Tender For Repair Maintenance Of Certain E/M Works Including Flame Proof Lights Wirings And Connected Items In Domestic Technical Area At Af Stn Bhisiana
Tender Value
Ref. Documents
Estimated cost
Bid Submission
29 Jun 2024
0 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
bhisiana → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair Maintenance Of Certain E/M Works Including Flame Proof Lights Wirings And Connected Items In Domestic Technical Area At Af Stn Bhisiana
BOQ
| Sl. No. | Item Description |
| 1 | Taking down carefully copper/aluminium point wiring (light, fan, socket, bell or power) completeincluding all electrical fittings & fixtures(DBs, submain,cables etc) and making good disturbed surfaces of wall , floor etc and matching wth original colour of wall, complete all as specified & as directed by Engineer in Charge. |
| 2 | Taking down carefully UNSV main switch and DB\"s including MCBs of of any size make, type and capacity and depositing at site as directed by Engineer in Charge. |
| 3 | M&L for point wiring light point / bell point with single core PVC insulated FRLS unsheathed 1100 volt grade cable with stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through in existing concealed conduit, fixed on wall, ceiling with GI saddles GI screws, rawal plugs (concealed conduit wiring) with all fittings including Tee, junction boxes and provision of modular metal flush boxof suitable sizemodular white cover plate with frame for mounting switch sockets and regulators and drawing continuous earth wire with and including PVC insulated unsheathed 1100 volts grade cable with stranded coper conductor of size 1.5 Sq mm (Nominal area) complete all as specified and as directed by the Engineer in Charge for One light/fan/bell point controlled by one switch 6 amp one way :-.NOTE:- After rewiring cutting chasing portion should be matched with existing finishes of wall.s |
| 4 | All as per Item No 3 but forOne 3 pin switch socket combination 6 amp on the independent board. |
| 5 | All as per Item No 3 but for One 3 pin switch socket combination on same board with other switches. |
| 6 | All as per Item No 3 but for one light point controlled by two-2 way switch |
| 7 | All as per Item No 3 but for point wiring with 2.5 sqmm single core multi stranded copper conductor PVC insulated & unsheathed cable 1100 volt grade and 1.5 sqmm PVC insulated and unsheathed cable 1100 volt grade with multi stranded copper conductor for earth wire for 15/16 amp multi purpose socket combination point on independent board. |
| 8 | M&L for switch piano flush type single pole, one way 6amp, complete all as specified and as directed by Engineer in Charge |
| 9 | M&L for switch piano flush typetwo way 5/15 amp, complete all as specified and as directed by Engineer in Charge |
| 10 | M&L for switch piano flush type single pole, one way 15 amp, complete all as specified and as directed by Engineer in Charge |
| 11 | M&L for socket outlet piano flush type 2 in 1 3 pin 5 amp, complete all as specified and as directed by Engineer in Charge. |
| 12 | M&L for socketoutlet piano flush type 3 pin 15 amp, complete all as specified and as directed by Engineer in Charge. |
| 13 | M&L forfan regulator electronic socket type, complete all as specified and as directed by Engineer in Charge. |
| 14 | M&L switch flush type bell push button 6 amp, complete all as specified and as directed by Engineer in Charge. |
| 15 | S&F modular white cover plate with frame, 1 module/2 module, complete all as specified and as directed by Engineer in Charge. |
| 16 | S&F modular white cover plate with frame, 3/4module, complete all as specified and as directed by Engineer in Charge. |
| 17 | S&F modular white cover plate with frame, 6 module, complete all as specified and as directed by Engineer in Charge. |
| 18 | S&F modular white cover plate with frame, 8 module, complete all as specified and as directed by Engineer in Charge. |
| 19 | S&F Metal Flush boxes 1/2 module, complete all as specified and as directed by Engineer in Charge. |
| 20 | S&F Metal Flush boxes 3/4 module, complete all as specified and as directed by Engineer in Charge. |
| 21 | S&F Metal Flush boxes 6 module, complete all as specified and as directed by Engineer in Charge. |
| 22 | S&F Metal Flush boxes 8 module, complete all as specified and as directed by Engineer in Charge. |
| 23 | M&L modular switch 1 way 6 A, 1 module, complete all as specified and as directed by Engineer in Charge. |
| 24 | M&L modular bell push switch, 6 A, 1 module, complete all as specified and as directed by Engineer in Charge. |
| 25 | M&L modular socket, 6A-2/3 pin combined, 2 module, complete all as specified and as directed by Engineer in Charge. |
| 26 | M&L modular switch16 Amps, 1 module with indicator, complete all as specified and as directed by Engineer in Charge. |
| 27 | M&L modular socket16 Amps, 6 pin, 2 module, complete all as specified and as directed by Engineer in Charge. |
| 28 | S&F modular fan step regulator, 120W - 1 module, complete all as specified and as directed by Engineer in Charge. |
| 29 | S&F Bell BuzzerAC 230Volts single pole, complete al as specified and directed by Engineer in Charge. |
| 30 | S&F Bell Ding dong AC 230Volts single pole, complete al as specified and directed by Engineer in Charge. |
| 31 | S&F in repairs Ceiling rose 65x17mm three terminals, complete al as specified and directed by Engineer in Charge. |
| 32 | S&F in repairs lamp holder,PVC/Polycarbonate type and back plate suitable for batten fitting, complete al as specified and directed by Engineer in Charge. |
| 33 | Taking down carefully copper / Aluminium wiring andremoving materials from site, complete al as specified and directed by Engineer in Charge. |
| 34 | M&L submain wiring with 2 runs of copper conductor PVC insulated unsheathed cable 1100 volt grade 4 sqmm drawn through PVC conduit medium grade ISI marked 25mm dia as per IS specification fixed concealed in wall/ceiling including conduit and conduit accessories and incl provn of PVC insulated 2 Sqmm multistranded copper conductor as earth continuity conductor connected to earth dolly all as specified including dismantling old and making good to the disturbed surface by plastering and two coat of distamper all as directed at site Note : Two runs of 4 sqmm cable alongwith one run of 2 Sqmm PVC insulated unsheathed copper conductor as earth wire, conduit and conduit accessories will be measured as one length, complete all as specified and directed by Engineer in Charge. |
| 35 | M&L submain wiring with 2 runs of copper conductor PVC insulated unsheathed cable 1100 volt grade 6 sqmm drawn through PVC conduit medium grade ISI marked 25mm dia as per IS specification fixed concealed in wall/ceiling including conduit and conduit accessories and incl provn of PVC insulated 4 Sqmm multistranded copper conductor as earth continuity conductor connected to earth dolly all as specified including dismantling old and making good to the disturbed surface by plastering and two coat of distamper all as directed at site Note : Two runs of 6 sqmm cable alongwith one run of 4 Sqmm PVC insulated unsheathed copper conductor as earth wire, conduit and conduit accessories will be measured as one length, complete all as specified and directed by Engineer in Charge. |
| 36 | Supply only ISI marked self adhesive PVC electrical insulation Tape roll of 25 mm wide,0.125 mm thick and 25 RM length, complete all as specified and directed by Engineer in Charge. |
| 37 | S&F decorative 45 W LED Strip light including drivers and necessary connections non-integral flexible type with high brihtness for indoor and outdoor applications. Strip can be cut at marked interval to suit desired length complete all as specified and directed by Engineer in Charge. |
| 38 | S&F sheet metal enclosuresDBDouble doordistribution type,04 way,TPN DB , IP43, 415V & suitable for MCB TP as incomming including shruded neutral bar & Pan assy with earthing terminal as provided by manufacturer, complete all as specified and directed by Engineer in Charge. |
| 39 | S&F sheet metal enclosuresDBDouble doordistribution type,06 way,TPN DB , IP43, 415V & suitable for MCB TP as incomming including shruded neutral bar & Pan assy with earthing terminal as provided by manufacturer complete all as specified and directed by Engineer in Charge. |
| 40 | S&F MCB DB TPN 4 Way vertical type factory made IP 43 protection class metal double door with Shrouded Neutral Bar & Pan assembly with connecting link complete including one MCCB upto 125A after dismantling old one, complete all as specified and directed by Engineer in Charge. |
| 41 | S&F MCB DB SPN 8 Way factory made IP 43 protection class metal double door with 200 Amp rating bus bar 240/430V for fixing of MCBs/Isolators/RCCBs etc complete all as specified and directed by Engineer in Charge. |
| 42 | S&F MCB DB SPN 4 Way factory made IP 43 protection class metal double door with 200 Amp rating bus bar 240/430V for fixing of MCBs/Isolators/RCCBs etc complete all as specified and directed by Engineer in Charge. |
| 43 | S&F MCCB 125 Amp 16 Ka for fixing in DB complete all as specified and as directed by Engineer in Charge. |
| 44 | S&F MCCB 63/100 Amp 16 Ka for fixing in DB complete all as specified and directed by Engineer in Charge. |
| 45 | S&F MCBs 240/415 Volts 10 KA finger proof terminal, B curve bi-connect termination, label holder, 35 mm² terminal capacity, insulated sliding shutter, large two position dolly, ISI marked to be fixed on DB .Make :- Legrand / Havells / Standard DB will be measured and paid separately complete all as specified and directed by Engineer in Charge. :- |
| 46 | (a) MCBC curve SPN 40 to 63 Amps. |
| 47 | (b) MCB B curve SP 40 Amp. |
| 48 | M&L in repar earthing complete with galvanized steel earth plate electrode 600x600x6.3 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level,the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15cm on all side and including connected toand includinggalvanized earth lead wire 4.0 mm dia upto 7.5 mtrs long by means ofnuts and bolts, check nuts and washers of GI and connected to earhing test point and earth dollyall as shown in electrical plate No 3 of MES SSR part I and testing on completion includingnecessary excavation and earth work in any type of soil,PCC(1:3:6)type C1 chamber,pre-cast RCC slab 50mm thic in cement concrete (1:2:4),type B1,reinforced with welded steel wire fabric or XPM,(weight not less than 4 Kg per Sqm) with cast iron frame,funnel with watering pipe 20mm dia medium grade,wire mesh and lugs,GI protection pipe,15mm dia,light grade,7.5 mtr long for protection of earth lead upto test point etc all as specified and as directed by Engineer in Charge. |
| 49 | CollectingFans from Storeyard of AGE E/M, ceiling /exhaust/wall mounted fans of any size and any make/model,moving to reputed workshop as directed by GE/Engineer-in-charge , dismantaling the same , cutting and removing the old defective/burnt out winding, cleaning the core of the fan motor, re-winding the fan motor by using machine with supper enemelled copper winding wire and using insulating materials, varnishing the assembly and re-assembling the fan including testing etc. complete all as specified and directed by Engineer-in-charge.MAKE of winding wire : Devi Dayal/Chetak/HTP Thulax. NOTE: All defective / unserviceable parts/items other than winding wire,varnish ,insulating material,bearings, capacitors, and flexible wires shall be measured separately and paid for under respective item of this schedule. |
| 50 | All as per item No. 47 here-in-before but for ceiling fans of 1400 mm sweep any type, complete all as specified and directed by Engineer in Charge. |
| 51 | All as per item No. 47 here-in-before but for ceiling fans of 1200 mm sweep any type |
| 52 | All as per item No.47 here-in-before but for exhaust fans of 230/300 mm sweep any type complete all as specified and directed by Engineer in charge. |
| 53 | All as per item No.47 here-in-before but for exhaust fans of 400/450 mm sweep any type complete all as specified and directed by Engineer in charge. |
| 54 | All as per item No.47here-in-before but for wall mounted fans of upto size 400/450 mm sweep complete all as specified and directed by Engineer in charge. |
| 55 | S & F in repair Capacitor 2.5 mfd fixed in replacement complete all as specified and directed by Engineer-in-charge. |
| 56 | S & F in repair Capacitor 3.15mfd fixed in replacement complete all as specified and directed by Engineer-in-charge. |
| 57 | S & F in repair Capacitor4 mfd fixed in replacement complete all as specified and directed by Engineer-incharge. |
| 58 | S & F in repair Ceiling fan blades (Set of three blades) suitable for 1200/1400 mm sweep ceiling fan duly painted with synthetic enemelled paint fixed in replacement complete all as specified and directed.by Engineer in Charge. |
| 59 | S & F in repair Exhaust fan blades (Set of three blades) suitable for 400/450 mm sweepduly painted with synthetic enemelled paint fixed in replacement complete all as specified asdirected by Engineer in Charge. |
| 60 | S & F in repair Exhaust fan blades (Set of three blades) suitable for 230/300 mm sweepduly painted with synthetic enemelled paint fixed in replacement complete all as specified and directed. |
| 61 | S & F in repair MS clamps for ceiling fans complete with rubber realof any size/make/sweep/model fixed in replacement complete all as specified and directed by Engineer-incharge. |
| 62 | M & L for suitable size of bolts, nuts,body screws, GM bushes and safety pin/split pins for any type/size/make and model ofextg fan as required , fixed in replacement , complete all as specified and directed. |
| 63 | Lathe work/machine work for fitting/housing of in bottom/top cover of fans of any size/ type/ model complete all as specified and directed. |
| 64 | S&F Shaft for any type/size/make and model of fans as required fixed in replacement , complete all as specified and directed. |
| 65 | M&L for Painting of ceiling fans complete,in suit with synthetic enamel paintsby spraying including filling cavities with filliers,one coat after cleaning all dust etc.. |
| 66 | S&F in repair Ball bearing ofceilling fans of any sweep/size/make/model fixed in replacement complete all as specified and directed by Engineer-incharge. |
| 67 | S & F in repair Ball bearing of Exhaust fansof any sweep/size/make/model fixed in replacement complete all as specified and directed by Engineer-incharge. |
| 68 | S & F in repair Upper and lower canopy complete with adjusting screws as required, fixed in replacement complete all as specified and directed by Engineer-incharge.Make: Usha/ Orient/MIE/Jaoco |
| 69 | S & F in repair Down rod 20 mm dia, GI tubing medium grade45 cm to 60 cm long as require fixed in replacement at site complete all as specified and directed. |
| 70 | S & F in repair Louvers made of GI Sheet, suitable for 450 mm sweep exhaust fans fixed in replacement complete all as specified and directed. |
| 71 | S & F in repair Louvers made of GI Sheet, suitable for 230/300 mm sweep exhaust fans fixed in replacement complete all as specified and directed. |
| 72 | S & F rigid non metallicPVC conduit medium grade 20 mm externaldia ISI marked with accessories such as tees, bends,junctin boxes bell mouth tube ends including fixing accessories, locks as couplers lock nuts pipe hooks ets concealed in wallsceiling etccomplete all as specified and directed. |
| 73 | S & F in replacement enviroment friendly recess/surface mounting LED flat panel 2\"x2\", cool white with high efficient LEDs & glare free opal diffuser (36 W) PF>0.95 driver life >25000 Hours, operating range 140v to 280V includingall accessaries, complete all as specified and as directed by Engineer in Charge. |
| 74 | S&F in replacement of Recesses mountingLED slim round downlighter 12 Watt warmwhite with high efficient LEDs & glare free opal diffuser complete all as specified and as directed by Engineer in Charge. |
| 75 | S&F in replacement of wall mounting slim 18/20 Watt 4 feet led Batten luminaire , white with engineering plastic batten with white acrylic cover sleek design & high efficiency for wall and surface mounted applicationscomplete all as specified and as directed by Engineer in Charge. |
| 76 | S&F in replacement of wall mountingLED slim 9/10 Watt 2 feet, white with high efficient LEDs & glare free opal diffuser complete all as specified and as directed by Engineer in Charge. |
| 77 | Supply and fix incl taking down new generation energy saving 9/10 watt LED bulk head (porch light fitting) made of plasitic housing with opal diffuser complete all as specified and as directed by Engineer in Charge. |
| 78 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm, complete all as specified and as directed by Engineer in Charge. |
| 79 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm, complete all as specified and as directed by Engineer in Charge. |
| 80 | S&Fin repair 3 phase 4 wire ACStatic Energy meter of Accuracy Class 1.0, 3 X 240V, 50Hz, with Backlit LCD Display, of rating 10-60A (Measures & Displays kWh,V,I,kW,PF,Hz,Last month history of kWh & MD in kW) with special features like Display in absence of Power with Transparent Hinge type Box all as specified and directed by engr-in-charge. |
| 81 | S&F in repair single phase AC Static Energy meter of Accuracy Class 1.0, 240V, 50Hz, with Backlit LCD Display of rating 5-30A & with 1 push button. (Measures & displays kWh,kVAh, V,I,PF, frequency, kW, kVA, six months history of Energy & MD in kW & kVA) with transparent hinge box complete all as specified and directed by engr-in-charge. Make HPL |
| 82 | Supply and fixing in replacement wall mounted fan plastic body 240 v single phase 50 Hz all as specified and directed by Engineer-in-charge. |
| 83 | M&L for concealed point wiring using approved colour codeing as per IS with halogen free flame retardent (HFFR) smoke free non toxic,non corrosive with copper cable 1.5 sqmm confirming to IS : 694 nominal area single core insulated and unsheathed stranded cable 1100 volt grade and including 20 mm dia. ERW stove enameled concealed conduit heavy duty ISI marked and unsheated copper conductor 1.5 sqmm area as earth wire as earth continuity conductor complete all as specified and directed by Engr-in Charge |
| 84 | Supply and fix 25 mm stove enamelled Rigid steel conduit, welded at joints suitable to be used as conduit for drawing copper wire all as specified and directed by Engineer-in-Charge |
