Tender For Repair Or Renovation Of Moulding Shop And Lcs Shop Of Boot Plant Inside Factory At Oefc
Tender Value
35 Lakhs
Estimated cost
Bid Submission
04 Jun 2024
0 days left
EMD
70000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kanpur → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair Or Renovation Of Moulding Shop And Lcs Shop Of Boot Plant Inside Factory At Oefc
BOQ
| Sl. No. | Item Description |
| 1 | M&L Rendering 15mm thick cement plaster 1:4 on fair faces of brick work or concrete surfaces of wall, after brushing neat cement slurry with 3.0kg of cement per Sqm , finished even and smooth (without using extra cement) including taking down.Cement Make: Ultratech/Ambuja/ACC/Birla only acceptable. |
| 2 | M&L3mm thick wall care putty on wall. |
| 3 | M&LPriming plastered and other surfaces with alkali resistant priming paint on wall. |
| 4 | M&LPreparing new or previously untreatedwall surfaces and apply two coat of distemper oilemulsion. Make:-Berger/ Nerolac/ Shalimar/Asian/Nippon |
| 5 | M&LPreparing ofold painted wall surfaces & apply two coat of distemper oilemulsion.Make:-Berger/ Nerolac/ Shalimar/Asian/Nippon |
| 6 | M&LPreparing new or previously untreatedwall surfaces and apply two coat of Cement Paint.Make: - Snowcem/Asian, Adarsh/ Gillden/Amar/Sunshine/Berger/Nerolac/Shalimar. |
| 7 | M&LPreparing old painted wall surfaces and apply two coat of Cement Paint.Make: - Snowcem/Asian, Adarsh/ Gillden/Amar/Sunshine/Berger/Nerolac/Shalimar. |
| 8 | M&L Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)Make:-Berger/ Nerolac/ Shalimar/Asian/Nippon |
| 9 | M&L prepairing old steel surfaces and applying two coats synthetic enamel paints.Make:-Berger/ Nerolac/ Shalimar/Asian/Nippon |
| 10 | M&L Preparing new or previously untreated steel surfaces and applying two coats synthetic enamel paints with primer one coat of Red Oxide .Make:-Berger/ Nerolac/ Shalimar/Asian/Nippon |
| 11 | S&F Welded steel wire fabric supplied and fixed complete to wood or steel members. |
| 12 | Demolition and dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof/wall coverings. |
| 13 | S/F Pre- painted galvatume aluminum zinc coating GIbased corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.Make: Tata/Jindal only acceptable. |
| 14 | S&F 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc. |
| 15 | M/L of Glazed ceramic coloured tiles in vertical surface 300x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tile. Make: Kajaria/Somany/Jahnson only acceptable. |
| 16 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. |
| 17 | S&F Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of Cementmortar 1:4, 20 mm thick for laying floor finishes.Make: Kajaria/Somany/Jahnson only acceptable. |
| 18 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. |
| 19 | M/L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of Cementmortar 1:4, 20 mm thick for laying floor finishes.Make: Kajaria/Somany/Jahnson only acceptable. |
| 20 | S&F Fe-410- W(Gde-E-250) quality-A Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete. |
| 21 | S&F 1.25 mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required |
| 22 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-incharge. |
| 23 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) |
| 24 | Demolition and dismantling of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) |
| 25 | M&L P.C.CType B-0, 1:2:4 (12.5 mm Graded Aggregate)55 mm thick and finishing surface even and smooth with using extra cement. |
| 26 | Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones. |
| 27 | S/F 3 mm sheet glass ordinary quality , glazing with oil puttyin Sq.N. exc. 0.5 sqm in each pane. |
| 28 | Cutting holes in brick walls in cement mortarexcHalf Brick but n exc. One brickfor inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required. |
| 29 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in Hard/dense Soil. |
| 30 | M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 100 mm thickness M-50 Grade with Grey Cement and Pigment. |
| 31 | Screed bed or bedding layer of mortar 20 mm thick for laying floor finishes. |
| 32 | S&F Chequered cement concrete tiles 20cm x 20cm x 25mm thick,set, jointed and pointed in neat cement slurry in floors with grey pigment cement and pigments. |
| 33 | S&F 110mm bore dia PVC (SWR) pipes single socketed inany length withrubber ring joints fixed to walls. |
| 34 | S & F PVC( SWR) Bends any radius 110mm bore. |
| 35 | S/F PVC (SWR) couplers110 mm bore. |
| 36 | S&F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, includingbolts and nuts and securing ends of stays towall or roof. |
| 37 | Excavating in trenches n exe. 1.5 m wide n. exe 1.5 m deep. |
| 38 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point. |
| 39 | Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4. |
| 40 | M&L Rendering 15mm thick cement plaster 1:4 on fair faces of brick work or concrete surfaces of wall, after brushing neat cement slurry with 3.0kg of cement per sqm , finished even and smooth (without using extra cement) Cement Make: Ultratech/Ambuja/ACC/Birla only acceptable. |
| 41 | M&L Broken bricks Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface. |
| 42 | M/L Brushing neat cement slurry & 70 mm thick Cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate) and finished even and smooth with extra cement.Cement Make: Ultratech/Ambuja/ACC/Birla only acceptable. |
| 43 | Cutting hole in brick wall built in cement mortar exc 150 sqcm but n exc 400 sqcm and making good dismantelled portion with cement mortar 1:3 or Cement concrete 1:2:4, type B-1 as required. |
| 44 | Removing building material at a distance5.00 Km and above. |
| 45 | Buy Back of Asbestos |
| 46 | Credit of old Asbestos cementsheets. |
AI Tender Summary
Tender Timeline
May 29, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedJun 04, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 05, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender