Tender For Special Repairs / Renovation Of Gym Room In Officers Mess Block At Hvf Estate.
Tender Value
64.77 Lakhs
Estimated cost
Bid Submission
25 Jun 2024
0 days left
EMD
1.22 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
avadi → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Special Repairs / Renovation Of Gym Room In Officers Mess Block At Hvf Estate.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each with shutters and handing over to CE(E) stores |
| 2 | Dismantling structural steel work including doors, gates, windows but excluding framed truss etc. |
| 3 | Taking down cement plastering on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. |
| 4 | M & L for Brick work built inCM.1:6 using Sub-Class “B” Bricks. |
| 5 | Demolition of Brick work built in Cement Mortor of any description |
| 6 | Demolition of Reinforced Cement Concrete structure of any description |
| 7 | M & L for plastering in CM 1:4, 15mm thick on fair faces of brick work, concrete surfaces and Door & Window Jamb plastering. |
| 8 | Material and Labour for forming jambs using CM 1:4to opening including cutting, toothing and also facing, jointing and pointing to match existing work complete. |
| 9 | M & L for Dubbing in CM 1:6, 10mm thick in brick work, concrete surfaces |
| 10 | Material and Labour for P.C.C 1:2:4, B1 type using 20mm graded aggregated in foundation and flooring |
| 11 | Providing and fixingfactory made UPVC white color sliding window three track made of extruded profiles with wll thickness of 2.3 mm (+/- 0.2mm) window profile with hollow section with multi chamber frames (88mmx52mm) sliding sash(42mmx57mm Sliding Interlock( one vertical length in each shutter) 45.5mmx28mm) Glazing bead (24.5mmx16mm) will be mitred cut and fusion welded at all corners including railing of holes for fixing hardware and drainage fo water etc., making arranagement for fixing hardware EPDM gasket , 1.20+/- 0.20mm thick galvanized steel frame(30mmx18mm( 2 nos sliding sash (30mmx18mm) Sliding mesh sash(26mmx10mm) profile to be inserted in required profile frame will be fixed to the wall with 8mmx100mm long fastners, Hardware Touch Lock of Zinc alloyed (white powder coated) steel roller systemstainless steel wire cloth 0.36mm nominal dia of wire and average width of aperure 1.40mm and required accessories ( Note the unit rate quoted by the contractor excludes cost of glass and includes all other connected accessories net openint will be measured for payment purpose (a) area n.exc 2.00 Sqm each) and as approved and as directed. |
| 12 | Supply and Fixing of sheet Glass 5.50mm quality and glazing with oil putty in square exc 0.5Sqm in each pare ground or obscured or tinted on one side and as approved and as directed by EIC. |
| 13 | Providing and fixing 75mm high Aluminium skirtingof 1.5mm thick 75mm high extrudedanodized aluminium skirting as per manufacture spec. as perArchitects approval. |
| 14 | Providing and fixing Commercial ply paneling, of 12mm thk. ply finished with 4mm thick. approved Veneer shade with matching grains and finishing with malemine polish (Basic price of veneer is Rs 1200/sqm). (Make: Euro / Greenlam / Century) or suitably equivalent make. |
| 15 | Providing and fixing Commercial ply paneling, of 12mm thk. ply paneling finished in 6mm thick. of approved shade Lacquered Glass/Miror. (Make: Saintgobain /Asahi ) or suitably equivalent make . |
| 16 | Providing & Fixing the suspendedPly ceiling finished with approved 1 mm laminate (Basic rate laminate - Rs.400/ sqm. (Make- Euro/ Greenlam/ Century) or suitably equivalent make. |
| 17 | Providing and fixing doors with wooden door frames in natural anodized finished with 35mm thick Veneer door with vision panels/12mm toughened glass edges panel. Single leaf door frames shall be with door frames up to required height (H) with 4 door hinges. Door shall be fitted with H handle in natural satin finish with door closer, lock and stopper,with 6mm thk vision panel as above (size of the door 1.00 x 2.10 ). |
| 18 | Supply and Fixing of Disply unit made of 18mm thk ply finished in 1mm thk laminate , adjustable glass shelves 4 Nos , Concealed handle, Lock, Hinges etc., height 2.1-2.7 meter height. |
| 19 | S & F of II class hard wood door frame, wrought framed rebated on the solid rounded or chamfered put together with glue pined at joints. |
| 20 | M & L for Cutting chases, pinning in. making good to Brick work / concrete facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth |
| 21 | EXTERIOR EMULSION: M&L for painting two coats of exterior emulsion (MAKE:- ASIAN paint (Apex Ultima) / NEROLAC (Excel Total) / BERGER (Weather Coat Long Life seven) / NIPPON (Weather Bond Advanced) or SuitablyEquivalent., includings one coat of priming paint applies after preparation of the old existing treatment |
| 22 | PLASTICEMULSION: M&L for painting two coats of interioremulsion {Make: Asian(apcolite advanced)/Berger(Easy clean)/Nerolac (Impressions 24 carat)/ Nippon (satin Glo plus)} or Suitably Equivalent make, includings one coat of priming paint applies after preparation of the old existing treatment |
| 23 | WALL PUTTY: Material and labour for applyingone coat of primerandtwo coat of white cement based wall care putty in walls / ceiling inculding removal ofloose/peeloffexisting treatment if anyand as specified in SSR 2020 part-I specification clause 15.19.1 to 15.19.6.4(Make shall be of JK white putty or Birla white wall care putty) or suitably equivalent make |
| 24 | Supply, erection, testing and commissioning of 3.0TR inverter type Cassette Air conditioner unit with refrigent gas, incoming power cables 3xx2.5sq.mm with 4 polw 32 amps weather prrof MCB breaker, copper pipes and communication cables with insulation, condensing unit stand PVC drain pipes and all bye works complete as directed. (MAKE : BLUE STAR/LG/HITACHI/MITSUBISHI/VOLTAS)or Suitabaly Equivalent Make, including necessary tools kit . |
| 25 | M & L for 10mm thick Toughened Glass in fixed position with necessary hardwares in the openings in the wall all complete as directed by EIC. |
| 26 | Supply and Fixing of Granite 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete.to floors / vertical walls of concrete or brick work surfaces using T03 stone tile adhesive. including fixing of stainless steel stone cladding clamps if required for holding of granite slab, the clamp shall be fixed to the floor / concrete wall/brick work complete as direction by EIC. The shade of Granite will be selected by EIC |
| 27 | Material and labour for making nosing /Rounding to edges of Granite stone slabs one edge, such as in steps, platform, skirts, and othersimilar situations complete as direction by EIC |
| 28 | Material and labour for Treatment of soil under existing floor susing emulsion @ one litre per hole,300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing and Anti-termite treatment by appointing a specialised agency as per the specifications mentioned by the Bureau of Indian Standards and Agencies specifications |
| 29 | Material and labour forAnti-termite treatmentAlong the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron. |
| 30 | Supply and fixing of Gl frame (Including Gypsum board False Ceiling) work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mmsuspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26mmeach with lips of 10.5 mm fixed to the intermediate channel withconnecting clips across the intermediate channel at 457 mm centre to centre. including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over G.I, or metal frame workincluding any sunk or raised moulding and any cutting /opening for provision of any lighting fixtures etc. (working at height 4.5 -6 meter). complete all as specified. as approved and as directed |
| 31 | Material and labour for applying mellamine finish glossy/matt in wall/wood etc., whereever required and as directed. |
| 32 | S & F of Framed work such as grills, gates, etc.. with ends of bars shouldered and/or riveted, orforged into spikes; framed guard bars; and hung gates including pintle hinges stops hand made sliding bolts etc ornamental and intricate design . |
| 33 | supply and laying of white pebbles of sizes 30 to 80 mm as selected/approved and directed by EIC. |
| 34 | Supplyof artificial plants of several varities in the Plantation box as directed selected/approved and directed by EIC. |
| 35 | S & F of steel work in tubular trusses including special shaped washer etc., complete drilled for fixing of steel sheeting or other covering and hanging using ERW or induction butt welded tubes confirming to IS-1161 1979 grade St-240 complete as directed by EIC. |
| 36 | M&L Painting on steel surfaces of any description, with 2 coats of synthetic enamelpaint and one coat of primer Red Oxide) and preparation of new surfaces etc, as directed. |
| 37 | Supply and Fixing of fibre glass Reinforced translucent 2mm thick corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc., complete all as directed by EIC. |
| 38 | Supply and Fixng of 5mm thick rubber mattflooring |
| 39 | Supply and fixing of ACP Panels Wooden Finish/Dark Colour with Necessary Aluminium Frame work. and as approved and as directed by EIC . |
| 40 | M & L for Providing 10 mm Toughened glass canopy with necessary powder coated MS section/Stainless Steel section and Hanging Ropes |
| 41 | M & L for providing Natural stone/Brick Linig to wall cladding Finished with Laquer Finish. and as approved and as directed by EIC |
| 42 | Preperation of layour drawing, 2D drawing and 3D presentation as per requirement and as directed by EIC through professional Architect. |
| 43 | Supply and Laying of Buffalo grass including watering etc, complete all as directed. |
| 44 | Excavationof moorum/red bajiri of Hard/dense soi lfromborrow pits for floors or pavings, Removal of excavated soils lead exceeding exc. 1.50 km but n exc. 5 km and depositing where directed. and refilling of soil / loose including spreading, laid in layers n exc. 25 cm thick leveling, watering and well ramming in layerswhere directed. |
| 45 | Supply and Spreading of cow dung manure for the plantations in the proposed site in various stages etc complete all as directed by EIC |
| 46 | Supply and Laying of Hedge plants including watering etc complete all directed. |
| 47 | S & F of PVC (SWR) 110mm dia Pipes single socketed, in any length with rubber ring joints laid in trenches or in floors. |
| 48 | S & F of PVC (SWR) Bend 110mm dia any radius. |
| 49 | Material and labour for Point wiring with 1.5sqmm FRLS PVC insulated sheathed single core cable 1100V grade confirming to IS 694 multi strand copper conductor along with 2mm thick PVC conduuit accessories run on wall/ roof/L angle including M.S. switch box concealed in the wall(made out of 3mm thick sheet) and laminated sun mica sheet 3mm thick cover for housing the switches, regulators and plug socket etc.mount on a wall/roof etc. including 16SWG bare copper earth continuity wire.(Make: Finolux/Havells/Polycab/ Kundan) (or) Suitably equivalent make. a)one light point controlled by one switch light/fan with cables1.5 sqmm size. |
| 50 | Material and labour for Point wiring with 1.5sqmm FRLS PVC insulated sheathed single core cable 1100V grade confirming to IS 694 multi strand copper conductor along with 2mm thick PVC conduuit accessories run on wall/ roof/L angle including M.S. switch box concealed in the wall(made out of 3mm thick sheet) and laminated sun mica sheet 3mm thick cover for housing the switches, regulators and plug socket etc.mount on a wall/roof etc. including 16SWG bare copper earth continuity wire.(Make: Finolux/Havells/Polycab/ Kundan) (or) Suitably equivalent make. b)One 3 pin plug socket with switches flush type 5A on same board with 2.5sqmm cable |
| 51 | Material and labour for Point wiring with 1.5sqmm FRLS PVC insulated sheathed single core cable 1100V grade confirming to IS 694 multi strand copper conductor along with 2mm thick PVC conduuit accessories run on wall/ roof/L angle including M.S. switch box concealed in the wall(made out of 3mm thick sheet) and laminated sun mica sheet 3mm thick cover for housing the switches, regulators and plug socket etc.mount on a wall/roof etc. including 16SWG bare copper earth continuity wire.(Make: Finolux/Havells/Polycab/ Kundan) (or) Suitably equivalent make. c)One 3 pin plug socket with switches flush type 5A on Independent board with 2.5sqmm cable |
| 52 | Supply fixing and connecting to the system modular type switches 6A single pole one way(Make:,LEGRAND MYRIUS equivalent ofLitaski/ Crabtree) or Suitably equivalent make |
| 53 | Supply, fixing and connecting to the system of socket, 6A-2/3 pin combined modular type 2 module (Make:,LEGRAND MYRIUS equivalent ofLitaski/ Crabtree)or Suitably equivalent make |
| 54 | Supply, fixing and connecting to the system modular type switch one way16A, 1 module (Make:,LEGRAND MYRIUS equivalent ofLitaski/ Crabtree) or Suitably equivalent make |
| 55 | Supply, fixing and connecting to the system of socket, 6/16A-2/3 pin combined modular type 2 module (Make:,LEGRAND MYRIUS equivalent ofLitaski/ Crabtree) or Suitably equivalent make |
| 56 | Material & Labour for ceiling rose, 3 Phase/PVC/polycorbonate, isolated body (ANCHOR / LEGRAND/ HAVELLS) orSuitably equivalent make |
| 57 | supply & fixing of lamp holders PVC/polycorbonate type with cord grid cap suitabile for pendant/straight / slanding fittings. |
| 58 | Supply & fixing of modular white cover plate with frame 2 module |
| 59 | Supply & fixing metal flush box for 2 module plate |
| 60 | Supply & fixing of 4 module modular white cover plate with frame |
| 61 | Supply & fixing of metal flush box for 4 module plate |
| 62 | Supply & fixing of 6 module modular white cover plate with frame |
| 63 | Supply & fixing of metal flush box for 6 module plate |
| 64 | Supply & fixing of 8 module plate with frame |
| 65 | Supply and fixing 240V, 10 KA \"B\" curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning. (Make: LEGRAND / HAVELLS / HEGAR) orSuitably equivalent make. |
| 66 | Supply and fixing 415V 10KA \"B\" curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection testing and commissioning. TP 25 To 63 AMP (Make: Legrand / Havells /ABB)or Suitably equivalent make |
| 67 | Supply& fixingof MCCB 3 pole 415 Volt,fixed type 125 Amps, with breaking capacity 16KA. (Make:Legrand/ Havells/ ABB)or Suitably equivalent make |
| 68 | Brick work with subclass \"B\" bricks straight/curved on plan exc 6m mean radius built in (Cement mortar 1:4) |
| 69 | Rendering 10mm thickness on fair faces of brick work surfaces. (cement plaster 1:4) |
| 70 | Material & Labour for wiring with two/four runs of FRLS PVC insulated sheathed single core copper cable upto 1100 volts grade confirming to IS 694 multistrand with copper conductor along with PVC conduit and conduit accessories run on wall/roof one/two run of copper cable as earth wire.(Make: Finolux/Havells/Polycab/ Kundan) or Suitably equivalent make a) 2x2.5 sq.mm+1x2.5 sq.mm earth wire |
| 71 | Material & Labour for wiring with two/four runs of FRLS PVC insulated sheathed single core copper cable upto 1100 volts grade confirming to IS 694 multistrand with copper conductor along with PVC conduit and conduit accessories run on wall/roof one/two run of copper cable as earth wire.(Make: Finolux/Havells/Polycab/ Kundan) or Suitably equivalent makeb) 2x4.0 sq.mm+1x4.0 sq.mm earth wire |
| 72 | Material & Labour for wiring with two/four runs of FRLS PVC insulated sheathed single core copper cable upto 1100 volts grade confirming to IS 694 multistrand with copper conductor along with PVC conduit and conduit accessories run on wall/roof one/two run of copper cable as earth wire.(Make: Finolux/Havells/Polycab/ Kundan) or Suitably equivalent make.c) 2x6.0 sq.mm+1x6.0 sq.mm earth wire |
| 73 | Material & Labour for wiring with two/four runs of FRLS PVC insulated sheathed single core copper cable upto 1100 volts grade confirming to IS 694 multistrand with copper conductor along with PVC conduit and conduit accessories run on wall/roof one/two run of copper cable as earth wire.(Make: Finolux/Havells/Polycab/ Kundan) or Suitably equivalent make d) 4x10.0 sq.mm + 1x10.0 sq.mm earth wire |
| 74 | Material and labour for Brick walls cutting chases,pining in, making good to facing where required and pointing in cement mortor 1:3 to ends and cutting chases forconcealed conduit wiring, etc.,and making good,cutting exc. 10 cm but not exc. 20 cmgrith. |
| 75 | Demolition of cement concreteof any description and in any position |
| 76 | Material and labour for cement concrete 1:2:4 Type B1 using 20mm graded aggregate in foundations, filling and mass concrete. |
| 77 | Excavating in trenches hard dense soil not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying cable. |
| 78 | Material & labour for sand filling for cushioning on U.G cable |
| 79 | Materal &labour for Bricks; common burnt clay building bricks sub class B designation 75, Old size bricks for protection to U.G cable |
| 80 | Returing, refilling of hard dense soil in the excavated trench after laying of power cable including spreading levelling, watering and well ramming in layers not exc 25 cm. |
| 81 | Supply, laying or fixing with suitable clamps or passing through pipe,PVC insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 35 sqmm, 4 core.(Make: Finolux/Havells /Polycab /orbit / Gloster) or Suitably equivalent make. |
| 82 | Supply, laying or fixing with suitable clamps or passing through pipe,PVC insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 70 sqmm, 3.5 core.(Make: Finolux/Havells/ Polycab / Gloster) or Suitably equivalent make. |
| 83 | Supply & fixing of galvanised steel tubes, medium grade 32 mm dia |
| 84 | Supply & fixing of galvanised steel tubes, medium grade 80 mm dia |
| 85 | Taking down copper/aluminium point wiring (light,fan,socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fitting, exhaust fan etc removing materilas to store for keeping in safe custody . |
| 86 | Supply, fixing & connecting to the system of Sheet metal enclosures with double door DB\"s when MCB\"S to be used single pole & neutral 8 way with 200 Amps rated busbar,240V (Make:Legrand/ ABB / Schneider) or Suitably equivalent make |
| 87 | Supply, fixing & connecting to the system of Sheet metal enclosures with double door DB\"s when MCB\"S to be used Triple pole & neutral 4 way with 200 Amps rated busbar,415V (Make:Legrand/ ABB / Schneider) or Suitably equivalent make |
| 88 | Supply, Installation and testing of LED strip light with adaptor, End holder and all accessories complete as required as per site conditions. |
| 89 | Supply & fixingof MCBDB 4 way(DPX160+12) ( legrand make as per legrand 2010 catlogue No.607790 or Equivalant model of ABB/Schneider) or Suitably equivalent make |
| 90 | Supply of Recessed Mounted circle type Luminarie, 15 Watts with suitable LED lamp and accessories, minimum system output: 1000 lumens. (Make: PHILIPS or equivalent of Bajaj/CG/Havells/Wipro) or Suitably equivalent make |
| 91 | Supply, fixing and connecting to the system modular type switch one way20A, Single pole 2 module. ((Make:LEGRAND MYRIUS or equivalent of LITASKI / CRABTREE) or Suitably equivalent make |
| 92 | Supply & fixing metal flush box for 8 module plate |
| 93 | Supply & fixing of 12 module plate with frame and metal flush box |
| 94 | Supply & fixing of 16 module plate with frame and metal flush box |
| 95 | Supply & fixing of modular type Dummy plate |
| 96 | Supply & fixing ofLED, street light fitting with pipe and clamps complte, minimum 7000 Lumens, power consumption 72 watts(maximum). Make: PHILIPS /GE/ WIPRO /CG/OSRAM /BAJAJ/ HAVELLS/ SYSKA) or Suitably equivalent make |
| 97 | Supply, laying or fixing with suitable clamps or passing through pipe,PVC insulated, armoured, heavy duty electric UG cable with copper conductor, 1100 volts grade, cross sectional area 2.5 sqmm, 4 core. (Make: Havells / Gloster / Polycab) or Suitably equivalent make |
| 98 | Supply , erection & connecting of OUT DOOR FPB consisting of 200A MCCB-1 No for incomiong, outgoing feeders are 63A MCCB-6 Nos. Specifcation sheet enclosed as annexure -1(1.0.1 to 1.0.9.5). |
| 99 | Supply, fixing & connecting of the system cable end termination of size 120 sqmm 3.5 core including with double compression suitable cable gland & lugs. |
| 100 | Supply, fixing & connecting of the system cable end termination of size 50 sqmm 3.5 core including with suitable cable gland & lugs. |
| 101 | Supply, fixing & connecting of the system cable end termination of size 35 sqmm 3.5 core including with suitable cable gland & lugs. |
| 102 | Supply, fixing & connecting of the system cable end termination of size 25 sqmm 4 core including with suitable cable gland & lugs. |
| 103 | Supply, fixing & connecting of the system cable end termination of size 16 sqmm 4 core including with suitable cable gland & lugs. |
| 104 | Material & Labour for straight through heat shrink type cable joint, complete with jointing material and accessories suitable for PVC armoured under ground cable of size 120 sqmm 3.5/4 core (Make: Raychem) or suitably equivalent make approved by EIC |
| 105 | Material & Labour for straight through heat shrink type cable joint, complete with jointing material and accessories suitable for PVC armoured under ground cable of size 50 sqmm 3.5/4 core (Make: Raychem) or suitablyequivalent make approved by EIC |
| 106 | Material & Labour for straight through heat shrink type cable joint, complete with jointing material and accessories suitable for PVC armoured under ground cable of size 35 sqmm 3.5/4 core (Make: Raychem) or suitably equivalent make approved by EIC |
| 107 | Material & Labour for straight through heat shrink type cable joint, complete with jointing material and accessories suitable for PVC armoured under ground cable of size 25 sqmm 3.5/4 core (Make: Raychem) or suitably equivalent make approved by EIC |
| 108 | Material & Labour for straight through heat shrink type cable joint, complete with jointing material and accessories suitable for PVC armoured under ground cable of size 16 sqmm 3.5/4 core (Make: Raychem) or suitably equivalent make approved by EIC |
| 109 | Removal of old panel board and cables , termination and glands etc. and handover to stores safely |
AI Tender Summary
Tender Timeline
Jun 10, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedJun 25, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 26, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender