Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 08-07-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 15-07-2024 |
| 2 | 26-06-2024 | Revised BOQ | BOQ | 08-07-2024 |
| 3 | 25-06-2024 | Date Corrigendum | Date | 08-07-2024 |
| Sl. No. | Item Description |
| 1 | Dismantling plain corrugated CGI/PGI sheet in roof covering including redges completeall as specified and directed by Engineer-in-charge. |
| 2 | Supply and fixing 0.63mm thick galvanised, corrugated mild steel sheeting with two corrrugations side lap, fixed with coach screws and washers, in roofs, wall etc. with grade of zinc coating 275 completeall as specified and directed by Engineer-in-charge. |
| 3 | Supply and fixing 0.63mm thick galvanised, plain mild steel sheeting in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 completeall as specified and directed by Engineer-in-charge. |
| 4 | Material and labour for preparation of new steel and iron surfaces of any description over 10 Cm width or girth not otherwise described and applying two coats of synthetic enamel paint (camouflaged pattern) over a coat of red oxide primer over a coat of moderant solution to remove zinc coating complete all as specified and directed by Engineer-in-Charge. |
| 5 | Dismantling of wall or ceiling boards (fibre,pulp, insulation etc.) or insulation boards/slabs/blankets, any thickness including cover fillets completeall as specified and directed by Engineer-in-charge. |
| 6 | Providing & fixing false ceiling at all heights with GRS (Semi preforated micro 12mm thick trangular edge GRS false ceiling tile) false ceiling tile of size 595 X 595 mm of approved texture ,design and pattern having moisture content less then 2 %, humidity resistance of 99%,NRCO .50 to 0.75 as per IS 8225 :1987, Noncmbustiibleas per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlockingmetel T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15 X 32 mm length 3000mm , cross-T of size 15 X 32 mm of length 1200mm to from grid module of size 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 hanger rod upto 1000mmlength and L shape level adjuster of size 85X25X2mm galvanised iron perimeter wall angle of size 24X24X0.40mm of length 3000mm to be fixed on periphery wall/partition with the help of plastic rawl plug at 450mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per direction of the Engr-in-Charge. |
| 7 | Taking down chowkats or frames including shutter exc 1.50 Sqm but not excedes 4.00Sqm completeall as specified and directed by Engineer-in-charge. |
| 8 | Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cutand fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories area exceeding 2.00sqm each complete all as specified and directed by Engineer-in-Charge.Note:- The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.) |
| 9 | Material and labour for 5.5 mm thick plain glass fixing and glazing with aluminium beading and rubber gasket including haking out old broken glassin aluminium door and window frame completeall as specified and directed by Engineer-in-charge. |
| 10 | Supply and fixing in repair galvanised mild steel wire cloth nominal dia of wire 0.56mm and average width of aperture 1.00mm in wooden/steel frame completeall as specified and directed by Engineer-in-charge. |
| 11 | Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with mitltichamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick glavanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [ casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass.Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose. |
| 12 | Supply and fixing of 20mm thick uPVC pannles for fixing to Ypvc door framecompleteall as specified and directed by Engineer-in-charge. |
| 13 | Providing and fixing factory made uPVC white colour fixed windowmade of extruded profile with wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 58mm). T profile (Onevertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners 5mm thick glazing with selected quality glass (C) Area exceeding 2.00 Sqm each completeall as specified and directed by Engineer-in-charge.(Note:- The unitrate qouted by the contractor excludes cost of glass and includes all other connected accessories NeT opening will be measured for payment purpose.) |
| 14 | Supply and fixing Solid PVC Door Frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, suppling & Fixing in opening as per specification & drawing completeall as specified and directed by Engineer-in-charge. |
| 15 | Supply and fixing Factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC Sheet on the front face and 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per completeall as specified and directed by Engineer-in-charge. |
| 16 | Supply and fixing 100 mm butt hinges, heavy weight, cold rolled mild steel and fixed complete all as specified by Engr-in-charge. |
| 17 | Supply and fixing 150 mm size aluminium handles, cast type,anodised complete all as specified by Engr-in-charge. |
| 18 | Supply and fixing 150 mm aluminium anodised barrel tower bolts extruded section fixed complete all as specified by Engr-in-charge. |
| 19 | Supply and fixing in repair 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy completeall as specified and directed by Engineer-in-charge. |
| 20 | Demolition of brick work built in CM including all quoins arches pillars etc completeall as specified and directed by Engineer-in-charge. |
| 21 | Material and labour brick work with sub class \"B\" bricks in CM 1:6, straight or curved on plan exc 6 mtr nean radius, using old size bricks completeall as specified and directed by Engineer-in-charge. |
| 22 | Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specifiedand directed by Engineer-in-Charge. |
| 23 | Material and labour 15mm thick rendering in cement mortar 1:6 on fair faces of brick work surace rendering is to be even and smooth with out using extra cenent completeall as specified and directed by Engineer-in-charge. |
| 24 | Material and labour for preparation of new plastered surfaces and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm/lit and UV resistance as perIS 15489:2004, Alkali and funggal resistance , dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @1.43 litre/10 sqm over and including priming coat of exterior primer applieed @0.90litre/10sqm over new surfaces completeall as specified and directed by Engineer-in-charge. |
| 25 | Material and labour for preparation of old plastered surfaces and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm/lit and UV resistance as perIS 15489:2004, Alkali and funggal resistance , dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @1.43 litre/10 sqm over and including priming coat of exterior primer applieed @0.90litre/10sqm over new surfaces in camouflaged pattern completeall as specified and directed by Engineer-in-charge. |
| 26 | Material and labour for Preparation new surfaces of walls and applying two coats of oilemulsion distemper over a coat of 3 mm thick wall putty completeall as specified and directed by Engineer-in-charge. |
| 27 | Material and labour for Preparation of old decorated wall surfaces and applying two coats of Oil bound distemper onwalls over 3 mm thick wall care putty completeall as specified and directed by Engineer-in-charge. |
| 28 | Demolition of cement Concrete(unreinforced)in ground floors and pavings n exc 15 cm thickness (below or above ground level) or as in sunken complete. |
| 29 | Material and labour for 40mm thick PCC(1:2:4) type B-1 using 20mm graded crushed stone aggregate) as in floors completeall as specified and directed by Engineer-in-charge. |
| 30 | Supply and fixing vitrified ceramic tiles light shade, 10 mm thick (square/rectangular) polished, area of each tiles notexc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement or coloured cementto match including 15 mm thick screed bed in CM 1:4 completeall as specified and directed by Engineer-in-charge. |
| 31 | Material and labour Machine cut kota stone slab flooring 20-25mm thick over 20 mm cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishingcompleteall as specified and directed by Engineer-in-charge. |
| 32 | Material and labour Machine cut kota stone slabs flooring 20-25mm thick, as in riser of steps, skirting, dado and piller laid and the including screed bed over cement slurry screed 15mm thick in CM (1:4) incl rubbing and polishing, rounding or bullnosing the exposed edges completeall as specified and directed by Engineer-in-charge. |
| 33 | Dismantling floor hearth wall tiling (but not backing) removing servicable tiles to store rubbish off the premisses completeall as specified and directed by Engineer-in-charge. |
| 34 | Material and labour 15mm thick screed bed or bedding layer of cement mortar 1:4 to laying floor finish completeall as specified and directed by Engineer-in-charge. |
| 35 | Material and labour non skid ceramic colour tiles 7 to 8 mm thickjoint free edge cut(square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm(300mmx300mmx7 mmthick) set and jointed in neat cement slurry and pointed in colour cement to match as in floor completeall as specified and directed by Engineer-in-charge. |
| 36 | Material and labour glazed ceramic colour tiles 300mmx450mm/300mm x200mm x7mm thick set and jointed in neat cement slurry and pointed in coloured cement on vertical surfaces such as skirting/dado over cement mortar rendering/screding 10mm thick 1:4 completeall as specified and directed by Engineer-in-charge. |
| 37 | Supply and fixing 5mm thick PVC sheet fillet of width 35 mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing all as specified by Engineer-in-charge |
| 38 | Supply and fixing solid PVC wall lining consisting of 5mm thick wood grain printedPVC sheet inclusive of solvant cement and fixing at site on PVC frame as per specification and drawing all as specified by Engineer-in-charge. |
| 39 | Supply and fixing in repair vitreous chinaware wash hand basin white flat back size 550mm x 400mm excl taps, waste chain and plug and porecelain stopper but incl bracket and cutting for and pinning in ends of brackets or erecting stand completeall as specified and directed by Engineer-in-charge. |
| 40 | Supply and fixing in repairs vitreous china wash down water closet (Pedested patern ) white including fixing bolt, plastic water closet seat cover black/white closed pattern with flat bottom and cover and mild steel chromimum plated hinging device, fixed in repairs all as specified directed by Engr-in-Charge. |
| 41 | Supply and fixing Viterous china urinal flat back, size of 465x355x265mm white with grating and union for discharge p[ipe incl flush pipe grating and waste pipe completeall as specified and directed by Engineer-in-charge. |
| 42 | Supply and fixing in repair Hot and coldmixer fancy typesingle ordoublelegged cast copper alloy screwed down high pressure with crutch or butterfly handlescrewed both ends iron pipe suitable for 15mm bore pipe fixed to wash hand basin completeall as specified and directed by Engineer-in-charge. |
| 43 | Supply and fixing in repair PVC connection, 60cm long, 15mm in size with PTMT nust and PVC washers at both ends completeall as specified and directed by Engineer-in-charge. |
| 44 | Supply and fixing in repair 15mm Angle/stop/gate valves, fancy type chromium plated, screwed down, high pressure with crutch or butter fly handlescrewed at two right angles endsfor both iron pipe completeall as specified and directed by Engineer-in-charge. |
| 45 | Supply and fixing in repair stop/gate valve,15 mm cast copper alloy chromium plated fancy type with long shank & cup (concealed type) with capstan heads, screwed down, high pressure, with crutch or butterfly handle screwed for 15mm bore iron fixed completeall as specified and directed by Engineer-in-charge. |
| 46 | Supply and fixing in repair Bib taps cast copper alloy chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule 15mm bore, completeall as specified and directed by Engineer-in-charge. |
| 47 | Supply and fixing in repair PVC white low level flushing cistem 10ltrs capacity with all fittings syphonic action push stype with inlet ball valve and float incl PVC flush pipe, ball valve, handle, MS bracket etc completeall as specified and directed by Engineer-in-charge. |
| 48 | Supply and fixing in repair brass chhromium plated tubular tower rail20mm dia , D type, 60cm longbetween flanges completeall as specified and directed by Engineer-in-charge. |
| 49 | Supply and fixing in repair for 600 mm X450 mmlooking mirror of any size 5.5mm thick with aluminium frame selected quality mounted on 6mm thickcommercial ply wood and fixed to woodenplugs with chromium plated brass screw and cup washer completeall as specified and directed by Engineer-in-charge. |
| 50 | Taking down steel water tubing and connections, cleaning and refixing old 15 mm bore steel tubing and connections in new or old position with walls , ceiling, floors , etc completeall as specified and directed by Engineer-in-charge. |
| 51 | Taking down steel water tubing and connections, cleaning and refixing old 20 mm bore steel tubing and connections in new or old position with walls , ceiling, floors , etc completeall as specified and directed by Engineer-in-charge. |
| 52 | Supply and fixing medium grade steel water tubing, 15 mm bore galvanised (including taking down) with all fittings such as Union , Tank nipple with tank fittings and socket, elbow, nipple etc. and fixed complete to walls or laid in floors completeall as specified and directed by Engineer-in-charge. |
| 53 | Supply and fixing medium grade steel water tubing, 20 mm bore galvanised (including taking down) with all fittings such as Union , Tank nipple with tank fittings and socket, elbow, nipple etc. and fixed complete to walls or layed in floors completeall as specified and directed by Engineer-in-charge. |
| 54 | Cutting chases in brick wall, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth completeall as specified and directed by Engineer-in-charge. |
| 55 | Dismantling water tanks of capacity exc 500 ltrs but n.exc 1000 ltrs and removing from the site all as directed by Engr-in-charge. |
| 56 | Supply and fixing in repair rotational moulded,minimum 3 layers HDPE water storage tank of 1000 ltrs capacity(Cylindrical vertical with closed top)ISI marked fixed in position on existing places complete all as specified including 02 Nos 20mm dia full threaded GI tank niple, 20 mm dia PTMTfloat valve epoxy coated Aluminium rod with high density plastic float ball( of minium weight 210 gms ) and refixing of inlet, outlet & overflow pipe etc, completeall as specified and directed by Engineer-in-charge. |
| 57 | Supply and fixingin repair Stainless Steel curtain rod of20 mm diawith Stainless Steel bracket including Cp globe at both ends for each door and window, rings and side caps for every one meter fixed in position by drilling holes in walls and fixed the brackets with rawl plug and steel screw including CP globe on both ends for each door and window opening completeall as specified and directed by Engineer-in-charge. |
| 58 | Material and labour for providing and fixing stainless steel (Grade 304) railing made of hollow tube, channels, plates etc,including welding ,grinding,buffering, polishing and makiing curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, incuding fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrengement completeall as specified and directed by Engineer-in-charge. |
| 59 | Dismantling cast iron work of any description completeall as specified and directed by Engineer-in-charge. |
| 60 | Supply and fixingRolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting platesf Fe-410w(Gde-E-250) quality A completeall as specified and directed by Engineer-in-charge. |
| 61 | Preparation of newsteel surface of any description over 10 CM width or girth and applying two coats of synthetic enamel paintcompleteall as specified and directed by Engineer-in-charge. |
| 62 | Supply and fixing 75 mm PVC SWR bend completeall as specified and directed by Engineer-in-charge. |
| 63 | Supply and fixing 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenchesor in floors completeall as specified and directed by Engineer-in-charge. |
| 64 | Supply and fixing 110mm PVC cowl completeall as specified and directed by Engineer-in-charge. |
| 65 | Supply and fixing110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenchesor in floors completeall as specified and directed by Engineer-in-charge. |
| 66 | Supply and fixing110mm bore PVC (SWR), branch piece Single T completeall as specified and directed by Engineer-in-charge. |
| 67 | Supply and fixing75mm bore PVC (SWR), branch piece Single T completeall as specified and directed by Engineer-in-charge. |
| 68 | Supply and fixing 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall completeall as specified and directed by Engineer-in-charge. |
| 69 | Taking down old unserviceable/deteriorated batten/PVC/old rusted steel conduit point wiring from existing place i.e.light, fan, socket or power points complete with all unserviceable fittings such as switches, sockets, ceiling rose, pendants, Holders, etc and making good all disturbed surface to wall, floor etc by means of cement mortar (1:3) or plaster of Paris and to match / finish new surface as the existing surface either by using same colour distemper, Putti or white / colour wash all as required and directed by Engineer-in-Charge. |
| 70 | Taking down main switch/DB/ changeover/AC box of any capacity including fixing accessories of single/three phase complete all as specifiedand directed by Engineer-in-Charge. |
| 71 | Concealed point wiring on wall and surface on ceiling/roof with necessary fixing arrangements withPVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade drawn in and including rigid non metallic white / ivory PVC conduit medium grade ISI marked not less than 19 mm dia with all conduit accessories/ fittings such as junction boxes, bends, tee, elbow etc including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dollyand bakelite laminated sheet 3mm thick ISI marked for fixing of switches / sockets, fan regulators, wall mountingfittings, door bell & bulkhead/telephone socket etc with MS screw and cup washers including PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade for continuous earthing including cutting the chases and making good the surface by cement mortar (1:3) and for matching / finishing of new surfaces either by means of plaster of peris/Putti or distemper / colour wash with same existing colour surfaces all as specified and directed by Engineer-in-Charge for the following:-(a) One light, fan, bell point controlled by one switch. |
| 72 | All as per item No71 here-in-before but One light point controlled by two 2-way switch complete all as specifiedand directed by Engineer-in-Charge. |
| 73 | All as per item No71 here-in-before but One 5 Amp socket point controlled by one switch on same board complete all as specifiedand directed by Engineer-in-Charge. |
| 74 | All as per item No71 here-in-before but 5 Amp independent socket point controlled by one switch complete all as specifiedand directed by Engineer-in-Charge. |
| 75 | All as per item No71 here-in-before but for power point wiring with 2.5 SqmmPVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable and 1.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable as continuous earth lead complete all as specifiedand directed by Engineer-in-Charge. |
| 76 | Supply and fixing Modular switchsingle pole one way 5/6 Amps, 240 volts, white finish, ISI marked complete all as specifiedand directed by Engineer-in-Charge. |
| 77 | Supply and fixing Modular Switch single pole two way 5/6 Amps, 240 volts, white finish, ISI marked complete all as specifiedand directed by Engineer-in-Charge. |
| 78 | Supply and fixing Modular Switchsingle pole one way 16/20 Amps, 240 volts, white finish, ISI marked complete all as specifiedand directed by Engineer-in-Charge. |
| 79 | Supply and fixing Modular Socket outlet 5 pin, 5 Amps, 240 voltswhite finish, ISI marked complete all as specifiedand directed by Engineer-in-Charge. |
| 80 | Supply and fixing Modular Socket outlet 2 in 1, 3 pin, 5 &15 A, 240 volts white finish, ISI Marked complete all as specifiedand directed by Engineer-in-Charge. |
| 81 | Supply and fixing Modular Bell push, flush type 5 Amps white finish,ISI Marked complete all as specifiedand directed by Engineer-in-Charge. |
| 82 | Supply and fixing Modular metal flush box1/2 module with all fittings duly grouted in wall complete all as specifiedand directed by Engineer-in-Charge. |
| 83 | Supply and fixing Modular metal flush box3 module with all fittings duly grouted in wall complete all as specifiedand directed by Engineer-in-Charge. |
| 84 | Supply and fixing Modular metal flush box4 module with all fittings duly grouted in wall complete all as specifiedand directed by Engineer-in-Charge. |
| 85 | Supply and fixing Modular metal flush box6 module with all fittings duly grouted in wall complete all as specifiedand directed by Engineer-in-Charge. |
| 86 | Supply and fixing Modular white cover plate with frame 1/2 module complete all as specifiedand directed by Engineer-in-Charge. |
| 87 | Supply and fixing Modular white cover plate with frame 3 module complete all as specifiedand directed by Engineer-in-Charge. |
| 88 | Supply and fixing Modular white cover plate with frame 4 module complete all as specifiedand directed by Engineer-in-Charge. |
| 89 | Supply and fixing Modular white cover plate with frame 6 module complete all as specifiedand directed by Engineer-in-Charge. |
| 90 | Supply and fixing Door bell multi music type 230V, single pole,ISI Marked complete all as specifiedand directed by Engineer-in-Charge. |
| 91 | Supply and fixing Ceiling rose, surface backlite, 65 x 20 mm 3three terminal ISI Marked complete all as specifiedand directed by Engineer-in-Charge. |
| 92 | Supply and fixing Sheet metal enclosure VTPN MCCB DB 4way, 415 V (vertical type) with bus bar double door type IP 43 - IK 09 as per IEC 61439-3 suitable for flush mounting complete with 200 A copper bus bar for each phase with 2 neutral and 2 earth bus bars with cable ties for cable management for DB\"s when MCBs & MCCB100 Amps (as incomer)to be used, fixed properly in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs for cables/wires complete all as specifiedand directed by Engineer-in-Charge. |
| 93 | Supply and fixing Double door metallic sheet metal enclosure for DB when MCBs to be used SPN 12 ways, 240 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires complete all as specifiedand directed by Engineer-in-Charge. |
| 94 | Supply and fixing in repalcement MCB SP 240 volt 6 Amp to 32 amp 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specifiedand directed by Engineer-in-Charge. |
| 95 | All as per item srl No 94 but SPN 16-32 Amps complete all as specifiedand directed by Engineer-in-Charge. |
| 96 | Supply and fixing MCCB 100 Amps, 3 Pole, 415V, 16 KA thermal magnetic adjustable type with short circuit and overload protection complete all as specified and directed by Engr-in-charge. |
| 97 | Sheet metal enclosure, 32 A single pole and neutral with a two pin and earth plug and socket complete in metal clad board (Industrial type) with one single pole MCB 32 Amp fixed properly complete all as directed by Engr-in-Charge. |
| 98 | Sub main wiring with two single core PVC-FRLS insulated unsheathed multi stranded copper conductor cable of size 10 sqmm drawn in and including rigid non metallic white / ivory PVC conduit medium grade ISI marked not less than 19 mm dia with all conduit accessories/ fittings such as junction boxes, bends, tee, elbow etc laid in concealed position with 6 Sqmm PVC-FRLS insulated unsheathed multi stranded copper conductor as a continuous earth wire including cutting the chases and making good the surface by cement mortar (1:3) and for matching / finishing of new surfaces either by means of plaster of peris/Putti or distemper / colour wash with same existing colour surfaces all as specified and directed by Engineer-in-Charge. |
| 99 | Supply and fixinging ultra mordern LED luminaire 600 mm x 600 mm, 35/36 watt, 6000 K220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor of suitable size complete all as specifiedand directed by Engineer-in-Charge. |
| 100 | Supply and fixing Decorative ultra slimlinear LED lighting fixtures with extruded polycorbonate environmental friendly energy saver LEDlight fitting 1x16/20/22 watt (4\"), 230 Volts, single tube mounting including LED Tube20/22Watt, AC decorative type complete with electronic driver spring loaded rotory type lamp holder, end cover, connector box etc and accessories, prewired, LED including required fixing arrangements and electrical connection with three core copper cable from ceiling rose to led light fitting complete all as specifiedand directed by Engineer-in-Charge. |
| 101 | All as per item seritem No 100 here-in-before but 1x10/12 Watt (2\") mirror type with high output diffuser complete all as specifiedand directed by Engineer-in-Charge. |
| 102 | Supply and fixing Decorative LED wall light fixture made up of polycarbonate body suitable for 9 W LED lamp B22 base, 230 Volts, including LED lamp 9 Watt complete and electrical connection with three core copper cable from ceiling rose to LED light fitting complete all as specifiedand directed by Engineer-in-Charge. |
| 103 | Supply and fixing building security light fitting new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 including thermal management in multiple optics of 35 watt LED, 240 Volts inclbracket made out of GI pipe 25mm dia medium grade, 0.9 mtr long bent to shape with welded MS flat 25 x 6 mm for mounting of fitting & MS flat iron clamps made out of 25mmX 6mm thick FI nuts, bolts complete all as specified and directed by the Engr-in-charge. |
| 104 | Supply, fixing, installation and testing ofISI marked, energy efficient, water heater storage typemade of ultra-thick super cold rolled steel plates, incoloy glass-coated heating element offering superior heating performance, electrically operated, single phase, 50 Hz (BEE 5 star rating), complete of 25 Ltr capacity suitable to withstand 8 bar pressure with whirlflow technology and adjustable knob for convenient setting of temperature with and including supply and fixing, wire armoured 450 mm long, 15 mm dia brass coupler etc, flexible pipe suitable to withstand upto 100 degree celcius for hot and cold water, anchor fastner - 04 Nos of suitable size , 3 core PVC insulated, FRLS multistranded copper conductor cable and plug top 15 Amps capacity complete in all respect all as specified and directed by Engr-in-Charge. Note : Old unserviceable geyser is to be deposited to MES store yard. |
| 105 | Supply and fixing heavy duty exhaust fan AC single phase 230/240 V of size 300 mm sweep 1400 RPMwith louver & shutterincluding connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core and necessary grouting on wall complete and making good the wall surface after fixing of exhaust fan all as specified and directed by the Engr-in-charge. Note : Old unserviceable Exhaust fan is to be deposited to MES store yard. |
| 106 | Supply and fixing exhaust fan AC single phase 230/240 V of size 250/300 mm sweep, 1200 RPM made of sturdy engineering plastic with louver & shutter and copper winding including connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core and grouting on wall complete and making good the wall surface after fixing of exhaust fan complete all as specified and directed by the Engr-in-charge. |
| 107 | Material and labour for earthing complete with M.S. galvanized earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 M deep below normal GL) with top edge of the earth plate not less than 1.5M below normal GL, connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts & washers of GI or steel incl excavation, PCC (1:3:6) type C-1 chamber with RCC cover (1:2:4) type B0, 40 mm thick reinforced with 6 mm dia bar, 3 Nos. both way, 15 mm dia light grade GI protection pipe, funnel with wire mesh,watering pipe of size 20 mm dia med. grade, lugs, main Earthing lead upto 7.5 mtr incl. Charcoal dust, salt etc. all as shown in electrical plate No. 3 of SSR Part-I, 2009 specification.Note : Result of the earthing should beless then 4 ohms if not achieved the new earthing to be carried out without any extra cost. |
| 108 | Supply and Fixing copper strip 20x3mm complete with saddles/ insulators made out of PVC or fibre and fixing screws for roof conductor/down conductor including welding or brazing for joints all as required at site or asdirected by Engr-In-Charge. |
| 109 | Supply and Fixing GI tubing light grade50 mm dia, cut to size and bent to shape all as required at site including fixing arrangement with necessary clamps of required size at site and providing appropriate size of insulators to pipe from foundation of air termination rod complete all as specified and directed by Engr-in-charge. |
| 110 | Material and labour for air termination single pointed copper rod 12mm dia and 300mm long complete all as specified and directed by Engr-in-charge. |
| 111 | Material and labour for test point terminal block made of gun metal or phosphorus bronze of size 75X75X6mm drilled and screwed including 03 Nos 8mm dia 25mm long hexagonal head screw complete all as specified and directed by Engr-in-charge. |
| 112 | Earthing complete with copper earth plate electrode 600x600x3.15 mm thick buried directly in ground (Earth pit not less than 2.25 Mtr deep below normal ground level ) withtop edge of earth plate not less than 1.5 Mtr below normal ground level connected to copper strip 20X3 mm as earth lead by means of bolts, nuts washers and check nutsof steel/GI duly protected with 40 mm bore light grade pipe upto main board , 20mm bore watering pipe light gradewith CI/MS funnel and wire mesh including excavation, earth work in any type of soil and removing the surplus soil to a distance not exceeding 50 Mtr, add charcoaldust and common salt after mixing with BFC (Back Fill Compound) inadeqate quantity as recommended by the manufacturer oras diirectred by the Engr-in-charge all as shown in electrical plate No. 03 of SSR part-I 2009 having pit in PCC 1:2:4 type B-1 including angle iron frame made of angle iron of size 40x40x6mm grouted in PCC pit for CI cover of required size, funnel withwire mesh complete and all as specified and as directed by Engr-in-charge. |
| 113 | Taking up or down steel tubing of 50mm bore and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store complete with all fittings & valves etc. (Excavation shall be measured and paid separately under relevent items) complete and all as specified and as directed by Engr-in-charge. |
| 114 | Taking up or down steel tubing of 25mm bore and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store complete with all fittings & valves etc. (Excavation shall be measured and paid separately under relevent items) complete and all as specified and as directed by Engr-in-charge. |
| 115 | Material and labour for layingtubes medium grade galvanized with all fittings laid in trenches of size 25 mm bore dia complete and all as specified and as directed by Engr-in-charge. |
| 116 | Supply and fixing Gun metal globe or gate valve iron wheel head, screwed both ends for iron pipe of bore of 50 mm and length as required on site or directed by engineer-in-charge. |
| 117 | Supply and fixing Gun metal globe or gate valve iron wheel head, screwed both ends for iron pipe of bore of 25 mm and length as required on site or directed by engineer-in-charge. |
| 118 | Lagging to pipes all around with 40 mm thick bonded mineral wool performed `SNAP ON` pipe section of density 144 Kg/cum and provided with chicken mesh wirenetting 25 gauge , 20 mm mesh on pipe of internal dia 25 mm complete and all as specified and as directed by Engr-in-charge. |
| 119 | All as per item No. 119 above but for 50mm dia complete and all as specified and as directed by Engr-in-charge. |
| 120 | Construction of valve pit brick masonry, internal size 600x600x600mm(from top of PCC to bottom of cover) including excavation in any type of soil returning, filling around foundation are removal of surplus soil to a distance not exceeding 50m PCC 1:4:8 type D2 in foundation brick work in cement mortar 1:6, 6mm thick plaster in cement mortar 1:4 to internal surface covered pit with MS sheet cover 3 mm thick with locking arrangement handle fixing arrangement and painting with oil paint two coat over a coat of red oxide primer all as specified and as directed by Engr-in-charge. |
| 121 | Cutting existing GI distribution pipe line 50/40/25mm bore in position for making branch connection / insertion of Tee) including fitting or excavation and earth work complete and all as specified and as directed by Engr-in-charge. |
| 122 | Excavation in trenches in any type of soil, not exceeding 1.5m wide and not exceeding 1.5m in depth; for foundation, laying of cables and getting out complete all as specified & as directed by Engineer-in-charge. |
| 123 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm each layer complete and all as specified and as directed by Engr-in-charge. |
| 124 | Removing excavated material not exceeding 50 m and depositing where directed at a level not exceeding 1.5m above the starting point complete and all as specified and as directed by Engr-in-charge. |
| 125 | Supply, layingtesting and connecting 95 Sqmm 3.5 Core XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured heavy duty electrical cable with aluminium conductor, 1100 volts grade laid in trenches/ducts/wall or through pipe with suitable size of cable glands, crimping type cable lugs complete all as specified and directed by Engr-in-Charge. |
| 126 | Supply, layingtesting and connecting 120 Sqmm 3.5 Core XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured heavy duty electrical cable with aluminium conductor, 1100 volts grade laid in trenches/ducts/wall or through pipe with suitable size of cable glands, crimping type cable lugs complete all as specified and directed by Engr-in-Charge. |
| 127 | Removing excavated material not exceeding 50 m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed by Engr-in-Charge. |
| 128 | Sand cushioning to under ground cable 8 cm thick layer below the cable and 15cm thick above the cable complete all as specified and directed by Engr-in-Charge. |
| 129 | Brick protection with well burnt sub class ‘B’ brick a butting each other(width wise) across the cable laid in trenches complete all as specified and directed by Engr-in-Charge. |
| 130 | Fabrication, installation and testing of Feeder Pillar KIOSK type floor mounted dust/vermin proof indoor type of size 1.2x1.5x0.6 mtr, CPRI approved factory fabricated made out of MS sheet of thickness 3.15 mmmounted on angle iron legs made out of angle iron of size 40x40x6 mm with front & rear opening with locking arrangement, containing bus bar chamber to accommodate 3 phase & 1 neutral copper busbar of size 40x10 mm fixed on epoxy based insulators in horizontal position in upper part of panel separate chambers for 01 No. incomming MCCB and 03 Nos. outgoing MCCB connectedto busbar by copper strip of size 20x5 mm duly drilled hole for cable connectioin and powder coated with 7 tank process all as required at site or as directed by Engr-in-charge(including the PCC foudation of panel) complete including of following :-(a) MCCB 160 Amps FP 25KA (thermal, adjustable type, O/L & S/C Protection) - 01 No (I/C). (b) MCCB 100 Amps 3P 25 KA -02 Nos (O/G) (c) MCCB 63 Amps 3P 25 KA -02 Nos (O/G) (d) Digital Multi-function meter with CT\"s of required cap – 01 No. (e) LED type Indicator lamps (R, Y. B) – 01 Set. All accessories pre wired with suitable size copper conductor cable including making necessary arrangements for fixing all as required at site or directed. NOTE :1) All connections tobe done with proper size copper/ Brass Thimbels. ( 2) Control circuit wiring to be done with S/C copper wire complete all as specified and directed. |
| 131 | Earthing complete with galvanised steel earth plate electrode 600x600x3.15 mm thick buried directly in ground (Earth pit not less than 2.25 Mtr deep below normal ground level ) withtop edge of earth plate not less than 1.5 Mtr below normal ground level connected to GI strip 25X4 mm as earth lead by means of bolts, nuts washers and check nutsof steel/GI duly protected with 40 mm bore light grade pipe upto main board , 20mm bore watering pipe light gradewith CI/MS funnel and wire mesh including excavation, earth work in any type of soil and removing the surplus soil to a distance not exceeding 50 Mtr, add charcoaldust and common saltin adeqate quantity as recommended by the manufacturer oras directed by the Engr-in-charge all as shown in electrical plate No. 03 of SSR part-I 2009 having pit in PCC 1:2:4 type B-1 including angle iron frame made of angle iron of size 40x40x6mm grouted in PCC pit for CI cover of required size, funnel withwire mesh complete and all as specified and as directed by Engr-in-charge. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
