Tender For Repair/Maintenance Of Joinery, Floorings, Plastering, Roofing Etc At Jcos And Ors Md Accommodation At Aec Trg College And Centre Pachmarhi.
Tender Value
9 Lakhs
Estimated cost
Bid Submission
24 Jun 2024
0 days left
EMD
18000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pachmarhi → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair/Maintenance Of Joinery, Floorings, Plastering, Roofing Etc At Jcos And Ors Md Accommodation At Aec Trg College And Centre Pachmarhi.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of Plain or corrugated steel sheeting, Pre painted galvatume aluminium Zinc Coating any gauge, thickness, including Nainital or similar pattern roof coverings all as specified and directed. |
| 2 | Dismantling wrought iron or mild steel work of any description complete all as specified. |
| 3 | S&F Roof trusses (Framed),trussed,purlins,crane gantries,rails and fastenings and heavy bracket framing(Beam,tee,angle,channel or flat sections)including distance pieces,cleats etc complete all as specified and as directed. |
| 4 | S & F for Pre- painted galvatume aluminum zinc coating GI based corrugatedsteel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified all as specified and directed. |
| 5 | S & F for Pre- painted galvalume aluminum zinc coating GI based plainsteel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified all as specified and directed. |
| 6 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets. |
| 7 | M&L for suspended false ceilling comprising of 6mm thick non asbestos fibre cement bulding boards fixed or laid/inserted to GI frame work with screws over Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified |
| 8 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water etc. |
| 9 | Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quions, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles all as specified and directed. |
| 10 | Material & labour old size brick work with sub class \"B\" bricks in CM 1:6 brickstraight or curved on plain exeeding 6m mean radius complete all as specified and directed. |
| 11 | M & L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement plaster 1:4 using WPC 3% by weight of cement (WPC to be measured and paid separately) and finished even and smooth (without using extra cement) complete all as specified and directed. |
| 12 | M & L for rendering 12mm thick on fair faces of brick or concrete surfaces in cement plaster 1:6 and finished even and smooth (without using extra cement). |
| 13 | Supply only integral water proofing compound of approved brand/make. |
| 14 | M&L for preparing New plastered surfaces of wall and applying two coats of oil emulsion distemperover a coat of chalk whiting on plastered surface complete all as specified and directed. |
| 15 | M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint with alkali resistant priming paint complete all as specified and directed. |
| 16 | Taking down chowkats or frames not exc 1.5 sqm each with shutter (without taking off shutter from the frame) and removing complete all as specified and directed by Engr-in-charge. |
| 17 | Taking down chowkats or frames exc 1.5 sqm but not exceeding 4 sqm each but with shutter (without taking off shutter from the frame) and removing to storecomplete all as specified and directed by Engr-in-charge. |
| 18 | Taking downShutters of any description n exc 1 sq. m each |
| 19 | Taking down shutters of any description exceeding 1Sq. M but not exceeding 2 Sq. M each |
| 20 | S & F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints. |
| 21 | S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube supplying & fixing in opening as per specified & drawing. |
| 22 | S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C\" channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 23 | S & F 35mm Second class hard woodPlain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to Chowkatcomplete all as specified and directed by Engr-in-charge. |
| 24 | Supplyand fixing factory made flush shutters 40 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides, ISI marked complete all as specified. |
| 25 | S & F 35 mm thick second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars) chamfered or rounded,fitted with cut and mitred beads for securing glass etc., sizes of members of shuttersas specified in SSR Pt I Section 8, clause 8.24 (a) |
| 26 | S & F 30 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc. for windows and ventilators etc |
| 27 | S & FStainless steel wire cloth, 0.63 mm dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples. |
| 28 | S&F in repairs galvanised mild steel wire cloth, 0.56mm nominal dia wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staple,wooden beads or galvanised steel small nut and bolts etc. |
| 29 | Hacking out old glass (any thickness,size,quality or description)from wooden frames or stone,concrete or brick surrounds ,glazed with putty or fixed with beads complete all as specified and as directed. |
| 30 | Supply and Fix plain sheet glass/pin headded glass of 4 mm thick in Squares not exceeding 0.50 Sqm in each pane with oil putty and clips complete all as directed by Engineer-in-Charge. |
| 31 | Supply and fixing mild steel works in bands, straps, supports, stays, bolts, hooks, hold fasts etc, similar articles conforming toFe-290.Gde-E-165, complete all as specified and directed. |
| 32 | M & L for providing cement concrete Type C1 1:3:6 using 20mm graded stone aggregate as in Hold fast block. |
| 33 | S & F 75 mm long extruded mild steel anodised Butt hinges with galvanized mild steel and fix |
| 34 | S & F 100 mm long extruded mild steel anodised Butt hinges with galvanized mild steel and fix |
| 35 | Supply& fixing Aluminiumbarrel tower bolt of 150mm long stove enamelled black withbrightbolt complete all as specified and directed by Engr-in-charge. |
| 36 | Supply& fixing Aluminiumbarrel tower bolt of 75 mm long stove enamelled black withbrightbolt complete all as specified and directed by Engr-in-charge. |
| 37 | S & F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts oftruded sections or cast-aluminium alloy and fixed complete all as specified anddirected by Engr-in-charge. |
| 38 | Supply& fixing Aluminium alloy pressed handle oval type stove enamelled black of 125mm long fixed with screw to shutter complete all as specified and directed by Engr-in-charge. |
| 39 | Supply& fixing Aluminium alloy pressed handle oval type stove enamelled black of 75 mm long fixed with screw to shutter complete all as specified and directed by Engr-in-charge. |
| 40 | Preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer. |
| 41 | M & L for preparation of newpainted steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint (first quality) over red oxidecomplete all as specified and directed by Engr-in-Charge. |
| 42 | Demolition of cement concretein ground floors and pavingsincluding tiles not exc 15cm thick complete all as specified and directed. |
| 43 | Material and labour for 40mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in floor finished even and smooth with out using extra cementcomplete all as specified and directed . |
| 44 | M &L for 75 mm thick cement concrete type C-2, 1:3:6 using 40mm graded stone aggregate finishing surface even and smooth without using extra cement as in plinth protection complete all as specified and directed. |
| 45 | Dismantling of floor,hearth or wall tilling including cement mortor bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 46 | M & L for non skid coloured ceramic tiles 7 to 8mm thick square / rectangular area of each tile exc 0.11 Sqm but not exc 0.18Sqm as in floor laid over 15 mm thick screed bed in CM 1:6 as in floor etc. set and jointed in neat cement slurry and pointed in coloured cment to match colour tiles complete all as specified. |
| 47 | M & L for non skid coloured ceramic tiles 7 to 8mm thick square / rectangular area of each tile exc 0.18 Sqm but not exc 0.38Sqm as in floor laid over and including 15 mm thick screed bed in CM 1:6 as in floor etc. set and jointed in neat cement slurry and pointed in coloured cment to match colour tiles complete all as specified. |
| 48 | M & L for Glazed ceramic tilesin vertical surface 350x250x7mm/ 450x300x7mm thick, set and jointedin neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in cm 1:4 complete allas specified. |
| 49 | Material and labour for Premium quality, glazed coloured ceramic tiles 200 x 300 x 7mm thick on vertical faces including 10mm thick rough finished plaster in cement mortar (1:3) set jointed in neat cement slurry and pointed in coloured cement to match ,complete all as specified. |
| 50 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed |
| 51 | Material and labour for machine cut kota stone slab 20-25 mm thick (of size not less than 55 cm x 55 cm) laid and jointed with grey cement slurry mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing (Granite finish) over and including cement screed bed 20 mm thick in cement mortar (1:6) baseincluding rubbing and mirror polishing, complete all as specified. |
| 52 | Supply andfixing framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; angle iron chowkats for door ,barred iron doors; ladders framed balusters; walk ways; railings; and similar work conforming to Fe-290-Gde E-165 complete all as specified. |
AI Tender Summary
Tender Timeline
Jun 04, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedJun 24, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 26, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender