|
| 1 | Taking down chowkhats or frames n.exc 1.50 sqm with shutters (without taking off shutters from the frames) all as specified and directed. |
| 2 | Taking down chowkhats of frames exc 1.50 sqm but n. exc 4.0 sqm with shutters (without taking off shutters from the frames) all as specified and directed. |
| 3 | Taking down door shutters of any description exc 1 Sqm & n.exc 2 Sqm each complete all as specified and directed |
| 4 | Demolition of reinforced cement concrete (Reinforcement cut as required to facilatate demolition)of any description and in any position not otherwise specially provided |
| 5 | Demolition of plain cement concrete (unreinforced) of any thickness of any description and in any position not specifically provided for complete all as specified and directed. |
| 6 | M&L for non skid ceramic coloured tiles 7 to 8mm thick joint free area of each tile exceeding 0.11 sqmbut not exceeding 0.18 sqmas in floors over 15mm thick screed bedor bedding layer in cement mortar 1:6 set and jointedin neat cement slurry and pointed in coloured cement including dismantling floor, hearth or wall tiling including cement mortar bedding and also backing plaster, removing serviceable tiles to store and rubbish off the premisesall as specified and directed. |
| 7 | All as the description of srl item No 06 above but in vertical surface as in skirting, dado and risers to steps over and including10mm thickrendering/backing coat in cement mortar 1:4 etc. |
| 8 | M&L for non skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.06 sqmbut not exceeding 0.11 sqmas in floors over 15mm thick screed bed or bedding layer in cement mortar 1:6 set and jointedin neat cement slurry and pointed in coloured cement. including dismantling floor, hearth or wall tiling including cement mortar bedding and also backing plaster, removing serviceable tiles to store and rubbish off the premises all as specified and directed. |
| 9 | M&L glazed ceramic coloured tiles in vertical surface 450 x 350 x 7mm or 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10mm thick in CM 1:4 and finished rough, complete including dismantling floor, hearth or wall tiling including cement mortar bedding and also backing plaster, removing serviceable tiles to store and rubbish off the premises complete allas specified and directed. |
| 10 | M&L 3D exterior designer coloured matt finished wall tiles 300mm x 600mm design as approved over 10mm thick rough finishedrendering in cement mortar 1:4 including taking down tiles and also backing plaster or existing treatment, exposed brick surface and removal of debries from sitecomplete allas specified and directed. |
| 11 | M&L for 75mm thick 1:4:8 type-D-2(using 40mm graded crushed stone aggregate) as in sub base to receive stone slab and pavement all as specified and directed. |
| 12 | M&L 20 to 25mm thick pre-polished machine cut Kota stone slab as in flooring over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, laid over cement slurry @ 3 Kg/Sqm and jointed with grey cement slurry mixed with pigment to match with shade of slab including moulding the edge of slabcomplete all as specified and directed. Note:- The size of Kota stone slab shall not less than 550mm x 550mm cut size in flooring and full length single piece in steps, except the location where the balance portion remain less than size as specified above. |
| 13 | M&L 20 to 25mm thick pre-polished machine cut Kota stone slab as in riser or vertical surface over and including 10mm thick rendering in cement mortar 1:4, and jointed with grey cement slurry mixed with pigment to match with shade of slab including moulding the edge where as specified and directed. Note:- The size of Kota stone slab shall not less than 550mm x 550mm cut size as in flooring and full length single piece in steps, except the location where the balance portion remain less than size as specified above. |
| 14 | M&L for machine cut makrana green/white marble18-20mm thick in flooring as in border in any pattern including dismantling of slab over 15mm cement screed bed or bedding layer in cement mortar 1:6 jointed and pointed with white cement slurry including mirror polishing/diamond polishing using carborandum stone of 0 unit including rubbing & treating the surface complete all as specified and directed |
| 15 | M&L for reinforced cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate in chajjascomplete allas specified and directed. Note:- Reinforcement isto be measured and paid separately. |
| 16 | M&L reinforced cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate in Slabs supported on walls,beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the likecomplete allas specified and directed. Note:- Reinforcement isto be measured and paid separately. |
| 17 | Mild steel TMT bars 6 to 8mm dia as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete allas specified and directed. |
| 18 | Formwork to sides and soffits of slabs n. exc. 200mm thick and similar works rough finished surfaces of concrete complete allas specified and directed. |
| 19 | Use and waste of formwork to chullah hoods, chajjas, throughs and similar items including edges complete allas specified and directed. |
| 20 | M&L brickwork with subclass \"B\" brick straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete including demolition of the the brick work at any positioncomplete allas specified and directed. |
| 21 | Taking down existing cementplaster or complete removal of existing pointing and finishes including racking out joints, hacking for key, scrubbing down with water etccomplete all asspecified and directed. |
| 22 | M&L 15mm thick rendering in cement mortar 1:4 on faces of brick work or concrete external surfaces of wall mixed with liquid water proofing compound finished even and smooth without using extra cement all as specified and directed.Note:- The WPC shall be measured and paid separately. |
| 23 | M&L 15mm thick rendering in cement mortar 1:6 on faces of brick work or concrete internal surfaces of wall finished even and smooth without using extra cement complete allas specified and directed. |
| 24 | M&L 5mm thick rendering in cement mortar 1:3 on concrete surfaces in ceiling, finished fair & even and smooth complete allas specified and directed. |
| 25 | M&L for preparing new plastered or unplastered surfaces of ceiling and applying three coats of white wash complete allas specified and directed. |
| 26 | M&L for preparing old decorated plastered surfaces of ceiling and applyingtwo coats of white wash complete allas specified and directed. |
| 27 | M&L for preparing new plastered surfaces of wall and applying two coats of oil bound distemper white or tinted over and including a coat of 2mm wall care putty and chalk whitingon plastered surfaces preparatory to distempering complete allas specified and directed. |
| 28 | M&L for complete removal of existing treatment and preparing old decorated surfaces of wall and applying two coats ofoil bound distemper over a coat of 1mm wall care putty complete allas specified and directed. |
| 29 | M&L for preparation of new plastered surfaces of wall and applying two coats of cement based paint over a coat of cement primer complete allas specified and directed. |
| 30 | M&L for complete removal of existing treatment of wall including cornices etc. by washing, rubbing down and stopping holes, and applying two coats of cement base paint over one coat of primer of approved shade complete all as specified and directed. |
| 31 | Dismantling wrought iron or mild steel work of any description not other wise provided all as specified and directed |
| 32 | S&F for steel gate made of MS section, grill work including holdfast, 2x pintels hinges, stoppers, bushes, and all as CI decorative pieces, locking arrangement etc completeall as specified and directed. |
| 33 | S&F steel water tubes, medium grade, ISI marked, galvanised, 15mm bore with all fittings, fixed to walls and ceiling or laid in floors including taking up or down steel tubing and connections, including cleaning fo re-fixing or removal to store complete allas specified and directed. |
| 34 | S&F steel water tubes, medium grade, ISI marked, galvanised, 20mm bore with all fittings, fixed to walls and ceiling or laid in floorsincluding taking up or down steel tubing and connections, including cleaning fo re-fixing or removal to store complete allas specified and directed. |
| 35 | All as per the description of srl item No 33 above but except GI tubing |
| 36 | All as per the description of srl item No 34 above but except GI tubing |
| 37 | S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 500 litres capacity, ISI marked, double alyered hoisted and fixed in position including connecting up pipes including dismantling of PVC water tanks complete allas specified and directed. |
| 38 | S&F in repairs 20mm gun-metal, globe or gate valves,with iron wheel head, screwed both ends for ironpipe and fixedcomplete allas specified and directed. |
| 39 | S&F ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic wall, screwed for iron pipe and fixed for 20mm bore size (Minimum weight 210gms), complete allas specified and directed. |
| 40 | Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, shelves, lintels, etc, and cutting chases for concealed water tubings, etc and making good, cutting not exceeding 10cm girth complete allas specified and directed. |
| 41 | S&FPVC (SWR) pipes single socketed in any lengthwith rubber ring joints fixed to walls or in floor 75mm bore including demolition/taking down PVC/ drain/Rain water pipe complete allas specified and directed. |
| 42 | S&FPVC (SWR) pipes single socketed in any lengthwith rubber ring joints fixed to walls 110mm boreincluding demolition/taking down PVC/ drain/Rain water pipe complete allas specified and directed. |
| 43 | S&F PVC (SWR) bends any radius, 75mm bore, complete allas specified and directed. |
| 44 | S&F PVC (SWR) bends with access door any radius, 75mm bore, complete allas specified and directed. |
| 45 | S&F PVC (SWR) bends any radius, 110mm bore, complete allas specified and directed. |
| 46 | S&F PVC (SWR) bends with access door any radius, 110mm bore, complete allas specified and directed. |
| 47 | S&F PVC (SWR) vent cowl, 75mm bore complete allas specified and directed. |
| 48 | S&F in repairs stainless steel plate rack (utensil rack) of size (600mm x 750mm) and depth 300mm made with 0.55mm thick stainless steel sheet provided with brass screw including necessary fittings, nut/bolts complete allas specified and directed. |
| 49 | S&F in repairs 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete allas specified and directed. |
| 50 | S&Fin repairs soap dish disc (oval) type, mild steel chromium plated of approximate size 100 x 50 x 10mm,complete allas specified and directed. |
| 51 | S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass self 12cm wide with chromium plated bracket guard and railing 60cm long complete allas specified and directed. |
| 52 | S&F in repairs 75mmPVC (SWR) floor trap, plain with grating including jointing with solvent cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate mix with WPC complete all as specified and directed. |
| 53 | S&F in repairs stainless steel sink with drainage board, made out of 1.00mm thick sheet with plug, washers, waste pipe, cast iron cantilever brackets, connecting union over all size 915mm x 460mm with bowl size 410mm x 330mm x 160mm complete allas specified and directed. |
| 54 | S&F in repairs tubular towel rail of brass chromium plated, 20mm dia, \"D\" type, 60cm long between flanges complete allas specified and directed. |
| 55 | S&F in repairs stop valves, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup (concealed type) screwed both ends for iron pipe or for unions 15mm bore complete allas specified and directed. |
| 56 | S&F in repairs bib taps cast copper alloy chromium plated with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferrule 15mm borecomplete allas specified and directed. |
| 57 | S&F in repairs brass CP mixer for mixing hot & cold water screwed down high pressure, with long screwed shanks and fly nuts, screwed for iron pipe 15mm bore for WHB complete allas specified and directed. |
| 58 | S&F in repairs brass chromium plated shower rose 65 to 90mm size with swivel joints,wall flange complete allas specified and directed. |
| 59 | S&F in repairs 10 litre capacity PVC low level flushing cistern ‘ white’ with inlet, float valve including bracket with 32mm dia PVC waste/flush bend pipe appx 600mm long complete allas specified and directed. |
| 60 | S&F in repairs PVC connection 600mm long and15mm dia with brass fly nut at both ends complete allas specified and directed. |
| 61 | S&F in repairs vitreous china squatting pan, ‘Orissa’ pattern, of size 580mm x 440mm white with integral foot rest, P or S trap complete including provn of cement concrete bedding, outgoing flushing pipe, anti syphonage pipe etc complete allas specified and directed. |
| 62 | S&F vitreous china wash hand basin white, flat back of size 550mm x 400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32mm dia PVC waste pipe including fixing of tap, waste fitting etc complete allas specified and directed. |
| 63 | S&F 32mm dia bore Low density polyethylene pipes (LDPE)of pressure rating 6kgf/cm2 fixed complete to walls,ceilings or in floors etc for WHB and sink complete allas specified and directed. |
| 64 | S&F in repairs chromium plated brass angle valve concealled type for15mm bore pipe, fixed in repairs complete all as specified and directed. |
| 65 | S&F solid PVC doorframe of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, suppling & fixing in oening as per specification & drawing. |
| 66 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for tip & bottom rails, M.S frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M S frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together wit solvent cement, supplilng & fixing in the frame at site as per specification & drawing. |
| 67 | S&F 30mm thick second class hardwood glazed and skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebeated sash bars, anynumbers,beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) and as directed. |
| 68 | S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay,complete with glazing bars, dovetailed or welded complete allas specified and directed. |
| 69 | All as per the description of srl item No 68 above but without glazing bars |
| 70 | S&F sheet glass ordinary quality, 4mm thick and glazing with oil putty in square n.exc. 0.5 Sqm in each pane complete all as specified and directed. |
| 71 | S&F in repairs sheet glass ordinary quality, 4mm thick and glazing with oil putty or wooden beading to window in square n.exc. 0.5 Sqm in each pane complete all as specified and directed. |
| 72 | S&F stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm, fixed with stainless steel wire staples, wooden beads, tinned tacksto steel windows and wooden doors shutterscomplete allas specified and directed. |
| 73 | S&F in repairs stainless steel, wire cloth 0.56mm nominal dia of wire, and average width of aperature 1.18m and fixed to steel or wooden window or doors with wooden beading or oil putty and all necessary fixing arrangement complete all as specified. |
| 74 | S&F flush shutters 30mm thick, solid core construction, with block board core and ply wood face panels, commercial type on both sides with leaping and beading complete allas specified and directed. |
| 75 | Mild steel conforming to Fe 410-0 or Fe 310-0 in framed work such as grills, gratings, door frameetc with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; ladders; railings and similar work complete allas specified and directed. |
| 76 | S&F mild steel, plain, black sheetof 1.60mm thick in wall cladding steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up mitred angles etc as required complete allas specified and directed. |
| 77 | Rolled mild steel sections conforming to Gde Fe-410-0 or Fe-310-0 as in cooler stand similar work complete allas specified and directed. |
| 78 | Taking down/dismantling old particle board or any board kitchen cabinet with wardrobe including fillets and making good disturbed surfaces all assessary complete all as specified. |
| 79 | S&F 18/19mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & otherside balancing white lamination, fixed with screws to timber frame work as in cupboard, kitchen cabinet etc all as specified and directed |
| 80 | Extra over rates of width 18/19mm of block board or veneered particle board for external teak wood lipping, 6mm thick fixed with nails complete allas specified and directed. |
| 81 | S&F 2nd class hard wood plain fillets square, rectangular or triangular in section of size exc 13 and n exc 25 Sqcm , wrought, secured with nails or brads to wall, column etc complete allas specified and directed. |
| 82 | S&F magnetic catches with steel body ‘H’ type, fixed to shutter complete allas specified and directed. |
| 83 | S&F continuous (piano) hinges of width 30mm when open flap) , mild steel, bright finish or electrogalvanised complete allas specified and directed. |
| 84 | S&F floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed to floor of size 140mm complete allas specified and directed. |
| 85 | S&F100mm long aluminium anodised barrel tower bolts of extruded section and fixed complete allas specified and directed. |
| 86 | S&F4 levers brass cupboard locks grade-I, size 65mm complete allas specified and directed. |
| 87 | S&F150mm long aluminium anodised barrel tower bolts of extruded section and fixed complete allas specified and directed. |
| 88 | S&F200mm long aluminium anodised barrel tower bolts of extruded section and fixed complete allas specified and directed. |
| 89 | S&F butt hinges, 100mm size medium weight, cold rolled mild steel complete allas specified and directed. |
| 90 | S&F aluminium handles 150mm size cast type, anodised complete allas specified and directed. |
| 91 | S&F 300mm aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete allas specified and directed. |
| 92 | S&F stainless steel cromium plated tubing of 25mm dia curtain rod fancy type including fancy type CP brabs brackets (wall to wall or flush to wall) with finials or end caps decorative type as approved by GE for securing to curtain rod to wall in position, fixed in repair complete allas specified and directed. |
| 93 | M&L applying two coats of synthetic enamel paint on newwooden surfaces of any description over 10cm width or girth over a coat of pink primer including preparation of surfaces complete allas specified and directed. |
| 94 | M&L applying two coats of synthetic enamel paint on new steel surfaces of any description over 10cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete allas specified and directed. |
| 95 | M&L for two coats of synthetic enamel paint on old steel painted surfaces including preparation of surfaces of any description not otherwise described over 10cm width or girthcomplete all as specified and directed. |
| 96 | M&L for two coats of synthetic enamel paint on old wooden painted surfaces including preparation of surfaces of any description not otherwise described over 10cm width or girthcomplete all as specified and directed. |
| 97 | Removing of existing water proofing membrane, damage plaster, vegitation/plants, PCC, Tar-felt,brick tile, mudfuska, loose particles and all foreign materials over the roof and shifting the debris from out-side of MoD area as directed. |
| 98 | Cleaning the surface & removing of dust, existing paints from wall & roof surface, finding visible crack Making V - groove by machine on crack area, providing & applying polymer bonding agent 1:2 & filling those grooves by modified cement & sand mortar 1:4 with WPM liquid(5% by wt. of cement). Waterproofing coating-Providing & applying 1st coatWPM with brush/roller after mixing with cement at 1:1.5 (1 part of WPM and 1.5 part of cement & 2nd coat with an interval of 10 to 12 hrs by brush or roller to get average thickness of 1.5mm.The system will be allowed to air cure for 7 days covering including parapet both side wall complete allas specified and directed. |
| 99 | M&L for plain cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in string courses copings or as floors. |
| 100 | M&L for preparation of new or old plastered surfaces of wall and applying two or more coat of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489; 2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm over new surface complete allas specified and directed. |
| 101 | S&F in repairsfor gypsum ceiling board for ceilingprepainted, perforated finish, 600 x 600 x 9 to 9.5mm thick in size, of approved brand/make, laid over and including grid work of size 600 x 600mm, made out of 0.5mm thick G.I. tee 32 x 24mm for main, 25 x 24mm for cross tee and 20 x 20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle. hung from ceiling using 2mm thick G.I. suspension wires spaced at 1200mm on main runners including making niches for fans/light at as specified and directed. |
| 102 | Removal/dismantling of existing textile coverings including frames (if any) and cover fillets (measured flat and not girthed) complete allas specified and directed. |
| 103 | M&L for roof tiles mangalore pattern any size and shape, interlocking at side joints, laid dry complete allas specified and directed. |
| 104 | M&L for 15mm thick Cement plaster on surfaces of concrete in CM 1:4 on roof surfaces mixed with WPC @ 200 ml @ 50 Kg of cementcomplete all as specified and dierected. Note:- The WPC shall be measured and paid separately |
| 105 | Supply only liquid water proofing compound |
| 106 | M&L for 40mm thick plain cementconcrete1:2:4 type B-1, (20mm graded crushed stone aggregate) as in floors and finishing cementconcrete surface even and smooth with using extra cement complete allas specified and directed. |
| 107 | M&L for plain cement concrete M-10, nominal mix, type C-1, using 20mm graded mechanically crushed stone aggregate, 75mmthick as in plinth protection etc., surface finished even and smooth without using extra cement and laid to a slope of 1 in 24 in alternate panels n.exc. 1.20 Sqm each, 12mm wide and 5 cms deep joints shall be formed between the bays and shall be filled with mastic filling comprising a mixture of one part of heated blown bitumen VG-10 and two parts of heated coarse sand (by volume), all as specified & directed. Note:- The unit rate include for use of form work (straight or curved). |
