|
| 1 | Fire Fighting works at Coir Composite Board Factory |
| 2 | Dismantling, shifting and reinstalling the existing fire jockey pump, Diesel pump, main electric pump, pump controller, pipes, valves and NRV’s with additional piping to newly proposed pump room. Civil foundation of the pumps are also included. |
| 3 | Fire Pump 50 HP 2280 LPM @65mtr headSupply, installation testing and commissioning of horizontal centrifugal end suction pump with CI impeller CS shaft gland packed coupled to37 kw 50 HP 2955 RPM, TEFC cage 3 phase induction motor foot mounted base frame with coupling guard etc suitable for 2280 LPM at 65 at 65 mtr head.Make: Kirloskar/lubi |
| 4 | Supply, installation, testing and commissioning of two stage mono block pump with CI impeller, CS shaft gland pack suitable for 65 mtr head and 180 LPM.Make : Kirloskar/lubi |
| 5 | Supply installation testingand commissioning of pressure vessel of 60 Ltr capacity including all accessories required. |
| 6 | Modification work of existing fire pump controller for suitable to new 50 HP (1nos) and 10 HP (1nos) with isolators, contactors, breakers, relays and all other accessories for “Auto” operation with necessary control wiring with inter locking (with existing pumps) |
| 7 | Providing, installation, testing and commissioning of 150mm CI, Y –strainer fabricated out of 1.6 mm thick with stainless steel mesh, grade 304, sheet with 3mmdia holes with stainless steel flange.Make: (kartar/Leader) |
| 8 | Providing, installation, testing and commissioning of 100mm CI, Y –strainer fabricated out of 1.6 mm thick with stainless steel mesh, grade 304, sheet with 3mmdia holes with stainless steel flange. Make : Kartar/Leader |
| 9 | 150 mm NRV for fire pump. Supply, installation, testing and commissioning of Non Return Valve – standard wafer type. (Make: Kartar/Ronak) |
| 10 | 100 mm NRV for fire pump. Supply, installation, testing and commissioning of Non Return Valve – standard wafer type. (Make: Kartar/Ronak) |
| 11 | Supply, installation, testing and commissioning of 150 mm double flanged slim seal type butterfly valves confirming to IS 13095 class 1 with CI wheel and necessary fittings. Make: Kartar/leader |
| 12 | Supply, installation, testing and commissioning of 100 mm double flanged slim seal type butterfly valves confirming to IS 13095 class 1 with CI wheel and necessary fittings.Make : Kartar/leader |
| 13 | Supply, installation, testing & commissioning of 150 mm dia alarm check valve of Cast Iron body and working parts comprising of water motor alarm, bronze seat clapper, hydraulically driven mechanical gong bell to sound continuous alarm when the sprinkler system activates.Make- HD/Newage |
| 14 | Supply and installation of 25 mm ball valves for pressure vessel. Make Kartar/Leader |
| 15 | Supply and installation of 150 mm butterfly valves for sprinkler. Make Kartar/Leader |
| 16 | Supply, installation testing and commissioning of water flow switch suitable to install to 150 mm dia pipe. Make : Potter/Honey well. |
| 17 | Supply and installation of pressure gauge with 0-200 psi (0-14 Kg/Sq.CM) range white background, black graduation scale with dual reading in Kg/Sq.CM & PSI, ¼” BSPT – 50 MM dial.Make : Guru/Wika |
| 18 | Supply, installation, testing and commissioning of industrial type pressure switch having 1/4” BSP(F) connection 14 bar.Make : Danfoss/Indfoss |
| 19 | Supply, testing and commissioning of 15mm gun metal upright/pendent sprinkler heads with quarts bulb and set to operate at a specified temperature as per the specification. Temperature of operation 68 degree celsius.Make : Kartar/Monsher |
| 20 | Supply, installation and commissioning of15mm gun metal curtain sprinkler.Make : Kartar/Newage |
| 21 | Above ground piping: Supply, testing and commissioning of MS pipes “B” class pipes of 25mm dia as per IS:1239 includes all fittings like bends, tees, flanges, nuts bolts, washer etc. The pipes should be installed with welded joints. The above ground pipe are to be applied with single coat of zincchromate primer and double coats of enamel paint. Make : Jindal/Tata. |
| 22 | Above ground piping: Supply, testing and commissioning of MS pipes “B” class pipes of 40mm dia as per IS:1239 includes all fittings like bends, tees, flanges, nuts bolts, washer etc. The pipes should be installed with welded joints. The above ground pipe are to be applied with single coat of zincchromate primer and double coats of enamel paint. Make : Jindal/Tata. |
| 23 | Above ground piping: Supply, testing and commissioning of MS pipes “B” class pipes of 50mm dia as per IS:1239 includes all fittings like bends, tees, flanges, nuts bolts, washer etc. The pipes should be installed with welded joints. The above ground pipe are to be applied with single coat of zincchromate primer and double coats of enamel paint. Make : Jindal/Tata. |
| 24 | Above ground piping: Supply, testing and commissioning of MS pipes “B” class pipes of 65mm dia as per IS:1239 includes all fittings like bends, tees, flanges, nuts bolts, washer etc. The pipes should be installed with welded joints. The above ground pipe are to be applied with single coat of zincchromate primer and double coats of enamel paint. Make : Jindal/Tata. |
| 25 | Above ground piping: Supply, testing and commissioning of MS pipes “B” class pipes of 80mm dia as per IS:1239 includes all fittings like bends, tees, flanges, nuts bolts, washer etc. The pipes should be installed with welded joints. The above ground pipe are to be applied with single coat of zincchromate primer and double coats of enamel paint. Make : Jindal/Tata |
| 26 | Above ground piping: Supply, testing and commissioning of MS pipes “B” class pipes of 100mm dia as per IS:1239 includes all fittings like bends, tees, flanges, nuts bolts, washer etc. The pipes should be installed with welded joints. The above ground pipe are to be applied with single coat of zincchromate primer and double coats of enamel paint. Make : Jindal/Tata |
| 27 | Above ground piping: Supply, testing and commissioning of MS pipes “B” class pipes of 150mm dia as per IS:1239 includes all fittings like bends, tees, flanges, nuts bolts, washer etc. The pipes should be installed with welded joints. The above ground pipe are to be applied with single coat of zincchromate primer and double coats of enamel paint. Make : Jindal/Tata |
| 28 | Supply, installation, testing and commissioning of 20 mm Ball valve. Make Kartar/leader |
| 29 | Supply, installation, testing and commissioning of 50 mm Ball valve. Make Kartar/leader |
| 30 | Supply, installation, testing and commissioning of 80 mm motorized valve. Make U Flow/Potter |
| 31 | Supply, installation, testing and commissioning of yard hydrant valve of 63mm size SS oblique type with female instantaneous hose coupling adaptor with black cap and chain- confirming to IS:5290-1969.Make : Kartar/Newage |
| 32 | Supply, installation testing and commissioning of 63 mm dia 15Mlong non percolating flexible and light weight synthetic fire fighting delivery hose with textile reinforcement, resistant to chemicals, acids, alkalis, abrasions, heat and ozone having 16 Kg/cm2 b pressure including SS instantaneous type coupling, machine wound with copper wire complete in all respects. Make : Katar/Newage |
| 33 | Supply, installation testing and commissioning of SS short branch pipe confirming to IS:903 of ISI mark with 63 mm dia instantaneous coupling on one end and threading 26 mm nozzle.Make : Katar/Newage |
| 34 | Supply, installation testing and commissioning of swing type hose reel drum made of 1mm MS sheet fitted with 20 mm dia X 30 mtr long, high pressure hose with 5mm outlet PVC nozzle with shut off valveMake Kartar/Newage |
| 35 | Supply, installation, testing and commissioning of Hose cabinet having made of 1mm MS sheet with single door and locking arrangements, suitable to accommodate one piece of hose pipe along with one pair of male and female coupling and one branch pipe. The cabinet shall be red colour outside.Make Fiends /safepro |
| 36 | Supply, installation, testing and commissioning of 2 way FBI/FBC with 2 nos 63 mm dia gun metal NRV.Make: Kartar/Newage |
| 37 | Supply, installation, testing and commissioning of 25mm Air Release Valve GM25 mm dia.Make:TBS/Leader |
| 38 | Core Cutting for pipe line works |
| 39 | Supply installation testing and commissioning of manual Call point resettable element and glass assembly.Make : Ravel/Agni |
| 40 | Supply, installation, testing and commissioning of conventional type HootersMake : Ravel/Agni |
| 41 | Alignment & rectification of beam detectors, installation of reflectors |
| 42 | Supply, installation testing and commissioning ofFRLS Armoured 2 core X 1.5 mm cable with all necessary fittings.Make Poly cab/finolex |
| 43 | Supply, installation of Auto Glow type exit/fire exit signages in 3mm Acrylic board 12x4” size. |
| 44 | Supply & installation of Auto Glow type “Assembly Point” signages. Sinages in 3mm acrylic board 16x14” size. |
| 45 | Cabling works of all the pumps from the fire panel |
| 46 | Preparation of drawing & documentation for Fire NOC:Preparing the fire drawings- (CAD drawings to be provided to prepare the drawings)Preparation of documents to submit to the fire departmentSubmission of documents & application to the department and it’s followup and laison work with the authorities.Coordinating and attending the inspection |
