|
| 1 | Repair to stone masonary in cement sand mortar 1:6 with old and new stone. |
| 2 | Repair to brick masonary in cement sand mortar 1:6 with new brick. |
| 3 | Random Rubble stone masonary for foundation and plinth in Cement Sand Mortar above 30 Cm. thick wall in : |
| 4 | Cement Mortar 1:6 (1-Cement:6-Sand). |
| 5 | Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead. With cement mortar 1 :4 ( 1 cement : 4 coarse sand) |
| 6 | Dismantling doors, windows and clearstory windows steel or wood shutter including chowkhats and holdfasts etc. complete and stacking within 50 meters lead: |
| 7 | Of area 3 square meter and below. |
| 8 | Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts embedding hold fasts in cement concrete blocks with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)painting two coats of coal tar to sides of chaukhats and making good the damages to walls and floors as required complete including disposal of rubbish to the dumping ground within 50 metres lead. |
| 9 | Door chowkhats |
| 10 | Window chowkhats |
| 11 | Cement plaster 1:3 under old stone slabs with admixtureur,nails,bindingwire to mesh and scraping scales & dressing joints of slabs complete. |
| 12 | Proofing upto 25 mm thickness. |
| 13 | Proofing above 25 mm thickness& upto 60 mm thickness |
| 14 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete |
| 15 | Patch repair to cement concrete floor including digging out old floor in regular shape and removal of rubbish curing etc. complete in all respects. |
| 16 | Removal and refixing stone chhajja 50 to 75 mm thick including finishing, complete in all respects. |
| 17 | Repair of existing steel glazed doors, windows and ventilator, MS sheet door, garge doors, compound wall gates etc. by welding drilling complete include. Cost of welding rods and hire charge of welding meachine and TP etc complete |
| 18 | Repair to damaged RCC slabs, beams and columns etc for strengtheing with cement mortar 1 : 2 in following stepsi) Choping losse and cracked concrete to required depth, cleaning the exposed surface of steel and concrete with wire brush and sand papering , cleaning of concrete surface with water as necessary and getting dried.ii) Applying Epoxy primer on the exposed steel bars.iii) Applying Epoxy hardener and resin mix (as per manufectured\"s specification) on concrete and steel bars with brush.iv)Speading dry cement mortar 1 : 2 mix over epoxy treated wet surface and allow it to dry for one day.v) Plastering the surface with cement sand mortar 1 : 3 upto depth of 30mm complete.vi) Cure the plastered surface for 15 days |
| 19 | Replacement of stone Chajja with sriwan in damaged portion as per existing thickness and width in CM 1 : 3 with removal of old damaged pieces of chajja including top plaster of chajja and bottom pointing in CM 1 : 3 with scoffolding upto three floor level as per direction ofEngineer in charge |
| 20 | Demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of Engineer-in-charge. |
| 21 | Kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) |
| 22 | For area of each slab from 901 to 2000 Sq.Cm : |
| 23 | P & F 1st qualityVitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete. |
| 24 | size 600 mm X 600 mm |
| 25 | Providing and fixing M.S. sheet 1mm thick single leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engg. incharge but excluding cost of chowkhats: including two coats of anitcorrosive red oxide primer paint |
| 26 | Extra for double leaf shutters. |
| 27 | White washing with lime to give an even shade including all scaffolding: |
| 28 | Old work (two or more coats) including scrapping old surface and repairing wherever necessary. |
| 29 | Colour washing of all shades to give an even shade including all scaffolding. |
| 30 | Old work (one or more coats) with whiting with a base coat of white washing including scrapping old surface. |
| 31 | Wallpaintingwithplasticemulsionpaintofapprovedbrand and manufacture to give an even shade including all scaffolding: |
| 32 | Old work (one or more coats) |
| 33 | Painting exterior surface ofWallwith 100% acrylic exterior paintofapprovedbrandandmanufacturetogiveaneven shadewithtwoormorecoatsincludingprepartionofbase with sand papering, primer, putty,etc complete in all respect including scaffolding and safety provision |
| 34 | Old work |
| 35 | Painting with oil type wood preservative of approved brand and manufacture : |
| 36 | Old work (One or more coats). |
| 37 | Supplying and Filling in plinth with blown sand under floors including watering ramming consolidating and dressing complete including cost of sand |
| 38 | Providing and fixing in position collapsible steel shutters with vertical M.S. Channels 20 x 10 x 2mm and bracket with flat iron diagonals 20 x 5mm. size with top and bottom rail of T-iron 40 x 40 x 6mm. with 40mm dia steel pulleys/ball bearing complete with bolts, nuts locking arrangements inside and outside stoppers, handles etc. as per specification including applying a priming coat of approved steel primer. (To be measured and paid as per outer dimension). |
| 39 | Providing and fixing steel gate grating and grills made of angles, tees, square bars or other flats black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide. |
| 40 | Wiring of light point / fan point / exhaust fan point / call bell point with 1.5 sq. mm FR PVC insulated unsheathed 1.1kV grade flexible copper conductor and 1.5 sq.mm FR PVC insulated copper earth conductor (IS:694) of approved make in double lock/ ISI marked single lockpvc casing capping & it\"s accessories, 18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board & false ceiling point, 6 A switch 3.0 mm thick phenolic laminated sheet, zinc plated / brass screws, cup washers , making connections, testing etc. as required. group 2 |
| 41 | (a) Short point (Upto 3m) |
| 42 | (b) Medium point (Upto 6 M) |
| 43 | (C) Long point (Upto 10M) |
| 44 | Wiring of 3 pin 6 amp. Light plug point with 1.5 sq. mm FR PVC insulated unsheathed 1.1 kV grade flexible copper conductor and 1.5 sq.mm FR PVC insulated unsheathed 1.1 kV grade copper earth conductor (IS:694) of approved make double lock/ ISI marked single lock pvc casing capping & it\"s accessories, 18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board & falceceiling point, 6 A switch, 6 A socket, 3.0 mm thick phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections, testing etc. asrequired. group 2 |
| 45 | (a) On board |
| 46 | (b) Short point (Upto 3m) |
| 47 | (c) Medium point (Upto 6 M) |
| 48 | (d) Long point (Upto 10M) |
| 49 | Wiring of twin control light point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it\"s accessories, round tles, Hot Dipped Galvanized M.S Modularbox with earth terminal, screwless cage connectors for neutral looping in switch board& false ceiling point,6 A two way Modular switch, Modular plate with grid plate,screws,making connections, testing etc. as requiredfor group 2 |
| 50 | (a) Medium point (Upto 6 M) |
| 51 | Supplying and drawing FR PVCinsulated & unsheathed flexible copper conductor ISI marked (IS 694) of 1.1 KV grade approved make in existing surface or recessed conduit / casing incliding making connections etc as requiredfor group 2 |
| 52 | (a) 2 x 2.5 Sqmm. |
| 53 | (b) 2 x 4.0 sqmm. |
| 54 | (b) 4 x 6.0 sqmm. |
| 55 | P & F heavy duty capacitor start, 900 / 1400 RPM single phase ISI marked Exhaust fan, IS 2312 marked in existing opening including making connections testing etc. as required300 mm aweep( 900 / 1400 RPM )for group 2 |
| 56 | P & F double ball bearing capacitor start ceiling fan of approved make complete with regulator and other accessories as required. |
| 57 | 1200mm sweep group 1 |
| 58 | P & F of IP40 LED Recessed/ Surface Mounted Round/ sqaure Non Dimmable Downlight with die-cast aluminum housing & Heat sink for heat dissipation, high purity reflector with external driver having efficiency > 85% and in compliance to IEC standards. ( supplied together with luminaire) Power consumption of =< 7w/10w/8w /12w /15w/ 18Wwith 100/500/750/1100/1250 lumens, system lumen, efficeancy of 70 lm / Watt or 100lm / Watt output suitable to replace 1x18W/2x18w /2x26w CFL downlights, life time of 50000 Burning Hours with 70% of intial Lumen maintained. CCT 3000° K, 4000° K and 6000° K. Fixture shall be CE Compliance. Surface Mounting |
| 59 | LED Downlight 6/7 W |
| 60 | LED Downlight 12/14 W |
| 61 | LED Downlight 18/20 W |
| 62 | SITC of quick make and quick break 3 POLE current limiting MCCB having following current rating, short circuit breaking capacity at 440/415 V, 50 Hz; O/L & S/C settings and conforming to IS 13947-2 / IEC 60947-2 with front face and centralised adjustable, line load interchangeability, having positive isolation capability, provision for UVR , shunt trip , earth fault trip, push ( test ) to trip, including making connections with lugs /spreaders etc. as required With Thermal Magnetic release,up to 100 Amp , 10 kA, fixed O/L & S/C setting Group 1 |
| 63 | P/F surface / recessedtype 10 mm thick teak wood board duly antitermite treated varnished and fixed by using gutties / PVC fasteners of following sizes as required. |
| 64 | 150 mm x 75 mm. |
| 65 | 200 mm x 250 mm. |
| 66 | 250 mm x 300 mm. |
| 67 | P. & F Squatting Pan (Indian type) white glazed vitreous china 1st quality W.C. Pan (IS : 2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor (excluding the pair of foot rest.) |
| 68 | Size 450mm. |
| 69 | P & F lst quality WVC Urinal (IS:2556 mark) with 25mm dia G.I. waste pipe, dome waste couplings, concealed iron brackets or screws etc complete. |
| 70 | Flat Back (small) size 456x355x265mm. |
| 71 | P & F WVC wash basin (1st quality, I.S. : 2556 Mark) of approved make with C.I. brackets duly painted,1 No. 15 mm C.P. Pillar cock (IS : 8934 Mark) & 32 mm C.P. brass waste coupling of approved make, P.V.C. waste pipe with PVC nut 32mm complete including cutting and making good the wall: |
| 72 | Size 450 mm x 300 mm |
| 73 | P & F PVC Storage Tank ISI Marked (IS : 12701) indicating theBIS license No),of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: |
| 74 | 750 (-do-) |
| 75 | Providing Laying & jointing glazed S.W. pipes grade `A` (IS;651 marked) of approved make with spun yarn & stiff mixture of cement mortar 1:1, excavation & refilling of earth in all types of soil upto 1.2m depth, S.W. fittings, including testing of joints etc, complete. |
| 76 | 100mm dia |
| 77 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (Internal work Exposed on wall) |
| 78 | 15 mm nominal outer dia pipes |
| 79 | 20mm nominal outer dia pipes |
| 80 | 25 mm nominal outer dia pipes |
| 81 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement , trenching refilling & testing of joints complete as per direction of Engineer in Charge.(External work). |
| 82 | 15 mm nominal outer dia pipes |
| 83 | 20mm nominal outer dia pipes |
| 84 | 32mm nominal outer dia pipes |
| 85 | P & F Pilllar Cocks (IS :8934 Mark) of superior quality and approved make: |
| 86 | C.P. Pillar cock, 15 mm dia nominal bore |
| 87 | P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make: |
| 88 | Brass 400 grm,15mm nominal bore. |
| 89 | (-do-) Long body, 15mm nominal bore weight not less than 810 gm |
| 90 | P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. |
| 91 | C.P. Inlet connection 15mm.Brass (IS : 8931 marked) |
| 92 | P&FFlushCock / FlushValve (IS :9758Mark)forWCofapproved quality make : |
| 93 | CP brass push type 15mm nominal bore. |
