Housing Urban and Rular Development Government Departments Closing in 0 days TDR #43658064

Tender For Construction Of Court Of Civil Judge Cum Judicial Magistrate Bungalow.

Issued by Government Departments · jorethang, Sikkim
Tender Value
8.34 Crore
Estimated cost
Bid Submission
11 Jul 2024
0 days left
EMD
20.85 Lakhs
Bank guarantee accepted
Document Fee
1 Lakhs
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
jorethang → Sikkim
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Construction Of Court Of Civil Judge Cum Judicial Magistrate Bungalow. Construction Of Court Of Civil Judge Cum Judicial Magistrate Bungalow At Karfectar, Jorethang, Namchi District, Sikkim.

BOQ

Name of Work: Construction of Court of Civil Judge cum Judicial Magistrate’s Bungalow at Karfectar, Jorethang, Namchi District, Sikkim
Sl. No. Item Description
1Laying and Jointing PVC Pipe. Heading
2Excavation in soil in hilly area by mechanical means including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead upto 1000 metres.
3Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
4Providing and laying hand packed stone soling in building works with clean hard selected stone all complete. (Manual means).
5P/L in position cement concrete of 1:2:4(1 cement,2 coarse sand,4 graded stone aggregate of 20mm and down size) i/c compacting curing etc all complete.
6Providing and Laying damp proof coarse 40 mm thick with cement concrete 1:2:4 ( 1 cement, 2 Clean coarse sand, 4 graded stone aggregate 12.5 mm & nominal size) as per the direction of Engineer in Charge.
7Providing and Laying Plum concrete in 1:2:4 c.c. (1cement, 2coarse sand, 4clean hard graded stone chips of 20 mm down nominal gauge) with 70% cleanhard stone of sizes not exceeding 15cm including shuttering, compacting and curing complete, as per the direction ofEngineer in Charge.
8Filling inside plinth in building works with 23cm layers consolidated to 15cm i/c watering, ramming etc all complete.
9P/L coarse rubble stone masonary with hammer dressed clean hard selected stone in 1:3:6 cc (1 cement, 3 clean coarse sand, 6 clean hard graded stone chips of size 40mm nomonal size)i/c bond stone through stone of size 150mm x150mm x 450mm manufactued in 1:4:8(1 cement, 4 clean coarse sand,8 clean hard aggregate of size 40mm and down)curing etc all complete.
10P/L in position 1:1:2 reinforced cement concrete excluding the cost of the form work finishing and reinforcement.
11Supplying bending and placing in position tor-steel reinforcement in all R.C.C. works i/c cost of binding wires all complete.
12FORM WORK
13Providing fixing and removing form work for casting RCC items
14Footings
15Columns
16Beams
17Slab
18Providing and Laying first class brick work in one brick thick in superstructureof standard size bricks with 1:5 cement mortar (1cement and 5 clean coarse sand) as per the direction of Engineer in Charge includingcuring etc all complete.
19Providing and laying first class brick work in half brick thick in superstructure of standard size bricks with 1:4 cement mortar (1 cement and 4 course sand) including carriage of bricks up to work site, curing etc all complete.
20P/L 15mm thick cement plaster 1:3 mix in single coat i/c finishing even and smooth and curing etc all complete
21P/L white or colored glazed vitrified tiles of Orient/ Somani or equivalent colour in flooring, treads of steps landing etc laid on a bed of 15mm , cm 1:3 (1 cement, 3 coarse sand) finished with flush pointing with cement slurry as per the direction of Engineer In-charge and all complete.
22P/L white or colour glazed tiles anti skid( elegant, cashmere, egypcian rustic, celebrity, lara etc or equivelent)of glossy series of celebrity, elgent or equivelent in flossring treads of steps landing etc of size 300mm x 300mm laid on a bed of 15mm thick cement mortar 1:3 (1 cement, 3 clean coarse sand) finished with flush pointing with white cement slurry.
23Providing and Laying white or coloredglazed tiles of size 200mm x 300mm of plain/normal prints colours (white, grey, ivory, platinum, cream, glacier white, summers and, beach, wood duro, melody, or equivalent) in skirting, risers of steps and Dados on 12mm thick cement plaster (1cement, 3coarsed sand) 1:3 bare and jointed with white cement slurry.
24P/L flooring with granite marble stone slabs 20mm thick granite stone slabs flooring of size not less than 1.0 sqm of 20mm thick laid over 20mm 1:4 cm thick bare laid cement concrete and joint treated with white cement as per the direction of Engineer In Charge and carriage of materials up to work site all complete.
25P/F/F of dressed local timber in all types of frames complete.(Tooni, Katus equivalent) with imported timber from outsidethe state.
26Providing fitting and fixing in position of fully paneled shutters in windows and doors of champ timber or equivalent includingsteel butt hinges screws 12mm thick panels etc complete. (50mm thick panel door)
27Providing and fixing Hydraulic door closer with accessories and screws complete.
28P/F/F in position of fully glazed shutters in windows and doors of champ wood or equivalent including steel butt hinges, screws, 3mm glass panes of modi guard or equivalent etc complete. (50mm)
29Providing and fixing Brass bright finished brass butt hinges with necessary screws etc. complete.
30Doors
31Windows
32P/F/F sliding door bolts of size 300mm x16mm with nuts and screws etc all complete.(brass chromium plated)
33P/F/F of tower boltswith necessary screws etc complete.
34250 x 10mm
35150x10mm
36P/F/F handles size with necessary screws etc complete.
37125mm
38100mm
39P/F M.S or oxidized M.S Hook and Eyes with complete set. 150mm
40Providing and fixing M.S grills in timber frames of windows with M.S flats with nuts, bolts, and smooth finishing of welded joints/surface with Grills weighing8.00Kg/sqm as per the direction of Engineer - in- Chargeall complete
41S/F/F/F steel tubular trusses i/c cutting, hoisting fixing in position and applying a priming coat of approved steel primer, welded and bolted i/c special shape washer etc as per thestandard specification and design and direction of engineer in charge.
42Providing, fitting, fixing of 24 BWG pre-painted Hulas sheet roofing with lapping of 150mm (two corrugation) with G.I. hooks, bolts and nut 8mm dia with bitumen, GI limpet washers filled with white bad including carriage all complete.
43Providing fitting fixing ridges or hips of 60cm overall width of plain 24 BWG Pre-painted HULASSheet fixed with G.I, J or L hooks bolts and nuts 8mm dia Limpets, Bitumen washers complete.
44Providing, fitting and fixing 23cm deep 24BWG pre-painted Hulas sheet eaves board including (50mmx25mm) dressed sal timber beading and M.S. Rod brackets complete.
45Providing/fitting/fixing 25mm thick false ceiling/ panelling of dhupi or local timber in timber frames of timber equivalent to katus or pakha saaj or equivalent excluding the cost of polishing and including the cost of one coat priming on unexposed frame, with locally available timber.
46White washing three or more coats with white lime to give an even shade including cleaning the surface to remove dirt, dust, mortar drop etc on new surface complete.
47Providing and laying plaster of paris putty of 2mm thick over plastered surface to prepare the surface even and smooth all complete:
48Providing and painting with plastic emulsion two or more coats on new surface of required shade to give even shade i/c brushing and cleaning the surface to make the surface free from dirt, dust and smoothened the surface by sand papering all complete
49Providing and painting with acrylic exterior paints of quality and make equivalent to EXCEL,WEATHER SHIELD to give an even shade including brushing the surface clean of dirt,dust etc and sand papering and filling the scratches complete on new surface.
50Providing and applying priming coat with ready mixed pink on timber work i/c prepartion of the surface all complete.
51Providing and painting with ready mixed paint of approved quality & shade with two or more coats to give an even and smooth shade i/c cleaning the surface all complete.
52Providing and applying priming coat with ready mixed red oxide,Zinc chromate primer on steel/galvanised iron steel works including preparation of surface complete.
53Providing and painting with Aluminium paints two or more coats on new surface to give even shade including cleaning and preparing the surface complete new surface.
54Providing U shaped drain of 23cmx23cm of internal dimension with 1:2:4 plum concrete (40mm & down) side wall thickness of 23cm on both side with 1:3:6 (20mm & down) base concrete of thickness of 15cm with standard specification over 15 cm stone soling including 1:3 cement plaster with neat cement polishing & rounding of junction, as per the direction of Engineer in charge.
55Providing and fixing 15cm wide 45cm overall semicircular G.P sheet (Class I) gutter with iron brackets 40x3mm size, bolts, nuts, washers etc including making, connection with rain water pipes.
56Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). (Rate analysis enclosed)
57Loading and unloading of cement and steel (stock materials)
58Cost of haulage excluding loading and unloading.
59Loading and unloading of non stock materials
60Loading and unloading of sand
61Cost of haulage excluding loading and unloading.
62Loading and unloading of stone chips and stone.
63Stone Chips:
64Stone:
65Cost of haulage excluding loading and unloading.
66Haulage for throwing away of excavated earth via Surfaced Road excluding loading and unloading all complete.
67ANNEXE BUILDING
68Excavation in soil in hilly area by mechanical means including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead upto 1000 metres.
69Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
70Providing and laying hand packed stone soling in building works with clean hard selected stone all complete. (Manual means).
71P/L in position cement concrete of 1:2:4(1 cement,2 coarse sand,4 graded stone aggregate of 20mm and down size) i/c compacting curing etc all complete.
72Providing and Laying damp proof coarse 40 mm thick with cement concrete 1:2:4 ( 1 cement, 2 Clean coarse sand, 4 graded stone aggregate 12.5 mm & nominal size) as per the direction of Engineer in Charge.
73Providing and Laying Plum concrete in 1:2:4 c.c. (1cement, 2coarse sand, 4clean hard graded stone chips of 20 mm down nominal gauge) with 70% cleanhard stone of sizes not exceeding 15cm including shuttering, compacting and curing complete, as per the direction ofEngineer in Charge.
74Filling inside plinth in building works with 23cm layers consolidated to 15cm i/c watering, ramming etc all complete.
75P/L coarse rubble stone masonary with hammer dressed clean hard selected stone in 1:3:6 cc (1 cement, 3 clean coarse sand, 6 clean hard graded stone chips of size 40mm nomonal size)i/c bond stone through stone of size 150mm x150mm x 450mm manufactued in 1:4:8(1 cement, 4 clean coarse sand,8 clean hard aggregate of size 40mm and down)curing etc all complete.
76P/L in position 1:1:2 reinforced cement concrete excluding the cost of the form work finishing and reinforcement.
77Supplying bending and placing in position tor-steel reinforcement in all R.C.C. works i/c cost of binding wires all complete.
78FORM WORK
79Providing fixing and removing form work for casting RCC items
80Footings
81Columns
82Beams
83Slab
84Providing and Laying first class brick work in one brick thick in superstructureof standard size bricks with 1:5 cement mortar (1cement and 5 clean coarse sand) as per the direction of Engineer in Charge includingcuring etc all complete.
85Providing and laying first class brick work in half brick thick in superstructure of standard size bricks with 1:4 cement mortar (1 cement and 4 course sand) including carriage of bricks up to work site, curing etc all complete.
86P/L 15mm thick cement plaster 1:3 mix in single coat i/c finishing even and smooth and curing etc all complete
87P/L white or colored glazed vitrified tiles of Orient/ Somani or equivalent colour in flooring, treads of steps landing etc laid on a bed of 15mm , cm 1:3 (1 cement, 3 coarse sand) finished with flush pointing with cement slurry as per the direction of Engineer In-charge and all complete.
88P/L white or colour glazed tiles anti skid( elegant, cashmere, egypcian rustic, celebrity, lara etc or equivelent)of glossy series of celebrity, elgent or equivelent in flossring treads of steps landing etc of size 300mm x 300mm laid on a bed of 15mm thick cement mortar 1:3 (1 cement, 3 clean coarse sand) finished with flush pointing with white cement slurry.
89Providing and Laying white or coloredglazed tiles of size 200mm x 300mm of plain/normal prints colours (white, grey, ivory, platinum, cream, glacier white, summers and, beach, wood duro, melody, or equivalent) in skirting, risers of steps and Dados on 12mm thick cement plaster (1cement, 3coarsed sand) 1:3 bare and jointed with white cement slurry.
90P/L flooring with granite marble stone slabs 20mm thick granite stone slabs flooring of size not less than 1.0 sqm of 20mm thick laid over 20mm 1:4 cm thick bare laid cement concrete and joint treated with white cement as per the direction of Engineer In Charge and carriage of materials up to work site all complete.
91P/F/F of dressed local timber in all types of frames complete.(Tooni, Katus equivalent) with imported timber from outsidethe state.
92Providing fitting and fixing in position of fully paneled shutters in windows and doors of champ timber or equivalent includingsteel butt hinges screws 12mm thick panels etc complete. (50mm thick panel door)
93Providing and fixing Hydraulic door closer with accessories and screws complete.
94P/F/F in position of fully glazed shutters in windows and doors of champ wood or equivalent including steel butt hinges, screws, 3mm glass panes of modi guard or equivalent etc complete. (50mm)
95Providing and fixing Brass bright finished brass butt hinges with necessary screws etc. complete.
96Doors
97Windows
98P/F/F sliding door bolts of size 300mm x16mm with nuts and screws etc all complete.(brass chromium plated)
99P/F/F of tower boltswith necessary screws etc complete.
100250 x 10mm
101150x10mm
102P/F/F handles size with necessary screws etc complete.
103125mm
104100mm
105P/F M.S or oxidized M.S Hook and Eyes with complete set. 150mm
106Providing and fixing M.S grills in timber frames of windows with M.S flats with nuts, bolts, and smooth finishing of welded joints/surface with Grills weighing8.00Kg/sqm as per the direction of Engineer - in- Chargeall complete
107S/F/F/F steel tubular trusses i/c cutting, hoisting fixing in position and applying a priming coat of approved steel primer, welded and bolted i/c special shape washer etc as per thestandard specification and design and direction of engineer in charge.
108Providing, fitting, fixing of 24 BWG pre-painted Hulas sheet roofing with lapping of 150mm (two corrugation) with G.I. hooks, bolts and nut 8mm dia with bitumen, GI limpet washers filled with white bad including carriage all complete.
109Providing fitting fixing ridges or hips of 60cm overall width of plain 24 BWG Pre-painted HULASSheet fixed with G.I, J or L hooks bolts and nuts 8mm dia Limpets, Bitumen washers complete.
110Providing, fitting and fixing 23cm deep 24BWG pre-painted Hulas sheet eaves board including (50mmx25mm) dressed sal timber beading and M.S. Rod brackets complete.
111Providing/fitting/fixing 25mm thick false ceiling/ panelling of dhupi or local timber in timber frames of timber equivalent to katus or pakha saaj or equivalent excluding the cost of polishing and including the cost of one coat priming on unexposed frame, with locally available timber.
112White washing three or more coats with white lime to give an even shade including cleaning the surface to remove dirt, dust, mortar drop etc on new surface complete.
113Providing and laying plaster of paris putty of 2mm thick over plastered surface to prepare the surface even and smooth all complete:
114Providing and painting with plastic emulsion two or more coats on new surface of required shade to give even shade i/c brushing and cleaning the surface to make the surface free from dirt, dust and smoothened the surface by sand papering all complete
115Providing and painting with acrylic exterior paints of quality and make equivalent to EXCEL,WEATHER SHIELD to give an even shade including brushing the surface clean of dirt,dust etc and sand papering and filling the scratches complete on new surface.
116Providing and applying priming coat with ready mixed pink on timber work i/c prepartion of the surface all complete.
117Providing and painting with ready mixed paint of approved quality & shade with two or more coats to give an even and smooth shade i/c cleaning the surface all complete.
118Providing and applying priming coat with ready mixed red oxide,Zinc chromate primer on steel/galvanised iron steel works including preparation of surface complete.
119Providing and painting with Aluminium paints two or more coats on new surface to give even shade including cleaning and preparing the surface complete new surface.
120Providing U shaped drain of 23cmx23cm of internal dimension with 1:2:4 plum concrete (40mm & down) side wall thickness of 23cm on both side with 1:3:6 (20mm & down) base concrete of thickness of 15cm with standard specification over 15 cm stone soling including 1:3 cement plaster with neat cement polishing & rounding of junction, as per the direction of Engineer in charge.
121Providing and fixing 15cm wide 45cm overall semicircular G.P sheet (Class I) gutter with iron brackets 40x3mm size, bolts, nuts, washers etc including making, connection with rain water pipes.
122Loading and unloading of cement and steel (stock materials)
123Cement:
124Cost of haulage excluding loading and unloading.
125Loading and unloading of non stock materials
126Loading and unloading of sand
127Cost of haulage excluding loading and unloading.
128Loading and unloading of stone chips and stone.
129Stone Chips:
130Stone:
131Stone soling
132Cost of haulage excluding loading and unloading.
133Haulage for throwing away of excavated earth via Surfaced Road excluding loading and unloading all complete.
134GUARD ROOM
135Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
136Providing and laying hand packed stone soling in building works with clean hard selected stone all complete. (Manual means).
137P/L in position cement concrete of 1:2:4(1 cement,2 coarse sand,4 graded stone aggregate of 20mm and down size) i/c compacting curing etc all complete.
138Providing and Laying damp proof coarse 40 mm thick with cement concrete 1:2:4 ( 1 cement, 2 Clean coarse sand, 4 graded stone aggregate 12.5 mm & nominal size) as per the direction of Engineer in Charge.
139Filling inside plinth in building works with 23cm layers consolidated to 15cm i/c watering, ramming etc all complete.
140P/L coarse rubble stone masonary with hammer dressed clean hard selected stone in 1:3:6 cc (1 cement, 3 clean coarse sand, 6 clean hard graded stone chips of size 40mm nomonal size)i/c bond stone through stone of size 150mm x150mm x 450mm manufactued in 1:4:8(1 cement, 4 clean coarse sand,8 clean hard aggregate of size 40mm and down)curing etc all complete.
141P/L in position 1:1:2 reinforced cement concrete excluding the cost of the form work finishing and reinforcement.
142Supplying bending and placing in position tor-steel reinforcement in all R.C.C. works i/c cost of binding wires all complete.
143FORM WORK
144Providing fixing and removing form work for casting RCC items
145Footings
146Columns
147Beams
148Slab
149Providing and laying first class brick work in half brick thick in superstructure of standard size bricks with 1:4 cement mortar (1 cement and 4 course sand) including carriage of bricks up to work site, curing etc all complete.
150P/L 15mm thick cement plaster 1:3 mix in single coat i/c finishing even and smooth and curing etc all complete
151P/L white or colored glazed vitrified tiles of Orient/ Somani or equivalent colour in flooring, treads of steps landing etc laid on a bed of 15mm , cm 1:3 (1 cement, 3 coarse sand) finished with flush pointing with cement slurry as per the direction of Engineer In-charge and all complete.
152P/F/F of dressed local timber in all types of frames complete.(Tooni, Katus equivalent) with imported timber from outsidethe state.
153Providing fitting and fixing in position of fully paneled shutters in windows and doors of champ timber or equivalent includingsteel butt hinges screws 12mm thick panels etc complete. (50mm thick panel door)
154P/F/F in position of fully glazed shutters in windows and doors of champ wood or equivalent including steel butt hinges, screws, 3mm glass panes of modi guard or equivalent etc complete. (50mm)
155Providing and fixing Brass bright finished brass butt hinges with necessary screws etc. complete.
156Doors
157Windows
158P/F/F sliding door bolts of size 300mm x16mm with nuts and screws etc all complete.(brass chromium plated)
159P/F/F of tower boltswith necessary screws etc complete.
160250 x 10mm
161150x10mm
162P/F/F handles size with necessary screws etc complete.
163125mm
164100mm
165P/F M.S or oxidized M.S Hook and Eyes with complete set. 150mm
166Providing and fixing M.S grills in timber frames of windows with M.S flats with nuts, bolts, and smooth finishing of welded joints/surface with Grills weighing8.00Kg/sqm as per the direction of Engineer - in- Chargeall complete
167White washing three or more coats with white lime to give an even shade including cleaning the surface to remove dirt, dust, mortar drop etc on new surface complete.
168Providing and laying plaster of paris putty of 2mm thick over plastered surface to prepare the surface even and smooth all complete:
169Providing and painting with plastic emulsion two or more coats on new surface of required shade to give even shade i/c brushing and cleaning the surface to make the surface free from dirt, dust and smoothened the surface by sand papering all complete
170Providing and painting with acrylic exterior paints of quality and make equivalent to EXCEL,WEATHER SHIELD to give an even shade including brushing the surface clean of dirt,dust etc and sand papering and filling the scratches complete on new surface.
171Providing and applying priming coat with ready mixed pink on timber work i/c prepartion of the surface all complete.
172Providing and painting with ready mixed paint of approved quality & shade with two or more coats to give an even and smooth shade i/c cleaning the surface all complete.
173Providing and applying priming coat with ready mixed red oxide,Zinc chromate primer on steel/galvanised iron steel works including preparation of surface complete.
174Providing and painting with Aluminium paints two or more coats on new surface to give even shade including cleaning and preparing the surface complete new surface.
175Loading and unloading of cement and steel (stock materials)
176Cost of haulage excluding loading and unloading.
177Loading and unloading of non stock materials
178Loading and unloading of sand
179Cost of haulage excluding loading and unloading.
180Loading and unloading of stone chips and stone.
181Stone Chips:
182Stone:
183Cost of haulage excluding loading and unloading.
184BUNGLOW
185Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
186Providing and laying hand packed stone soling in building works with clean hard selected stones all complete.
187Providing & Layingin position cement concrete of 1 : 2 : 4(1 cement, 2 coarse sand, 4 graded stone aggregate of 20 mm and down size) including compacting curing etc. all complete.
188Providing and Laying damp proof course 40 mm thick with cement concrete 1:2:4 ( 1 cement, 2 Clean course sand, 4 graded stone aggregate 12.5 mm nominal size) with Recron 3S of fiber length6 or 12 mm (125 gm of recron 3S per a bag of cement) as per the direction in Engineer in Charge.
189Filling inside plinth in building works with 23 cm layers, consolidated to 15cm including watering, ramming etc. all complete.
190Providing and Laying Plum concrete in 1:2:4 c.c. (1cement, 2coarse sand, 4clean hard graded stone chips of 20 mm down nominal gauge) with 50% cleanhard stone of sizes not exceeding 15cm including shuttering, compacting and curing complete, as per the direction ofEngineer in Charge.
191Providing and Laying in position 1:1.5:3 Mix (1cement, 1.5 coarse sand 3 graded stone aggregate 20mm and down nominal gauge) of reinforced cement concrete excluding the cost of form work, finishing and reinforcements.
192Supplying, bending and placing in position ofTor steelreinforcement in all R.C.C works i/c cost of binding wires all complete.
193Providing, fixing & removing form work for casting R.C.C items as indicated below: with imported timber from outside the state)
194Foundation Base
195Square Columns
196Beam,lintels,girders,brersumers and cantilevers.
197Providing and laying first class brick work in half brick thick in superstructure of standard size bricks with 1:4 cement mortar ( 1 cement and 4 coarse sand ) including carriage of bricks upto work site and curing etc. all complete.
198Providing and Laying 20mm thick cement plaster of specified mix with Recorn 3S having a fiber lengthof4.8 mm ( 100 gm / bag of cement) in single coat including finishing even and smooth and curing etc all complete .
199Providing and Laying white or colored glazed vitrified tiles of classic colour or equivalent in flooring, treads of steps landing etc laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry.
200Providing and Laying white or colored glazed tilesanti skid ( elegant, cashmere, Egyptian rustic, celebrity, lara etc or equivalent) of glossy series or celebrity, elegant or equivalentin flooring, treads of steps landing etc of size 300mm x 300mm laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry.
201Providing and Laying flooring with granite marble stone slabs 20mm thick granite stone slabs flooring of size not less than 1.0 sqm of20mm thick laidover 20mm(average)1:4cm thick bare laid cement concrete and joint treated with white cement, mixed with matching pigment, curing including rubbing to give a granite finish, as per the direction of Engineer in Charge and carriage of material up to work site, all complete.
202Providing and Laying white orcolored or ceramicglazed tiles of size 200mm x 300mm Special colour (black, burgandy, pink, midnight blue, alpine blue or equavalent) in skirting , risers of steps and Dados on 12 mm thick cement plaster(1cement, 3coarse sand) finished with flush pointing with white cement slurry.
203Provision for Stone Cladding.
204Supplying, fabricating, fitting and fixing steel tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shape washer etc as per the standard specification and design and direction of Engineer - in- Chargeall complete.
205Providing, fitting, fixing of 24 BWG Pre-painted HULASsheet roofing with lapping of 150mm (two corrugation)with G.I. hooks, bolts and nut 8mm dia with bitumen, GI limpet washers filled with white bad including carriage all complete
206Providing, fitting and fixing 200mm x 25mm eaves board in dressed sal timber with 50mmx25mm beads in the same timber.
207Providing / Fitting / Fixing Gypsum board ceiling having composite thickness of 67mm consisting of frames and double skin 8.5mm thick glass reinforced gypsum (GRG)board manufactured by spray suction technique with high strength plaster of paris confirming to IS 8272 i/c providing and fixing frame works made of special section power pressed MS sheet and galvanized with Zinc coating of grade 175and consisting of floor and ceiling channel 50mm wide having equal flanges of 32mm width 0.50 m thick fixed to floor/ceiling at spacing 610 mm centre to centre by 6mm dia. bolts and nuts to both ends of ceiling (hang on truss)/ partition fixed on wall with rawl plugs) at the spacing of 450mm c/c and fixing of GRG boards to either frame work by 20mm long drive screws on studs, floors, ceiling channel spacing of 300mm c/c i/, join paper tapes i/c two coats of primer suitable for GRG board as per manufacture specification
208Providing/ fitting/ fixing of dressed sal timber in all types of frames complete.
209Providing, fitting and fixing water proof flush door shutters, solid block hard core construction with frame of 1st class hard timber with well matched 3mm teak ply decorative type on one faces of the shutters including hinges with screws complete.
210Providing and applying priming coat with ready mixed pink on timber work including preparation of the surface by thoroughly cleaning and sand papering etc complete.
211Providing and laying plaster of paris putty of 2mm thick over plastered surface to prepare the surface even and smooth all complete:
212Providing and Providing and painting with acrylic exterior paints of quality and make equivalent to EXCEL, WEATHER SHIELD to give an even shade including brushing the surface clean of dirt, dust etc and sand papering and filling the scratches complete on New surface.
213Providing and painting with ready mixedpaint of approved quality and shade with two or more coats to give an even and smooth shade including clearing the surface complete on new surface.
214Providing box drain of 60 cm (ht) x 45 cm (width) of internal dimension with 1:2:4 Plum concrete (40mm & down) side wall thickness of 23 cm (hill side) and 30 cm (road side) with1:3:6 (20 mm & down) base concrete of thickness of 15 cmwith standard specification over 15 cm stone soling including providing & laying guard stones, complete as per the direction of theEngineer-in-Charge.
215Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately)
216Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm andsingle glass pane glazing beadof appropriate dimension. (Area of window upto 0.75 sqm.)
217Providing & fixing brass bright finished butt hinges with necessary screws etc. complete.
218Providing, fitting and fixing sliding door bolts with nuts and screws etc. complete.
219Providing, fitting & fixing Handles 125 mm size with necessary screws etc. complete.
220Throwing of spoil within 26 km radius
221Cost of Haulage Excluding Loading and Unloading of stock material within a radius of 15 km by mechanical means all complete.
222Cost of Haulage Excluding Loading and Unloading of sand within a radius of 15 km by mechanical means all complete.
223Cost of Haulage Excluding Loading and Unloading of stone within a radius of 10 km by mechanical means all complete
224Cost of Haulage Excluding Loading and Unloading of stone chips within a radius of 10 km by mechanical means all complete
225Loading and Unloading of Cement or Steel by Manual Means and Stacking.
226Loading and Unloading of Stone Boulder/Stone aggregates/Sand/Kanker/Moorum.
227SITE LEVELLING AND PROTECTIVE WORKS
228Excavation in soil in hilly area by mechanical means including cuttting and trimming of side slope and disposing of earth with all lift and lead upto 1000meters.
229Earthwork in excavation by mechanical means (Hydraulic Excavator)/ meanual means in Foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) i/c dressing of all sides and ramming of bottoms, lift upto 1.5 mtr, including getting out theevcavated soil and disposal of surplus excvated soil as directed within a lead of 50 m . All kinds of soils.
230Providing and laying Plum concrete in 1:2:4 c.c. ( 1 cement, 2 coarse sand, 4 clean hard graded stone chips of 20 mm down nominal gauge) with 50% clean hard stone of sizes not exceeding 15 cm including shuttering, compacting and curing complete , as per direction of the engineer in charge.
231Providing and laying hand packed stone filling with clean hard selected stone etc all complete.
232Carriage of STOCK MATERIAL
233CEMENT
234Loading and unloading of cement by manual means and stacking.
235Carriage of NON-STOCK materials within 45 km to the worksite.
236SAND
237Loading and unloading of cement by manual means and stacking.
238Carriage of NON-STOCK materials within 45 km to the worksite.
239STONE
240Loading and unloading ofstones.
241WATER SUPPLY AND SANITATION
242Providing, fitting and fixing white vitreous china pedestal (European type) water closet (W.C) pan with seat and lid, with C.P. brass hinges, 10ltr low level cistern with fittings and brackets 40mm flush bend, 20mm overflow pipe with specials, including Providing and painting and making good the wall and floors as required all complete: W.C. pan European One pice (Ivory) CAT NO 92008
243Providing, fitting and fixing white vitreous china flat back or wall corner type lipped front urinal basin of size 440x315x325 mm with 5 ltrautomatic flushing cistern with C.I. brackets, GI flush pipe and spreaders with brass unions and G.I. clamps including cutting and making good the walls and floors as required all complete:
244P/F stain less steelkitchen sink with CI brackets, CP brass chain with rubber plug 40mm CP brass waste, CP brass tap etc complete i/c the fittings, cuttings and making good the wall wherever required.(610x450x200mm).
245Providing, fitting and fixing. white vitreous white china wash flat back basin with CI brackets, painted, 15mm CP brass pillar taps, CP brass chain with rubber plug, 32mm CP brass waste pipe, lead or PVC connection 32mm dia CP brass cap and unions,complete including cutting and making good the walls wherever required. HINDWARE.One basin with two pillar cock. (63cmX45cm)
246Providing and Fitting Pedestal white colour for of Hind Vitreous wash basin complete.
247P/F/F of other fitting items:
248Bib cock C.P
249Pillar cock 15mm dia
250Stop Cock
251Angular stop cock
252Providing fitting fixing of toilet paper holder
253Providing and fitting of slandered size mirror of quality equivalent to Admiral and size 20\"x16\" complete
254P/F/F of towel rail chromium plate
255P/F/F of porcelain soap dish
256Connecting Pipe
257Shower rose with arm
258P/F/F of soil waste and vent pipes i/c all complete.
259100 mm dia prince/supreme.
260160 mm dia prince/supreme.
261Bends 100mm
262Providing and placing on terrace high density polythylene water storage tank with man hole lid and suitable locking arrangements including making holes for inlet,outlet and ball cock including testing etc,all complete(Sintex or equivalent).2000Ltrs.
263Gateway Valve 15mm Dia
264SEPTIC TANK & SOAK PIT
265Clearing grass and removal of the rubbish upto a distance of 50 m outside the periphery of the area cleared.
266Excavation work by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50m.
267Providing and laying packed stone soiling in building works with clean hand selected stone all complete.
268Providing and laying 1:1.5:3 cement concrete (1cement,3 clean coarse sand & 6clean hand graded stone chips of required gauge 20mm down) including compacting curing etc all complete.
269Septic tank
270Providing fitting , fixing & removing form work for casting R.C.C items as indicated below: with imported timber from outside the state.
271a) wall
272Septic Tank
273Baffle wall
274b) slab
275Septic Tank
276P/L 1:1:2 R.C.C including centering,shuttering etc all complete/
277S/B/B & placing of tor steel in position as per the design & specification i/c the cost of binding wire all complete
278P/L 15mm thick cement plaster in 1:3 mix including curing wire all complete.
279Providing & laying hand packed stone filling in building work with clean hard selected stone all complete.
280Head load of stock materials for a distance beyond 30m and within 100m distance.
281CEMENT
282Loading & Unloading of stock-materials by Manual means.
283Cost of Haulages Excluding Loading & Unloading of Stock Materials (45 Km)
284Loading & Unloading of Non stock-materials by Manual means.
285Cost of Haulages Excluding Loading & Unloading of Non Stock Materials (45 Km)
286SAND
287STONE CHIPS
288STONE
289WATER SUPPLY AND SANITATION BUNGLOW
290Providing, fitting and fixing white vitreous china pedestal (European type) water closet (W.C) pan with seat and lid, with C.P. brass hinges, 10ltr low level cistern with fittings and brackets 40mm flush bend, 20mm overflow pipe with specials, including Providing and painting and making good the wall and floors as required all complete: W.C. pan European One pice (Ivory) CAT NO 92008
291Providing, fitting and fixing. white vitreous white china wash flat back basin with CI brackets, painted, 15mm CP brass pillar taps, CP brass chain with rubber plug, 32mm CP brass waste pipe, lead or PVC connection 32mm dia CP brass cap and unions,complete including cutting and making good the walls wherever required. HINDWARE
292(63 cm x 45 cm)
293P/F stain less steelkitchen sink with CI brackets, CP brass chain with rubber plug 40mm CP brass waste, CP brass tap etc complete i/c the fittings, cuttings and making good the wall wherever required.
294610 x 450 x 200 mm.
295Providing, fitting and fixing soil, waste and vent pipes including testing etc complete.
296100 mm dia. PRINCE / SUPREME or equivalent soil pipe
29775 mm dia. PRINCE / SUPREME or equivalent soil pipe
298Providing, fitting and fixing. bends of various types plain or a band with access door, insertion rubber washer 3mm thick bolts and nuts complete SCI or centrifugally cost spun sands pipes.
299100 mm dia. PRINCE / SUPREME or equivalent soil pipe
30075 mm dia. PRINCE / SUPREME or equivalent soil pipe
301Providing and fitting chromium plated toilet paper holder including the making holes and fixed to timber cleats with CP screws washer etc. all complete:.
302Providing, fitting and fixing. of chromium plated soap dish with necessary screw etc all complete.
303Providing, fitting and fixing towel rail of chromium plated brass complete with brackets fixed to the timber cleats, CP brass screws complete.
304Providing, fitting and fixing towel ring of chromium plated brass complete with CP brass screw and timber cleats.
305Providing, fitting and fixingBeveled gauge mirror of superior glass with 6mm A.C. sheets ground and fixed to timber cleats with CP screws, washer etc complete.
306INTERNAL WATER SUPPLY BUNGLOW
30715 mm outer dia CPVC pipes
30832 mm nominal outer dia Pipes
309Supply of Fittings
310Provision for engagement of labour for fitting & fixing of items vide item no (10 & 11)
311Pipe fitter -I :
312Pipe fitter -II :
313Helper
314Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO ORIGINAL)
315Bib Cock
316Angular Stop Cock
317Connecting Pipe
318Health Faucets
319Odonil Containeer
320Floor Trap/Waster coupling
321Gyser (25L)
322Shower
323Shower Mixer
324Brass Gateway Valve 32 mm dia
325PARKING YARD
326Preparation of surface treatment of formation, removing mud and slurry, watering to the extend needed to maintain the desired moisture content and rolling with 8-10 tonne roller
327Construction of Subgrade and Earthen Shoulder(Construction of Subgrade and earthen shoulders with approved materials obtained from borrow pits with leads and lift transportation to site, spreading, grading to required slope and compacted to meet the requirement)
328Granular sub-base with close graded material by mix in-place method (Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401)
329GRADING I
330Water Bound Macadam (providing , laying,spreading and compacting stone aggregates of specific sizes to water bonnd macadam specificationspreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnes in stages to proper grade andcamber,applying and broomingrequistite type of screening/binding materials to fill up the interstics of coarse aggregate,watering and compacting to the required density.)
331GRADING I
332Wet Mix Macadam (Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.)
333GRADING I
334Providing and applying primer coat with bitumen emulsion on prepared surface of ganular base including clearing of road surface and spraying primer in meduim porosity.
335Tack Coat (providing and applying tack coat with bitumen emulsion pressure distributor at requred rate on the prepared bitumen bituminious/granular surface with mechanical broom) in Granular Surface Treated with Primer, all complete.
336Dense Graded Bituminous Macadam (Providing and laying dense bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 Tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.0-4.5% by weight of total mix and filler, transporting the hot mix to work sitem laying with a hydrostatic paaver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause no. 507, complete in all respects).
337Bituminous Concrete (Providing and laying dense bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 Tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4-5.6% by weight of total mix and filler, transporting the hot mix to work sitem laying with a hydrostatic paaver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause no. 509, complete in all respects).
338Cost of Haulageof Stock Materials (BITUMEN) within 10 km Excluding loading and unloading
339Loading and unloading of Bitumen by manual means
340Carriage of STONE CHIPS within 10 km distance to the work site.
341Loading and unloading by manual means
342Carriage of STONE within 10 km distance to the work site.
343Loading and unloading by manual means
344Carriage of BINDING MATERIAL within 10 km distance to the work site.
345Loading and unloading by manual means
346LANDSCAPING BUNGLOW
347Excavation in soil in hilly area by manualmeans including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead upto 50 metres.
348Excavation in soil in hilly area by manualmeans including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead upto 50 metres.
349Sand filling in building works in layer not exceeding 20cum including watering, ramming etc, all complete.
350Supplying and stacking of selected earth at site all complete(Basic rate Sl.No M-163)
351Supply of organic manure ( sludge,farm- yard manure or/and good earth ) all complete. (Basic rate Sl. No. M-167 page 177)
352Spreading of Sludge Farm Yard Manure or/and good Earth (Spreading of sludge farm yard manure or/ and good earth in required thickness (cost of sludge,farm- yard manure or/and good earth to be paid for separately))
353Supply of Shrubs-(Basic rate Sl.No. M-166)
354Grassing with \" Doobs\" Grass (Grassing with \"Doobs\" grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for moving including supplying good earth if needed)
355Planting Permanent Hedges including Digging of Trenches (Planting permanent hedges including digging of trenches,60 cm wide and 45 cm deep,refilling the excavated earth mixed with farmyard manure,supplied at the rate of 4.65 cum per 100 metres and supplying and planting hedge plants at 30 cm apart)
356ENTRY GATE
357Earth work in excavation in foundation trenches i/c dressing of all sides, watering and ramming i/c disposal of excavated earth up[to 30m lead and lift upto 1.5 m, disposed earth to be levelled and neatly dressed as per the direction of the Engineer incharge.
358Providing and laying hand packed stone soling in building works with clean hard selected stone all complete.
359Proviing and Laying Cement Conrete 1:1:2(1 Cment,2Coarse sans,2graded tone aggregate of 20mm & down size including compactng curing et al omplete
360Providing and laying hand packed stone filling in building works with clean hard selected stones, all complete.
361Stone filling
362Mud filling
363Providing and Laying of R.C.C 1:1:2 mix(1cement,1coarse sand,2 graded stone aggregate of 20mm & down size including compacting and curing,all complete
364Supplying bending Binding of reinforcement as per design i/c cost of binding wires all complete.
365FORM WORK
366Providing, fixing & removing form work for casting R.C.C items as indicated below: with locally available timber)
367FOOTING
368COLUMN
369BEAM
370Supplying, fabricating, fitting and fixing tubular truss including putty, hoisting, fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shape washer etc complete in curve shaped Sikkim-style roofi
371Providing, fitting, fixing of 24 BWG Pre-painted HULASsheet roofing with lapping of 150mm (two corrugation)with G.I. hooks, bolts and nut 8mm dia with bitumen, GI limpet washers filled with white bad including carriage all complete
372Providing fitting fixing ridges or hips of 60cm overall width of plain 24 BWG Galvanized Sheet fixed with G.I, J or L hooks bolts and nuts 8mm dia Limpets, Bitumen washers complete.
373Providing fitting and fixing 30cm deep 24BWG Pre-painted HULAS sheet eaves board including (50x25mm) dressed sal timber beading and M.S. rod brackets all complete.
374a)P/L 15mm thick cement plaster 1:3mix in single coat i/c finishing even smooth and curing etc all complete
375Providing and laying plaster of paris putty of 2mm thick over lastered surface to prepare the surface even and smooth all complete:
376Providing and applying priming coat with ready mixed Red oxide, Zinc chromate primer on steel / galvanizedIron steel works including preparation of the surface complete.
377Providing and Providing and painting with plastic Emulsion paints two or more coats on New surface of required shade to give an even shade including brushing the surface clean of all dirt dust and smoothened by sand paper etc complete.
378Provision for Larriapa Painting on Sikkimese style RCC Gate
379Coast of Haulage of stock materials for the distance 10 km
380CEMENT
381Loading and Unloading of Cement or Steel by Manual Means and Stacking.
382Cost of haulage of non-stock materials for the distance 10km on surfaced road
383SAND
384Cost of Haulage of Stone chips for the distance 10km on surfaced road
385STONE CHIPS
386Cost of haulage of stone for the distance 10km on surfaced road
387STONE
388Loading and Unloading of Stone Boulder/Stone aggregates/Sand/Kanker/Moorum.
389FURNITURE
390Bed
391Centre table
392Chair
393Dressing table
394Dinning table
395Dinning chairs
396Wardrobe
397Sofa set
398Locker set
399Reception table
400Office table
401Office chairs
402Revolving Chiar
403Hall chairs
404Computer table
405Computer chairs
406Library shelves
407Library table
408Library chairs
409FURNITURE BUNGLOW
410Sofa Set
411Centre Table
412Office Table/Writing Table
413Revolving Chair
414TV Table
415Dressing Table and Stool Set
416Wardrobe
417Double Bed
418Single Bed
419Bedside table
420Dinning Table with 6 chair
421Visiting/Waiting Chair
422FIRE FIGHTING
423HYDRANT SYSTEM/ SPINKER
424Single headed hydrant valve as per IS 5290 type
425G.M short branch
426Hose pipe(RRL) 15m long gm coupling copper binding
427Hose reel 30m
428M.S fire hose box single
429M.S piping as per IS 1239, medium grade co Tata/ zindal mark M.S piping fitting
430100 mm
43180 mm
43240 mm
43325 mm
434Gate valve C.I 100 mm
4353 way fire brigade collection head
436Valve 1\" havey
437Air released valve
4384\" bend
4393\" bend
4403\" flanch
4414\" flanch
442Nut bold long
443Butter fly valve 100 mm
444Non return valve 100 mm
445PUMP HOUSE EQUIPMENT
446Electrical pump with 30 HP coupled with base plate
447Jockey pump with 15 HP coupled with base plate
448Composite control duel auto panel
449Pressure guage with cock
450Pressure switch with cock
451NRV 4\"/3\"
452Quarter valve/3/8 valve 1 Roll rubber gasket
453Nipple
45480/100 fitting RED/PRIMER COLOUR
455C.I strainer only
456Quarter socket
457Quarter nipple
4583/8 socket
4593/8 nipple
460Fast nut
4614\"u clamp
462Angle 1/2
463Reducers
464Reducers
465RCC WATER TANK UNDERGROUND 20000 ltrs
466FIRE TANK all pipe fittings Civil work pump house, road cutting rapping cotat, piller making cement sand chips stone & with fire pump house etc.
467FIRE EXTINGUSHER
468ABC TYPE FIRE EXTINGUSHER 6 KG CAPACITY
469CO2 TYPE FIRE EXTINGUSHER 4.5 KG
470Fire modular ceiling mounting 05 kg
471Fire ball
472Mechanical Foam 50ltrs
473FIRE ALARM SYSTEM
474Fire alarm panel 8 zone
475Hooter
476Manual call point
477Wire 1.5 mm
478smoke Detector
479Pvc pipe & all fitting etc.
480labour fitting & fixing charge
481INTERNAL ELECTRIFICATION
482INTERNAL WIRING
483Wiring for light/Fan/Call bell & 6 A plug point with 2x1.5 sqmmFRLSHPVC insulated copper conductor single core cable in best quality recessed alkathine pipe and earthing the point with 1x 1.5 sqmmHR FRLS PVC insulated copper conductor single core cable as required.
484Wiring for 16 A plug point with 2x 2.5 sqmmFRLSH PVC insulated copper conductor single core cable in best quality recessed alkathine pipeand earthing the point with 1x 2.5 sqmmFRLSH PVC insulated copper conductor single core cable as required.
485Wiring for sub-main for light/fan/call bell & 6 amps plug points with 2x 2.5 sqmmFRLSH PVC insulated copper conductor single core cable in best quality recessed alkathine pipe and earthing the point with 1x2.5 sqmm FRLSH PVC insulated copper conductor single core cable as required.
486Wiring for sub-main for 16 amps (2x1000W) plug points with 2x4.0 sqmm FRLSHPVC insulated copper conductor single core cable in best quality recessed alkathine pipeand earthing the point with 1x4.0 sqmm FRLSH PVC insulated copper conductor single core cable as required.
487Wiring for sub-mainwith2x 6.0 sqmm FRLSHPVC insulated copper conductor single core cable in best quality recessed alkathine pipeand earthing the point with1x 6.0 sqmmFRLSH PVC insulated copper conductor single core cable as required.
488Supplying & fixing Conduit inspection bend 1/2\",3/4\"1\"
489Supplying & fixing Conduit inspection Tee 1/2\",3/4\" & 1\"
490Supplying & fixing Conduit inspection round 1/2\",3/4\" & 1\"
491Supplying & fixing M.S. Box as junction purpose 100mm x 150mm
492Supplying & fixing M.S. Box as junction purpose 200mm x 150mm
493Supplying & fixing Bakelite sheet 125mm x 175mm
494Supplying & fixing Bakelite sheet 225mm x 175mm
495SWITCH,SOCKET AND ACCESSORIES
496Supplying & fixing 06 amps 1 way FT switch on white modular plate and metal flux box including connection etc. as required.
4971 no. 06 amps FT switch with 1 no white 1 modular plate and 1 modular metal flux box.
4982 no. 06 amps FT switch with 1 no white 2 modular plate and 2 modular metal flux box.
4993 no. 06 amps FT switch with 1 no white 3 modular plate and 3 modular metal flux box.
5004 no. 06 amps FT switch with 1 no white 4 modular plate and 4 modular metal flux box.
5016 no. 06 amps FT switch with 1 no white 6 modular plate and 6 modular metal flux box.
5028 no. 06 amps FT switch with 1 no white 8 modular plate and 8 modular metal flux box.
503Supplying & Fixing 1 no fan regulator 120W,in 1NO 2module white cover as required.
504Supplying & fixing 1 no. 16 amps socket, & 16 amps switch,white plate (4 module) & Metal flux box (4 module)includingconnection etc. as required.
505Supplying & fixing 1 no. 06 amps socket with 1no. 06 amps switch, 1 no. 3 module white plate & 1 no. 3 module metal flux box ) including connection etc. as required.
506Supplying & fixing 1 no. 2 way switch with 1 no 1module white plate & 1 no 1 module metal flux box including connection etc. as required.
507LIGHT FITTINGS ,FAN&ACCESSORIES
508Supplying & fixing LEDtube light fitting 22 watts 4 ftincluding connection etc. as required.
509Supplying & fixing Angle/Batten holder with 9 watts LED lampincluding connection etc. as required.
510Supplying & fixing recessedLED fitting 10 wattsincluding connection etc. as required.
511Supplying & fixing LEDbulk head fitting including connection etc. as required.
512Supplying & Fixing 48\"\"Ceiling fan Bajaj/Khaitan Or Eqivalent make complete with all accessories including connection as required.
513Supplying & fixing recessed mounted LED panel light fitting 2ft x 2ft 36 wattsincluding connection etc. as required.
514Supplying & fixing wall lamp fitting (Decorative) with LED lamp including connection etc. as required.
515Supplying & fixing LED wall mounting mirror light including connection etc. as required.
516Supplying, Installation, testing & commissioning of ventilating fan 250mmincluding connection as required.
517Supplying, Installation, testing & Wall mountingfan 18\"\"mmincluding connection as required.
518DISTRIBUTION SYSTEM & EARTHING
519L.T distribution switch board with copper bus bar, out-door type Kiosk, having electrolytic annealed copper bus bar 50x12mm for phase & 50x6mm for neutral circuits mounted on glazed porcelain or Bakelite base & fitted with voltmeter, ammeter, selector switches for ammeter & voltmeter, electronic KWH meter, indicating lamps cabin light, fabricated with 12 gauge M.S plain sheet, painted with anti- rust primer & two coats of Epoxy paint of shade 631 as per IS: 8623-1, front opening doors with gasket & locking arrangement complete with following incoming & outgoing controls:
520LTDB 200 A
521INCOMING:1 No. 200 A, 4P,50KA, MCCB
522OUTGOING: 3 Nos. 100A TP MCCB, 35 KA, & 1 No. 32A TP MCCB, 35 KA all with built in Thermo Magnetic Release.
523Supplying, installation, testing & commissioning of Copper Bus-bar chamber 4 pole 100 Amps
524Supplying, installation, testing & commissioning ofMiniature circuit breaker (CONFORMING TO CPWD /NBC/ Relevant IS & BIS Code)
525Four pole 63Amps
526Single pole 40 Amps
527Single pole 6 - 32 Amps
528Supplying, installation, testing & commissioning of Isolator(CONFORMING TO CPWD /NBC/ Relevant IS & BIS Code)Four pole 063 Amps
529Supplying & installation of MCB distribution board Double Door/Single door(CONFORMING TO CPWD /NBC/ Relevant IS & BIS Code)
53012 ways SPN (Single door)
53112 ways SPN(Double door)
5324 ways(TP & N)(Double-door)
533Providing, laying, testing & commissioning of 1.1 KV grade PVC insulated aluminium armoured conductor cable on surface of the wall of building with required size of aluminium shadle and screw etc. as required (10 mtrs)
5343.5 core 95 sqmm
535Supplying and Fixing of UPS 6KVA/192V Microtech/Equivalent
536Supplying and Fixing battery for UPS
537Providing and earthing 2 mtr. Long ASHLOK make encapsulated pipe system (Pipe in pipe technilogy) maintenance free safe earthing model T-19, outer dia of pipe 50mm & inner pipe dia 25mm and 1 bag back fill chemical compound
538Providing & laying 25mm x 5mm copper strip for looping earth from earth electrode fo main distribution board of the building
539Providing & laying 6/8 SWG Copper wire from main dist. Pannel to distribution system of the building.
540Supplying,installation , testing & commissioning of ON/OFFLOADChangeover Switch(CONFORMING TO CPWD /NBC/ Relevant IS & BIS Code): Fourpole 100 amps / 415 V
541STREET LIGHTING
5428.5 Mtrs. Long 410-SP-18 swaged type steel tubular pole with CI base plate & cap, double part ( Nuts & bolts type) working load 120 Kgs
543LED Street light 45 Watt
544G.I.street light bracket
545Landscape light fitting CONE NXG-IP65.CONENXGBLS8WLED 830PSYMTOPC
5464 Core x 6 sqmm LT armoured cable
5472 Core x 16 sqmm LT armoured cable
5481.5 sqmm ISI marked HRFRLS single core copper conductor cable (Havells)
549Polycarbonate junction box with bus bar arrangement & 6 Amp MCB
550G.I Earth Spikeconforming to IS 227.
551G.I. wire 6/8 SWG for earth
552Red oxide paint
553Aluminium paint
554PVC tape
555Concreting of 8.5 Mtrs. Lattice Structure / Swaged Steel Tubular Pole in 1:4:8 cc in 0.9x0.9x1.50 mtrs Pit, Construction of parapet 0.35 x 0.47x0.153 mtrs. In 1:3:6 cc i/c 12mm cement plaster of parapet in 1:4 Mix.
556Excavation of 0.45x0.90x1.00mtrs. Cable trench in mix soil & re-filling with available excavated earth & providing cement concrete on the top of the trench.
557INSTALLATION OF 63 KVA DIESEL GENERATOR
558D.G set62.5 kVA
559SAFE EARTHING MODEL T-19 SHORT CURRENT 20KA RMS FOR 1 SEC(LV / MV) APPLICATION : 50 mm diameter x 3 Mtrs. Electrode & two bags backfill chemical compound.
560Copper strip 25mm X 5mm
5613.5 Core x 50 sqmm LT armoured cable
562Sundries
563Construction of shed for DG set
564PA SYSTEM .
565Supply and Installation of P.A. SYSTEM 40 WATTS complete
566CONFERENCING SYSTEM .
567CBT 50LA JBL
568AMD 200 Australian Monitor
569WMS 40mini AKG
570TS-D1000CU TOA
571TS-D1000DU TOA
572TS-D1000-M1 TOA
573TS-D1000MU TOA
574Sundries
575ISCT (Reputed make)
57675 inch Smart LED TV (Panasonic)
577CCTV WITH SURVEILLANCE SYSTEM
578STAND ALONE DVR FULL HD 32 CHANNEL 1 AUDIO
579CCT`V CAMERAS (FULL HD) - 1.3 megapixel 20 mtr DOME
580CCT`V CAMERAS (FULL HD) - 1.3 megapixel 20 mtr BULLET
581CCT`V CAMERAS (FULL HD) - 1.3 metapixel 40 mtr BULLET
582HARD DISK DRIVE 4 TB SURVEILLANCE
583CAT-6 CABLE 6 PLY NETWORKING CABLE
584ACCESSORIES VIDEO BALOON
585ACCESSORIES 4/4 BOXES,CLIPS,TIES ETC
586POWER SUPPLY - 2 AMP SINGLE ADAPTER
587POWER SUPPLY - 12.5 Volt 10 AMP SMPS
588HDMI CABLE - 10 MTR
589AC ( AIR CONDITIONING) SYSTEM
590Supplying and installation of air conditioning system
591ELECTRIFICATION OF C.J.M\"S & J.M\"S BUNGALOW AT JORETHANG, DISTRICT - NAMCHI
592INTERNAL ELECTRIFICATION
593INTERNAL WIRING
594Wiring for light/Fan/Call bell & 6 A plug point with 2x1.5 sqmmFRLSHPVC insulated copper conductor single core cable in best quality recessed alkathine pipe and earthing the point with 1x 1.5 sqmmHR FRLS PVC insulated copper conductor single core cable as required.
595Wiring for 16 A plug point with 2x 2.5 sqmmFRLSH PVC insulated copper conductor single core cable in best quality recessed alkathine pipeand earthing the point with 1x 2.5 sqmmFRLSH PVC insulated copper conductor single core cable as required.
596Wiring for sub-main for light/fan/call bell & 6 amps plug points with 2x 2.5 sqmmFRLSH PVC insulated copper conductor single core cable in best quality recessed alkathine pipe and earthing the point with 1x2.5 sqmm FRLSH PVC insulated copper conductor single core cable as required.
597Wiring for sub-main for 16 amps (2x1000W) plug points with 2x4.0 sqmm FRLSHPVC insulated copper conductor single core cable in best quality recessed alkathine pipeand earthing the point with 1x4.0 sqmm FRLSH PVC insulated copper conductor single core cable as required.
598Wiring for sub-mainwith2x 6.0 sqmm FRLSHPVC insulated copper conductor single core cable in best quality recessed alkathine pipeand earthing the point with1x 6.0 sqmmFRLSH PVC insulated copper conductor single core cable as required.
599Supplying & fixing Conduit inspection bend 1/2\",3/4\"1\"
600Supplying & fixing Conduit inspection Tee 1/2\",3/4\" & 1\"
601Supplying & fixing Conduit inspection round 1/2\",3/4\" & 1\"
602Supplying & fixing M.S. Box as junction purpose 100mm x 150mm
603Supplying & fixing M.S. Box as junction purpose 200mm x 150mm
604Supplying & fixing Bakelite sheet 125mm x 175mm
605Supplying & fixing Bakelite sheet 225mm x 175mm
606SWITCH,SOCKET AND ACCESSORIES
607Supplying & fixing 06 amps 1 way FT switch on white modular plate and metal flux box including connection etc. as required.
6081 no. 06 amps FT switch with 1 no white 1 modular plate and 1 modular metal flux box.
6092 no. 06 amps FT switch with 1 no white 2 modular plate and 2 modular metal flux box.
6103 no. 06 amps FT switch with 1 no white 3 modular plate and 3 modular metal flux box.
6114 no. 06 amps FT switch with 1 no white 4 modular plate and 4 modular metal flux box.
6126 no. 06 amps FT switch with 1 no white 6 modular plate and 6 modular metal flux box.
6138 no. 06 amps FT switch with 1 no white 8 modular plate and 8 modular metal flux box.
614Supplying & Fixing 1 no fan regulator 120W,in 1NO 2module white cover as required.
615Supplying & fixing 1 no. 16 amps socket, & 16 amps switch,white plate (4 module) & Metal flux box (4 module)includingconnection etc. as required.
616Supplying & fixing 1 no. 06 amps socket with 1no. 06 amps switch, 1 no. 3 module white plate & 1 no. 3 module metal flux box ) including connection etc. as required.
617Supplying & fixing 1 no. 2 way switch with 1 no 1module white plate & 1 no 1 module metal flux box including connection etc. as required.
618LIGHT FITTINGS ,FAN&ACCESSORIES
619Supplying & fixing LEDtube light fitting 22 watts 4 ftincluding connection etc. as required.
620Supplying & fixing recessedLED fitting 10 wattsincluding connection etc. as required.
621Supplying & fixing LEDbulk head fitting including connection etc. as required.
622Supplying & Fixing 48\"\"Ceiling fan Bajaj/Khaitan Or Eqivalent make complete with all accessories including connection as required.
623Supplying & fixing wall lamp fitting (Decorative) with LED lamp including connection etc. as required.
624Supplying & fixing LED wall mounting mirror light including connection etc. as required.
625Supplying, Installation, testing & commissioning of ventilating fan 250mmincluding connection as required.
626DISTRIBUTION SYSTEM & EARTHING
627Supplying, installation, testing & commissioning of Copper Bus-bar chamber 4 pole 100 Amps
628Supplying, installation, testing & commissioning ofMiniature circuit breaker (CONFORMING TO CPWD /NBC/ Relevant IS & BIS Code)
629Four pole 63Amps
630Single pole 40 Amps
631Single pole 6 - 32 Amps
632Supplying, installation, testing & commissioning of Isolator(CONFORMING TO CPWD /NBC/ Relevant IS & BIS Code)Four pole 063 Amps
633Supplying & installation of MCB distribution board Double Door/Single door(CONFORMING TO CPWD /NBC/ Relevant IS & BIS Code)
63412 ways SPN (Single door)
63512 ways SPN(Double door)
6364 ways(TP & N)(Double-door)
637Providing, laying, testing & commissioning of 1.1 KV grade PVC insulated aluminium armoured conductor cable on surface of the wall of building with required size of aluminium shadle and screw etc. as required (10 mtrs)3.5 core 50 sqmm
6383KVA /72V,1 Phase ONLINE UPS CONFORMING TO IEC 62040-1-1,IEC60950
63912 Volt,150AH battery
640Cabinet for battery
641Providing & earthing with 2 mtr. Long safe earthingwith T19 electrode & 1 bag back fill chemical compound
642Provoding & laying of G.I. strips 25mm X 5mm looping earth from earth electrode to main distribution system of the building
643Providiong & laying 6/8 SWG Copper wire from main dist. Pannel to distribution system of the building.
644Providing & installing Copper tube type 1m long lightning arrestor having prongsat the top of the arrestor and base plate with nuts & bolts
645Supplying,installation , testing & commissioning of ON/OFFLOADChangeover Switch(CONFORMING TO CPWD /NBC/ Relevant IS & BIS Code): Fourpole 100 amps / 415 V
646STREET LIGHTING
6478.5 Mtrs. Long 410-SP-18 swaged type steel tubular pole with CI base plate & cap, double part ( Nuts & bolts type) working load 120 Kgs
648LED Street light 45 Watt
649G.I.street light bracket
650Landscape light fitting CONE NXG-IP65.CONENXGBLS8WLED 830PSYMTOPC
6514 Core x 6 sqmm LT armoured cable
6522 Core x 16 sqmm LT armoured cable
6531.5 sqmm ISI marked HRFRLS single core copper conductor cable (Havells)
654Polycarbonate junction box with bus bar arrangement & 6 Amp MCB
655G.I Earth Spikeconforming to IS 227.
656G.I. wire 6/8 SWG for earth
657Red oxide paint
658Aluminium paint
659PVC tape
660Concreting of 8.5 Mtrs. Lattice Structure / Swaged Steel Tubular Pole in 1:4:8 cc in 0.9x0.9x1.50 mtrs Pit, Construction of parapet 0.35 x 0.47x0.153 mtrs. In 1:3:6 cc i/c 12mm cement plaster of parapet in 1:4 Mix.
661Excavation of 0.45x0.90x1.00mtrs. Cable trench in mix soil & re-filling with available excavated earth & providing cement concrete on the top of the trench.
662CCTV WITH SURVEILLANCE SYSTEM.
663VR 24 Channel
664Poe Switch 24+1 Channel
665CCTV CAMERAS (FULL HD)
666Dome Camera IP 4mp 40 mtr
667Bullet Camera IP 4mp 40mtr
668Display 27\"
6699U Rack
670RJ 45 Connector
671Square Box
672Cable Clip
6734 Tb HDD
674Cat 6 Cable
675Sundries
676AC (AIR CONDITIONING) SYSTEM
677Model:FCQ 18 (1.5 TR Cassette AC)
678Model:FCQ 30 (2.5 TR Cassette AC)
679Copper pipe with insulation
680Electric Cable
681PVC Drain Pipe with insulatio
682ODU Bracket
683Sundries
684PROVISION FOR LIFT

AI Tender Summary

OUR REF NO 43658064
AUTHORITY Government Departments
TENDER VALUE 8.34 Crore
LAST DATE 11-07-2024
Authority
Authority Name Building and Housing Department
Work Description Construction Of Court Of Civil Judge Cum Judicial Magistrate Bungalow. Construction Of Court Of Civil Judge Cum Judicial Magistrate Bungalow At Karfectar, Jorethang, Namchi District, Sikkim.
Basic Detail
Tender No 10(91)LPAD/2023/P/6
Bidding Type Tender
Location
City jorethang
State Sikkim
Key Dates
Publish Date 12 Jun 2024
Submission Date 11 Jul 2024
Open Date 15 Jul 2024
Finance
Tender Value 8.34 Crore
Tender Fee 1 Lakhs
EMD 20.85 Lakhs
Exemption Not Available
Document List
bf491b32-68b5-4a17-921c-f8466203460b.html
BOQ_811.xls
SBD-Karfectar.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jun 12, 2024
11:30 IST

Tender Published

Tender notice published.

Completed
Jul 11, 2024
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Jul 15, 2024

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

bf491b32-68b5-4a17-921c-f8466203460b.html

xls

BOQ_811.xls

pdf

SBD-Karfectar.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders