Tender For Renovation Of Third Floor Ladies & Gents Toilets In E10-B Telephone Exchange Building At Daccaipatty, Silchar., silchar-Assam

Tender For Renovation Of Third Floor Ladies & Gents Toilets In E10-B Telephone Exchange Building At Daccaipatty, Silchar.; 1 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: 2 (a) Cement mortar 1:6 (1 cement : 6 coarse sand) 3 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : 4 (a) Cement mortar 1:6 (1 cement : 6 coarse sand) 5 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. 6 (a) Cement mortar 1:4 (1 cement :4 coarse sand) 7 Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinalpartitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finishedsmooth. 8 a) Granite Stone of approved shade 9 Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 10 (a) 250x16 mm 11 Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : 12 (a) 200x10 mm 13 Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 14 (a) 100 mm 15 Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer-in-Charge. 16 Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing. 17 (a) 30 mm thick plain PVC door shutters. 18 Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 19 Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. 20 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS : 15622 , of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. a) Glazed Vitrified tiles Matt/Antiskid finish of size 21 a) Size of Tile 600x600 mm 22 Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) bedding in laying of floor tiles and jointing with grey cement slurry @ 3.3 kg/ sqm. 23 Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. 24 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer) with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make in all colours & shade in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete. 25 a) Size of Tile 600x 600 mm 26 15 mm cement plaster on the rough side of single or half brick wall of mix : 27 (a) 1:6 (1 cement: 6 fine sand) 28 6 mm cement plaster of mix : 29 (a) 1:3 (1 cement: 3 fine sand) 30 Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and of required shade and colour complete, to achieve even shade and colour. 31 (a) Old work (One or more coats) 32 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : 33 (a) Two or more coats 34 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge. 35 a) With cement mortar 1:4 (1 cement : 4 fine sand). 36 Providing and fixing glass panes, with putty and nails wherever necessary including racking out the old putty: 37 a) Float glass panes of thickness 4 mm. 38 Providing & fixing White vitreous china water closet squatting pan (Indian type) along with S or P trap including dismantling of old WC seat and S or P trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. 39 a)Orissa pattern W.C Pan of size 580x440 mm 40 Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge. 41 Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge. 42 Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineerin-Charge. 43 (a) Internal Work- Exposed on wall 44 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 45 (a) Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) 46 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. 47 (a) In cement mortar 48 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 49 a) Of area 3 sq. metres and below 50 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. 51 (a) For thickness of tiles 10 mm to 25 mm 52 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. 53 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required : 54 a) W.C. pan with ISI marked white solid plastic seat and lid 55 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 56 a) Range of three urinal basins with 10litre white P.V.C. automatic flushing cistern 57 Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock. 58 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 59 a)Flexible pipe i) 32 mm dia 60 Providing and fixing 100 mm sand cast Iron grating for gully trap. 61 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame with hard board backing (Ready made- Locally available) : 62 a) Rectangular shape 453x357 mm 63 Providing and fixing soil, waste and vent pipes : 64 (a) 100 mm dia (i) Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989. 65 Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes : 66 (a) 100 mm dia pipe 67 Providing and fixing plain bend of required degree. 68 (a) 100 mm dia i) Sand cast iron S&S as per IS : 3989 69 Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 70 (a) 100x100x100 mm i) Sand cast iron S&S as per IS - 3989 71 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge Concealed work, including cutting chases and making good the walls etc. 72 (a) 15 mm nominal dia. 73 (b) 25 mm nominal dia 74 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 75 (a) 25 mm nominal bore 76 Providing and fixing uplasticised PVC connection pipe with brass unions : 77 (a) 45 cm length 15 mm nominal bore 78 Providing and fixing PTMT bib cock of approved quality and colour. 79 (a) 15mm nominal bore, 86 mm long. Weighing not less than 88 gms. 80 Providing and fixing PTMT stop cock of approved quality and colour. 81 (a) 15 mm nominal bore, 86 mm long. Weighing not less than 88 gms. 82 Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. 83 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : 84 (a) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 85 Credit for the old material obtained from dismantling and demolishing as on where is basis.Note: Quantity shown negative as this is a credit to work item. Positive rate quoted by agency shall automatically calculate amount credited to work in lieu of dismantled material to be taken away by contractor. 86 (a) Corroded G.I Pipes, C.I Pipes,Bib Cock,Stop Cock etc. 87 (b)Wooden frames, Shutter Etc 88 Removing,uprooting the grown trees in shaft portions,walls on a height of E-10 B Telephone Exchange building Daccaipattyby making neecssary holes around,uprooting the trees from rootthoroughly,pouring the dilute hydrochloric acid in the root place to arrest its further growth in future and plugging the holes and wall area damaged by touching it up with rich cement mortar etc. all complete as per directions of Engineer-in-charge.

INR 590 /-

INR 9910.0 /-

Refer document

Name of Work:Renovation of Third Floor Ladies & Gents toilets in E10-B Telephone Exchange Building at Daccaipatty, Silchar.

Sl. No.	Item Description
1	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:
2	(a) Cement mortar 1:6 (1 cement : 6 coarse sand)
3	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :
4	(a) Cement mortar 1:6 (1 cement : 6 coarse sand)
5	Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.
6	(a) Cement mortar 1:4 (1 cement :4 coarse sand)
7	Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinalpartitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finishedsmooth.
8	a) Granite Stone of approved shade
9	Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :
10	(a) 250x16 mm
11	Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :
12	(a) 200x10 mm
13	Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :
14	(a) 100 mm
15	Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer-in-Charge.
16	Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing.
17	(a) 30 mm thick plain PVC door shutters.
18	Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
19	Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.
20	Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS : 15622 , of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. a) Glazed Vitrified tiles Matt/Antiskid finish of size
21	a) Size of Tile 600x600 mm
22	Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) bedding in laying of floor tiles and jointing with grey cement slurry @ 3.3 kg/ sqm.
23	Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness.
24	Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer) with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make in all colours & shade in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete.
25	a) Size of Tile 600x 600 mm
26	15 mm cement plaster on the rough side of single or half brick wall of mix :
27	(a) 1:6 (1 cement: 6 fine sand)
28	6 mm cement plaster of mix :
29	(a) 1:3 (1 cement: 3 fine sand)
30	Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and of required shade and colour complete, to achieve even shade and colour.
31	(a) Old work (One or more coats)
32	Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
33	(a) Two or more coats
34	Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge.
35	a) With cement mortar 1:4 (1 cement : 4 fine sand).
36	Providing and fixing glass panes, with putty and nails wherever necessary including racking out the old putty:
37	a) Float glass panes of thickness 4 mm.
38	Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge.
39	a)Orissa pattern W.C Pan of size 580x440 mm
40	Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge.
41	Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge.
42	Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineerin-Charge.
43	(a) Internal Work- Exposed on wall
44	Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.
45	(a) Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
46	Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.
47	(a) In cement mortar
48	Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :
49	a) Of area 3 sq. metres and below
50	Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.
51	(a) For thickness of tiles 10 mm to 25 mm
52	Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
53	Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required :
54	a) W.C. pan with ISI marked white solid plastic seat and lid
55	Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :
56	a) Range of three urinal basins with 10litre white P.V.C. automatic flushing cistern
57	Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock.
58	Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
59	a)Flexible pipe i) 32 mm dia
60	Providing and fixing 100 mm sand cast Iron grating for gully trap.
61	Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame with hard board backing (Ready made- Locally available) :
62	a) Rectangular shape 453x357 mm
63	Providing and fixing soil, waste and vent pipes :
64	(a) 100 mm dia (i) Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989.
65	Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes :
66	(a) 100 mm dia pipe
67	Providing and fixing plain bend of required degree.
68	(a) 100 mm dia i) Sand cast iron S&S as per IS : 3989
69	Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.
70	(a) 100x100x100 mm i) Sand cast iron S&S as per IS - 3989
71	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge Concealed work, including cutting chases and making good the walls etc.
72	(a) 15 mm nominal dia.
73	(b) 25 mm nominal dia
74	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
75	(a) 25 mm nominal bore
76	Providing and fixing uplasticised PVC connection pipe with brass unions :
77	(a) 45 cm length 15 mm nominal bore
78	Providing and fixing PTMT bib cock of approved quality and colour.
79	(a) 15mm nominal bore, 86 mm long. Weighing not less than 88 gms.
80	Providing and fixing PTMT stop cock of approved quality and colour.
81	(a) 15 mm nominal bore, 86 mm long. Weighing not less than 88 gms.
82	Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.
83	Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :
84	(a) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
85	Credit for the old material obtained from dismantling and demolishing as on where is basis. Note: Quantity shown negative as this is a credit to work item. Positive rate quoted by agency shall automatically calculate amount credited to work in lieu of dismantled material to be taken away by contractor.
86	(a) Corroded G.I Pipes, C.I Pipes,Bib Cock,Stop Cock etc.
87	(b)Wooden frames, Shutter Etc
88	Removing,uprooting the grown trees in shaft portions,walls on a height of E-10 B Telephone Exchange building Daccaipattyby making neecssary holes around,uprooting the trees from rootthoroughly,pouring the dilute hydrochloric acid in the root place to arrest its further growth in future and plugging the holes and wall area damaged by touching it up with rich cement mortar etc. all complete as per directions of Engineer-in-charge.