|
| 1 | M&L for 100 mm thick PCC 1:2:4 mix, type B-2 (Using 40 mm graded stone aggregate) as in path / Hard standing etc. finishing surfaces even and smooth without using extra cement, laid in panels, complete all as specified and directed. |
| 2 | M&L for forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30 mm primed and sealed with sealing compound, Grade A, thickness of slab 100 mm complete all as specified and directed. |
| 3 | M&L forming construction joints 30 mm deep and 10 mm wide, filled with sealing compound grade-A complete all as specified and directed. |
| 4 | Demolition of cement concrete (unreinforced) in ground floor and pavings n.exc 15 cm thickness (below or above GL) and removing demolished materials to a distance n.exc 100 mtr complete all as specified and directed. |
| 5 | Demolition of cement concrete (unreinforced) in ground floor and pavings exc. 15 cm thickness (below or above GL) and removing demolished materials to a distance n.exc 100mtr complete all as specified and directed. |
| 6 | M&L 75 mm thick PCC 1:4:8 type D-2, using 40 mm graded stone aggregate, as in sub base of floors etc. complete all as specified and directed. |
| 7 | Chequered cement concrete tiles 250x250x25 mm thick, set, jointed and pointed in neat cement slurry in floors (glossy finish/rubber moulded), laid over and including screed bed 20 mm thick in CM 1:6 complete all as specified and directed. |
| 8 | M&L dry clean sand filling under floors including watering and consolidation complete all as specified and directed.Note:- Depth of sand shall be measured after punning. |
| 9 | M&L machine pressed precast concrete interlocking paver block any shape and size made with grey cement and pigment, confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade complete all as specified and directed. |
| 10 | M&L for PCC 1:2:4 mix type B-1 (Using 20 mm graded stone aggregate) as in kerbs around chequered tiles and paver blocks, slightly rounded or chamfered angles complete all as specified and directed. |
| 11 | Dismantling fencing wire mesh, any type complete all as specified and directed. |
| 12 | Dismantling post, struts, (wood, steel or RCC) any section incl. taking out embeded portion in concrete or brickwork and making disturbed portion good complete all as specified and directed. |
| 13 | Excavation in soft/loose soil as in post holes each n.exc 0.50 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc. 25cm, watering and removing surplus soil complete all as specified and directed. |
| 14 | Demolition of cement concrete (unreinforced) of any description & in any position n.exc 15 cm thick complete all as specified and directed. |
| 15 | Excavation in trenches n.exc 1.5 m wide & n.exc 1.5 m in depth for foundation and getting out in soft/loose soil, complete all as specified and directed. |
| 16 | M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation concrete, complete all as specified and directed. |
| 17 | M&L for PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in foundation concrete for fencing post, complete all as specified and directed. |
| 18 | S&F angle iron fencing post and struts including cutting tops to shape as directed, drilling holes, notching for wire etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc. and similar work conforming to Fe-410-0 or Fe 310-0 any size, complete all as specified and directed. |
| 19 | S&F MS Screw bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut length exc. 5 cm but not exc. 10 cm long 5 to 10 mm dia of shank, complete all as specified and directed. |
| 20 | Supply only chain link MS galvanised mesh (4 mm dia) of any mesh size, complete all as specified and as per site requirment. |
| 21 | Fixing only chain link fencing any mesh size and type to any type of standard rails, straining bolts etc. including provision of binding wire, complete all as specified and directed. |
| 22 | M&L for round bars 10 mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns, hooking ends and binding with and including MS Wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed. |
| 23 | S&F in Repairs Galvanised 2 strand, steel barbed wire 2.24 mm dia, barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed.Note:- Each line wire to be measured. |
| 24 | M&L for preparing new steel surfaces and applying two coats of synthetic enamel paint to new steel surfaces over a coat of red oxide primer surfaces of any description exc. 10 cm in witdth or girth, complete all as specified and directed. |
| 25 | M&L for preparing new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer surface area not exc. 10 cm in width or girth, complete all as specified and directed. |
| 26 | S&F razor wire fencing with 2.6 mm dia centre core wire and 14 mm width & 0.5 mm thick razor strip on swan neck angles and fixed with clamp on angles iron post including all fittings like fastner clips, steel hog rings, nut, bolts etc. and removing old fencing complete all as specified and directed. |
| 27 | Supply and Fix concertina coil 600 mm dia in stretched position hot dip galvanised steel wire coated with CLR anti corrosive paints making diamond shape with the help of dovetail clip (18 SWG) including all fittings like fastner clips, steel lug rings etc. and removing old coil complete all as specified and as directed.Note:- Stretch length of each coil shall be 6 mtr with 50 Nos. rounds per coil. |
| 28 | Demolition of brick work or stone boulders masonary built in cement mortar including all arches, pillars etc. including removal of demolished materials n.exc 50 Mtr etc. complete all as specified and directed. |
| 29 | M&L for brick work with sub class \"B\" brick straight or curved on plan exc. 6.0 m mean radius built in CM 1:6, complete all as specified and directed. |
| 30 | M&L rendering 10 mm thick on fair faces of brick work, cement concrete surface in CM 1:4, surface finish even & smooth without using extra cement, complete all as specified and directed. |
| 31 | M&L for preparation of new plastered surface of wall and applying two coats of cement base paint over a coat of alkali resistant priming paint, complete all as specified and directed. |
| 32 | Framed work as in doors or gates of angle or other section with gusset plates, rails braces etc. complete drilled for fixing of steel sheeting or other covering. To be prepared for hanging, or sliding with and including either hooks and hinges or steel hanging door fittings running rails and guides and haninging also fastening and fixing conforming to FE-410 W (GDE-E-250) Quality-A, complete all as specified and directed. |
| 33 | Dismantling wrought iron or mild steel work of any description, complete all as specified and directed. |
