|
| 1 | Removing/Dismantling the existing plastering in walls/ceiling by manually, without damaging the existing structure and clearing the debris away from the site and Providing special plastering (patch plastering) with C.M 1:3, 20mm thick including the cost of all materials, lead, lift, labour, T&P, scaffolding charge, etc., complete as directed by the Engineers at site. |
| 2 | Colour washing/Painting the walls with two coats over one coat of primer using Asian, Apexor equivalent of approvedbrand of emulsion paintincluding cost of allmaterials, scaffolding, cleaning labour, lead and lift etc., complete. |
| 3 | Supply and fixing of MS grill for windows gates , Wicket gates and ventilators incluidng the cost of fabrication, transporting, and paintinglead, lift, etc., complete. |
| 4 | Painting for steel work with two coats of enameledpaintover a coat of red oxide[colour and brand should be got approved by site Engineer] including cost of all materials, lead, lifts, labour, etc, complete. |
| 5 | Supplying and fixingin position of anodized Al. glazed sliding window of size 1.18 x 1.48m as per ISS 1038-1958 (1245 ISS) using Al. sections window frame bottom two track sliding 61.85 x 31.75 x 1.50mm @ 0.909 Kg/m, top & side 61.85 x 31.75 x 1.50mm @ 0.784 Kg / m shutter plain out side 40 x 18 x 1.55mm @ 0.547 Kg /m shutter inner lock 40 x 18 x 1.45 mm @ 0.607 Kg /m shutter runner top & bottom 40 x 18 x 1.55mm @ 0.547 Kg / m with glazing clips rubber gaskets sliding wheel & 4 mm tk plain glass including cost of all materials, lock arrangements labour, lead, lift, etc., complete. |
| 6 | Supplying and fixing in position of aluminium anodised colour matt finish fixed type Ventilator of size 0.6x0.6m Ntype using extruded anodised aluminium sections in accordance with ISI 1868/1962 specification for an average anodic film thickness of not less than 15 microns of 63mm*37mm at 0.85kg/m with 4mm thick plain glass fixed with aluminium beading, rubber lining etc. including cost of all materials ,lead, lift and labour for fabricating and fixing in position, making holes in RCC columns , beams, masonry wherever necessary to the extent required and made good to the original condition after fixing as directed by the Department Engineer-in-charge etc., complete. |
| 7 | Supplying and fixing at anodized Aluminium door using 101.60x44.45x2.10 mm @1.608 kg/m box section for outer frame. 53.70x44.45x2.30 @ 1.238 kg/m door vertical and top 83.50x44.45x2.4mm box section for bottom panels with 9mm thick regular grade pre laminated particle board & top panel with 5.5mm thick clear glass including cost of alum. Clips rubber beedings alum. Fixtures such as tower bolt, pivot brass mortice lock handle,with hydralick Door closer etc. of approved quality including cost of all materials, labour, leads, lift etc. complete (1.00mx2.20msize single leaf) |
| 8 | Solid PVC Door Shutteres using 19 Gauge 19mm MS Square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick soild PVC sheets for panelling shall rigidly fixed in position includingnecessary furniture and fittings. The over all Size of styles shall be 50mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter. |
| 9 | Supplying, laying and jointing of PVC pipes ofapproved brand and ISI quality for waterline, sewerline, and rainwater downfall pipe etc., including cost of all materials and all PVC specials, fixing the pipes Conceiled/over BM/CC surfaces by taking grooves and fixing wooden plugs, screws firmly with special clamps as directed by the site Engineer. |
| 10 | 110mm dia PVC Pipe 6kg/sqcm |
| 11 | 32/25 mm dia PVC pipe 10kg/sqcm |
| 12 | Supplying and fixing inposition of GM gate valvebest quality such as leader, zeolite, zenith including cost of all special fixtures lead, lift,etc., complete. |
| 13 | 32/25 mm dia GM Gate valve |
| 14 | Supplying and fixing of 1000 lit capacity sintex tank of approved quality including cost of materials labour for fixing lead liftsetc., complete |
| 15 | Supplying and Providing open wiring to the lights & fan points, bulk head points with approved quality 2 x 1.5 sq. mm PVC unsheathed SC copper cable of 650v grade along with 1.0 sq.mm PVC unsheathed SC copper cable for earthing inside the suitable PVC rigid pipe with necessary bends, tees, junction box, ceiling house, houlders, etc, 5 Amps. single pole switch of approved quality fixing in a MS switch box of suitable size, etc, including cost of all materials, lead, lift, labour, etc., complete as directed by the Engineer at site and joiniting properly and making required holes in masonry or concrete and restoring the dismantled surface to original condition complete in all aspects. |
| 16 | Supplying and Providing open wiring to the 5 Amps. Plug points, with approved quality 2 x 1.5 sq. mm PVC unsheathed SC copper cable of 650v grade along with 14 SWG TC wire for earthing inside the suitable PVC rigid pipe with necessary bends, tees, junction box, etc, 5 Amps. single pole switch and 3/5 pin plug of approved quality fixing in a MS switch box of suitable size, etc., including cost of all materials, lead, lift, labour, etc., complete as directed by the Engineer at site and jointing properly properly and making required holes in masonry or concrete and restoring the dismantled surface to original condition complete in all aspects. |
| 17 | Supplying and Providing open wiring to the 15 Amps. Plung points, with approved quality 2 x 4 sq. mm PVC unsheathed SC copper cable of 650v grade along with 14 SWG TC wire for earthing inside the suitable PVC rigid pipe with necessary bends, tees, junction box, etc, 15 Amps. single pole switch and 3/5 pin plug of approcved quality fixing in a MS Switch box of suitable size, etc, including cost of all materials, lead, lift, lbaour, etc., complete as directed by the Engineer at site and jointing properly and making required holes in masonry or concrete and restoring the dismantled surface to original condition complete in all aspects. |
| 18 | Supplying and Providing open wiring, with approved quality 2 x 1.5 sq. mm PVC unsheathed SC copper conductor 650v grade along with 14 SWG TC wire for continues earthing inside the suitable PVC rigid pipe with necessary bends, tees, junction box, etc, including cost of all materials, lead, lift, lbaour, etc., complete as directed by the Engineer at site and jointing properly and making required holes in masonry or concrete and restoring the dismantled surface to original condition complete in all aspects. |
| 19 | Supplying and fixing the Industrial type horizontal three phase distribution board with MCBS 4 way / 18 way TPMCB sheet steel distribution boards flush type / surface type fitted with bus bars and natural links with three phase MCB outgoings and separate 4 way provisiion for accommodating one no 4 pole incoming MCB / Isolator and another searate 4 way provision for accommodating one no. 4 pole ELCB / RCD of approved quality and make and provisions for taking up vable for size not less then 35 sq.mm on suitable angle iron frame work MS cable entry boxes with PWD earthing, fixing on the wall with all connection properly including cost of all materials, lead, lift, labour, etc., complete as directed by the Engineer at site. |
| 20 | Supplying and fixing and testing of A.C. Ceiling fan complete 1200mm (48\") sweep with Down rod, regulator of approved quality frixing in the existing pipe / ceiling with all connection properly including cost of all materials, lead, lift, labour, etc., complete as directed by the Engineer at site. |
| 21 | Supplying and fixing of 18 / 20W 4 feet LED tube light of approved quality fixing in the existing wall with all connection properly including cost of all materials, lead, lift, labour, testing, etc., complete as directed by the Engineer at site. |
| 22 | Supplying and fixing and testing of A.C. Exhaust fan complete 450mm (18\") sweep with Down rod, regulator of approved quality frixing in the existing pipe / ceiling with all connection properly including cost of all materials, lead, lift, labour, etc., complete as directed by the Engineer at site. |
| 23 | Supplying and fixing ofwater closet with ‘P’ or ‘S’ trap with double flapped seat and seat cover with brass hinges and 10lit capacity PVC low level flushing tank with all fittings including cost of all materials,all leads, lifts, labour for fixing etc, complete as per standard specification. |
| 24 | Indian water closet |
| 25 | European water closet |
| 26 | Supplying and fixing of White glazed 550mm x 400 mm wash basin (ISI quality of approved brand)with all accessories such asC.I. brackets, C.P waste coupling, rubber plug and chain and all connection of water inlet and waste water connection , CP Angle cock. nylon connection, brass nipples,C.P.pillar tap etc., including CP soap container and 5mm thick mirror best quality approved brand. Mirror should be framed in anodized aluminium frame 2\"x16\" of size complete as per standard specification and as directed by engineer. |
| 27 | Lipped Mouth Porcelain Flat Back Urinal with all accessories such as 32mm dia Bell Mouth PVC Connection, 15mm dia GM Wheel Value, 15mm dia \"B\" Class GI Waste Water Pipe, 15mm dia Nylon Connection, 15mm dia brass nipple etc. |
| 28 | SGST |
| 29 | CGST |
| 30 | GST for bidders outside TamilNadu (IGST) |
