Tender For Procurement Of Led Lights Fixtures 2.1 First Fitting Items:- LED lights as per luminous level required by class rules shall be used for all lighting on board ship except where specifically mentioned or not permitted by Class rules/SES 10 LED Weather Deck light 12W WT (IP-56), LED Weather Deck light fitting of cast aluminium body with polycarbonate white diffuser, 2 Nos. PG type cable entry Glands, LED Modules of approx. 12 W power complete with rubber gasket etc. Light source type CRI 80, Minimum 6500K Input Supply Voltage: 230V AC, 1 phase, 50 Hz. ii. LED Pendant Light 3W with Red Shade WT (IP-56), LED type Pendent light fitting with RED Shade of cast aluminium body with polycarbonate diffuser, 2 Nos. PG type cable entry Glands, LED Modules of approx. 03 W power complete with rubber gasket etc. Light source type CRI 80, Minimum 6500K Input Supply Voltage: 230V AC, 1 phase, 50 Hz. LED Tube Light 24W with Opal diffuser:- IP-56, Surface Lights of cast aluminum body with polycarbonate white diffuser complete with 2 Nos. cable entry glands, Mounting Brackets and LED Module of approx. 24W power, Light source type CRI>80, Minimum 6500K Input Supply Voltage: 230V AC, 1 phase, 50 Hz iv. 24V DC Emergency Pendant LED Light IP-20, Surface LED type light fittings of cast aluminium body, Polycarbonate white diffuser of approx. 12W power, complete with 2 Nos. cable entry glands, rubber gasket, Mounting Brackets etc. Light source type CRI>80, Input Supply Voltage: 24V DC V LED Pendant Light 12W with Semi Milky Diffuser WT (IP-56), LED module type Pendent light fittings of cast aluminium body with polycarbonate white diffuser, 2 Nos. PG type cable entry Glands, LED Module of approx. 12W power, complete with rubber gasket, Mounting Bracket etc. Light source type CRI>80, Minimum 6500K, Input Supply Voltage: 230V AC, I phase, 50 Hz vi. Bilge light WT (IP-67), LED type Bilge light fitting of cast aluminium body with polycarbonate white diffuser, 2 Nos. PG type cable entry Glands, LED Modules of approx. 12 W power complete with rubber gasket etc. Light source type CRI 80, Minimum 6500K Input Supply Voltage: 230V AC, 1 phase, 50 Hz. vii. Water Tight Flood Lights 100W WT (IP-56) wide beam flood light, minimum 100W LED with cast aluminium body, 2 nos. cable entry gland and mounting bracket. Light source type CRI ≥80, Approx. 6500 K Input Supply Voltage: 230V AC, 1 phase, 50 Hz