| 85 | Supply, laying and drawn out in steel conduit 2.5 sqmm single core copper wire HFFR insulated industrial cable conforming to IS 17048complete all as specified and directed by Engineer-in-charge.Note :- Steel conduit shallbe measured and paid seperately in respective item. |
| 86 | M&L submain wiring with 2 runs of copper conductor PVC insulated unsheathed cable 1100 volt grade 4 sqmm drawn through ERW steel conduit ISI marked 25mm dia as per IS specification fixed concealed in wall/ceiling including conduit and conduit accessories and incl provn of PVC insulated 4 Sqmm multistranded copper conductor as earth continuity conductor connected to earth dolly all as specified including dismantling old and making good to the disturbed surface by plastering and two coat of distamper all as directed at site.Note : Two runs of 4 sqmm cable for phase and neutral alongwith one run of 4 Sqmm as earthing wire PVC insulated unsheathed copper conductor as earth wire, conduit and conduit accessories will be measured as one length), complete all as specified and directed |
| 87 | S & F flame proof switchsocket and plug combined in LM^ cable termination box in LM6 , 16A, 250V, 2 P+Earth complete all as specified and directed by Engr-in Charge |
| 88 | Supply and fix Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V, complete all as specified and as directed by Engineer in Charge. |
| 89 | Supply and fix ceiling rose 240V, 3 phase/PVC/polycarbonate isolated body, Flame Proof complete all as specified and as directed by Engineer in Charge. |
| 90 | S& F 90 W LED FLAMEPROOF FLOOD LIGHT. 440VAC PROTECTION.10KVA SURGE PROTECTION DEVICES INBUILT, IP67 Rating (Waterproof), CRI : >80%, Premium quality, LED : 130-140lm/w, CCT - 6000-6500K (Cool White)ENERGY SAVING - This LED light offer high effective lighting with low consumption, save up 60% of energy compared with traditional lighting fixturePREMIUM DESIGN - The light quality combined with an incredible durable fixture makes this product perfect for industrial application. Our 50W flameproof light has an IP67 rating which protects against strong rainfall without causing damaging or corrosion to the fixture.Built to last: Excellent heat management with High quality aluminum Heat Sink and special large shape ensure long life. Low brightness decay, that means the output can remain 5 times longer than traditional MH or HID bulb.PROTECTION AVAILABLE: SHORT CIRCUIT, OPEN CIRCUIT, UNDER VOLTAGE, OVER VOLTAGE, ISOLATION, 10KV - INTERNAL SURGE PROTECTION, BIS APPROVED DRIVER, Complete all as specified and as directed by Engineer in Charge. |
| 91 | Supply and fix flame proof exhaust fans of size 380 mmsingle phase AC supply complete and fixing arrangement etc complete with all accessories prewired andincluding connecting up with twin core twisted flexible copper cableFRLS of suitable size incl making hole for fixing of exhaust fan of suitable size and making good disturbed surfaces complete all as specified and directed by Engineer in Charge. |
| 92 | Supply and fix flame proof Wall mounting fans of size 400 mmsingle phase AC supply complete and fixing arrangement etc complete with all accessories prewired andincluding connecting up with twin core twisted flexible copper cableFRLS of suitable size incl making hole for fixing of exhaust fan of suitable size and making good disturbed surfaces complete all as specified and directed by Engineer in Charge.Note-Removing materials to be hand over AGE E/M store for safe custody, complete al as specified and directed by Engineer in Charge. |
| 93 | Supply and fixing LED light fitting 2x 16 watt flame proof ,CMRI certified for gas /vapor group of IIa & IIIB , Zone 1 & 2and IP 65 protection with die cast aluminium housing with heat resistant toughened glass with LED tube light fixtures driver , holders, connectors etc complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size, complete all as specified and directed by Engineer in Charge. |
| 94 | Supply and fix including taking down outdoor decorative LED Post top lantern with LED bulb 7/9/10 watt with spun aluminium die cast Housing cum heat sink PMMA diffuser in IP65 complete all as specified and directed by Engr-in-Charge. |
| 95 | Supply andfix single phase 220/240 VoltFlameproof Distribution Board 4 way with suitable aluminium bus bar complete with all acessories all as specified and as directed by Engineer -in-Charge. |
| 96 | Supply and fix 40 Watt white aluminium diecast flameproof bulk head light fitting 230 Volt IP 65 50 Hz Powder coating all as specified and as directed by Engineer in Charge |
AI Tender Summary
Tender Timeline
Jun 06, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedJun 29, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 01, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender