Tender For Civil Maintenance & repair Work Of Office Building Of Ee Edd2 Sdo Eusdd 6 Ee Eudd I Office Building District Gorakhpur, 1 Excavation in foundation in ordinary soil (Loam Clay or Sand) including lift upto 1.5m and lead upto 30m and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of the foundation work. (CSI No. 4.01) 2 River Bed Fine Sand filling in plinth including supply of necessary quantity of fine sand from outside the UPPCL premises including watering, dressing etc. Rate to include cost of all materials, labour and T&P etc. required for proper completion of work.(CSI No. 4.05) 3 Concrete with 4cm gauge I class brickballast, coarse sand and cement in proportion of 12:6:1 in foundations and under floors including supply of all materials, labour and tools and plants etc. required for proper completion. (CSI No.5.01 ) 4 Cement concrete with 2cm gauge approved hard stone ballast,coarse sand and cement in proportion of 4:2:1including supply of all materials, labour,side shuttering ifrequired and T&P etc. required for proper completion of work. (CSI No. 5.06) 5 RCC work with cement, approved coarse sand and2 cm gauge graded approved hard stone ballast like granite, quartzite etc from Dalla, Jhansi or other quarries in proportion 1:1.5:3inslab, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P (CSI No. 5.24) 6 RCC work with cement, approved coarse sand and2 cm gauge graded approved hard stone ballast like granite, quartzite etc from Dalla, Jhansi or other quarries in proportion 1:1.5:3in lintels of doors and windows, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P. . (CSI No. 5.23) 7 1st Class brickwork in 1:6 cement and coarse sand . mortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work. (C.S.I. No.6.01) 8 Same as in item no. 3above B.W. in 1:6 in super structures but for wall one brick (230mm) thick (C.S.I. No. 6.01+6.07+6.08) 9 Same as in item no. 3above B.W. in 1:4 in super structures but for wallbrick (230mm) thick (C.S.I. No. 6.03+6.07+6.09) 10 First class brick laid dry in foundation and plinth as incircular soakpit walls of one brick thickness and 2.0 to 3.0M depthincluding cutting moulding bricks as required including cost ofall materials labour and T&P complete. (CSI No. 6.16) 11 Supply and filling brick bat in soak pit including all labour,material and T&P etc complete. (for 01 soak pit) (CSI No. 6.23) 12 Supply and fixing of 32 mm thick single leaf flush door shutter ( boiled water resistance, phenol maldehide resin bonded, hot pressed factory made) commercial quality to I.S.2202 part-1 (1983) ISI marked including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges,bolts.locks,handles, springs and other fittings but including their supply including all materials,labour & T&P etc. required for proper completion of work. (CSI No. 8.54+8.58) 13 Mild Steel or Iron work in heavy sizes such as trusses built upgates, door frames, record, racks roof work gates etc. wrought torequired form including holes rivetting or welding where necessary and also fixing in proper position and alignment including cost of all materials supplied by contractor. (CSI No. 9.01) 14 TMT/Tor steel in plain work such as reinforced concrete orreinforced brick work (when not included in an over all rates)wrought to required shape as necessary including bending forproper completion of the work and including supply of steel its wastage, bend, hooks and authorized overlapping shall be measured. (Steel shall be arranged by the contractor) (CSI No. 9.03) 15 Providing and fixing steel glazed window and ventilators ofstandard rolled Mann or Mahavir steel sections conforming to IS7452-1974 as per drawing joints metered & welded with 100x14x3.15 mm holdfast embedded in cement concrete block 15x10x10 cm. Size of 1:3:6 proportion i.e. 1 part of cement 3 part of approved coarse sand & 6 part of graded stone (aggregated 20mm. Nominal size) S/F of glass panes of plain pin headed 4mm. Thick nuts glazing clips and special putty of approved make complete and including a cost of red oxide paint. The fabrication should conform to I.S.1038-1975. (Aluminum beading with rubber packing included). (CSI No. 9.17) 16 Supply and fixing galvanised mosquito proof jali (16x24 gauge) withM.S. flat of 20 x 3 mm. size, on both sides screwed or welded to windowor door frame. (CSI No. 9.18) 17 Supplying & fixing 24 gauge annodized aluminium sheet of approved quality including cutting, wastage and fixing the same over the wooden door shutters with nails with all material, labour and T&P. (CSI No. 8.60) 18 S/F Galvanized Mosquitos proof heavy quality iron wire gauge (14x24) over window frames and including supply of COUNTRY wood battens 8cm x 1cm. and including supply and fixing of necessary screws, all materials,labour andT&P etc. required for proper complete. (CSI No. 8.45) 19 12 mm thick plaster with cement mortar consisting of one part of cement & three part of coarse sand (1:3), minimum thickness not to be less then 10 mm including supply of all materiallabour and T&P etc for proper completion of work.(CSI No. 11.06) 20 12 mm thick plaster with cement mortar consisting of one part of cement & four part of coarse sand (1:4), minimum thickness not to be less then 10 mm including supply of all material, labour and T&P etc for proper completion of work. (CSI No. 11.07) 21 12 mm thick plaster with cement mortar consisting of one part of cement & six part of coarse sand(1:6),minimum thickness not to be less then 10 mm including supply of all material, labour and T&P etc for proper completion of work.(CSI No. 11.09) 22 Add for extra labour and materials for plaster over rough face ofone brick thick wall. (CSI No. 11.12) 23 S/mixing approved water proofing compound (CICO,DR FIXIT etc) in cementmortar in plaster or concrete work in the proportion as recommended by the manufacturer. (CSI No. 11.15) 24 Making drip coarse (25x12) mm in 1:2 cement and coarse sandincluding supply of all materials, labour and T&P etc requiredfor proper completion of work.(CSI No. 11.19) 25 3 mm thick floating coat of neat cement finish including supply of all materials,labour and T&P etc. required for proper completion of the work.( cement consumption 0.044 bag/Sq.m.) (CSI No. 11.20) 26 4.0 cm thick 1:2:4 plain cement concrete floor with cement, approved coarse sand & 2cm graded approved stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 as specifiedand including 7.5 cm thick base concrete consisting of cement, coarse sand and 4cm gauge I class brick ballast in the proportion of 1:6:12 and removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish including supply of all materials, labour and T&P etc, required for proper completion of the work.(CSI No. 12.03) 27 4.0 cm thick 1:2:4 plain cement concrete floor with cement, approved coarse sand & 2cm graded approved stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified and removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish including supply of all materials, labour and T&P etc, required for proper completion of the work. without base CC (CSI No. 12.04) 28 Supply and Laying 8 mm thickglazed floor tiles of Somany, Johnson or equivalent make, , laid with1:3 cement and approved coarse sand mortar finished with whitecement slurry, jointing and polishing complete, including supplyof all materials, labour and T&P etc. required for proper completion of the work.(CSI No. 12.11) 29 Supply and Laying 6 mm thickglazed tiles in skirting / dado laid with1:3 cement and approved coarse sand mortar finished with whitecement slurry, jointing and polishing complete,including supplyof all materials, labour and T&P etc. completion required for proper completion of the work.(CSI No. 12.12) 30 Providing and fixing glass strips of 3.15 mm thickness & 40mm depth in jointsof floor and skirting at the time of laying floors, flush withfloor level including supply of all materials, labour& T&P etc. required for proper completion of work. (CSI No. 12.14) 31 Providing and laying floor of 8 mm thick vitrifiedtiles in flooring or skirting of approved brand (Bell, Johnson or equi. make)size of 600x600 mmof approved shade, colour and pattern , laid over base cement mortar 1:4 mix including finishing the joints with white cementmixed with pigment to match the shade of tile including cost of all material, labour and T&P required for proper completion of the work. (CSI No. 12.18) 32 providing and fixingfloor of 8 mm thick vitrifiedtiles in flooring or skirting of approved brand (Bell, Johnson or equi. make)size of 600x600 mm with adhesive of approved quality on existing smooth floor including cost of all material, labour and T&P required for proper completion of the work. (CSI No. 12.19) 33 Providing and laying of 16 mm thick granite ( black/ brown) inflooring or skirting ,of approved shade, colour,size and pattern , laid over base cement mortar 1:4 mix including finishing the joints with white cementmixed with pigment to match the shade of granite floor including cost of all material, labour and T&P required for proper completion of the work, as per direction of Engineer incharge. (CSI No.12.20) 34 Supply and laying of 80 mm thick I shaped mechanically compressed rubber mould inter locking cement concrete paver block manufactured by high pressure & controlled vibration machine having plan dimension 200X(160+120 mm) with minimum 5 mm thick toping of O.P.Cement mixed with 25% marble powder. The compressive strength of concrete pavers blocks shall not be less than 30 MPa & 4.5 Kg/No. including cost of all material, labour, T&P etc. required for proper completion of work as directed by Engineer-in-charge but excluding G.S.T. which shall be paid extra as per rules. (CSI No.12.24) 35 Painting or varnishing on previously paintedold wood or iron work including its sand papering,rubbing andcleaning as required including supply of all materials, labour and T&P etc. required for proper completion of the work. Paint to be used should conform to the I.S. 103-1950. (CSI No. 13.02+13.03) 36 Painting or varnishing new iron work two coat in small areas or new woodwork with one coat of ready mixed priming paint and one coat ofapproved superior quality ready mix paint Luxol or equivalentbrand or varnish including supply of all materials, labour and T&P etc. required for proper completion of the work. Paint to be used should conform to the I.S. 103-1950.(CSI No. 13.01+13.02) 37 Applying Birla or equivalent putty on old surface interior or exterior surface over one coat of water based cement primer of ICI or equivalent brand for smoothening and levelling of the surface as per requirement and direction of Engineer I/C including cost of all material, labour, T & P etc required for proper completion of work. (CSI No. 13.21) 38 Painting one coat with APEX or equivalent brand weather coat paint onpreviousely treated surfaces (well prepared with Birla putty and one coat of primer ICI or equivalent which shall be paid separately) including through washing with water including cost of all materials, labour, T&P required for proper completion of work. (CSI No. 13.23+13.24) 39 Painting two coat with Acrylic emulsion paint of Berger/ Asian/ ICI or equivalent paint (Paint and water in the ratio 1:1 by volume) over prepared and primed surface of cement concrete, cement plaster and bricks including all labour, material and T&P etc required for proper completion of the work, (preparation of base with Birla putty etc. and a coating of primer shall be paid extra) . (CSI No. 13.25+13.26) 40 Dismantling existing plaster including disposal of refuse asdirected by the Engineer-I/C within a distance of 60 M. (CSI No. 15.11) 41 Dismantling brick work or stone work in lime or cement mortar andincluding stacking of materials as directed by theEngineer-in-charge within a distance of 60 metres.(CSI No. 15.01) 42 Dismantling reinforced cement concrete or reinforced brick work,including stacking of dismantled materials as directed by theEngineer-Incharge within a distance of 60 metres. (CSI No. 15.03) 43 Dismantling cement concrete or brick or granolithic floorsincluding base concrete and including stacking of dismantledmaterials as directed by the Engineer In-charge within a distanceof 60 metres. (CSI No. 15.05) 44 Dismantling doors or window leaves including stacking ofmaterials as directed by the Engineer I/C within a dist. 60 M. (CSI No. 15.09) 45 Dismantaling doors and windowschowkhatsincluding stacking of materials as directed by Engg-in-Charge within a distance of 60 meters. (CSI No. 15.10) 46 Scrapping old white or colour wash or distemper including disposal of refuseas directed by the Engineer-I/C within a distance of 60 M. (CSI No. 15.12) 47 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever requiredincluding cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) (CSI No. 28.24) 48 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever requiredincluding cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Polyester Powder coated aluminium (minimum thickness of powder coating 50 micron)(CSI No. 28.25) 49 Providing and fixingACP in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With ACPof 4.0 mm thickness (CSI No. 28.31) 50 Supply and replacing of L drops 16 mm dia x 300 long oxidized iron fittings including cost of nuts, bolts etc.complete.( CSI NO. 20.17a ) 51 Supply and replacing of Tower bolts 10 mm dia x 250 mm longoxidized iron fittings including cost of nuts,bolts etc.complete. ( CSI NO. 20.17b ) 52 Renewing panes of glass including supply of glass with putty and brads including supply of all materials, labour and t&P etc. required for proper completion of the work.(a) glass of 4 mm thick. (CSI No. 20.04) 806b 53 Providing and fixing white glazed China earthen ware water closet squatting Orisa type pan weaper size 580mmx140mm Hindustan Make or other equivalent approved make of Ist quality with out 100mm dia. White glazed P or S trap fittings including cutting & making good the walls and floors wherever required with cement sand and grit mortar not less than 1:4 the seat and trap shall have to be fixed over minimum 3 thick c.c. in proportion of 12:6:1 including cost of all materials, labour(C.S.I.No. 27.01) 54 Providing and fixing first quality white glazed European type pattern W.C.Pan Hindustan, Cera make. size 580 mm.(Hindustan,Cera Make) with out P trap WITH plastic seat coverincluding supply of all materials,labour and T&P etc.complete. (CSI No. 27.02+27.04) 55 Providing and fixing 10 litres low level PVC flushing cistern, COMPLETE WITH ALL FITTINGS including supply of all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 27.12) 56 Providing and fixing in position 32 mm. dia P.V.C. flush pipe. for W.C. with unions, bends etc. including supply of all materials,labour and T&P etc.required for proper completion of the work. (CSI No. 27.13) 57 Providing and fixing in position 32 mm. dia P.V.C.WASTE PIPE FOR WASH BASIN. including supply of all materials,labour and T&P etc.required for proper completion of the work. (CSI No. 27.14) 58 Providing and fixing 600 mm x 450 mm beveled edge mirror of Atul,Kiran makeglass with Indian polish 6.50 mm thick complete with back of 600 mm x 450 mm x 6 mm hard board sheet fixed to wooden cieats with C.P. brass screws and washers including supply of all materials, labour and T&P etc.required for proper completion of the work. (CSI No. 27.15) 59 Providing and fixing 750 mm x 20 mm size C.P. brass towel rail of approved qualityincluding bracketsincluding supply of all materials,labour and T&P etc. required for proper completion of the work and cutting and making good the wall plaster etc. required for work. (CSI No. 27.16) 60 Providing and fixing soap dish chromium plated with brackets fixed to wooden cleats with brass screws including supply of all materials,labour and T&P etc.required for proper completion of the work. (CSI No. 27.19) 61 Providing and fixing 100 mm dia PVC P or S trap including cement concrete and all materials, labour cartage T&P etc.required for proper completion of the work.(For W.C.) (CSI No. 27.24) 62 Providing and fixing of 110 mm dia PVC pipe 6 Kg/ Sq.cm forwith special such as Tee, bend, socket, elbow etc including supply of all labour,material,T & P etc complete required for proper completion of work. (CSI No. 26.17) 63 Providing & fixing half turn 25mm dia gate valve, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.05c) 64 Providing and fixing PVC BALL FLOAT VALVE 20 mm dia. WITH BRASS & UNION COMPLETE, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.06b) 65 Providing and fixing PVC CONNECTION PIPE, 300x15 with 2 brass uints ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work.(CSI No.26.09a) 66 Providing and fixing PVC Connection pipe 450x15mm with 2 Brass Units.ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work.(CSI No. 26.09b) 67 Supply and fixing of Syntex or equivalent make water storage tank including all materials, labours T&P etc required for proper completion of work. (CSI No. 26.12) 68 P/F of CP BRASS BIB COCK 15 mm dia HEAVY QUALITY (400gm) (L&K and equil.) fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.16a) 69 P/F CP BRASS STOP COCK 15mm dia HEAVY QUALITY (400gm) ( L&K and equi.) (CSI No. 26.16C) 70 P/F of CP BRASS SHOWER HEAVY QUALITY (>225 gms) (L&K and equil.) fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.16E) 71 P/F of CP BRASS wall mixture HEAVY QUALITY (L&K and equil.) fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.16g) 72 P/F of CP BRASS angle valveHEAVY QUALITY (L&K and equil.) fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.16i) 73 P/F of CP BRASS piller cockHEAVY QUALITY (L&K and equil.) fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.16j) 74 Providing and fixing 15 mm dia ISI Approved CPVCpipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete. (CSI No. 26.19) 75 Providing and fixing 20 mm dia ISI Approved CPVCpipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete. (CSI No. 26.20) 76 Providing and fixing 25 mm dia ISI Approved CPVCpipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete. (CSI No. 26.21) 77 Supply and fixing of health faucet for model no-ALD-573 as per direction of engineer in charge. This include cost of labour, materialT&P etc for proper completion of work.(CSI No. 26.30) 78 Wiring Point for light with 1.5sq mm FRLSH PVC insulated multisrand single core copper conductor cable in heavy gauge PVC casing caping on surface complete with 14 SWG copper earth contunuity wire,GP Box, modular type switch & ceiling rose/batten holder on 3mm thick phenolic laminated backlite sheet etc completein all respects, as directed including matching colour wash P.S.I. NO. 121(C)-188(A)+187(A) 79 Wiring point for fan/fresh air fan same as above item P.S.I. No.123(C)-188(B)+187(A) 80 Wiring point forplug same as above item P.S.I. No.124(C)-188(C)+187(C) 81 Supply and fixing of LED tube light batten fitting of approved make suitable for 1x22 watt LED tubelight on surface complete in all respect (P.S.I. No. 1413CAT-AAA) 82 Supplying and fixing 32A-240V IC cutout of approved make (Crompton, Anchor or equivalent) on meter board or polished teak ply board complete in all respect (P.S.I. 1112) 83 S/F ofpower plug with 15 Amp./250 volt flush type switch and 5 pin 15 amp/250 volt flush type modular socketwith 4mm copper conductor on concealed M.S. box with phenolic laminated bakelite sheet cover with supply of all material, labour T&P etc. required for proper completion of work.(P.S.I. No.1139A+211C) 84 S/wiring Sub main with 2 No. 4sq mm FRLSH PVC insulated 1100v grade single multistand single core copper conductor cable in 20mm dia heavy gauage PVC condut concealed with wall including one number 2.5 sqmm FR PVC insulated multistand copper cable as earth contuity wire drawn in conduit. (PSI 216 B)
