tender for Work Of Conversion Of P And T To Piped Wss Konesa Tehsil Sarmathura To Provide Fhtcs Including One Year Defect Liability Period Under Jjm In The Jurisdiction Of Phed Division Bari Distt. Dholpur. Work Of Conversion Of P And T To Piped Wss Konesa Tehsil Sarmathura To Provide Fhtcs Including One Year Defect Liability Period Under Jjm In The Jurisdiction Of Phed Division Bari Distt. Dholpur., 1 Rising Main Pipe Line 2 Providing, lowering, laying in trenches, aligning, fixing in position and jointingDuctileIron(DI)ISI markedK-7gradeS&Spipesas per IS:8329-2000 (amendedup todate),withinternalcementmortar lining suitable for potablewater with rubber ring (EPDM)joints as per IS: 5382-1985 including all taxes (Central and local), transportation and freight charges, inspection charges, loading/ unloading charges,including cost of labour and material, specials (Tee, bend etc.) satisfactory hydraulic testing, disinfection, commissioning etc. complete as per technical specifications and direction of Engineer-in-charge. (excluding earth work) Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately.200 mm 3 Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in trenches for water supply pipe lines,shoring and strutting if required gradient and line including safety provisions using site rails and stacking excavated stuff including upto all required lead cleaning the site etc.complete for liftsup to 1.5 m depth and strata as specified. the work also includes depositing and refilling of trench with with watering & ramming / compacting in layers and disposal of surplus excavated soil as directed lead upto 50 meter. 4 Ordinary rock 5 Providing,lowering, aligning,fixingin positionin pipeline,CID/FSluicevalvesof approved make of following Pressure rating & dia complete, confirming to IS:14846 (amended up to date) and of following specifications: Body, Bonnet, Wedge, Gland, Thrust Plate, Cap & Hand wheel of Grey cast iron of IS:210/ FG200Stem - SS 304 ,Body Seat ring, Wedge facing ring & Bushes - LTB2/ SS, Face to face dimensions as per IS 14846/2000 (amended up to date), All exposed machined ferrous surfaces shall be painted with one coat of aluminium red oxide primer conforming to IS:5660 and two coats of black Japan paint conforming toType B of IS 341or paint conforming to IS9862 or IS2932( Non-Toxic- suitable for drinking water) applied inside and outside, Flanges Drilled as per IS 1538.Nut-Bolt confirming to IS:1363 and IS: 1367/ CS/ galvanised steel.Insersion rubber of black EPDM 6mm thick . Suitablesupport structure as per directions of EIC. Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge.Note: Rates are exclusive of tail piece/ dismantling joints and earth work.200 mm HW 6 Provision for construction of Sluice valve /Reflux valve Chambers of required size with 230 mm thick Brick masonary walls over 15 mm thick PCC 1:3:6, 20 mm thick plaster in CM 1:4 bothside, 40 mm thick CC 1:2:4 flooring and precast RCC lintel roof covering of required thickness as per approved drawing & designfor200 mm Sluice valves 7 Provision for DI/CI/MS specials such as Tee, Bends, Reducer, MS clamp, Valves tail piece etc. 8 Distribution Main Pipe Line 9 Providing , laying in trenches, aligning, fixing in position and jointing Ductile Iron (DI) ISI marked K-7 grade S&S pipes as per IS:8329-2000 (amended upto date), with internal cement mortar lining for potable water with rubber ring (EPDM/SBR) joints as per IS: 5382-1985 including all taxes ( Central and Local) transportation and frieght charges, inspection charges, loading/unloading charges,including cost of labour and material, specials ( Tee, Bend etc) satisfactory hydraulic testing, disinfection etc complete as per technical specifications and direction of Engineer-in-Charge of following class and diameter ( excluding earthwork)Note: Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately. 10 80 mm 11 100MM 12 150 MM 13 Providing, lowering, laying and jointing in trenches, standard lengths HDPEISI marked Pipes as per IS-4984: 1995 (amended up to date)with necessary jointing material like mechanical connectors, i.e. thread/ insert joint/ quick release coupler joint/ compression fitting joint or flanged joint and specials jointing pipe byelectro fusion welding method, including all taxes , transportation and freight charges, inspection charges, loading/ unloading charges, stacking of pipes, including cost of labour and material, specials (Tee, bend etc.), satisfactory hydraulic testing, disinfection, commissioning etc. complete as per technical specifications and direction of Engineer-in-charge of following class and diameter. (excluding earth work) .Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately.Supply may be in coil or straight length in 6 M/12 M.HDPE PE-80PN-6 14 75 mm dia 15 Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in trenches for water supply pipe lines,shoring and strutting if required gradient and line including safety provisions using site rails and stacking excavated stuff including upto all required lead cleaning the site etc.complete for liftsup to 1.5 m depth and strata as specified. the work also includes depositing and refilling of trench with with watering & ramming / compacting in layers and disposal of surplus excavated soil as directed lead upto 50 meter. 16 In all type of soil 17 Ordinary rock 18 Dismantling of cement concrete pavement for pipe line line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by CC cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. Measurement for dismantled trench to be madeas per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work. 19 Providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. Measurement for CC work to be madeas per standard trench width specified in tender document and no extra payment shallbe made for trench width more than specified,complete work as per technical specification and scope of work. 20 M10 grade Nominal Mix1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mmnominal size). 21 M20 grade Nominal Mix1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mmnominal size). 22 Providing,lowering, aligning,fixingin positionin pipeline,CID/FSluicevalvesof approved make of following Pressure rating & dia complete, confirming to IS:14846 (amended up to date) and of following specifications: Body, Bonnet, Wedge, Gland, Thrust Plate, Cap & Hand wheel of Grey cast iron of IS:210/ FG200Stem - SS 304 ,Body Seat ring, Wedge facing ring & Bushes - LTB2/ SS, Face to face dimensions as per IS 14846/2000 (amended up to date), All exposed machined ferrous surfaces shall be painted with one coat of aluminium red oxide primer conforming to IS:5660 and two coats of black Japan paint conforming toType B of IS 341or paint conforming to IS9862 or IS2932( Non-Toxic- suitable for drinking water) applied inside and outside, Flanges Drilled as per IS 1538.Nut-Bolt confirming to IS:1363 and IS: 1367/ CS/ galvanised steel.Insersion rubber of black EPDM 6mm thick . Suitablesupport structure as per directions of EIC. Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge.Note: Rates are exclusive of tail piece/ dismantling joints and earth work. 23 80 mm HW 24 100 mm HW 25 150 mm HW 26 Provision for construction of Sluice valve /Reflux valve Chambers of required size with 230 mm thick Brick masonary walls over 15 mm thick PCC 1:3:6, 20 mm thick plaster in CM 1:4 bothside, 40 mm thick CC 1:2:4 flooring and precast RCC lintel roof covering of required thickness as per approved drawing & design 27 for 100 mm Sluice valves 28 for 150 mm Sluice valves 29 Provision for DI/CI/MS specials such as Tee, Bends, Reducer, MS clamp, Valves tail piece etc. 30 FHTC 31 Provision for functional household tap connection in every house under scheme as per guide line Jal Jeevan Mission. 32 Data entryof existing FHTCs in rural area under JJM on website ejalshakti.gov.in;work includes visiting the village for collecting basic data consumers like i.e.adhar no/tation card/voter id /BPL card /Driving licence/password/PAN card /any data card/mobile no.etc.and entering the details on the above website. The cost also includes computer and operater.
