|
| 1 | B&R PORTION:-Demolition of cement concrete (unreinforced) in ground floors and paving n. exc 15 cm thickness, below or aboveground level complete all as specified and directed. |
| 2 | Demolition of brick work or stone/boulder masonry build in cement mortar including all quoins arches pillars etc. complete all as specified and directed. |
| 3 | Dismantling fencing wire mesh, any type complete all as specified and directed. |
| 4 | Dismantling posts or struts steel or RCC embedded in concrete any section including taking out embeded portion and making good distrubed groung complete all as specified and directed. |
| 5 | Dismantling of steel or wrought iron or mild steel, barbed wire of any description not otherwise provided for complete all as specified and directed. |
| 6 | Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 7 | M & L for plain cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregates as in mass concrete, filling in, foundation and flooring complete all as specified and directed. |
| 8 | M & L Stone masonry walling of random rubble, bedded and solidly hearted built in CM 1:6 brought upto courses complete all as specified and directed. |
| 9 | All as per Ser item No 8 above but except stone complete all as specified and directed. |
| 10 | M & L forbrickwork with sub class B bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed. |
| 11 | All as per Ser item No 10 above but except brick complete all as specified and directed. |
| 12 | M & L for precast cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregates as in bond stones walling, bed plates, anchorage blocks etc and set in CM 1:6 complete all as specified and directed. |
| 13 | Extra over stone walling for hammer dressing to face stones and dressing or face beds and joints with max depression 20 mm as specified, of random rubble walling, uncoursed or brought upto courses complete all as specified and directed. |
| 14 | M & L for plain cement concrete 1:2:4 type B-1, (using 20mm graded stone aggregates) as in bed block, coping, benching and similar work including necessary form work complete all as specified and directed. |
| 15 | M&L for boulder filling dry, as in back filling for retaining wall complete all as specified and directed. |
| 16 | M & L for rendering 20 mm thick in cement mortar 1:4 on other than fair faces of brick work or stone masonary surfaces, chajja and suspended work finished even and smooth without using extra cement, complete all as specified and directed. |
| 17 | M & L for flush pointing to random rubble masonry, uncoarsed, in cement mortar 1:3 complete all as specified and directed. |
| 18 | M & L for 15mm thick rendering in CM 1:4 on fair faces of brickwork or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. |
| 19 | Material & Labour for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces of walls complete all as specified and as directed. |
| 20 | M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base to flooring/path etc. finished even & fair, complete all as specified and directed. |
| 21 | M & L for plain cement concrete 1:2:4 type B-2, using 40mm graded crushed stone aggregates as in surfaces channels and drain complete all as specified and directed. |
| 22 | Extra for forming fair finished drain or channel 30 cm inner grith in cement concrete, using extra cement including forms, moulds mitred/stopped ends etc. complete all as specified and directed. |
| 23 | Excavation in post holes (or similar holes) each n exc 0.5 cu.m, getting out in any type of soil(soft/loose and hard/dense soil), returning, filling inand ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and directed. |
| 24 | M & L for mild steel as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed. |
| 25 | Supply only Chain link MS galvanised fencing, any size or type complete all as specified and directed. |
| 26 | Fixing only chain link fencing including linewires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed. |
| 27 | S & F in repair galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, incl securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed. |
| 28 | M & L for mild steel round bars 10mm dia and over Gde Fe-410 W over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 29 | M&L for mild steel screw bolts (machine made) 5 to 10mm dia of neck with hexagonal or square head at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n. exc 5cm long (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 30 | S & F mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railling; framework of water tanks and similar work conforming to Fe 290-Gde E-165 complete all as specified and directed. |
| 31 | S&F MS framed work such as steel gates, including pintle hinges, stops, han made sliding bolts etc and similar work conforming to Fe 290-Gde E-165 complete all as specified and directed. |
| 32 | M&L for preparation of new untreated steel and iron surfaces of any description over 10 cm in girth or width not otherwise described and applying two coats of synthetic enamel paint over one coat Red oxide zinc chrome primer etc complete all as specified and as directed by Engr-in-Charge. |
| 33 | M&L for chequered cement concrete tiles with chemical resistant coating if size 300x300x 25mm thick, set & jointed in neat cement slurryin floors and pointed with grey cement mixed with pigments, laid over and including 15mm thick screed bed in CM 1:4, complete all as specified and directed. |
| 34 | M&L for high traffic endura tile 20 mm thick, jointless, laid over and including 15mm thick screed bed in CM 1:4, complete all as specified and directed. Make : Johnson Endura/ Orientbell |
| 35 | M&L for sand filing under floor and spreadingand leveling in layers not exc 25cm thick complete all as specified and directed. |
| 36 | M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 80mm thickness M-40 Grade,laid jointed pointed with grey cement and no pigments,complete all as specified and directed by Engr-in-Charge. Note: The sample shall be got approved by GE before bulk procurement & lot shall be got tested independently by the GE. |
| 37 | E/M PORTION: M&L for complete servicing and repair of RO Plantof any capacity, servicing, cleaning or replacement of all accessories and re-fixing in the same in position, testing complete all as specified and directed by Engr-in-Charge. Noe:- Unsv accessories will be measured and paid seperately under respective items No 38 to 41 of Sch |
| 38 | Supply only micron cartridge filter sponge 4\" x 20\" of 4 micron suitable for existing RO plant complete all as specified and directed. |
| 39 | Supply only micron cartridge filter sponge 2\" x 10\" of 4 micron suitable for existing RO plant complete all as specified and directed. |
| 40 | Supply only RO membrane concealed type, 75 GLD suitable for existing RO plant complete all as specified and directed. |
| 41 | Supply only RO membrane concealed type, 400 GLD suitable for existing RO plant complete all as specified and directed. |
| 42 | Disconnecting electric & water connection to geyser of capacity 25/35/50 litr, taking down from existing position, dismantling and inspecting all the parts for its serviciability, cleaning of serviceable parts i.e. heating element, base assembly, connecting lead, thermostat, electric contact, electric wiring, indicators, safety valves etc re-fixing in the same in position, testing complete all as specified and directed by Engr-in-Charge. Notes: (i) The defective parts to be replaced shall be measured and paid separately under relevant item No 53 to 63 of Sch \"A\"as supply only (ii) Cost of minor items i.e. screws, nuts, bolts etc shall be deemed to be included in this item |
| 43 | Supply only heating element of capacity 2 KW, ISI marked with rubber gasket suitable for existing size, type & make of geyser complete all as specified and as directed. |
| 44 | Supply only heating element of capacity 1.5 KW, ISI marked with rubber gasket suitable for existing size, type & make of geyser complete all as specified and as directed. |
| 45 | Supply only thermostat, ISI markedsuitable for existing size, type & make of geyser complete all as specified and as directed. |
| 46 | Supply only indicator lamp suitable for existing size, type & make of geyser complete all as specified and as directed. |
| 47 | Supply only geyser safety valve suitable for existing size, type & make of geyser complete all as specified and as directed. |
| 48 | Supply onlyPVC pipe connection of heavy duty for inlet, outlet connection suitable to withstand the pressure and temperature complete all as specified and as directed. |
| 49 | Supply onlyaluminium/chromium type flexible connection, heavy duty for inlet, outlet connection suitable to withstand the pressure and temperature complete all as specified and as directed. |
| 50 | Supply only inner tank made out of steel sheet conforming to IS, suitable for 25 litres capacity of geyser, vertical type complete all as specified and as directed. |
| 51 | Supply only inner tank made out of steel sheet conforming to IS, suitable for 35/50 litres capacity of geyser, vertical type complete all as specified and as directed. |
| 52 | Supply only new base assembly with inlet and outlet pipe made out of steel sheet with gasket and proper size of nuts, bolts and washer etc suitable for 25 litres capacity of geyser complete all as specified and as directed. |
| 53 | Supply only new base assembly with inlet and outlet pipe made out of steel sheet with gasket and proper size of nuts, bolts and washer etc suitable for 35/50 litres capacity of geyser complete all as specified and as directed. |
| 54 | M&L for taking down geyser of capacity 25/35/50 litres and Supply and fix new electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessoriessuch as safety valve, thermostate, NRV, connection piece etc.complete all as specified and as directed. |
| 55 | Supply & Fixed in repair steel water tubing 15 mm bore medium grade galvanised with all fittings (ISI marked) fixed complete to walls, ceiling or laid in floors complete all as specified and directed. |
| 56 | Supply & Fixed in repair steel water tubing 20 mm bore medium grade galvanised with all fittings (ISI marked) fixed complete to walls, ceiling or laid in floors complete all as specified and directed. |
| 57 | S&F in repair 15mm dia Gun-metal, globe gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. |
| 58 | S&F in repair 20mm dia Gun-metal, globe gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. |
| 59 | Taking down carefully unsv sub main wiring including earth continuity any type/ size with surface casing/ caping/ TW batten/ PVC conduit surface or recess etc and removing materials from sites and making good distrubed surface of walls and roofs complete all as specified and directed. |
| 60 | S&F Sub main wiring with single core cable 2x 4 Sqmm FRLSinsulated unsheathed stranded copper conductor cable 1100 Volts grade including surface PVC casing capingmedium grade alongwith 1x 4 Sqmm FRLS insulated unsheathed copper conductor cable as earth wire connected with main earth dolly, complete all as specified and directed.Note:-Three wire of 4 sqmm and one run of PVC conduit/casing caping shall be measured as one unit. |
| 61 | Taking down carefully copper/ aluminium unserviceable/ perished point wiring (light, fan, socket or power complete including fixture and fittings such as switches, ceiling roses, pandents, regulators, sockets, light fittings,removing material from site for taking credit etc and making good disturbed surfaces of wall, floors, complete all as specifiecd and directed. |
| 62 | M&L for point wiring with two single core 2.5 Sqmm (nominal cross section area) FRLS PVC insulated unsheathed multistranded copper conductor cableand one single core 2.5 Sqmm(nominal cross section area) FRLS PVC insulated unsheathed multistranded copper conductor cable as earth continuity to common earth and connecting to earth dolly running in and including PVC casing & caping (ISI marked) of suitable size with PVC boards of appropriate sizes and all requisite accessories such as PVC elbow, Tee, collars, bends etc. with PVC terminals box & cover for mounting swtches, sockets, fan regulator etc for mounting switches, sockets, fan regulators etc for one 15/20 amps socket outlet independent board controlled by one 15 amp switch complete all as specified and as directed. |
| 63 | M&L for point wiring with two single core 1.5 Sqmm (nominal cross section area) FRLS PVC insulated unsheathed multistranded copper conductor cableand one single core 1.5 Sqmm(nominal cross section area) FRLS PVC insulated unsheathed multistranded copper conductor cable as earth continuity to common earth and connecting to earth dolly running in and including PVC casing & caping (ISI marked) of suitable size with PVC boards of appropriate sizes and all requisite accessories such as PVC elbow, Tee, collars, bends etc. with PVC terminals box & cover for mounting swtches, sockets, fan regulator etc for mounting switches, sockets, fan regulators etc for one socket outlet 5 amps controlled by one switch on independent board complete all as specified and as directed. |
| 64 | S&F in repair socket outlet2 in 1, 3 pin, 6 Amp flush type universal, complete all as specified and directed. |
| 65 | S&F in repair Switch socket combination, 2 in 1,pin, 5 and 15 Amp flush type universal, complete all as specified and directed. |
| 66 | S&F in repair single pole and neutral enclosure with a two pin and metal earth plug and socket complete with & incl one single pole MCB of 20 Amps complete all as specified and directed. |
| 67 | S&F in repair sheet metal enclosure for DBs, SPN double door (IP43), 4 ways built in bus bars suitable for 240 volts, AC, 50 Hz, including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning complete all as specified and directed. |
| 68 | S&F in repairMCBSPN 40-63 amps 415 volts 10 KA \"C\" series, complete all as specified and directed.Make:-Havells cat part No- DHMGCSNF040 - DHMGCSNF063 or Equivalent cat part of make as specified in P.S. |
| 69 | S&F in repair MCBsingle pole 6 to 32 amps 240 volts 10 KA \"C\" series complete all as specified and directed.Make:-Havells cat part No-DHMGCSPF006-032 or Equivalent cat part of make as specified in P.S. |
| 70 | M&L for complete servicing and repair of solar water heating system of any capacity, servicing, cleaning or replacement of all accessories and re-fixing in the same in position, testing complete all as specified and directed by Engr-in-Charge. Note:- Unsv accessories will be measured and paid seperately under respective items No 71 to 77 of Sch as supply only |
| 71 | Supply only solar water heater collector FPC type screw less technology suitable for existing solar water heating system, ISI marked complete all as specified and as directed. |
| 72 | Supply only solar collector glass suitable for existing solar water heating system complete all as specified and as directed. |
| 73 | Supply only Glycol for solar water heating system complete all as specified and as directed. |
| 74 | Supply only solar collector with copper brazing complete all as specified and as directed. |
| 75 | Supply only heating element of capacity 3 KW, ISI marked suitable for existing solar water heating system complete all as specified and as directed. |
| 76 | Supply only make up tank of 5 Ltr capacity for existing solar water heating system complete all as specified and as directed. |
| 77 | Supply only gasket and end joints suitable for existing solar water heating system complete all as specified and as directed. |
| 78 | Taking down old unsv street light fittings any type from pole/ wall/ other similar situation and refixing, re-connecting the same in existing position after carrying out necessary repair/ replacement of unsv accessories to make the fittings functional, complete all as speecified and directed.Note:-Accessories required to make the fittings functional shall be measured & paid seperately as supply only under relevent items. |
| 79 | Taking down old unsv street light fittings any type from pole/ wall/ other similar situation and replacing with new solar street light 24 watt with lithium ion battery integrated type, aluminium dia cast with IP-66 protection with all accessories, complete all as speecified and directed. |
| 80 | Supply only LiFe P04 battery, 12 Volt, 24/26 AH suitable for street light fitting complete all as specified and directed. |
| 81 | Supply only mono crystalline SPV panel suitable for solar treet light fitting complete all as specified and directed. |