|
| 1 | Earthwork in excavation in Hard/dense soil infoundation trenches or drains not exceeding 1.5 m in width and for wells, manholes and the like not exceeding 10 m2 on plan including dressing of sides and ramming of bottoms, lift upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil within a lead of 50 m etc., as required and as directed by the Engineer-in-charge, complete. |
| 2 | Plain cement concrete 1:4:8 nominal mixusing 40 mm graded granite metal of approved quality as coarse aggregate and river sand as fine aggregate including mixing, depositing in position, tamping, finishing, curing etc., as required and as directed by the Engineer-in-charge, complete. All labour and materials. |
| 3 | Plain cement concrete M 30 mixusing 20mm graded granite metal of approved quality as coarse aggregate and river sand as fine aggregate including mixing, depositing in position, tamping or vibrating, finishing, curing etc., including necessary form work (boxing) etc., as requiredand as directed by the Engineer-in-charge, complete. All labour and materials. |
| 4 | Supply of Signage Boards, with Retro-Reflective sheeting (as per ASTMD-4956 Type-XI), pasted on 3mm ACP sheet, fixed to the suitable frame & stand manufactured from heavy duty SS-304 pipe, non-magnetic grade, of 76mm diameter, thickness-3.5mm-two number vertical posts, (curved or straight) suitably (board height as per IRC standards) and SS-304, non-magnetic 50mm dia X 3.5mm thick, for all round frame / spacers for fixing the main frame (housing of the sign board). Which is to be welded to main post. All frames shall be mirror polished/finished and the Aluminum /ACP sheet to be riveted to SS flat 25X3mm & the flat shall be welded to the main frame (SS304-50mm dia). Printing of sign boards, method of fixing of lamination, etc., and shall be as per required technical specifications/standards. |
| 5 | Supply of Signage boards, with Retro-Reflective sheeting (as per ASTMD-4956 Type-XI), pasted on 3mm ACP sheet, fixed to the suitable frame & stand manufactured from heavy duty SS-304 pipe, non-magnetic grade, of 76mm diameter, thickness-3.5mm-one number vertical posts, (curved or straight) suitably (board height as per IRC standards) and SS-304, non-magnetic 50mm diaX3.5mm thick, for all round frame/spacers for fixing the main frame (housing of the sign board). Which is to be welded to main post. All frames shall be mirror polished/finished and the Aluminum / ACP sheet to be riveted to SS flat 25X3mm & the flat shall be welded to the main frame (SS304-50mm dia). Printing of sign boards, method of fixing of lamination, etc., shall be as per required technical specifications/standards. |
| 6 | Painting priming coat to walls and ceiling surface with approved liquid cement primer including cleaning the surface, scraping the surface and washing with soap water , as required and as directed by the Engineer-in-charge,complete etc., All labour and materials |
| 7 | Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces etc., as required and as directed by the Engineer-in-charge,complete. All labour and materials |
| 8 | Transportation of debris/excavated earth up to a lead of 6 km. includingloading, unloadingand levelling materials at the place of unloading etc.,as required and as directed by the Engineer-in-charge complete. |
