|
| 1 | [13.27]Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 2 | [13.32]Providing and fixing bolts including nuts and washers complete. |
| 3 | [23.22.1.5]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 1.5. Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. TRIPLE POLE MCCB 200 to 250 Amp, 25 KA |
| 4 | [23.22.5.1]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 5.1. Supply and erection of miniature circuit Breaker240/415 V in the existing distribution board including making necessary connections:- 6 amp. to 32 amp Single Pole |
| 5 | [23.27.2]Supply and erection of Godrej Almirah typeM.S. pedestal made of 50 mm x 50 mm x 6 mm angle iron frame with 3.00 mm thick M.S. sheet covering including shutters with suitable hinges and locking arrangement with Godrej type handle including round bars . The top covering should have downward overhang of 75 mm on all sides of pedestal , having two sets of water proof ventilation holes of suitable size on the sides , at top and bottom , each set containing four Nos. holes to discharge the heat produced by the current . The shutters fixed with rubber gasket of superior quality and of suitable size to make it water proof .The pedestal duly painted both inside and outside with two coats of approved paint and primary coat and its legs are embeded upto the entire depth in 1:2:4 cement concrete block , projected 75 mm all around the pedestal and and 200 mm above the ground level including the cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work:- 2. M.S. pedestal of size 750 mm wide , 900 mm high , 300 mm deep and bottom totally open , duly embeded in cement concrete block of size 900 mm x 450 mm x 200 mm above ground level , having a base of size 1050 mm x 600 mm x 250 mm below ground level . 0 0 |
| 6 | [24.1.1]EARTHING AND LIGHTENING ARRESTOR 1. Earthing with GL earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required. |
| 7 | [24.1.2]EARTHING AND LIGHTENING ARRESTOR 2. Extra for using salt and char coal/coke for pipe earth electrode as required. |
| 8 | [24.1.8]EARTHING AND LIGHTENING ARRESTOR 8. Providing and fixing 25 mm x 3mm G.I. strip on surface or in recess for connections etc. as required with all labour and material. |
| 9 | [24.2.1]LT CABLE 1. Supply & erection of LT phase separator on LT line complete in all respect up to entire satisfaction of the Engineer-in-charge of the work. |
| 10 | [24.2.9.4]LT CABLE 9.4. Supply and erection of straight through joint (cable jointing kit) 1.1 KV grade complete with required quantity of resin, hardener, plastic mould G.P. Putty, adhesive, earth continuity, connections and fixing the same in position complete with joint etc. - Straight through Joint. For 10 to 16 sqmm Cable 3 to 4 Core |
| 11 | [24.2.9.5]LT CABLE 9.5. Supply and erection of straight through joint (cable jointing kit) 1.1 KV grade complete with required quantity of resin, hardener, plastic mould G.P. Putty, adhesive, earth continuity, connections and fixing the same in position complete with joint etc. - Straight through Joint. For 25 sqmm to 50 sqmm Cable 3 to 4 Core |
| 12 | [24.5.2.3]MISCELLANEOUS ITEMS 2.3. S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work.DWC/HDPE pipe 63/50 mm outer dia/inner dia |
| 13 | Supply and erection of PVC insulatedACSR conductor of size 30sqmmconforming to IS 398 (Part-II) 1976/1996, IS 4826-1976 IS 1521-1972 and IS 1778-1980 with latest amendments including stringing and sagging of conductoras well as jointing and binding with insulator at supports complete in all respect up to the entire satisfaction of Engineer-in-Charge. (Rate without GST) |
| 14 | Supply and Erection of shackle insulator brown glazed of size 90 mm x 75 mm suitable for 415 /240 Volt confirming to IS 1545/1977 with latest amendment thereof complete in all respect up to the entire satisfaction of Engineer-In-Charge. (Rate without GST). Make- as approved by DHBVN |
| 15 | Supply and erection of L.T. underground cable armored PVC insulated and PVC sheathed made out of aluminum conductor, 650/1100 Volt, as per IS 7098(part 1) 1988 with latest amendmentsloose in existing pipe or trenches complete with necessary connections Make –Havell’s/ KEI/RR/Polycab (Rate without GST). 25 sqmm X 4 core L.T. cable |
| 16 | S/E of 25 Watt LED Street Light Luminaries with multiple highly efficient LED’s, with individual lens, with reflector, Pressure die cast aluminum housing, heat resistant, enclosed in Poly carbonate/toughened glass IP-66, having light efficacy 120 Lumens/watt of complete in all respect as per specifications attached completeup to the entire satisfaction of Engineer -in-charge of the work. (With 3 years free replacement warranty at site including labour charges free of cost). (Rate without GST).Make:-Bajaj/Philips/ LT |
| 17 | S/E of 72 Watt LED Street Light Luminaries with multiple highly efficient LED’s, with individual lens, with reflector, Pressure die cast aluminum housing, heat resistant, enclosed in Poly carbonate/toughened glass IP-66, having light efficacy 120 Lumens/watt of complete in all respect as per specifications attached completeup to the entire satisfaction of Engineer -in-charge of the work. (With 3 years free replacement warranty at site including labour charges free of cost). (Rate without GST).Make:-Bajaj/Philips/ LT |
| 18 | Supply and erection of 25 mm dia G.I. pipe bracket 1.0 mtr long made out of 25 mm nominal dia (B-class) suitable for street light fitting including 2 nos. Clamps of M.S. Flat size 50x6mm, 6 nos. Nutt and Bolts of size 50x16mm with application of primer and painting complete in all respect up to the entire satisfaction of Engineer-in-Charge. (Rate without GST). |
| 19 | Supply and erection of 32 mm dia G.I. pipe bracket 1.0 mtr long made out of 32mm nominal dia (B-class) suitable for street light fitting including 2 nos. Clamps of M.S. Flat size 50x6mm, 6 nos. Nutt and Bolts of size 50x16mm with application of primer and painting complete in all respect up to the entire satisfaction of Engineer-in-Charge. (Rate without GST). |
| 20 | Supply and erection of 2.5 sqmm 3 core aluminum flexible cable PVC insulated and sheathed core round/flat cable 1100 volts each core having single solid aluminium conductor as per IS: 694, complete in all respect up to entire satisfaction of the Engineer-in-Charge of the work. (Rate without GST). Make – Havells/ polycab/ KEI or make approved by DHBVN |
| 21 | Repair charges of LED street light points up to 25 watt installed on 9 mtr./11 mtr. long PCC /STP poles/High Mast, ON/OFF operation and fault finding of electrical circuits, cost of material charges i.e. Driver/SPD/PCB/ PVC tape roll/screw etc. arranging of T and P i.e.Hydraulic ladder/alum. Ladder, safety belt, safety shoes etc.) on various sectors / master roads complete in all respect up to the entire satisfaction of engineer in charge of work. (rate without GST) |
| 22 | Repair charges of LED street light points from 45 watt to 72 watt installed on 9 mtr./11 mtr. long PCC /STP poles/High Mast, ON/OFF operation and fault finding of electrical circuits, cost of material charges i.e. Driver/SPD/PCB/ PVC tape roll/screw etc. arranging of T and P i.e.Hydraulic ladder/alum. Ladder, safety belt, safety shoes etc.) on various sectors / master roads complete in all respect up to the entire satisfaction of engineer in charge of work. (rate without GST) |
| 23 | Repair charges of LED street light / Flood lights points from 225 watt to 400 watt installed on 9 mtr./11 mtr. long PCC /STP poles/High Mast, ON/OFF operation and fault finding of electrical circuits, cost of material charges i.e. Driver/SPD/PCB/ PVC tape roll/screw etc. arranging of T and P i.e.Hydraulic ladder/alum. Ladder, safety belt, safety shoes etc.) on various sectors / master roads complete in all respect upto the entire satisfaction of engineer in charge of work. (rate without GST) |
| 24 | Supply and erection L.T. Aerial Bunched cable of size 25 sqmm x 4 core with messenger of size 25 sqmm complete with necessary connection complete in all respect up to the entire satisfaction of Engineer-in-charge of the work (Rate without GST) |
