Tender For Maintenance Of Internal Electrical Work For Community Center Sector- Beta-1, And Beta-2, And Providing Street Light In Malakpur Samshan Ghat, Greater Noida., 1 Boq 2 Wiring Point For Light In 1.5 Sq. Mm.Frlsh Pvc Insulated Multistrand Singl, noida-Uttar Pradesh

Tender For Maintenance Of Internal Electrical Work For Community Center Sector- Beta-1, And Beta-2, And Providing Street Light In Malakpur Samshan Ghat, Greater Noida., 1 BOQ 2 Wiring point for light in 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable (drawn through existing concealed PVC conduit) and 5 Amp.flush type switch & ceiling rose/angle/batten holder fixed with 3mm thick phenolic laminated backalite sheet with brass machine screws and cup washers mounted over existing M.S. switch board box/ junction box with supply of all material, labour & T&P etc. required for proper completion of the work as directed at site by the Engineer in charge. (UPPWD-2018/174) 3 Wiring point for ceiling fan in 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable (drawn through existing concealed PVC conduit) and 5 Amp.flush type switch & ceiling rose/angle/batten holder fixed with 3mm thick phenolic laminated backalite sheet with brass machine screws and cup washers mounted over existing M.S. switch board box/ junction box with supply of all material, labour & T&P etc. required for proper completion of the work as directed at site by the Engineer in charge. (UPPWD-2018/174 B) 4 Supply and fixing of power plug with 15A/250 volt flush type switch and 5 pin 15A/250V flush type modular socket in suitable M.S. box of 175mm x 100mm x 50mm size with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer.item no.1139+187C 5 Supply and Wiring of submains with 2 nos. 2.5 sq. mm. FRLSH PVC insulated multistrand copper conductor cable. in existing conduit complete with supply of all material labour and T&P required for proper completion of the work as directed at site by Engineer in charge. item no.289 P 6 Same as in itme no. 289 but with 3 nos. 4 sq. mm. FRLSH PVC insulated multistrand copper conductor cable.item no.289 B 7 S&F surface/flush mounting 4ways SPN distribution board with additional metal door without MCB complete in all respect, as directed by Engineer in charge. CAT-B item no.1022B 8 S & F surface/Flush mounting 8ways TPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer in charge.CAT- B item no.1028A 9 S&F of 63 Amp. 4 Pole Isolator CAT- B item.no.1007 B 10 S&F single pole MCB blanking plate cat. B item no 1034 B 11 S&F of 6 Amp to 32 Amp. SP MCB (10 KA) C Curve CAT-B item no.1002 12 Supply of 1200mm sweep ceiling fan complete with double ball bearings, bladers, down rod, shackle insulator, canopy etc. complete as required. item no 1501Model- BBE 4 Star Rating 1200 mm Sweep 13 Supply, Installation, testing and commissioning of 300mm dia exhaust fan complete in all required (AR) FTS-131561 14 Supply and fixing of electronic fan regulator( Modular) 120-280 V. ISI marked, on the existing switch board including making connections, required material, labour T&P etc. for proper completion of work to the atisfaction of Engineer in charge of work. (Item no. 1203c) 15 Supply and fixing of LED Tube Light with batten suitable for up to 1 X 22 watt LED tube light fitting including tube on Surface complete in all respect.CAT- AA Item no.1413 16 Supply & fixing of 8mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 135 mm and base plate 12mm thik) having 3mm thikness with single arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect. (UPPWD-643) 17 Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 52 watt to 72 Watt. Confirming to IP66 Protection complete in all respect. CAT-AA (UPPWD-1422) 18 Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. as per up pwd schedule 2018 item no 501 19 4CX16sqmm 20 Supply and fixing of plain or pin type copper tin plated cable socket( Lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. Up pwd schedule 2018 item no 504 21 4CX16 Sqmm 22 Supply and fixing of recess/ Surface/ Pendent mounting round 10 to 15 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect. CAT- AA (UPPWD-2018/1402) 23 Supplying and fixing following piano type switch on the existing switch box/ cover including connections etc. as required. 5/6 amps switch (DSR-1.23) 24 Supplying and fixing following piano type socket on the existing switch box/ cover including connections etc. as required. 5/6 amps switch (DSR-1.23) 25 Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. (UPPWD-2018/807) 26 40Amp. TPN 27 Supply and burying of 40mm dia x 4.5 metres long G.I. Pipe vertically for earthing having 12mm dia. Holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No. 6 to 8SWG GI wire in G.I. Pipe up to appron (and from appron to switch board the cost of G.I. wire and pipe will be extra) upto switch board, 30cm square C.I. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing.(UPPWD- 701) 28 Supply and laying of 25mm x 3mm G.I. strip from earth electrode directly in the ground as required complete in all respect. (UPPWD-2018/716) 29 S/F of M.S. Rod earthing with 2.5m long solid 20mm dia hot dipped gaivanished M.S. road buried till the top reaches 1.7mtr.. Below the GL complete with bolts & nuts and G.I. earth wire 7/14 (ERP-2023/967) 30 S/L of 90mm dia DWC pipe for drawing of power cable across the road by drilling of 120mm dia at 1mtr. Below the road level thereby doing the work of providing DWC pipe by manual Trenchless method. (ERP-2023/967) 31 Labour Cess will be paid extra as per applicable 32 GST will be paid extra as per applicable

INR 840 /-

INR 45000.0 /-

INR 22.15 Lakhs /-