up to 0.5 million standard axles (MSA) for a design life of 20 years(A standard axle is defined as a single axle load of 81.6 KN) like pedestrian plazas, shopping complexes ramps, car parks, office driveways , housing colonies, office complexes, rural roads with low volume traffic, farm houses , beach sites, tourist resorts, local authority footways, residential roads, etc. Category‘B’ Denated only two side like I,Z,T shape etc. as per IRC SP63:2004 |
| 87 | P & F 1st qualityVitrified Porcelain Polished tiles on floor, skirting and steps etc.indifferentsizes(thicknesstobespecifiedbymanufactuer)withwater absortion less than 0.08% and conforming to IS 15622 of approved make in all colourand shade, laid with20mm thick CM1:4includinggrounting the joints with white cement and matching pigment etc complete. size 600 mm X 600 mm |
| 88 | Providing and fixing fully panelled/partly panelled/double leaf shutter frame for doors as per approved design and drawings with approved ordinary C.P./ oxidised steel fittings as per Annexure - \"A\" and width of styles & top rails of 100mm and lock rails width of 150mm and bottom rails of 200mm width including teak wood beading of size 19mm x12mm on both faces complete : |
| 89 | 30 mm thickNigeria wood grade I |
| 90 | Providing and fixing wood panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling forpanelled and glazed shutter 25 mm to 40 mm thick |
| 91 | Wire gauge 24 gauge 14 mesh of IS 1568-1970 marked 85 gauge of dia 0.56 mm |
| 92 | Providing and fixing 1mm thick M.S. sheet garrage door shutters with frame of 40 x 40 x 6mm. angle iron 3mm M.S. gusset plates at the junction and corners including all fittings and applying a coat of approved steel primer : (Excluding cost of frames) |
| 93 | Using flats 30 x 6mm for diagonal braces and central cross piece. |
| 94 | Filling of sunk portion of roof with earthen pots of required height including filling voids with 1:3:6 light concrete, using brick batscomplete levelling and dressing the surface by 50mm thick cement concrete 1:2:4 as per specification. |
| 95 | Cementconcreteflooring1:2:4(1cement:2coarsesand:4gradedstone aggregate) finished with a floating coat of neat cement including cement slurry, makingoflinesorgrooveetccompletebutexcludingthecostofnosingof steps etc. complete.40mmthickwith20mmthicknominalsizeaggregate. |
| 96 | (Sanitary Works) P & F Indian typewhite glazed vitreous china 1st quality W.C. orissa pan (IS:2556Mark)with100mm vitreouschinaPorStrapincludingcutting and making good the wall and floor: |
| 97 | Size 580x440mm. |
| 98 | P & F European type white glazed vitreous china 1st quality W.C pan (IS : 2556 Mark) with P or S trap including cutting and making good the wall and floor |
| 99 | P & F water closet Seat Covers with brass hinges complete : |
| 100 | -do- White. |
| 101 | P& FJetspray forwatercloset with C.P.CopperTube flange of approved make. |
| 102 | P & F G.I. pipes (Internal Work) with G.I. Fittings excluding union (IS:1239 Mark) & MS clamps including cutting and making good the walls and floors: |
| 103 | 15mm dia nominal bore \"\"B\" Class |
| 104 | P & F G.I. pipes (Internal Work) with G.I. Fittings excluding union (IS:1239 Mark) & MS clamps including cutting and making good the walls and floors: |
| 105 | 25mm dia nominal bore \"\"B\" Class |
| 106 | P & F G.I. Pipes (External Work) with G.I. fittings excluding union (IS : 1239 Mark) including trenching & refilling earth etc. |
| 107 | 15mm dia nominal bore \"\"B\" Class |
| 108 | 25mm dia nominal bore\"\"B\" Class |
| 109 | Supply & fixing G.I. Union ISI marked in G.I. pipe line as required complete in all respect of size : |
| 110 | 15mm dia nominal bore |
| 111 | 25mm dia nominal bore |
| 112 | P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make: |
| 113 | C.P. Brass bib cock,15mm nominal bore. |
| 114 | (-do-) Long body, 15mm nominal bore weight not less than 690 gm |
| 115 | P & F Ball Cock (IS :1703 Mark) with Rod& P.V.C. Ball complete : |
| 116 | Brass wt. Not less than 300 gm,15mm. |
| 117 | P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. |
| 118 | ---do--- with 37 cm long pipe and nut. |
| 119 | P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make : |
| 120 | Gun-metal 15mm nominal bore. |
| 121 | (-do-) 25mm nominal bore. |
| 122 | Construction of Cement Concrete Chamber125mm dia. |
| 123 | Stainless Steel Sheet Grating |
| 124 | P & F WVC wash basin (1st quality, I.S. : 2556 Mark) of approved make withC.I. brackets duly painted,1 No. 15 mm C.P. Pillar cock (IS : 8934 Mark) & 32 mm C.P. brass waste coupling of approved make,25 mm G.I. waste pipe complete including cutting & making good the wall.: |
| 125 | Size 550 mm x 400 mm |
| 126 | P & F PVC Storage Tank (IS : 12701marked indicating theBIS license No), ofapproved make with cover,25mm dia1Mlong G.I.over-flow pipe &25 Cm. long wash out pipe with plug & socket, including making connection etc.,complete of approved design: |
| 127 | 500 litres capacity. |
| 128 | Hoisting Charges for each floor :500 litres capacity. |
| 129 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes TypeBforscilandwastedischargesystem(IS:13592:1992Marked)of approved quality /make |
| 130 | 110 mm dia |
| 131 | 75 mm dia |
| 132 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings Type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make |
| 133 | Nahni trap without Jali 4\", 110mm dia |
| 134 | Bend 87.5Dg. |
| 135 | 75 mm Dia |
| 136 | 110 mm Dia |
| 137 | Single Tee |
| 138 | 75 mm Dia |
| 139 | 110 mm Dia |
| 140 | Socket Plug |
| 141 | 75 mm Dia |
| 142 | 110 mm Dia |
| 143 | Single tee with door |
| 144 | 75 mm Dia |
| 145 | 110 mm Dia |
| 146 | Vent cowel |
| 147 | 75 mm Dia |
| 148 | 110 mm Dia |
| 149 | Construction of septic Tank in all types of soil with 40 Cm .thick masonry in CM1:6,15Cm thickC.Cbedof1:5:10,M-15gradeC.Cflooring&over stoneslabcovering,80mmthickslab,jointingofslabinCM1:3.Ralthal, Kharanja,50 mm thick stone partition walls, 20 mm thick plaster in CM 1:6 finished with neat floating cement, 4 Nos C.I foot rests of approved design ,two No. 450 mm dia each Ferro cementcover with frame, earth work etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 mtr:-Size 230x110x150 cm.(for 20 users) |
| 150 | Constructionofsoakagewellinalltypeofsoilwith300mmthickdry masonry, top and bottom 300 mm course in CM 1:6, 80mm thick stone slab, jointing of slab in CM 1 : 3, Ralthal, Kharanja, 40 mm thick M-15 grade C.C flooring ,earthwork complete asperapproved drawing includingdisposal of earth within a lead of 50 mtr.: |
| 151 | Size 240 Cm. dia outside & 240 Cm. depth. |
| 152 | Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m 10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring ,earthwork etc. complet |
| 153 | Inside size 300 X 300 mm depth upto 0.5 MCement cover with frame. |
| 154 | -do- size 450 x 450mm depth upto0.5 M Cement cover with frame |
| 155 | Construction of manhole in all type of soilinnersize 90 X60 Cm.450 mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5 10 in foundation, 20mmthickinsideplasterinCM1:6,finishedwithfloatingneatcement, 50mmthickM-15gradeC.C.flooring,makingchannels,80mmthickstone slab covering with 40mm thick M-15 grade C.C. flooring, Cement cover with frame of 450mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead. |
| 156 | Depth up to 0.5 M |
| 157 | Providing Laying & jointing glazed S.W. pipes grade `A` (IS;651 marked) of approvedmakewithspun yarn& stiffmixture ofcement mortar 1:1, excavation&refillingofearthinalltypesofsoilupto1.2mdepth,S.W.fittings, including testing of joints |
| 158 | 150mm dia |
| 159 | Providing&LayingC.C.1:5:10(Stoneaggregate40mmnominalsize)all around S.W. pipe including 15 Cm. thick bed concrete (Width W= Diameter of pipe in Cm+30 Cm.)( Excluding cost of pipe) |
| 160 | 150mm dia S.W. pipe |
| 161 | P & F Kitchen & Lab. Sink of approved make with C.I. brackets duly painted, 40 mm C.P. waste coupling, C.P.Brass chain with rubberplug, 40 mm G.I. waste pipe up-to floorlevel complete includingcutting and making good the wall&floor:1.0mm thickSalem stainlesssteelAISI-304kitchensinkof approved make (Nirali, Neel – kanth, Jaina, Faber-Castell )with large waste coupling.22x18x7 20x16x7 |
| 162 | P&FFlushCock / FlushValve (IS :9758Mark)forWCofapproved quality make : |
| 163 | (-do-)exposed 25mm nominal bore. |
| 164 | P & F Low level Flushing Cisternof 10 litres capacity (IS : 2556mark). Of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS: 1703 mark) complete including cuttingand making good the wall: |
| 165 | PVC with PVCbend as per IS : 7231 . |
| 166 | P & F lst quality WVCUrinal (IS:2556 mark) with 25mm dia G.I. waste pipe, dome waste couplings, concealed iron brackets or screws etc complete. |
| 167 | Flat Back (large) or half stall size 610x400x80mm. |
| 168 | P&F Marble Urinal Partition slabboth sides polished of approved design cut from marble size 900x600mm. |
| 169 | Makrana `Adanga` or Raj Nagar 1St Quality White or Andhi Indo-Italian marble. |
| 170 | P & F C.P. brass Urinal Spreaderfor stall urinal of approved make. |
| 171 | P & F Towel Rail or Ringof approved quality/make: |
| 172 | C.P. brass Towel Rail elbow type with concealed screws size 600 mm (Heavy duty). |
| 173 | C.P. Brass Towel Ring revolving type |
| 174 | P & F Soap Dish or Trayof approved quality/make |
| 175 | C.P. brass heavy and superior quality. |
| 176 | P & F Looking Mirrorswith P.V.C. frame of approved (Atul, Modi Guard , Saint Gobin or equivalent) |
| 177 | Size 500x400mm |
| 178 | P & F Bath Shower of approved quality/make.C.P. brass of Heavy & superior quality 150mm. |
| 179 | P & F Shower arm 15mm dia of approved quality/make. C.P.brass heavy & superior quality 220mmProjection. |
| 180 | P & F 15 mm. Dia Connection Pipeof approved quality/make : PVC pipe withC.P. Brass nuts upto length, 450mm |
| 181 | Construction ofOpen SurfaceDrainwith 112mmthick brickmasonryinCM 1:4,110mm thick base concrete 1:5:10, 37mm thick M-15 grade C.C. flooring ,12mm 1:4cementplasteronallexposedfacesofwallsincludingtopsurfaceexcavation& disposal of earth complete as per approved design/drawing:150mm drain,225mm Av. depth |
AI Tender Summary
Tender Timeline
Jun 21, 2024
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 25, 2024
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedJul 25, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 26, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender