Science and Technology Government Departments Closing in 0 days TDR #43643318

Tender For Supply, Installation, Testing, Commissioning And Warranty Of Electronic Private Automatic Branch Exchange (Epabx) And Comprehensive Annual Maintenance Contract (Camc)

Issued by Government Departments · Mumbai Suburban, Maharashtra
Tender Value
Ref. Documents
Estimated cost
Bid Submission
25 Jul 2024
0 days left
EMD
4.26 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai Suburban → Maharashtra
EMD Exemption
Available
Quantity
Not Available

Project Description

Supply, Installation, Testing, Commissioning And Warranty Of Electronic Private Automatic Branch Exchange (Epabx) And Comprehensive Annual Maintenance Contract (Camc) , Supply, Installation, Testing, Commissioning & Warranty Of Digital Switching System (Pbx) Having Expandable Capacity Of 4000 Ports With Platform For Mounting Of Pbx System, With Fully Duplicated Common Control (Or Distributed Common Control), Including Shelf Controllers And Power Supply Units, With Configurationas Per Specifications, Standards, Scope Of Work And Instructions Of Engineer-In-Charge. Note: Please Refer File Specification.Pdfclause 6.1 , Nms With Full Gui Management Software With Configuration Management, Facility For Customer Data Back Up On Nms, And Fault Management.(Necessary Hardware With Required Operating System Including A Pc As Specified Should Be Supplied Without Any Extra Cost.) , Centralized Call Accounting System With Full Accounting Software For External And Internal Call Logging.(Necessary Hardware With Required Operating System Including A Pc And Printer As Specified Should Be Supplied Without Any Extra Cost.) , Supply, Installation, Testing And Commissioning Of Operator Consoles With Roset Boxes. , Analog Telephone Instrument With Caller Id Facility(Make And Model With The Approval Of Eic) With One Year Onsite Warrantee. Caller Id Should Support Line Power. , Supply, Installation, Testing And Commissioning Of Digital Phones With Roset Boxes And One Additional Original Coil Cord By Oem Of The Instrument. , Supply, Installation, Testing And Commissioning Of Sip Phones With One Additional Original Coil Cord By Oem Of The Instrument. , Supply, Installation, Testing And Commissioning Of N+2 Redundant Modular Float Cum Boost Charger (Fcbc) With Suitable Rating Of Isolation Transformer, Maintenance Free Lead-Acid Batteries (Vrla) For Pbx Wired Capacity Load For 8 Hrs Back-Up, With Platforms For Mounting Of Fcbc Cabinets & Batteries And 1 No. Spare Power Supply Module Of Fcbc. Note:Scope Includes Power Wiring From The Existing Electrical Distribution Systems To Fcbc, Batteries, Earth Systems Etc. With Suitable Electrical Wires And Accessories, Removal And Shifting Of Existing Fcbc, Batteries, Cables/ Wires And Accessories Etc. To Designated Place In The Premises. , Supply, Installation, Testing And Commissioning Of Following Main Distribution Frame (Mdf) With Top And Bottom Cable Entry, Accessories Including Gi Cable Tray With Ceiling/ Floor Support And Pvc Trunking Of Appropriate Size For Cable Routing Between Pbx And System Mdf, Field Mdf/Ttb And System Mdf, End Termination Of Cables Including Jumper Wires, Cable Glanding, Labeling, Feruls, Charts, Documentation Of Existing Cables Pairs, Punching, Removal From Existing Connctors Wherever Required And Re-Punching Of Cables From The System Side And Field Side, Cable Dressing In Mdf/Ttb, Providing Cable Dressing Accessories As Required Removal And Shifting Of Existing Mdf And Accessories To Designated Place In The Premises As Required Etc Complete In All Respect All As Per Specifications, Site Conditions And Instructions Of Engineer In Charge. , System Mdfmounting Frame Boxmade Out Of 14 Swg/2Mm Ms Crca Sheet Duly Powder Coated With Front Hinged Door (S), Gasket,Cam Lock With Master Key And Jumper Rings/Cable Managers, Gland Plates On Top And Bottom, Chart Holder/Pocket To Be Provided As Directed,With A Capacity Of Mountingminimum 2600 Pair Krone Module (Equipped With Lsa-Plus Type Connector Modules, Silver-Plated Contacts), 2/10, 11 Wayss Back Mount Frame Ct Block, Dust Cover, Label Holder, Floor/Wall Mounted With Platform/Required Mountingaccessories Etc. Complete As Per Site Conditions. , 2/10, 11 Wayss Back Mount Frame Ct Block Loaded With 10 Nos. Of Krone Modules-Lsa-Plus Type Connector Modules (10X10=100 Pairs), Silver-Plated Contacts , Dust Covers, Label Holders, Mounting Accessories Etc. Complete As Per Site Conditions. , Replacement Of Existing Krone Modules-Lsa-Plus Type Connector Modules, Silver-Plated Contacts Of 10 Pairs Each On Existing Ss Ct Boxes, Complete As Per Site Conditions. (Scope Includes Supply And Installation Of One No. Each Label Holder And Dust Cover For Each Set Of 100 Pairs). , Re-Installation Of Existing 2000 Pair Mdf At New Location With All Accessories As Required As Per Site Conditions Including Documentation Of Existing Cables Pairs, Removal Of Existing Cables And Connectors Etc. As Required. Note: If Required, As Per Site Condition, Supply And Installation Of Ss Back Mount Frame Ct Block, Connectors, Dust Cover, Label Holder Etc Shall Be Measured Separately. , Supply Of 20 Pair, 0.5 Mm Dia. Annealed Solid Conductor, Colour Coded & Twisted Pair Polyethylene Insulated, Pvc Sheathed, Fully Jelly Filled, Gi Wire/Strip Armoured Telephone Cable Along With Cable Installation In Existing Hume Pipe / Trench Etc. /Over Surface With 4 Mm Thick Hot Dipped Gi Spacer And 16 Swg Thick Hot Dipped Gi Saddles Fixed At A Distance Of 350 Mm From Each Other With Screws And Pvc Phil Plug Etc. Minimum No. 10 X 35 Mm Gi Wood Screws Etc. All As Per Standards And Instructions Of Eic , Supply Of 50 Pair, 0.5 Mm Dia. Annealed Solid Conductor, Colour Coded & Twisted Pair Polyethylene Insulated, Pvc Sheathed, Fully Jelly Filled, Gi Wire/Strip Armoured Telephone Cable Along With Cable Installation In Existing Hume Pipe / Trench Etc. /Over Surface With 4 Mm Thick Hot Dipped Gi Spacer And 16 Swg Thick Hot Dipped Gi Saddles Fixed At A Distance Of 350 Mm From Each Other With Screws And Pvc Phil Plug Etc. Minimum No. 10 X 35 Mm Gi Wood Screws Etc. All As Per Standards And Instructions Of Eic , Supply Of 100 Pair, 0.5 Mm Dia. Annealed Solid Conductor, Colour Coded & Twisted Pair Polyethylene Insulated, Pvc Sheathed, Fully Jelly Filled, Gi Wire/Strip Armoured Telephone Cable Along With Cable Installation In Existing Hume Pipe / Trench Etc. /Over Surface With 4 Mm Thick Hot Dipped Gi Spacer And 16 Swg Thick Hot Dipped Gi Saddles Fixed At A Distance Of 350 Mm From Each Other With Screws And Pvc Phil Plug Etc. Minimum No. 10 X 35 Mm Gi Wood Screws Etc. All As Per Standards And Instructions Of Eic , Supply And Installation Of Cat 6 Cable With The Approval Of Eic For Interconnection Between System Mdf And Field Mdf, Internal Jumpers Etc. Note: For Jumpers Cat 6 Cable Will Be Used By Removing Sheath. Payment Shall Be Made For Actual Length Of Cat-6 Cable Consumed. , Supply & Installation Of End Joint, Glands For 10/20 Pair Cable Along With All Accessories With The Approval Of Eic. , Supply & Installation Of End Joint, Glands For 50 Pair Cable Along With All Accessories With The Approval Of Eic. , Supply & Installation Of End Joint, Glands For 100 Pair Cable Along With All Accessories With The Approval Of Eic. , Supply & Installation Of Straight Joint With Jointing Kit For 10/20 Pair Cable Along With All Accessories With The Approval Of Eic. , Supply & Installation Of Straight Joint With Jointing Kit For 50 Pair Cable Along With All Accessories With The Approval Of Eic. , Supply & Installation Of Straight Joint With Jointing Kit For 100 Pair Cable Along With All Accessories With The Approval Of Eic. , Re-Routing And Re-Installation Of Existing 10/20/50/100 Pair Telephone Cables In Existing Trench/On Wall/ Column Etc Including Removal From Existing Mdf/Ttb In Existing Trench/On Wall/ Column Etc. , Punching/Insertion Tools (Krone) , Pegs (Krone) , Connection Cord 2/2 2 Pole With Plugs , Disconnection Plug 10 Pair , Test Cord 2/2, 2 Pole With 2 Banana Plugs , Protection Plug Set Of 10 With Earth Bar , Digital Temperature & Humidity Indicator , Digital Multimeter , Multipurpose Tools Kit Including Tools Like Cutter, Nose Pliers, Wire Stripper, Allen Keys (Hex) Set, Screw Driver Set (Various Sizes And Types), D-Spanner Set, Box Spanner Set With Rachet Handle, Slide Wrench Set, Filing Tool, Cleaning Liquid, Brushes Etc. , Comprehensive Amc Cost For 1St Year (After Warranty Period Of One Year From The Date Of Successful Commissioning) Of Epabx System Including Deployment Of 2 Trained Technicians/Site Engineers On Regular Basis On All Working Days For Day To Day Handling Of Maintenance Of Epabx System, Cabling, Configurations, System Management, Back-Up, Co-Ordination With Other Units For Cabling, Rectification Of Fault In Telephone Extension Line Etc. All As Per Instructions Of Engineer-In-Charge. On Emergency Or Special Requirement, Manpower Deployment Shall Be On Weekly Offs And Holidays Also. , Comprehensive Amc Cost For 2Nd Year Of Epabx System Including Deployment Of 2 Trained Technicians/Site Engineers On Regularbasis On All Working Days For Day To Day Handling Of Maintenance Of Epabx System, Cabling, Configurations, System Management, Back-Up, Co-Ordination With Other Units For Cabling, Rectification Of Fault In Telephone Extension Line Etc. All As Per Instructions Of Engineer-In-Charge. On Emergency Or Special Requirement, Manpower Deployment Shall Be On Weekly Offs And Holidays Also. , Comprehensive Amc Cost For 3Rd Year Of Epabx System Including Deployment Of 2 Trained Technicians/Site Engineers On Regularbasis On All Working Days For Day To Day Handling Of Maintenance Of Epabx System, Cabling, Configurations, System Management, Back-Up, Co-Ordination With Other Units For Cabling, Rectification Of Fault In Telephone Extension Line Etc. All As Per Instructions Of Engineer-In-Charge. On Emergency Or Special Requirement, Manpower Deployment Shall Be On Weekly Offs And Holidays Also.

BOQ

Item Details: Supply, installation, testing, commissioning and warranty of Electronic Private Automatic Branch Exchange (EPABX) and Comprehensive Annual Maintenance Contract (CAMC)
Sl. No. Item Description
1Supply, Installation, testing, commissioning & warranty of Digital Switching System (PBX) having expandable capacity of 4000 ports with platform for mounting of PBX System, with fully duplicated common control (or distributed common control), including shelf controllers and power supply units, with configurationas per specifications, standards, scope of work and instructions of Engineer-in-charge.Note: Please refer file SPECIFICATION.pdfclause 6.1
2NMS with full GUI management software with Configuration management, facility for customer data back up on NMS, and fault management.(Necessary hardware with required operating system including a PC as specified should be supplied without any extra cost.)
3Centralized call accounting system with full accounting software for external and Internal call logging.(Necessary hardware with required operating system including a PC and Printer as specified should be supplied without any extra cost.)
4Supply, installation, testing and commissioning of operator consoles with roset boxes.
5Analog telephone instrument with caller ID facility(make and model with the approval of EIC) with one year onsite warrantee. Caller ID should support line power.
6Supply, installation, testing and commissioning of digital phones with roset boxes and one additional original coil cord by OEM of the instrument.
7Supply, installation, testing and commissioning of SIP phones with one additional original coil cord by OEM of the instrument.
8Supply, installation, testing and commissioning of N+2 redundant modular float cum boost charger (FCBC) with suitable rating of Isolation transformer, maintenance free Lead-Acid Batteries (VRLA) for PBX wired capacity load for 8 hrs back-up, with platforms for mounting of FCBC cabinets & batteries and 1 no. spare power supply module of FCBC.Note:Scope includes power wiring from the existing electrical distribution systems to FCBC, batteries, earth systems etc. with suitable electrical wires and accessories, removal and shifting of existing FCBC, batteries, cables/ wires and accessories etc. to designated place in the premises.
9Supply, Installation, testing and commissioning of following Main Distribution Frame (MDF) with top and bottom cable entry, accessories including GI cable tray with ceiling/ floor support and PVC trunking of appropriate size for cable routing between PBX and system MDF, field MDF/TTB and system MDF, end termination of cables including jumper wires, cable glanding, labeling, feruls, charts, documentation of existing cables pairs, punching, removal from existing connctors wherever required and re-punching of cables from the system side and field side, cable dressing in MDF/TTB, providing cable dressing accessories as required removal and shifting of existing MDF and accessories to designated place in the premises as required etc complete in all respect all as per specifications, site conditions and instructions of Engineer in charge.
10System MDFmounting frame boxmade out of 14 SWG/2mm MS CRCA sheet duly powder coated with front hinged door (s), gasket,CAM lock with master key and jumper rings/cable managers, gland plates on top and bottom, chart holder/pocket to be provided as directed,with a capacity of mountingminimum 2600 pair Krone Module (equipped with LSA-PLUS type connector modules, silver-plated contacts), 2/10, 11 waySS back mount frame CT Block, dust cover, label holder, floor/wall mounted with platform/required mountingaccessories etc. complete as per site conditions.
112/10, 11 waySS back mount frame CT Block loaded with 10 nos. of Krone Modules-LSA-PLUS type connector modules (10x10=100 pairs), silver-plated contacts , dust covers, label holders, mounting accessories etc. complete as per site conditions.
12Replacement of existing Krone Modules-LSA-PLUS type connector modules, silver-plated contacts of 10 pairs each on existing SS CT boxes, complete as per site conditions.(scope includes supply and installation of one no. each label holder and dust cover for each set of 100 pairs).
13Re-installation of existing 2000 pair MDF at new location with all accessories as required as per site conditions including documentation of existing cables pairs, removal of existing cables and connectors etc. as required. Note: If required, as per site condition, supply and installation of SS back mount frame CT Block, connectors, dust cover, label holder etc shall be measured separately.
14Supply of 20 pair, 0.5 mm dia. annealed solid conductor, colour coded & twisted pair polyethylene insulated, PVC sheathed, fully jelly filled, GI wire/strip armoured telephone cable along with cable installation in existing hume pipe / trench etc. /over surface with 4 mm thick hot dipped GI spacer and 16 SWG thick hot dipped GI saddles fixed at a distance of 350 mm from each other with screws and PVC phil plug etc. minimum no. 10 x 35 mm GI wood screws etc. all as per standards and instructions of EIC
15Supply of 50 pair, 0.5 mm dia. annealed solid conductor, colour coded & twisted pair polyethylene insulated, PVC sheathed, fully jelly filled, GI wire/strip armoured telephone cable along with cable installation in existing hume pipe / trench etc. /over surface with 4 mm thick hot dipped GI spacer and 16 SWG thick hot dipped GI saddles fixed at a distance of 350 mm from each other with screws and PVC phil plug etc. minimum no. 10 x 35 mm GI wood screws etc. all as per standards and instructions of EIC
16Supply of 100 pair, 0.5 mm dia. annealed solid conductor, colour coded & twisted pair polyethylene insulated, PVC sheathed, fully jelly filled, GI wire/strip armoured telephone cable along with cable installation in existing hume pipe / trench etc. /over surface with 4 mm thick hot dipped GI spacer and 16 SWG thick hot dipped GI saddles fixed at a distance of 350 mm from each other with screws and PVC phil plug etc. minimum no. 10 x 35 mm GI wood screws etc. all as per standards and instructions of EIC
17Supply and installation of CAT 6 cable with the approval of EIC for interconnection between System MDF and field MDF, internal jumpers etc.Note: For jumpers CAT 6 cable will be used by removing sheath. Payment shall be made for actual length of CAT-6 cable consumed.
18Supply & Installation of End joint, glands for 10/20 pair cable along with all accessories with the approval of EIC.
19Supply & Installation of End joint, glands for 50 pair cable along with all accessories with the approval of EIC.
20Supply & Installation of End joint, glands for 100 pair cable along with all accessories with the approval of EIC.
21Supply & Installation of straight joint with jointing kit for 10/20 pair cable along with all accessories with the approval of EIC.
22Supply & Installation of straight joint with jointing kit for 50 pair cable along with all accessories with the approval of EIC.
23Supply & Installation of straight joint with jointing kit for 100 pair cable along with all accessories with the approval of EIC.
24Re-routing and re-installation of existing 10/20/50/100 pair telephone cables in existing trench/on wall/ column etc including removal from existing MDF/TTB in existing trench/on wall/ column etc.
25Punching/insertion tools (Krone)
26Pegs (Krone)
27Connection Cord 2/2 2 pole with Plugs
28Disconnection Plug 10 pair
29Test Cord 2/2, 2 pole with 2 banana Plugs
30Protection plug set of 10 with Earth bar
31Digital Temperature & humidity indicator
32Digital Multimeter
33Multipurpose tools kit including tools like cutter, nose pliers, wire stripper, allen keys (hex) set, screw driver set (various sizes and types), D-spanner set, box spanner set with rachet handle, slide wrench set, filing tool, cleaning liquid, brushes etc.
34Comprehensive AMC cost for 1st Year (After warranty period of one year from the date of successful commissioning) of EPABX System including deployment of 2 trained technicians/site engineers on regular basis on all working days for day to day handling of maintenance of EPABX System, cabling, configurations, system management, back-up, co-ordination with other units for cabling, rectification of fault in telephone extension line etc. all as per instructions of Engineer-In-Charge. On emergency or special requirement, manpower deployment shall be on weekly offs and holidays also.
35Comprehensive AMC cost for 2nd Year of EPABX System including deployment of 2 trained technicians/site engineers on regularbasis on all working days for day to day handling of maintenance of EPABX System, cabling, configurations, system management, back-up, co-ordination with other units for cabling, rectification of fault in telephone extension line etc. all as per instructions of Engineer-In-Charge. On emergency or special requirement, manpower deployment shall be on weekly offs and holidays also.
36Comprehensive AMC cost for 3rd Year of EPABX System including deployment of 2 trained technicians/site engineers on regularbasis on all working days for day to day handling of maintenance of EPABX System, cabling, configurations, system management, back-up, co-ordination with other units for cabling, rectification of fault in telephone extension line etc. all as per instructions of Engineer-In-Charge. On emergency or special requirement, manpower deployment shall be on weekly offs and holidays also.

AI Tender Summary

OUR REF NO 43643318
AUTHORITY Government Departments
TENDER VALUE Ref. Documents
LAST DATE 25-07-2024
Authority
Authority Name Directorate Of Purchase And Stores
Work Description Supply, Installation, Testing, Commissioning And Warranty Of Electronic Private Automatic Branch Exchange (Epabx) And Comprehensive Annual Maintenance Contract (Camc) , Supply, Installation, Testing, Commissioning & Warranty Of Digital Switching System (Pbx) Having Expandable Capacity Of 4000 Ports With Platform For Mounting Of Pbx System, With Fully Duplicated Common Control (Or Distributed Common Control), Including Shelf Controllers And Power Supply Units, With Configurationas Per Specifications, Standards, Scope Of Work And Instructions Of Engineer-In-Charge. Note: Please Refer File Specification.Pdfclause 6.1 , Nms With Full Gui Management Software With Configuration Management, Facility For Customer Data Back Up On Nms, And Fault Management.(Necessary Hardware With Required Operating System Including A Pc As Specified Should Be Supplied Without Any Extra Cost.) , Centralized Call Accounting System With Full Accounting Software For External And Internal Call Logging.(Necessary Hardware With Required Operating System Including A Pc And Printer As Specified Should Be Supplied Without Any Extra Cost.) , Supply, Installation, Testing And Commissioning Of Operator Consoles With Roset Boxes. , Analog Telephone Instrument With Caller Id Facility(Make And Model With The Approval Of Eic) With One Year Onsite Warrantee. Caller Id Should Support Line Power. , Supply, Installation, Testing And Commissioning Of Digital Phones With Roset Boxes And One Additional Original Coil Cord By Oem Of The Instrument. , Supply, Installation, Testing And Commissioning Of Sip Phones With One Additional Original Coil Cord By Oem Of The Instrument. , Supply, Installation, Testing And Commissioning Of N+2 Redundant Modular Float Cum Boost Charger (Fcbc) With Suitable Rating Of Isolation Transformer, Maintenance Free Lead-Acid Batteries (Vrla) For Pbx Wired Capacity Load For 8 Hrs Back-Up, With Platforms For Mounting Of Fcbc Cabinets & Batteries And 1 No. Spare Power Supply Module Of Fcbc. Note:Scope Includes Power Wiring From The Existing Electrical Distribution Systems To Fcbc, Batteries, Earth Systems Etc. With Suitable Electrical Wires And Accessories, Removal And Shifting Of Existing Fcbc, Batteries, Cables/ Wires And Accessories Etc. To Designated Place In The Premises. , Supply, Installation, Testing And Commissioning Of Following Main Distribution Frame (Mdf) With Top And Bottom Cable Entry, Accessories Including Gi Cable Tray With Ceiling/ Floor Support And Pvc Trunking Of Appropriate Size For Cable Routing Between Pbx And System Mdf, Field Mdf/Ttb And System Mdf, End Termination Of Cables Including Jumper Wires, Cable Glanding, Labeling, Feruls, Charts, Documentation Of Existing Cables Pairs, Punching, Removal From Existing Connctors Wherever Required And Re-Punching Of Cables From The System Side And Field Side, Cable Dressing In Mdf/Ttb, Providing Cable Dressing Accessories As Required Removal And Shifting Of Existing Mdf And Accessories To Designated Place In The Premises As Required Etc Complete In All Respect All As Per Specifications, Site Conditions And Instructions Of Engineer In Charge. , System Mdfmounting Frame Boxmade Out Of 14 Swg/2Mm Ms Crca Sheet Duly Powder Coated With Front Hinged Door (S), Gasket,Cam Lock With Master Key And Jumper Rings/Cable Managers, Gland Plates On Top And Bottom, Chart Holder/Pocket To Be Provided As Directed,With A Capacity Of Mountingminimum 2600 Pair Krone Module (Equipped With Lsa-Plus Type Connector Modules, Silver-Plated Contacts), 2/10, 11 Wayss Back Mount Frame Ct Block, Dust Cover, Label Holder, Floor/Wall Mounted With Platform/Required Mountingaccessories Etc. Complete As Per Site Conditions. , 2/10, 11 Wayss Back Mount Frame Ct Block Loaded With 10 Nos. Of Krone Modules-Lsa-Plus Type Connector Modules (10X10=100 Pairs), Silver-Plated Contacts , Dust Covers, Label Holders, Mounting Accessories Etc. Complete As Per Site Conditions. , Replacement Of Existing Krone Modules-Lsa-Plus Type Connector Modules, Silver-Plated Contacts Of 10 Pairs Each On Existing Ss Ct Boxes, Complete As Per Site Conditions. (Scope Includes Supply And Installation Of One No. Each Label Holder And Dust Cover For Each Set Of 100 Pairs). , Re-Installation Of Existing 2000 Pair Mdf At New Location With All Accessories As Required As Per Site Conditions Including Documentation Of Existing Cables Pairs, Removal Of Existing Cables And Connectors Etc. As Required. Note: If Required, As Per Site Condition, Supply And Installation Of Ss Back Mount Frame Ct Block, Connectors, Dust Cover, Label Holder Etc Shall Be Measured Separately. , Supply Of 20 Pair, 0.5 Mm Dia. Annealed Solid Conductor, Colour Coded & Twisted Pair Polyethylene Insulated, Pvc Sheathed, Fully Jelly Filled, Gi Wire/Strip Armoured Telephone Cable Along With Cable Installation In Existing Hume Pipe / Trench Etc. /Over Surface With 4 Mm Thick Hot Dipped Gi Spacer And 16 Swg Thick Hot Dipped Gi Saddles Fixed At A Distance Of 350 Mm From Each Other With Screws And Pvc Phil Plug Etc. Minimum No. 10 X 35 Mm Gi Wood Screws Etc. All As Per Standards And Instructions Of Eic , Supply Of 50 Pair, 0.5 Mm Dia. Annealed Solid Conductor, Colour Coded & Twisted Pair Polyethylene Insulated, Pvc Sheathed, Fully Jelly Filled, Gi Wire/Strip Armoured Telephone Cable Along With Cable Installation In Existing Hume Pipe / Trench Etc. /Over Surface With 4 Mm Thick Hot Dipped Gi Spacer And 16 Swg Thick Hot Dipped Gi Saddles Fixed At A Distance Of 350 Mm From Each Other With Screws And Pvc Phil Plug Etc. Minimum No. 10 X 35 Mm Gi Wood Screws Etc. All As Per Standards And Instructions Of Eic , Supply Of 100 Pair, 0.5 Mm Dia. Annealed Solid Conductor, Colour Coded & Twisted Pair Polyethylene Insulated, Pvc Sheathed, Fully Jelly Filled, Gi Wire/Strip Armoured Telephone Cable Along With Cable Installation In Existing Hume Pipe / Trench Etc. /Over Surface With 4 Mm Thick Hot Dipped Gi Spacer And 16 Swg Thick Hot Dipped Gi Saddles Fixed At A Distance Of 350 Mm From Each Other With Screws And Pvc Phil Plug Etc. Minimum No. 10 X 35 Mm Gi Wood Screws Etc. All As Per Standards And Instructions Of Eic , Supply And Installation Of Cat 6 Cable With The Approval Of Eic For Interconnection Between System Mdf And Field Mdf, Internal Jumpers Etc. Note: For Jumpers Cat 6 Cable Will Be Used By Removing Sheath. Payment Shall Be Made For Actual Length Of Cat-6 Cable Consumed. , Supply & Installation Of End Joint, Glands For 10/20 Pair Cable Along With All Accessories With The Approval Of Eic. , Supply & Installation Of End Joint, Glands For 50 Pair Cable Along With All Accessories With The Approval Of Eic. , Supply & Installation Of End Joint, Glands For 100 Pair Cable Along With All Accessories With The Approval Of Eic. , Supply & Installation Of Straight Joint With Jointing Kit For 10/20 Pair Cable Along With All Accessories With The Approval Of Eic. , Supply & Installation Of Straight Joint With Jointing Kit For 50 Pair Cable Along With All Accessories With The Approval Of Eic. , Supply & Installation Of Straight Joint With Jointing Kit For 100 Pair Cable Along With All Accessories With The Approval Of Eic. , Re-Routing And Re-Installation Of Existing 10/20/50/100 Pair Telephone Cables In Existing Trench/On Wall/ Column Etc Including Removal From Existing Mdf/Ttb In Existing Trench/On Wall/ Column Etc. , Punching/Insertion Tools (Krone) , Pegs (Krone) , Connection Cord 2/2 2 Pole With Plugs , Disconnection Plug 10 Pair , Test Cord 2/2, 2 Pole With 2 Banana Plugs , Protection Plug Set Of 10 With Earth Bar , Digital Temperature & Humidity Indicator , Digital Multimeter , Multipurpose Tools Kit Including Tools Like Cutter, Nose Pliers, Wire Stripper, Allen Keys (Hex) Set, Screw Driver Set (Various Sizes And Types), D-Spanner Set, Box Spanner Set With Rachet Handle, Slide Wrench Set, Filing Tool, Cleaning Liquid, Brushes Etc. , Comprehensive Amc Cost For 1St Year (After Warranty Period Of One Year From The Date Of Successful Commissioning) Of Epabx System Including Deployment Of 2 Trained Technicians/Site Engineers On Regular Basis On All Working Days For Day To Day Handling Of Maintenance Of Epabx System, Cabling, Configurations, System Management, Back-Up, Co-Ordination With Other Units For Cabling, Rectification Of Fault In Telephone Extension Line Etc. All As Per Instructions Of Engineer-In-Charge. On Emergency Or Special Requirement, Manpower Deployment Shall Be On Weekly Offs And Holidays Also. , Comprehensive Amc Cost For 2Nd Year Of Epabx System Including Deployment Of 2 Trained Technicians/Site Engineers On Regularbasis On All Working Days For Day To Day Handling Of Maintenance Of Epabx System, Cabling, Configurations, System Management, Back-Up, Co-Ordination With Other Units For Cabling, Rectification Of Fault In Telephone Extension Line Etc. All As Per Instructions Of Engineer-In-Charge. On Emergency Or Special Requirement, Manpower Deployment Shall Be On Weekly Offs And Holidays Also. , Comprehensive Amc Cost For 3Rd Year Of Epabx System Including Deployment Of 2 Trained Technicians/Site Engineers On Regularbasis On All Working Days For Day To Day Handling Of Maintenance Of Epabx System, Cabling, Configurations, System Management, Back-Up, Co-Ordination With Other Units For Cabling, Rectification Of Fault In Telephone Extension Line Etc. All As Per Instructions Of Engineer-In-Charge. On Emergency Or Special Requirement, Manpower Deployment Shall Be On Weekly Offs And Holidays Also.
Basic Detail
Tender No DPS/CPU/10/B3/2719/TPT
Bidding Type Tender
Location
City Mumbai Suburban
State Maharashtra
Key Dates
Publish Date 11 Jun 2024
Submission Date 25 Jul 2024
Open Date 26 Jul 2024
Finance
Tender Value Ref. Documents
Tender Fee Ref. Documents
EMD 4.26 Lakhs
Exemption Available
Document List
618729e4-83a0-4fe2-8b30-b13f26a24cda.html
ADDITIONAL_TERMS.pdf
BHARATKOSH.pdf
BOQ_848434.xls
Declaration.rar
NIT_CHECKLIST.pdf
NIT_COMMERCIAL_TERMS.pdf
Note-to-Vendors.pdf
PSD_5.pdf
SITE_VISIT.pdf
Specification.pdf
Tendernotice_1.pdf
TRAINING.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jun 11, 2024
11:30 IST

Tender Published

Tender notice published.

Completed
Jul 25, 2024
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Jul 26, 2024

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

618729e4-83a0-4fe2-8b30-b13f26a24cda.html

pdf

ADDITIONAL_TERMS.pdf

pdf

BHARATKOSH.pdf

xls

BOQ_848434.xls

rar

Declaration.rar

pdf

NIT_CHECKLIST.pdf

pdf

NIT_COMMERCIAL_TERMS.pdf

pdf

Note-to-Vendors.pdf

pdf

PSD_5.pdf

pdf

SITE_VISIT.pdf

pdf

Specification.pdf

pdf

Tendernotice_1.pdf

pdf

TRAINING.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender