|
| 1 | Maint and servicing of DG set 400 KVA canopy type, through authorized service agencyofOEM, including replacement of defective/worn out parts with new spares such as gaskets, rubber hoses with clamps, nuts bolts and including tappet setting, checking of batteries, adding distilled water etcall as specified and directed. Note:- Cost of S&F for replacing spare parts mentioned here-in-below under relevant items shall not considered to be included in this item. |
| 2 | All as per Sl Item No 1.00 Above but for DG set of capacity 200 - 320 KVA |
| 3 | All as per Sl Item No 1.00 Above but for DG set of capacity 62.5 - 160 KVA |
| 4 | S&F in repair Fuel filter with O ring suitable for 400 KVA DG set & make as per OEM complete all as specified and directed. |
| 5 | S&F in repair Fuel filter with O ring suitable for 200 - 320 KVA DG set & make as per OEM complete all as specified and directed. |
| 6 | S&F in repair Fuel filter with O ring suitable for 62.5 - 160 KVA DG set & make as per OEM complete all as specified and directed. |
| 7 | S&F in repair Lub oil filter suitable for 400 KVA DG set & make as per OEM complete all as specified and directed. |
| 8 | S&F in repairLub oil filtersuitable for 200 - 320 KVA DG set & make as per OEM complete all as specified and directed. |
| 9 | S&F in repair Lub oil filter suitable for 62.5 - 160 KVA DG set & make as per OEM complete all as specified and directed. |
| 10 | S&F in repairAir cleaner filter ( inner and outer ) suitable for 400 KVA DG set & make as per OEM complete all as specified and directed. |
| 11 | S&F in repair Air cleaner filter ( inner and outer ) suitable for 200 - 320 KVA DG set & make as per OEM complete all as specified and directed. |
| 12 | S&F in repairAir cleaner filter ( inner and outer ) suitable for 62.5 - 160 KVA DG set & make as per OEM complete all as specified and directed. |
| 13 | S&F in repairBypass filter suitable for 400 KVA DG set & make as per OEM complete all as specified and directed. |
| 14 | S&F in repairBypass filter suitable for 200 - 320 KVA DG set & make as per OEM complete all as specified and directed. |
| 15 | S&F in repair V belt suitable for 400 KVA DG set & make as per OEM complete all as specified and directed. |
| 16 | S&F in repair V belt suitable for 200 - 320 KVA DG set & make as per OEM complete all as specified and directed. |
| 17 | S&F in repair V belt suitable for 62.5 - 160 KVA DG set & make as per OEM complete all as specified and directed. |
| 18 | S&F in repair Display control panel (LED Board) suitable for 62.5 - 400 KVA DG set & make as per OEM complete all as specified and directed. |
| 19 | S&F in repair Fuel actuator with O Ring suitable for 62.5 - 400 KVA DG set & make as per OEM complete all as specified and directed. |
| 20 | S&F in repair coolant temperature sensor (coolent control safety) suitable for 62.5 - 400 KVA DG set & make as per OEM complete all as specified and directed. |
| 21 | S&F in repair AMF controller assy for auto/manual operation suitable for 62.5 - 400 KVA DG set & make as per OEM complete all as specified and directed. |
| 22 | S&F in repair Control assy main generator panel any type suitable for 62.5 - 400 KVA DG set & make as per OEM complete all as specified and directed. |
| 23 | S&F in repair Lube oil pressuresensor adaptor (oil control safety) suitable for 62.5 - 400 KVA DG set & make as per OEM complete all as specified and directed. |
| 24 | S&F in repair Stop solenoid switch 12 Volts of make as per OEM complete all as specified and directed. |
| 25 | S&F in repair Stop solenoid switch 24 Volts of make as per OEM complete all as specified and directed. |
| 26 | Supply & Filling Coolant suitable for radiators & of make as per OEM complete all as specified and directed. |
| 27 | S&F in repair Turbo charger for any capacity DG set & make as per OEM complete all as specified and directed. |
| 28 | Supply & Filling engine oil multi grade 15W40 all as specified and directed.Make: Servo / Bosch / Castrol / Valvoline / HPCL / ELF Oil |
| 29 | S & F in repair Automatic Voltage Regulator suitable for DG set of any capacity and of make as per OEM complete all as specified and as directed. |
| 30 | M & L for calibration of FIP and fuel injector from authorised dealer including petty repairs to make the FIP and injectors functional for DG set of capacity of 62.5-400 KVAcomplete all as specified and directed. |
| 31 | Disconnecting the electric connection of Alternator of capacity 400 KVA DG set, taking the accumalator and cleaning the core assemblythrough air blower, heat varnishing with insulating material complete all as specified and as directed. |
| 32 | All as per Sl Item No 31.00 Above but for DG set of capacity 200 - 320 KVA |
| 33 | All as per Sl Item No 31.00 Above but for DG set of capacity 62.5 - 160 KVA |
| 34 | S & F in repair Lub Oil cooler plate suitable for DG set of any capacity and of make as per OEM complete all as specified and as directed. |
| 35 | S & F in repair Lub Oil pressure gauge pipe of required standard size suitable for DG set of any capacity and of make as per OEM complete all as specified and as directed. |
| 36 | S & F in repair Oil spray nozzle assembly suitable for DG set of any capacity and of make as per OEM complete all as specified and as directed. |
| 37 | S&F in repair Main Bearing as per existing, suitable for DG set of 62.5 to 400 KVAcapacity and of make as per OEM complete all as specified and as directed. |
| 38 | S&F in repair Water temp switch suitable for DG set of any capacity and of make as per OEM complete all as specified and as directed. |
| 39 | S&F in repair Magnetic Pick Up Unit ( MPU) suitable for DG set of any capacity and of make as per OEM complete all as specified and as directed. |
| 40 | S & F in repair water pump suitable for DG set of any capacity and of make as per OEM complete all as specified and as directed. |
| 41 | S & F in repair Lub Oil pump high discharge of required standard size suitable for DG set of any capacity and of make as per OEM complete all as specified and as directed. |
| 42 | S & F in repair fan assembly suitable for 62.5 to 160 KVA DG set and of make as per OEM complete all as specified and as directed. |
| 43 | S & F in repair fan assembly suitable for 200 to 320 KVA DG set and of make as per OEM complete all as specified and as directed. |
| 44 | S & F in repair Brush holder spindle suitable for 62.5 to 160 KVA DG set and of make as per OEM complete all as specified and as directed. |
| 45 | S & F in repair Brush holder spindle suitable for 200 to 320 KVA DG set and of make as per OEM complete all as specified and as directed. |
| 46 | S & F in repair NDE bearing cap suitable for 62.5 to 160 KVA DG set and of make as per OEM complete all as specified and as directed. |
| 47 | S & F in repair NDE bearing cap suitable for 200 to 320 KVA DG set and of make as per OEM complete all as specified and as directed. |
| 48 | S & F in repair NDE bearing cap suitable for 400 KVA DG set and of make as per OEM complete all as specified and as directed. |
| 49 | S & F in repair Slipring assembly suitable for 62.5 to 160 KVA DG set and of make as per OEM complete all as specified and as directed. |
| 50 | S & F in repair Slipring assembly suitable for 200 to 320 KVA DG set and of make as per OEM complete all as specified and as directed. |
| 51 | S & F in repair Slipring assembly suitable for 400 KVA DG set and of make as per OEM complete all as specified and as directed. |
| 52 | S & F in repair Excitation (CX) unit suitable for 62.5 to 160 KVA DG set and of make as per OEM complete all as specified and as directed. |
| 53 | S & F in repair Excitation (CX) unit suitable for 200 to 320 KVA DG set and of make as per OEM complete all as specified and as directed. |
| 54 | S & F in repair Excitation (CX) unit suitable for 400 KVA DG set and of make as per OEM complete all as specified and as directed. |
| 55 | S & F in repair Battery terminal made with brass suitable for 12 volt battery and of make as per OEM complete all as specified and directed. |
| 56 | S & F in repair 12 V, 180 AH battery complete all as specified and directed. Make:- Exide / Amron / Luminous / Nicco / AMCO / Amara Raja |
| 57 | Material and labour for cleaning external surface of DG set of 62.5 to 400 KVA capacity and make with cleaning agent including cleaning of radiators coil with with mild acid (or caustic soda)complete all as specified and as directed. |
| 58 | Cleaning of diesel tank of DG set of 62.5 to 400 KVA capacity carefully by draining out fuel in the tank including disconnection from fuel system, De-scaling the diesel tank with water pressure and removing the complete sludge deposited, drying the tank, repairing any leakage, cleaning and testing of fuel line up to fuel pump inlet complete all as specified and as directed. |
| 59 | S & F in repair self starter 24 volt DC suitable for DG set of any capacity and of make as per OEM complete all as specified and as directed |
| 60 | S & F in repair self starter 12 volt DC suitable for DG set of any capacity and of make as per OEM complete all as specified and as directed |
| 61 | M&L for taking down, transporting, dismantling, repairing and servicing of self starter 12/24 volt DC at authorized service centre of OEM including assembling, bringing back, installing, commissioning and testingthe same complete all as specified and as directed. |
| 62 | M & L for maintanence and servicing of AMF panel including replacing unserviceable items, testing and replacing unserviceable wiring connection in panel for automatic operation through relay, contactor, timer, sensor etc all as directed.Note:-Cost of M&L for replacing spare parts mentioned here-in-below under relevant items shall not considered to be included in this item. |
| 63 | S&F in repair multifunction meter, digital type (displaying A, V, PF etc.) complete all as specified and as directed.Make:- Elmeasure / L&T / Schneider / HPL / SOCOMEC |
| 64 | S&F in repair phase indicator lamps (Red, Yellow and blue) suitable for AMF Panel complete all as specified and directed.Make:-L&T / Siemens / GE / RR Micro / BCH / Schneider |
| 65 | S & F in repair three pole power contactor AC3 250A with Aux contacts 2 Nos, 2 NC suitable for AMF panel complete all as specified and directed.Make: L&T / Indoasian / GE / BCH / HPL / C&S / ABB / Siemens |
| 66 | S & F in repair three pole power contactor AC3 300A with Aux contacts 2 Nos, 2 NC suitable for AMF panel complete all as specified and directed.Make: L&T / Indoasian / GE / BCH / HPL / C&S / ABB / Siemens |
| 67 | S & F in repair AC Control contactor - M00AC - 15 4A at 415 Volt suitable for AMF panel complete all as specified and directed.Make: L&T / Indoasian / GE / BCH / HPL / C&S / ABB / Siemens |
| 68 | S & F in repair DC Control contactor - M00DC - 15 4A at 415 Volt suitable for AMF panel complete all as specified and directed.Make: L&T / Indoasian / GE / BCH / HPL / C&S / ABB / Siemens |
| 69 | Comprehensive maintenance of 02 Nos online UPS (01 No 60 KVA UPS at OT Theater & 01 No 60 KVA UPS at ICU) once in a month or as and when directed by Engr-in-Charge / as per requirement by a qualified technician of OEM, comprising of the following outlined services complete all as specified and directed:- Notes:-(i) One time Servicing of 02 Nos UPS shall be measured as one unit.(ii)The Contractor\"s technical team shall visit the installation site for periodic preventive maintenance, check up of the UPS system and batteries every month. System shall be cleaned and general performance will be checked and report shall be submitted to the Engr-in-Charge.(iii) DC back up source will be maintained by applying white petroleum jelly, checking/servicing of batteries incl toping up of distilled water etc as applicable.(iv) Apart from the periodic preventive maint visits, all breakdown calls for the systems covered under the contract shall be attended / troubleshooted incl Sunday and holidays.(v) Cost of all the minor spares (incl inverter Transformer)to put the UPS in working condition shall deemed to be incl in unit rate quoted complete however supply of major components shall be measured under relevant Items.(vi)Response time during normal working hours shall not be more than 4 Hrs from the time of receipt of complaint and the resolution time shall be maximum 48 hrs, based on the nature of complaint and replacement of components and boards. vii) Standby UPS of similar capacity shall be provided by the contractor on site till the repair of UPS.Transport / rent of the same shall be borne by the contractor during the contract period and unit rate quoted shall deemed to include this aspect complete all as directed by the Engr-in-charge. |
| 70 | S&F in repairs 12 V,120 AHSMF battery complete all as specified and directed. Make : Exide / Amron / Luminous / Nicco / AMCO / Amara Raja |
| 71 | S&F in repair inverter control card suitable for 60 KVA online UPS system including testing and commissioning complete all as specified and directed. |
| 72 | S&F in repair IGBT Drive card suitable for 60 KVA online UPS system including testing and commissioning complete all as specified and directed. |
| 73 | S&F in repair input sensing transformer suitable for 60 KVA online UPS system including testing and commissioning complete all as specified and directed. |
| 74 | S&F in repair output feedback transformer suitable for 60 KVA online UPS system including testing and commissioning complete all as specified and directed. |
| 75 | S&F in repair control and power cable suitable for 40 KVA online UPS system including testing and commissioning complete all as specified and directed. |
| 76 | S&F in repair on-load change over switch 400 Amp capacity, 4 Pole, 415 volts with SS enclosure complete all as specified and directed.Make:- L&T / Legrand / ABB / Siemens / Schnieder / Havells India Ltd./ Indo Asian |
| 77 | S&F in repair on-load change over switch 200 Amp capacity, 4 Pole, 415 volts with SS enclosure complete all as specified and directed.Make:- L&T / Legrand / ABB / Siemens / Schnieder / Havells India Ltd./ Indo Asian |
| 78 | S&F in repair on-load change over switch 100 Amp capacity, 4 Pole, 415 volts with SS enclosure complete all as specified and directed.Make:- L&T / Legrand / ABB / Siemens / Schnieder / Havells India Ltd./ Indo Asian |
| 79 | S&F in repair on-load change over switch 630 Amp capacity, 4 Pole, 415 volts with SS enclosure complete all as specified and directed.Make:- L&T / Legrand / ABB / Siemens / Schnieder / Havells India Ltd./ Indo Asian |
| 80 | S&F in repair LED street light fitting of capacity 60 watt, IP-66 (minimum), integrated typewith high efficiency electronic driver, SPD of capaciity 10 KV, 5700 K pressure die cast aluminium housing with toughened glass cover, internally prewired and including electrically connecting complete all as specified and as directed.Make:- Signify Innovations India Ltd (Formerly Phillips) / Havells / Crompton / Bajaj Note:- Supply of new GI Pipe bracket if requiredshall be measured and paid separately under relevant item. |
| 81 | All as per serial Item No. 80.00 above but LED street light fitting of capacity 90 W |
| 82 | All as per serial Item No. 80.00 above but LED street light fitting of capacity 100 W |
| 83 | S&F in repair LED flood light fitting of capacity 120 watt, IP-66 (minimum) with luminous efficacy 100 Lumen/watt (minimum), SPD of capaciity 10 KV, 5700K, pressure die cast aluminium housing, toughened glass cover, internally prewired and including electrically connecting & taking down old unserviceable flood light fittings from any position complete all as specified and as directed.Make:- Signify Innovations India Ltd (Formerly Phillips) / Havells / Crompton / Bajaj |
| 84 | All as per serial Item No. 83.00 above but LED flood light fitting of capacity 150 W |
| 85 | All as per serial Item No. 83.00 above but LED flood light fitting of capacity 200 W |
| 86 | All as per serial Item No. 83.00 above but LED flood light fitting of capacity 250 W |
| 87 | S&F in repair bracket suitable for street light made out of GI pipe light grade of 40 mm bore & 1.20 mtr length (minimum), bend to shape including 2 pairs of MS flat iron clamps made out of 40 x 5 mm MS flat, nuts, bolts & washers etc,& painting the bracket with two coat of aluminium paint over a coat of red oxide primer complete all as specified and directed.Make of Pipe :- Tata / Jindal Steel / Surya Roshni Ltd. /Bhushan Power & Steel Ltd. / M/s APL Apollo Tubes Ltd |
| 88 | M&L cross arms,bracings,supports, clamps and back plates fabricated fromstructuralsteelsections and includingnuts,bolts,washers, welding,bendingcoldorhot, drilling holes for bolts, in any shape or size as indicated or directed and including preparation of surfaces and applying two coats of aluminium paint over a coat of primer and dismantling complete all as specified and directed.Make of paint : Jotun India Pvt Ltd / Asian Paints / Berger / Jenson & Nicholson Paints Ltd / Shalimar Paints Ltd |
| 89 | S&F in repair PVC insulated 3 core multistranded sheathed cable with 1.5 Sqmm copper conductor for connection of street / security light etc complete all as specified and directed.Make:- Havells / KEI / Polycab / RR Kabel Ltd. / HPL |
| 90 | S&F in repair 1 x 9 / 10 watt LED bollard light fitting, inverted conical shape, opal acrylic diffuser, IP-65, including hot dip galvanized pole, driver, all fixing arrangement etc. including electrically connecting complete all as specified and directed.Make:- Signify Innovations India Ltd (Formerly Phillips) / Havells / Crompton / Bajaj |
| 91 | S&F in repair 35 watt LED post top lantern with polycarbonate opal diffuser, pressure die cast aluminium housing, IP-65 (minimum),high efficient constant current electronic driver including electrically connecting complete all as specified and directed.Make :- Signify Innovations India Ltd (Formerly Phillips) / Havells / Crompton / Bajaj |
| 92 | Supply & laying LT XLPE insulated, armoured heavy duty electric cable with alumimium conductor, 1100 volts grade, cross sectional area 16 Sqmm x 4 Core, laid in trenches / duct / on pole complete all as specified and directed.Make :- Havells / KEI / Polycab / Gloster / Finolex |
| 93 | All as per Sl Item No 92.00 above but25 Sqmm x 4 core |
| 94 | All as per Sl Item No 92.00 above but50 Sqmm x 3.5 core |
| 95 | Excavation in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes for laying cables etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out all excavated material in soft / loose soil complete all as specified and directed. |
| 96 | Returning, filling in and including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed. |
| 97 | Removing of excavated surplus soil to a distance n. exc 50 m and depositing wheredirected at a level n. exc. 1.5 m above the starting point complete all as specified and directed. |
| 98 | M&L sand cushioning with clean and dry sand in trenches for protection of UG cable and including punning down complete all as specified and directed. Note:- Punned thickness shall only be measured and paid. |
| 99 | Supply & laying sub class \"B\", class designation 75 bricks of old size, laid along alignment of cable as protection to cable in trenches complete all as specified and directed. |
| 100 | S&F in repair steel tubular swaged poles conforming toIS-2713, complete with cast iron base plate, finial taper plug, bolts, nuts & screws, type 410 SP-31 (9 m long) and including painting with two coat of aluminium paint over a coat of primer on exposed surfaces and black bituminous paint on steel surface embeded in concrete and 05 Nos band / strips with black and yellow synthetic enamel paint alternatively, 30 cm wide each at a distance of 30 cm from top of plinth block and numbering of poles complete all as specified and directed.Note:- Excavation, earth work and PCC work will be measured and paid for separately under respective items.Make of Pole:-Calcutta Poles & Tubes / Skipper Limited / Jindal Steel / National tubing Co / Bombay tube & StoreMake of paint :- Jotun India Pvt Ltd / Asian Paints / Berger / Jenson & Nicholson Paints Ltd / Shalimar Paints Ltd |
| 101 | M&L PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete including demolition complete all as specified and directed. |
| 102 | M&L plain cement concrete 1:2:4 type B1, (using 20 mm graded crushed stone aggregate) as in copings, benching and the like etc. including necessary formwork & demolition of old concrete complete all as specified and directed. |
| 103 | M&L for cutting the tarmac / hard standings in road and excavating trenches across the road in size not exceeding 0.45 m wide and 0.6 m depth for laying cable including refilling earth & making good top surface of the disturbed portion with 100mm thick PCC 1:3:6 or bituminous mix as per existing &matching with the surroundings complete all as specified and directed. |
| 104 | S&F in repair 50 mm bore galvanised steel tubing, medium grade with necessary fittings, laid under road crossing, for cable protection complete all as specified and directed.Make - Tata / Jindal Steel / Surya Roshni Ltd. /Bhushan Power & Steel Ltd. / M/s APL Apollo Tubes Ltd |
| 105 | Taking out existing XLPE Cable of any size inunderground / alongwith pole or in any positon, removing materials to store for keeping in safe custody or for taking credit complete all as specified and as directed.Note:- Excavation and earthwork (if required) shall be measured and paid seperately. |
| 106 | Re-laying only old servicable (cable obtained from taking out old cable here-in-before after checking the fault) UGLT XLPE electric cable with alumimium conductor, 1100 volts grade of any size, laid in trenches / duct / on pole complete all as specified and directed. |
| 107 | M&L for cable route indicator for LT UG cable, 1100 Volt grade made out of 4mm thick MS sheet in round shape of dia not less than 200mm, embossed with LT Cable on it, bolted with 2 nut of suitable size at top of 40 x 6 mm MS flat iron of length not less than 1 meter, complete metal surfaces painted with 2 coats of synthetic enamel paint over a coat of primer & bottom of flat iron embedded in PCC 1:3:6 type C2 of size 200mm x 200mm x 500mm (400mm below ground level an 100mm above ground level), exposed surface of concrete painted with 3 coats of white wash including necessary earth work complete all as specified and directed. |
| 108 | Taking down existing loop in loop out junction box, disconnecting the cable connections and refixing the same loop in loop out junction box with new cable connections including providing new set of aluminium lugs / thimbles of size 10 to 35 sqmm (as reqd) for 3.5/4 core existing LT cable of any type, necessary insulation with tape, clamps for fixing of cables, fittings and fixtures, nut bolts etc complete all as specified anddirected. |
| 109 | M&L for disconnecting electrical connection of defective / burnt out UG LT cable of any size 2 to 4 core from main switch / DB / Junction boxe / LT Panels, excavating, taking out the required length of existing cable from loop, cutting the defective portion of cable old termination at end, providing new aluminiumthimbles / lugs of suitable size and reconnecting the same with existing location and refilling of cable trench with existing sand and bricks complete all as specified and as directed.Note :- (i) The rate quoted shall deemed to include cost of necessary earth work, matching the disturbed surfaces as per existing.(ii) Additional length of cable or joint required shall be measured and paid seperately |
| 110 | S&F in repair weather proof cable junction box of size not less than 210 mmx 310 mm x 116 mm with terminals, IP 66 (minimum), suitable for outdoor installation,suitable for 10 to 25 sqmm cable, including 01 No 5/6 Amp MCB, 100 Amp rated 3 pole connector, fixing arrangement with MS flat of size 25 x 3 mm with necessary nuts, bolt and washers complete all as specified anddirected.Make :- Hensel / Sintex Industries Ltd. / C&S electric Ltd. / National |
| 111 | M&L preparation of old painted surface of existing 9 m long old steel poles with connected cross arms, cable protection pipes, clamps, street light brackets etc, and including applying one coat of aluminium paint on complete height of the pole and applying one coat of synthetic enamel paint upto 1.50 m height (05 Nos band / strips with black and yellow strips alternatively, 30 cm wide each at a distance of 30 cm) from top of of coping with multi colour strips as per the colour code, writing pole details & applying one coat of white wash on pole coping complete all as specified and directed.Make of paint :- Jotun India Pvt Ltd / Asian Paints / Berger / Jenson & Nicholson Paints Ltd / Shalimar Paints Ltd |
| 112 | Taking down defective street light fitting of any make / type / capacity from top of pole / walls / high mastat a height not less than 7.0 m, at any location, for repair work and re-fixing the same after repair work including testing and commissioning complete all as specified and directed.Note:-(i) M&L forItems like ballast, lamp, ignitor, capacitors, electronicdrivers, surge protection devices etcshall be measured and paid separately under relevant items. However rate quoted shall deemed to include cost of minor spares like nut bolts, circle clips, clamps etc (if reqd)(ii) Necessary T&P like ladders etc required to take the fitting down shall be arranged by the contractor. |
| 113 | S & F in repair powered by inbuilt, isolated electronic LED driver (SMPS based constant current supply) suitable for 120-200 watt LED street lights / flood lights / Post top lantern / Bollard light fittings, site selectable with lower THD, Output Open / Short Circuit protection, Phase to Phase protection, Over Voltage protection, Surge Voltage protection complete all as specified and directed. |
| 114 | All as per Sl Item No 113.00 above but suitable for 45 to 100 watt LED. |
| 115 | Supply only surge protection device of capacity 10 KV & make as per existing, suitable for street light / flood light / post top lantern complete all as specified and directed. |
| 116 | M&L in repair for wiring from LED panel to driver for 120-200 W LED fittings as per existing complete all as specified and directed. |
| 117 | All as per Sl Item No 116.00 above but suitable for 45 to 100 watt LED. |
| 118 | M&L earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick buried directly in ground in vertical position (earth pit not less than 2.25 m deep below the normal ground level) with top edge of the earth plate not less than 1.5 m below normal ground level, connected to earth lead of galvanised iron strip 32 x 6 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel, all as shown in electrical plate No. 3 of SSR Part-I connected to earthing test point including dismantling complete all as specified and directed.Note:- The unit rate shall also include for earth work in any type of soil, PCC 1:3:6 type C1 chamber, RCC 1:1.5:3, type A1 cover slab, 50 mm thick reinforced with 8 mm dia TMT bar @ 140 mm C/C both ways, 10 mm dia plain bar lifting handle embedded in cover slab, Main earthing lead from earth electrode to test point upto 7.5 m length, 20 mm bore medium grade GI watering pipe, 40 mm bore GI medium grade earth lead protection pipe, funnel, wire mesh, copper lugs, charcoal and common salt in alternate layer etc. |
| 119 | S&F in repairs 12 KW, three phase Nature Switch (using Infrared Sensor technology) based automatic street light timer switch for automatic switching on / off street light based on lux level of nature light (Required Illuminance Level for Switching ON is = 60 Lux and for Switching OFF = 10 Lux). The Sensor should also have part night operation facility of min. 4 hrs to max 12 hrs, consisting of sensor, overload protection fuse gear, 3 Nos contactor, 3 nos Incoming MCBs & 3 nos. Outgoing MCBs of 32-40 Amps each and Circuit wiring (Copper) of min.10 sqmm, terminal blocks for cable entry & control unit enclosed in pole / wall mountable enclosure made out of rust proof, Electric shock proof, termite proof thermoplastic polycarbonate Enclosure (with HINGED LID) conforming to IP66 protection class 2 , complete all as specified and as directed.Make:- Havells / GE / Kakatiya energy system Pvt Ltd / Indo Asian |
| 120 | S&F in repair 4 pole connector 440V AC complete all as specified and as directed. |
| 121 | S&F MCCB 4 pole 40 to 63 Amp, breaking capacity 16 kA, Ics = 100% Icu, thermal magnetic release type with adjustable overload setting (0.8-1.0 ln), adjustable short circuit setting (6-10 lr)including necessary modification in the panel & taking down existing MCCB complete all as specified and as directed.Make :- L&T / Havells / Panasonic/ Hager / ABB / Legrand / Indo Asian / HPL |
| 122 | M&L for disconnecting, removing 0.75 HP to 2 HP motor 415 Volts, 50 Hz, 3 Phase from high mast gear box unit and carrying out necessary rewinding of the burnt core with super enameled copper wire of appropriate gauge, greasing of bearings, rotating shaft, replacing worn out nuts and bolts complete all as specified and directed by Engineer-in-Charge. |
| 123 | M&L for dismantling lantern carriage including periodical maintenance and repairs tolantern carriage / winch of high mast / mid mast of 12.5 m to 16 m height, checking for any short circuit / burnt wire, disconnecting and replacing the wires from light fittings and driver unit and re-fixing the light fittings and re-aligning the carriage and light fittings, checking movement, inspecting the alignment, cleaning of dust, applying grease to motor, replacing old nut - bolt, motor electrical connectors etc complete all as specified and as directed by Engineer-in-Charge. |
| 124 | M&L for replacement of broken / defective SS wire of size 6 mm 7/19 construction complete, after disconnecting and dismantling the SS rope securely from the high mast alongwith replacing and fixing U-clips, fasteners as required and testing & commissioning complete all as specified and directed by Engineer-in-Charge. |
| 125 | S&F in repair automatic battery charger of 12 / 24 volt, 0-10 Amps / 0-5 Amps charging rate with auto cut off system complete all as specified.Make : Exide / Amron / Luminous / Nicco / AMCO / Amara Raja |
| 126 | S&F PVC insulated 3 core multistranded sheathed cable with 2.5 Sqmm copper conductor for connection of street / security light etc, including taking down complete all as specified and directed.Make:- Havells / KEI / Polycab / RR Kabel Ltd. / HPL |
| 127 | S&F MCCB 4 pole 100 Amp, breaking capacity 16 kA, Ics = 100% Icu, thermal magnetic release type with adjustable overload setting (0.8-1.0 ln), adjustable short circuit setting (6-10 lr)including necessary modification in the panel & taking down existing MCCB complete all as specified and as directed.Make :- L&T / Havells / Panasonic/ Hager / ABB / Legrand / Indo Asian / HPL |
