Tender For Installation Of Deep Tube Well With Platform And Soak Pit At Awc No- 368 Near Sukaru Das House At Ambari Under Cooch Behar Ii Pannchayat Samity.
Tender Value
47475
Estimated cost
Bid Submission
18 Jun 2024
0 days left
EMD
950
Bank guarantee accepted
Document Fee
300
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
ambari → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Installation of Deep Tube well With Platform And Soak Pit At AWC No- 368 near Sukaru Das house at Ambari under Cooch behar II Pannchayat Samity.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 16-Jun-2024 | 1ST CORRIGENDUM | Date | 18-Jun-2024 |
BOQ
| Sl. No. | Item Description |
| 1 | Labour for boring tube well of required dia. by water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting and fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in between the outside of the tubewell pipe and the borefor depth up to 150 m(ii) 50 mm dia. boring etc. |
| 2 | Supply of PVC pipes & fittings (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I).(Item No.: 19(III)), P-13)a) 40 mm dia |
| 3 | Supply of G.I. pipes of TATA make including necessary sockets.(e) 40 mm dia. (ii) Medium quality |
| 4 | Supplying, fitting and fixing popular Maya pump no-6 or similar. For40 mm dia. tube well |
| 5 | Supplying, fitting and fixing steel cutter piece upto 450 mm long with sockets.40 mm dia |
| 6 | Supplying PVC strainer of approved make with adapter conforming to I.S.12818specifications.(i) 40 mm dia. |
| 7 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992(A) (i) Single Socketed 3 Meter LengthPVC Pipes 160 mm |
| 8 | Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineerin- charge. (Payment will be made on centre line measurement of the total pipeline including specials (A) Under ground (iii) 160 mm dia. |
| 9 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992(ii) Plain Teec)160 mm |
| 10 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992Li) Nahani Trap |
| 11 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.a) Depth of excavation not exceeding to 1500mm. |
| 12 | Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with powdered earth or local sand. |
| 13 | Ordinary cement concrete (Mix 1:2:4) with graded stone chips (20mm size) excluding shuttering & reinforcement , if any with |
| 14 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. |
| 15 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups,binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape,placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction. (i) Tor steel/Mild SteelI. SAIL/ TATA/RINL |
| 16 | Hire and labour charges for shuttering with centreing and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works. (upto roof of ground floor)f) 25mm. to 30mm. shuttering without staging in foundation etc. |
| 17 | Brick work with 1st class bricks in cement mortar (1:6)(a) In foundation and plinth |
| 18 | 125 mm. thick brick work with 1st class bricks in cement mortar (4:1) in ground floor. |
| 19 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints or rougening of concrete surface, including throating, nosing and drip course where necessary (ground floor)(c) 15 mm. thick plaster (6:1) |
| 20 | Neat cement punning about 1.5mm thick in wall,dado,window sill,floor etc.NOTE:Cement 0.152 cu.m per100 sq.m. |
| 21 | 1. Building ---- (A) Materials delivered and stacked at siteSand coarse (Finenses moduls not less than 2) |
| 22 | Providing & fixing Concrete Sign Board as per IRC specification of size 900 x 750 x 37 mm. thick made with RCC 1:1½:3 with pakur variety stone chips reinforced with double layer IRC febric (75 x 75 mm. mesh) and fixed with necessary nuts & bolts on two RC precast posts 100 mm. x 150 mm. of height 2.65 m. of which top 750 mm. is of section 100 x 13 mm. and 1.90 metre above GL & 0.75 metre below GL including digging hole, repacking the same with cement concrete 1:3:6 with jhama khoa or with local stone chips etc. complete including painting two coats on both faces lettering sign marks etc. as per direction of the Engineer-in-Charge. (The rate is inclusive of cost of reinforcement, concrete, shuttering, nuts & bolts, washer etc. complete.) |
AI Tender Summary
Tender Timeline
Jun 16, 2024
11:30 IST
Tender Published
Tender notice published.
Completed
Jun 18, 2024
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedJun 18, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 18, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender