|
| 1 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil |
| 2 | M&L Cement concrete in foundations, filling and mass concrete type C-2 1:3:6(40mm graded aggregate) |
| 3 | M&L for PCC 1:2:4 type B-1 (20mm graded stone aggregate) as in surface channels and drains all as specified and directed. |
| 4 | M&L for walling of random rubble, uncoarsed, well bounded, bedded and solidly hearted, built in CM 1:6 |
| 5 | M&L for providing cement concrete 1:2:4 type B-1 (20mm graded aggregate) as in coping, etc including weathering, slightly rounded or chamfered angles and throating, as directed including necessary formwork with glass complete all as specified and directed |
| 6 | M&L rendering 20mm thick on stone fair surfaces of brick surfaces in CM 1:4 surface finished even and smooth w/o extra cement |
| 7 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm hard/dense soil |
| 8 | Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed |
| 9 | Extra for forming fair finished drain or channel 450cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped end etc |
| 10 | Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses |
| 11 | Demolition of brick work or stone masonary built in cement mortar including all quoins, arches, pillars etc. |
| 12 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified and directed. |
| 13 | Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and directed by Engr-in-Charge. |
| 14 | M&L broken stone or boulders hardcore of gauge n.exc 63mm, deposited, spread and levelled and well rammed in layers n exc. 15 cm thick, watered and rammed to a true surface. |
| 15 | M&L for providing PCC 1:4:8 type D2 (using 40mm graded aggregate) as sub base 75mm thick complete all as specified and directed. |
| 16 | M&L for Readymix Cement concrete work in pavement/ hard-standing of flexural strength 40 kg/per square centimetre (M40) in field using 360 kg of cement per cubic metre, thickness of concrete 25 cm or less |
| 17 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc |
| 18 | M&L Vitrified Coloured Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over screed bed or bedding layer 15mm thick for laying floor finishes in cement mortar 1:6 to recive tiles/stone slabs including skirting with backing coat complete all as specified and directed by EIC. |
| 19 | Non-skid Coloured Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over screed bed or bedding layer 10mm thick for laying floor finishes in cement mortar 1:6 to recive tiles/stone slabs including skirting with backing coat complete all as specified and directed by EIC. |
| 20 | Non-skid Coloured Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over screed bed or bedding layer 10mm thick for laying floor finishes in cement mortar 1:6 to recive tiles/stone slabs complete all as specified and directed by EIC. |
| 21 | Non-skid Coloured Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over screed bed or bedding layer 10mm thick for laying floor finishes in cement mortar 1:6 to recive tiles/stone slabs including skirting with backing coat complete all as specified and directed by EIC. |
| 22 | Glazed ceramic coloured tiles in vertical surface 300x 450x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match (dado) including 10 mm thick back coat of cement plaster on fair faces of brick work 1:3 |
| 23 | S&F uPVC vent cowl 110mm bore with and including rubber ring joints, complete all as specified and directed. |
| 24 | S&F uPVC vent cowl 75 mm bore with and including rubber ring joints, complete all as specified and directed. |
| 25 | S&F in repairs110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls/floors all complete all as specified and directed. |
| 26 | S&F in repairs75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls/floors all complete all as specified and directed. |
| 27 | S&F 110mm bore PVC (SWR) branch piece single (Single Y ) equal or unequal with access door |
| 28 | S&F 110mm bore PVC (SWR) bend with access door |
| 29 | S & F in repairs PVC (SWR) bend 75 mm with access door |
| 30 | S & F in repairs PVC (SWR) bend 75 mm without access door |
| 31 | S & F in repairsPVC (SWR) bend 110 mm with access doors |
| 32 | S & F in repairsPVC (SWR) bend 110 mm withoutaccess doors |
| 33 | S & F in repairsPVC (SWR) branch piece, single (single Y) equal or unequal,75 mm |
| 34 | S & F in repairsPVC (SWR) branch piece, single (single Y) equal or unequal,75 mm with access door |
| 35 | S & F in repairsPVC (SWR) branch piece, single (single Y) equal or unequal,110mm |
| 36 | S & F in repairsPVC (SWR) branch piece, single (single Y) equal or unequal,110mm with access door |
| 37 | S & F in repairsPVC (SWR) branch piece, double (double Y) equal or unequal,75 mm |
| 38 | S & F in repairsPVC (SWR) branch piece, double (double Y) equal or unequal,75 mm with access door |
| 39 | S & F in repairsPVC (SWR) branch piece, double (double Y) equal or unequal,110mm |
| 40 | S & F in repairsPVC (SWR) branch piece, double (double Y) equal or unequal,110mm with access door |
| 41 | S & F in repairs 40 mm bore PVC pipes single socketed in any length jointed and fixed to walls and floors for spouts, washbasin outlet |
| 42 | S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white with integral foot rests with flush pipe of 32mm dia including 10 ltr capacity low level flushing cistern with necessary PVC connections 15mm size with PTMT nuts of length 450mm long etc complete. |
| 43 | S&F vitreous China wash basin white, flat back size 550 x 400mm including 15mm dia pillar tap, CP waste coupling, chain and plug, waste fitting, union and waste pipe 32mm dia of required length and all necessary 450mm long outlet and inlet PVC connections pipes with PTMT check nuts complete.in repair |
| 44 | S&F in repairs vitreous coloured China Europeon water closet (Pedestal Pattern)including 10 ltr capacity low level flushing cistern with flush pipe of 32mm dia including necessary PVC connections 15mm size with PTMT nuts of length 450mm long etc complete. |
| 45 | Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 15mm and Supply & fixing 15 mm bore GI tubing, medium grade with and including all fittings and fixed to walls and ceilings or laid in floors complete all as specified and as directed. |
| 46 | Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 15mm complete all as specified and directed. |
| 47 | S&F Unplasticised PVC pipes of 15mm bore of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe |
| 48 | S&F in repairs 10 ltr, PVC, valveless, syphonic action type, flushing cistern, low level/ high level including inlet, ball valve, float and handle including brackets with and including PVC flush pipe 32 mm bore, of suitable length as per site requirement connecting to WC etc, and connections to pipes and fixing of chain and pull, or lever, if any complete all as specified and directed. |
| 49 | S&F in repairs CP stop cock 15mm borefancy type chromium plated with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 50 | S&F in repairs CP bib tap 15mm bore fancy type with crutch or butterfly handle, screwedfor iron pipe or for unions and fixed complete all as specified and directed. |
| 51 | S&F in repairs CP pillar taps 15mm bore, cast copper alloy, chromium plated fancy type complete all as specified and directed. |
| 52 | S&F in repairs waste fitting of 32 mm borebrass, chromium plated for glazed ware wash basin etc complete all as specified and directed. |
| 53 | S&F in repairs waste fitting of 40 mm borebrass , chromium plated for glazed ware for sink coulpling etc complete all as specified and directed. |
| 54 | S&F in repairs waste pipe for WHB 32mm bore fixed to wash hand basin coupling length pipe 0.90 mtrs each complete all as specified and directed. |
| 55 | S&F in repairs waste pipe for kitchen sink 40mm bore fixed to sinks coupling length pipe 0.90 mtrs each complete all as specified and directed. |
| 56 | S&F in repairs stainless steel grating in round shape 100mm dia with one hole for waste pipe complete all as specified and directed. |
| 57 | S&Fin repairsstainless steel grating in ground shape 100mm dia without hole complete all as specified and directed. |
| 58 | S&F GI Tubes 15mm bore, \"medium grade\" galvanised,with all fitting and fixed complete to walls and ceilings or laid in floor complete all as specified and directed |
| 59 | S&F low density polyethene pipes (LDPE) 32mm of pressure rating 6 Kg/cm2 fixed to walls or laid in floors etc. |
| 60 | S&F in repairs Health faucet with 1 mtr tube & hook complete all as specified and directed. |
| 61 | S&F in repairs two way Bib cock long body with wall flange fitted by 15mm bore complete all as specified and as directed |
| 62 | S & F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement |
| 63 | S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs,washers and waste pipe including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting unions to pipe, overall size 495mmx420mm bowl size 410mmx330mmx160mm complete iincluding demolition of old cudappah sink/old sink all as specified and as directed. |
| 64 | Supply & fixing in repairs 20 mm bore GI tubing, medium grade with and including all fittings and fixed to walls and ceilings or laid in floors complete all as specified and as directed. |
| 65 | Supply & fixing in repairs 40 mm bore GI tubing, medium grade with and including all fittings and fixed to walls and ceilings or laid in floors complete all as specified and as directed. |
| 66 | Supply & fixing in repairs 25 mm bore GI tubing, medium grade with and including all fittings and fixed to walls and ceilings or laid in floors complete all as specified and as directed. |
| 67 | S&F in repair for gun metal globe or gate valves with iron wheel head , screwed both ends for iron pipe & fixed of size 20mm bore complete all as specified and directed. |
| 68 | Taking down chowkhat or frame (without taking off shutter from the frame)not exceeding 1.5 Square Metre each , removing from the site including cutting holes required fortaking out existing hold fast etc. complete all as specified and as directed. |
| 69 | All as per Item above butexceeding 1.5 Square Metre and not exceeding 04 Square Metre each complete all as specifiedand directed. |
| 70 | Solid PVC Door Frame of size 50mmx 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing |
| 71 | M&L for factory made solid PVC panel type PVC door shutter 30mm thick consisting of frame madeout of MS tubes for top and bottom rails MS frame shall be covered with moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rails, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent supplying and fixing in the frame at site as per specifications and drawing given under SSR Part II 2020 complete all as specified and directed |
| 72 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). all as specified and directed.Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall beacceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account will be provided |
| 73 | Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. |
| 74 | M & L for 20 to 25mm machine cut,polished cudappah stone slab, , in window cill, kitchen platform and similar work,laid over and including backing coat, in CM 1:4, 15mm thick,jointed with grey cement slurry mixed with pigment to match the shade of the slab including taking down/dismantling old one complete all as specified and as directed |
| 75 | M&L Granite (of any type) Tiles 20mm thick in floormachine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including 20mm thick CM 1:6 screed bed for laying floor finishes and cutting andpolishingincluding taking down/dismantling old one complete all as specified and as directed |
| 76 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations |
| 77 | Taking down carefully existing aluminium sliding window shutters,(glass/wire mesh) /frame not exceeding 1.5 Square Metre each and re-fixing the shutters in existing position, after repairing complete all as specifiedand directed. |
| 78 | All as per Item above butexceeding 1.5 Square Metre and not exceeding 04 Square Metre. |
| 79 | S&F standard aluminum section powder coated in partition / frame and door shutter, sliding windows / ventilators and places otherwise not specified cut to size, jointed with cadmium plated steel screws, including rubber beading or gaskets for fixing glass or wire cloth or Bakelite sheet and all necessary fittings, hinges, screws, plugs, locking arrangements for windows, Nylon ball bearing etc completed all as specified and directed (Aluminum section shall be of make Jindal / Hindalco / Indalco).Note :- Weight of Aluminum sections for frames and shutters shall be only considered for payment.Cost of other consumables required for the item shall be deemed to be included in the quoted rate.However glass panes / Bakelite sheet / wire cloth / mortice lock / locking stay / floor spring / floor door stopper only will be measured and paid separately under respective items as supply only.Fixing by element of these items shall be deemed to be included in quoted rate. |
| 80 | S&F for 4.80mm thick glass ordinary quality plain withincluding wooden/rubber beading or gasket for aluminium sectioncomplete all as specified |
| 81 | S&F for 3.0mm thick pin head glass withincluding wooden/rubber beading or gasket for aluminium sectioncomplete all as specified |
| 82 | S&Faluminum anodised grill DG- 104 of Deco grill or equivalent fixed with \"F\"/\"U\" section approved make all as specified and directed.Note : (i)Make shall be of M/s Decogrille of M/s Associated Groups or equivalent as approved by the GE.(ii) Minimum thickness of anodizing shall be 15 microns. |
| 83 | Supply only stainless steel wire cloth,0.36 mm nominal dia ofwire and average width ofaperture 1.40mm and fixed with in wooden windows, doors etc and including M&L for fixing of teak wooden beading of suitable size all around complete all as specified and as directed by the Engineer-in-Charge. |
| 84 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth |
| 85 | Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position.(Any Size/Capacity) |
| 86 | Dismantling completely existing roof treatment (excluding cement screed bed ) including loosened cement plaster and exposing the top surface of RCC slab and making good the same in CM 1:4 and removing rubbish, etc to a distance exceeding 500m and not exceeding 1.0km complete all as specified and directed by the Engineer-in-charge |
| 87 | M&L for PCC (1:2:4) type B-1, averaging 50mm thick using 20mm graded stone aggregate as in leveling course over RCC roof/ terrace surfaces to achieve required slope, benching etc including making rounded or chamfered on edges mixed with WPC(water proofing compound) as per manufacturer\"s instructions, complete all as specified and directed.Note : WPC shall be measured and paid separately as \"supply only\". |
| 88 | Supply only Integral waterproofing compound. |
| 89 | i) M&L for preparation of surface including cleaning of all dirts and provide the following water proofing treatment in Accessible Roof/Inaccessible Roof & terrace, narrow width over the roof gutter of store houses or chajjas etc. ii)Apply oil boundbitumenprimer @ 0.25 gm/Sqm manufacturerby thesameagency as that of APPwithdensityof 0.87-0-89 Kglitr at 25 c on the prepareddry roofsurface provideand layAPPmodified water proofingmembrancereinforced with nonwoovenpolystermatt with physicalproperties as under :- (aa)Membrane Weight -not less than 3.0 Kg/Sqm (ab)Non woven polyster weight-160 gm /Sqm (ac)Joint Tensile strengthLongiutinal-650 N/SqcmTranverseand longitudnal-350/Sqcm (ad) Tear strengthLongiutinal-300N /cm Tranverse -250N/cm Direction(ae)Impermeability underwater pressure 2Kgf/Sqcm(iii)APP membraneshallbe laidusing butaretorch by Torchon applicationwith minimum 10cmside overlapand 15cmend lap. Thelaying of membranceshall begot, donethroughan authroiset applicate of Manufacture of membrane.(iv)Over the membrane provide a finishingwith solar reflectivebitumenaluminium to inaccesible roof.paint@ 0.10 Kg/Sqm as prescribed by manufacturer |
| 90 | M&L for preparation of old plastered surfaces on walls, preparation for Acrylic emulsion and applying applying one coat of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resisitance as per IS 15489:2004, alkali & fungal rsistance, dirt resistance exterior paint of required shades(Company Depot Tinted) with silicon additives @ 1.43 litre/10sqm over & including priming coat of extreior primer applied @ 0.90 litre/10 sqm over new surfaces |
| 91 | M&L for complete removal of existing treatment by washing, rubbing down and stopping of old decorated surfaces on walls, preparation for distempering and applying two coat of oilbound distemper over a coat of primer including stopping of nails holes,cracks etc and levelling with minimum 1 mm thick white cement based wall care putty for obtaining plain surface complete all as specified and directed. |
| 92 | M&L for Complete removal of existing treatment and preparation of plastered surfaces on walls, preparation for Acrylic emulsion and applying applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resisitance as per IS 15489:2004, alkali & fungal rsistance, dirt resistance exterior paint of required shades(Company Depot Tinted) with silicon additives @ 1.43 litre/10sqm over & including priming coat of extreior primer applied @ 0.90 litre/10 sqm over new surfaces |
| 93 | M & L for preparation of old distempering surfaces including stopping of nails holes,cracks etc. and applying one coat of oil bound distemper on wall complete all as specified. |
| 94 | Preparation of old surfaces on ceiling (plastered or unplastered or previously white washed) and applying one coat of white wash complete all as specified. |
| 95 | Preparation of old surfaces on wall (plastered or unplastered or previously white washed) and applying one coat of white wash complete all as specified. |
| 96 | M & L for preparation of old wooden surfaces of any description over 10cm width or girth & applying one coat of synthetic enamel paint complete all as specified. |
| 97 | M & L for preparation of old steel surfaces of any description over 10cm width or girth & applying one coat of synthetic enamel paint complete all as specified. |
| 98 | M & L for preparation of old steel surfaces of any description over 10cm width or girth & applying one coat of aluminium paint complete all as specified. |
| 99 | M&L for preparation of old painted surfaces of anydescriptionand applying one coat of cement base paint on wall with necessary scaffolding arrangement.Note: The contractor shall clean the window panes including splashes of paint etc and the quoted rate is deemed to be included for the same. |
| 100 | M&L for formingV groovesin plaster n exc 5mm deep and n exc 5 mm on face and filling crackswith crack X paste of M/s Dr fixit or with eequivalent of M/s STP Ltd including necessary scaffolding |
| 101 | M&L for formingV groovesin plasterexc 5mm deep andexc 5 mm on face and filling crackswith cement mixed with M/s Dr fixit or equivalent of M/s STP Ltd including necessary scaffolding |
| 102 | M&L for providing leakage/seepage proof coating by applyingprimeseal primer of Dr fixit or equivalent of M/s STP Ltd under torch dry condiiton and subsequently applying two coats of water proof decorative elastomeric coating system rain coat select system of M/s Dr fixit or equivalent of M/s STP Ltd over prepared surfaces including necessary scaffoldingNote The afore said treatment shall be got executed by the contractor frpom authorised applicator of the manufacturer and also necessary documents in support of the above shall be submitted by the contractor complete all as specified and directed. |
| 103 | M&L for dismantling of ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets |
| 104 | S&F Anodised aluminium snap grid frame work for false ceiling all as specified fixed using Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified |
| 105 | Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions |
| 106 | Dismantling fencing wire mesh, any type |
| 107 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire |
| 108 | S & F framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E 165 |
| 109 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings as specified |
| 110 | S&F Pre- painted galvalume sheet having aluminum zinc coating with hot dip alloy of 55% Aluminium 43.5% Zinc 1.5% Silicon and finished with resin coat on both surfaces @ 150 gm/sqm of coating (total both surfaces) having overall width and laid width as specified GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with fixed using hot dip galvanized, self drilling and self tapping screws neoprene and EPDM washers. Penetrations and laps in sheet shall be sealed by usingproper sealant profile. HDPE fillers shall be provided wherever required to close voids between sheets, sheet & fastners etc. completely all as specified and directed. upto maximum height of 20 Mtr including scaffolding and all safety equipments if required.Note : No additional payment on any account will be considered and only plan area whatever have been provided will be measured. Rate quoted maybe considered including of bending for specific curvature as provided in existing building. |
| 111 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet in ridge 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified upto maximum height of 20 Mtr including scaffolding and all safety equipments if required.Note : No additional payment on any account will be considered and only plan area whatever have been provided will be measured. Rate quoted maybe considered including of bending for specific curvature as provided in existing building. |
| 112 | S&F in repairs stainless steel butt hinges, 100mm,medium weight complete all as specified and directed |
| 113 | S&F in repairs stainless steel butt hinges, 75mm,medium weight complete all as specified and directed |
| 114 | S&F in repairs aluminium, anodised, barrel tower bolts of extruded section of size 200mm complete all as specified and directed. |
| 115 | S&F in repairs aluminium, anodised, barrel tower bolts of extruded section of size 150mm complete all as specified and directed. |
| 116 | S&F in repairs aluminium, anodised, barrel tower bolts of extruded section of size 100mm complete all as specified and directed. |
| 117 | S&F in repairs extruded aluminium alloy handles, fabricated type of size 100mm in any position complete all as specified and directed. |
| 118 | S&F in repairs extruded aluminium alloy handles, fabricated type of size 150mm in any position complete all as specified and directed. |
| 119 | S&F in repairs floor door stopper of aluminium alloy bodyand tongue, anodised with hard drawn steel spring of length 140mm fixed in flooretc complete all as specified and directed. |
| 120 | S &F, in repairs,stainless steel wire cloth,0.36 mm nominal dia ofwire and average width ofaperture 1.40mm and fixed with in wooden and aluminium windows, doors etc,and fixing of teak wooden beeding, aluminium patticomplete all as specified and as directed by the Engineer in charge.Note: i) The rate includes for the removal of shutter from the frame for aluminium windowsand refixing the same after fixing of wiremesh along with aluminium pattiii) The rate includes for the removal of wooden beading from the shutterand refixing the same after fixing of wire mesh in wooden door/windows |
| 121 | S&F in repairs aluminium alloy anodised sliding door bolt with hasp and staple(bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolt of extruded section of size 300 mm fixed at any position all as specified and directed. |
| 122 | S&F in repairs 4 levers aluminium Mortice lock size 100 mm |
| 123 | S&F in repairs aluminium (Die cast body)hydraulically Door closer regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg all as specified and directed. |
| 124 | S&F in repairs anodised aluminium alloy curtain rods with fixing brackets, stops, rollers etc all as specified.Note: A sum of Rs 17,127.00 towards sch of credit shall be deducted to arrive the contract sum |
