Tender For Construction Of 02 Nos Pre-Fabricated Poly Urethane Foam (Puf) Panel Hut For 05 Men Accommodation For Water Wing At Bop - Tash Pattan And Bop - Bamial Fwd Of 121 Bn Bsf Under Shq Bsf Gurdaspur (Sh - Electrical Work)
Tender Value
1.63 Lakhs
Estimated cost
Bid Submission
18 Jun 2024
0 days left
EMD
3264
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
pattan → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Construction Of 02 Nos Pre-Fabricated Poly Urethane Foam (Puf) Panel Hut For 05 Men Accommodation For Water Wing At Bop - Tash Pattan And Bop - Bamial Fwd Of 121 Bn Bsf Under Shq Bsf Gurdaspur (Sh - Electrical Work)
BOQ
| Sl. No. | Item Description |
| 1 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. Group A |
| 2 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. i) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 3 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. i) 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 4 | Supplying and drawing following sizes of FRLS PVC insulated copper condutor, single core cable in the existing surface/ recessed steel/ PVC Conduit as required. ii) 3 x 1.5 sqmm |
| 5 | Supplying and drawing following sizes of FRLS PVC insulated copper condutor, single core cable in the existing surface/ recessed steel/ PVC Conduit as required. iv) 3 x 4.0 sqmm |
| 6 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. i) 20 mm |
| 7 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. ii) 25 mm |
| 8 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. iii) 50 mm |
| 9 | Supplying and fixing following modular switch/ socket on theexisting modular plate & switch box including connections but excluding modular plate etc. as required i) 5/6 Amp. Switch |
| 10 | Supplying and fixing following modular switch/ socket on theexisting modular plate & switch box including connections but excluding modular plate etc. as required. ii) 3 pin, 5/6 Amp. Socket Outlet |
| 11 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. |
| 12 | Supplying and fixing 3 pin,5 A ceiling rose on the existing junction box / wooden block i/c connection etc as required. |
| 13 | Supplying and fixing 5 A to 32 A rating 240/415 volts,\"C\" curve,miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. Single pole |
| 14 | Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.i) 40 Amp |
| 15 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). 6 way , Double door |
| 16 | Providing and installation of heavy duty exhaust fan 380 mm sweep, 1400 RPM in the existing opening, including making good the damage, connection, testing, commissioningetc. as required. Make havells Model Turbo Force SP/CG |
| 17 | Providing, Installation, testing and commissioning of Pre -wired 20 watt LED fixturetube light( as mirror light) fitting complete with polycarbonate housing ,environmental friendly, energy efficient all accesories directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as equired. MakeHavells (E-LITE LED PRIDE PLUS)/philips |
| 18 | Providing and fixing of 400 MM size Wall fan (metalic body) with suitable size fastners bolts for fixing of wall fan CG make High speed with wire complete with connection, testing commissioning etc as required. Make - Havells(Model No.- D\"zire HS )/ BAJAJ or as per direction by Engg. incharge. |
| 19 | Supplying and Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering A) 2 x 25 Sqmm |
| 20 | Supplying and Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required A) 2 x 25 Sqmm |
| 21 | SITC of 12 V,150AH tubular battery & Inverter of 12 V DC input and 220 V pure sine wave output at rated load 1.5 KVA @ .8 PF, efficiency>=85%including iron stand, internal wiring withPVC insulated copper wire, junction box etc as per manufactorer specification required.Make - Microtek/Luminous/V-guard |
AI Tender Summary
Tender Timeline
Jun 10, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedJun 18, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 19, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender