Visakhapatnam Port Trust has published Tender For Providing Landscape Works Including Electrification Inside Aob Premises In Visakhapatnam Port Authority With 2 Years Maintenance. Submission Date for this Tender is 12-06-2024. Electrification Work Tenders in Visakhapatnam Andhra Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Earth work excavation for foundations (Manual Means) of buildings,septic tank, sump, compound wallin ordinary soils and depositing on bank with an initial lead of 10m and depth up to 3m including all operational, incidental, labour charges such as shoring, sheeting, planking, strutting etc., as required and as directed by Engineer-in-charge, complete. |
| 2 | Earth work excavation for foundations (Mechanical Means) for buildingsin ordinary soils and depositing on bank for all lifts with an initial lead of 10m and depth up to 3m including all operational, incidental, labour charges such as shoring, sheeting, planking, strutting etc., as required and as directed by Engineer-in-charge, complete. |
| 3 | Plain Cement Concrete(1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using 162.0 kgs of cement per 1 cum of concrete, coarse aggregate 40mm sizehard , machine crushedgranite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc., to site, and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc.,as required and as directed by Engineer-in-charge, complete. All labour and materials. |
| 4 | Supply and placing of the V.R.C.C M 20 grade concrete corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of concrete using CONCRETE MIXER with 20mm size HBG graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry and including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water, etc., to site and , centering using Steel scaffolding pipes , jack props , Waller’s , Foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator, curing etc., as required and as directed by Engineer-in-charge, complete but excluding cost of steel and its fabrication charges for finished item of work. All labour and materials. |
| 5 | For Footings |
| 6 | For Pedestals |
| 7 | For Plinth Beam above the basement wall |
| 8 | For columns |
| 9 | For base slab |
| 10 | For 200mm thick side wall |
| 11 | For 150mm thick slab |
| 12 | Random rubble stone masonry in CM (1:8) prop(Cement:Screened sand) using Hard granite stone carted from approved quarry including cost and conveyance of all materials like cement, screened sand, water, Rough stone through stone, coarsed stones etc., from approved quarry, to site, including labour charges for cutting stones to required size and shape, mixing of cement, mortar, construction, curing charges for scaffolding etc., as required and as directed by the Engineer-in-charge, complete. All labour and materials. |
| 13 | Providing High Yield Strength Deformed (HYSD) / Thermo Mechanically Treated (TMT) (Fe 500 / Fe 500D grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., as required and as directed by Engineer-in-charge, complete. All labour and materials. |
| 14 | Carting away of excavated earth / debris to a lead of 10KM (the rate including conveyance charges,loading, unloading charges by Mechanical means ) including ideal hire charges of truck etc. as required and as directed by the Engineer-in-charge, and it includingall operational, incidental ,labour charges, requiredtools, complete.All labour and materials. |
| 15 | Supplying and fixing with cobble stone of size of 100x100x100 mm and any colour of granite stone with hand cut edges / machine cut edges / thumbed edges of flamed / shotblasted finish in proper shapes, and designs as per the directions of Engineer in-charge and fixing in homogeneous or heterogeneous pattern as the colour and pattern shall be as per the drawings furnished by the architect or as per the directions of Engineer in-charge, set over base coat of 30 mm thickcement mortar (1:3) using screened sand over CC bed (1:3:6) already laid, including flushing with net cement slurry of honey like consistency spread @ 3.0 kgs per sqm and joints neatly it including cost and conveyance of all materials like cement, fine aggregate (sand) , water, granite cobble ,wastage etc., to site and including all operations,incidental labour charges such as laying Cement mortar, levelling , fixing cubes in approvedpattern ,jointingand complete for finished item of work, as required and as directed by the engineer-in- chargecomplete. All labour and materials. |
| 16 | Masonry work in CM(1:6) prop(Cement : Screened sand) in superstructure with fly ash cement / lime solid blocks of size 290mm x 225mm x 140mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site,and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc., as required and as directed by the engineer-in- chargecomplete. All labour and materials. |
| 17 | Providing cladding to wall with High Polished Granite16 to 18 mm thick up to 8"-00 (2.43 M) other than black and regular colours, length equal to flooring slabs set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., as required and as directed by the Engineer-in-charge, Complete.All labour and materials. |
| 18 | Providing 0.5m wide Copingwith 16 to 18mm thick High Polishedgranite up to 8"-00 (2.43 M) other than black and regular colourswith borders and design as per the pattern approved by the Engineer-in-Charge , set over base coat of cement mortar (1:5) , 12mm thick using screened sand over the stone ,Brick masonry or CC bed already laid , including neat grey cement slurry of honey like consistency spread 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads , polishing charges and cost of base coat etc., as required and as directed by the engineer-in- charge complete. All labour and materials. |
| 19 | Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, ,, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., complete. All labour and materials. |
| 20 | Plastering 12mm thick single coat in CM(1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as required and as directed by Engineer-in-charge complete. |
| 21 | Ornamental ceiling plastering 12mm thick single coat in CM (1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as required and as directed by Engineer-in-charge, complete. |
| 22 | Supply & application of one coat water based cement primer of interior grade-I andtwo coats ofacrylic emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/litre for internal walls including cost and conveyance of all materials to site, and all operational, incidental, labour charges etc., as required and as directed by the engineer-in- chargecomplete. All labour and materials. |
| 23 | Filling with carted gravel in pathways, trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, watering and ramming including cost and conveyance of water to work siteand all operational, incidental, labour charges, hire charges of T&Petc., as required and as directed by the Engineer-in-charge,complete. All labour and materials. |
| 24 | Preparation of mounds of various size and shape by available excavated / supplied earth, and breaking clods, watering , dressing etc., as required and as directed by the Engineer-in-charge. All labour and materials excluding cost of red soil, complete. |
| 25 | Transplantation of trees with in a distance of 2km for Girth of trees beyond 90cm and upto 150cm. including excavation around existing tree, pruning of branches, lifting, loading and transportation of existing tree, digging pits for placing tree at new place, adding soil mixture at ( 3:1:1 ratio red garden soil, farmyard manure and river sand) fertilizer, hormones and bio fertilizer to it. Levelled and neatly dressed and disposal of surplus materials from old existing and new sites to designated place. Each tree should be firmly secured to the stake so as to prevent excessive movement, flooding with water, treatment of roots, rope and gunny bags as per direction of the officer incharge. T&P and all required materials shall be arranged by the contractor and nothing extra shall be paid on this account, complete as per direction of Engineer-in-charge.Complete.All labour and materials. |
| 26 | Supply and fixing of C.C. Kerb not less than M30 strength of size 600 X 400 X 110 mm thick with bottom thickness of 110 mm up to height of 350 mm and top width of 50 mm thick chamfering with 45° at starts at 350 mm height to 400 mm height as selected by the Engineer-in-charge from approved source/ factory which is laid on existing CC Bed in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever requiredand including cost and conveyance of all materials & labour charges including transportation from approved source, loading & unloading charges as required and as directed by Engineer-in-charge, complete. |
| 27 | Supply of precast concrete blocks for paving of M-35 grade and thickness not less than 60 mm for Light traffic areas conforming to IS 15658:2006 in all shapes and designs as per the manufacturer"s specification set over the 50 mm thick sand bed with hand roller compaction with joint neatly in homogeneousor heterogeneouspattern as thecolourand pattern shall be as per the drawings furnished by the architect, including cost and conveyanceof allmaterialslike cement,sand, water, tiles, etc., to site including all operational, incidental, labour charges, laying tiles torequiredslopeas directedbytheEngineer- in-charge. Complete. |
| 28 | Hedge / shrub planting:Digging the trench of size 0.3 mtrs. depth, refilling with red garden soil including cost of red garden soil and farmyard manure at 4:1 ratio,internal transportation of plants, planting etc., including the application of fertilizers and pesticides etc., (@ 20 gms/pit/sqmt) and it includingall operational, incidental, labour charges, requiredtools, complete all labour and materials, but excluding the cost of the fertilizers (@ 20 gms/pit/sqmt)and plant material etc., - unit 1 Sqmt of work, as required and as directed by Engineer-in-charge, complete. |
| 29 | Digging of 1x1x1 mtrs. pit, filling with soil mixture of red garden soil, farmyard manure at 4:1 ratio including internal transport, application of fertilizers and chemicals (@ 20 gms/pit/sqmt), internal transportation of plants and planting the plants etc., and it includingall operational, incidental, labour charges, requiredtools, complete. (excluding cost of plant material, fertilizers andchemicals(@ 20 gms / pit/ sqmt)), as required and as directed by Engineer-in-charge, complete. |
| 30 | Bed preparation for Ground cover / Flower beds: Digging the trench of size 150 mm. depth,and Formation of 150 mm. (6") thick of soil mixture at 3:1:1 ratio red garden soil, farmyard manure and river sand, application of fertilizers (@ 20 gms/pit/sqmt) by making smooth surface as per design including cost of soil mixture, filling of the soil mixture and internal transportation etc., and it includingall operational, incidental, labour charges, requiredtools, complete. (excluding cost of plant material, fertilizers andchemicals(@ 20 gms / pit/ sqmt))-unit 1 Sqmt of work, as required and as directed by Engineer-in-charge, complete. |
| 31 | Providing impervious coat to exposed RCC roof slab surfacesof sump , sump side wall, sump bottom slab, in side of septic tank , in sunken slabs etc. to required slopes with CM (1:3) prop. using screened sand 12mm thickmixed with integral cement water proofing liquid confirming to IS: 2645-2003 manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm where ever necessary including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, , and operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., as required and as directed by the Engineer-in-charge, complete. |
| 32 | Supply and fabrication of stainless steel framed structure by using Pipe sectionas per IS 6913304 Grade Sch-40s, for framed structure like Window Grills, Compound Wall Grills, Doors, Windows, Gates and cost of welding rods, power charges, labour charges for cutting, placing, welding and erecting in position and fixing by using chain pulley blocks, derek pole arrangements and cranes,cost & convenience of all materials including wastage to site and complete for finished item of work, as required and as directed by Engineer-in-charge, complete. |
| 33 | Supply & Deliveryoftopiary/trees/Palms/shrubs/lawn/ ground coversand specified plants as per directions of officer in charge at siteincluding cost of plants plants of bag size 7" x 8" of plant height not less than 1.0 feet, 8" x 10" of plant height not less than 3.0 feet, 13" x 13"ofTree/Palm height not less than 5 feet, 13" x 13"of plant (Hedges & Shrub) height not less than 2 feet, 15" x 16" of plant (Tree/Palm/Topiary) height not less than 5 feet, 18" x 18" plant (Tree/Palm/Topiary) height not less than 6 feet, bottom dia of the stem is 0.75"" and above, 21" x 21" and above plant (Tree/Palm/Topiary) height not less than 7 feet, bottom dia of the stem is 1"" and above. Heights mentioned above are excluding bag height. All the plants supplied shall be with sturdy stem, well formed crown, vigorously growing tip, healthy foliage without any infestation and the plants shall be supplied after proper hardening off. the rates inclusive of cost of plantscomplete for finished item of work, as required and as directed by Engineer-in-charge, complete. |
| 34 | Hymenocallis Littoralis(13"x13") |
| 35 | Ipomea batatus margarita (7"x8") |
| 36 | Ixora chinensis(13"x13") |
| 37 | Heliconia psittacorum (13"x13") |
| 38 | Pandanus veitchii(13"x13") |
| 39 | Pisonia alba (13"x13") |
| 40 | Techomaria capensis (13"x13") |
| 41 | Wedelia trilobata(8"x10") |
| 42 | Murraya paniculata (13"x13") |
| 43 | Tabernamontana divaricata (13"x13") |
| 44 | Polyscias fruticosa (green,gold,variegated) (13"x13") |
| 45 | Tradescantia spathacea(7"x8") |
| 46 | Techoma stans (21"x21") |
| 47 | Lantana sellowiana (bag size 7"x8") |
| 48 | Lantana sellowiana (bag size 13"x13") |
| 49 | Dypsis lutescens(13"x13") |
| 50 | Plumbago auriculata(13"x13") |
| 51 | Cymbopogon martinii (7"x8") |
| 52 | Chrysanthemum cinerariaefolium(7"x8") |
| 53 | pelargonium graveolens (7"x8") |
| 54 | Anthocephalus chinensis(21"x21") |
| 55 | Butea Monosperma (21"x21") |
| 56 | Erythrina variegata(21"x21") |
| 57 | Dalbergia sissoo(21"x21") |
| 58 | Tectona grandis (21"x21") |
| 59 | Terminalia arjuna (21"x21") |
| 60 | Ficusbengalensis (21"x21") |
| 61 | Pongamia pinnata (21"x21") |
| 62 | Azadirachta indica (21"x21") |
| 63 | Jatropha integerrima (13"x13") |
| 64 | Mimusops elengi (21"x21") |
| 65 | Bahunia blackeana (purple) (21"x21") |
| 66 | Wodyetia bifurcata(21"x21") |
| 67 | Lagerstroemia speciosa (21"x21") |
| 68 | Cassia fistula (yellow) (21"x21") |
| 69 | Acalypha wilkesina (red) (13"x13") |
| 70 | Korean grass |
| 71 | Loading and unloading of plants bag size (21"X21") at site of work and stacking for lead less upto 50 m andincluding labour charges, T&P etc., as required and as directed by Engineer-in-charge, complete for finished term of work. (excluding cost of plant bag) |
| 72 | Loading and unloading of plants bag size (13"X13") at site of work and stacking for lead less upto 50 m andincluding labour charges, T&P etc., as required and as directed by Engineer-in-charge, complete for finished term of work. (excluding cost of plant bag) |
| 73 | Loading and unloading of plants bag size (7"X8") at site of work and stacking for lead less upto 50 m andincluding labour charges, T&P etc., as required and as directed by Engineer-in-charge, complete for finished term of work. (excluding cost of plant bag) |
| 74 | Transportation of bag plants form Kadiyam to AOB in VPA ( Actual payment will paid for the actual work donesubjected to approval of the weight by the competent authority )as required and as directed by Engineer-in-charge, complete. |
| 75 | Supply and fixing of tensile fabric, type-I, having 900 GSM, 3500N/mm² of tensile strength, sioen make, having size of 36mx14m and height to suit at site requirement, usingPolyvinylidene Fluoride (PVDF) coating on both sides over the existing fabric including proper design and build pattern using suitable materials like Circular/ Rectangular/ Square Hollow section MS pipes, shall be painted with base and finishing coats. The cost inclusive of loading, unloading, making, installation, transportation of materials and handling, all labour, materials & lift charges etc., complete. |
| 76 | Supply & Fixing Sadarhalli granite stone with 5 line dressing Double Patti of 5" length seating benches with back rest and its width 16""with 4" thick and 18" height with 4" thick and leg size4"" width, including cost and conveyance ofall materialslike granite benche, cement, sandto work siteloading ,un loading transport and all operational, incidental labour & lift charges,and overheads & contractors profit complete for finished item, as required and as directed by Engineer-in-charge, complete. |
| 77 | Bed preparation for Korean/Mexican: Dressing the surface to the desired shape, laying of 150 mm. (6”) thick fine red garden soil, covered with a thin layer of 10 mm thick sand, watering, rolling (compacting to 4" thickness by hand roller), including the cost of red garden soil, sand and labour charges etc., for complete bed preparation and laying and ramming of lawn mats / rolls in proper position on existing prepared bed by internal transportation from dumped place, including cost of labour for laying, ramming by hand roller / demesha, internal transportation and watering etc., and it includingall operational, incidental, labour charges, requiredtools, excluding cost of grass, fertilizers and chemicals etc., for 1 Sqm (Red garden soil in this context it is defined as sandy loamy garden soil congenial for plant growth which shall be of light textured, crystalline, porous and friable, fertile, slightly acidic or neutral), as required and as directed by Engineer-in-charge, complete. |
| 78 | Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, hedge, flower beds, foliages, creepers etc. including watering, weeding pruning, replacement of plants, gap filling, hoeing, mowing of lawn, grass cutting by lawn mover and brush cutter , removal of garden waste, applying insecticide, pesticide & fertilizers(whenever required) top dressing of lawn with good earth and menure and maintenance of other garden related works as directed by office-in-charge, excluding cost of water, Manure, Fertilizer, Insecticide, Pesticide, lawn mover and brush cutter with fuel. All labour and materials. |
| 79 | Supplying and transportation of potable water in lorry/tankers having capacity 20KL including erection of suitable mechanical equipment (motor pumps) at backside of the tanker including necessary sprinkling arrangements with control valves filling and delivery of water at site of work crew changes, fuel charges, waiting charges, hire charges, hose pipes, taxes if any and with all equipment and erection charges etc, as required and as directed by the engineer-in-charge complete. All hire and operational charges (water will be supplied by VPA) |
| 80 | Supply of fertilizers/pesticides at the site of work as required and as directed by horticulture division/ Engineer-in-charge, complete. including cost of all materials and labour charges |
| 81 | Urea |
| 82 | Potash |
| 83 | Chlorpyrifos spray @ 2ml per lit water |
| 84 | Replacement of casualities including plant and plantation cost @5% during first year, |
| 85 | Replacement of casualities including plant and plantation cost @ 3% during second year |
| 86 | Supply of 3 ½ core 50 Sq.mmXLPE insulated, 1100V grade armoured alluminium cable as per pecification confirming to IS:7098(Part - I)./1554-I.As required and as directed by the Engineer in charge. All labour and materials complete. Makes : Torent / Havells / KEI /Gloster/Finecab / Polycab /RR Kabel |
| 87 | Supply, fixing, testing and commissioning of 6 watt neon flex strip lighting belt/piping type including suitable driver units, clamps, Power Cord Set Suitable for AISL03 with end caps as required and as directed by the engineer-in-charge complete with all material, labour tool and tackles. Make: Phillips/Jaquar/Crompton/Helonix/AKARUI |
| 88 | Supply of 12 watts LED flood light fittings warm white light surface / pole mounting extended pressure die cast aluminium enclosure with clear tempered glass IP65 protection input voltage:100-264V AC, 50/60Hz frequency LED efficiency of 90-110 Lumens/watt with beam angle of35 degrees.As required and as directed by the Engineer in charge. All labour and materials complete. Make: Crompton / Bajaj / Havells / Halonix / Philips / GE / Wipro / Klite / KSP/Akarui |
| 89 | Supply of 3core 2.5 Sq.mmXLPE insulated, 1100V unarmouredmuilt strandcopper cable as per IS specification confirming to IS:7098(Part - I)./ 1988.As required and as directed by the Engineer in charge. All labour and materials complete. Makes : Torent / Havells / KEI /Gloster/Finecab / Polycab /RR Kabel |
| 90 | Layingof 3½ core x 50 Sq.mm armoured aluminuim conductor cable in thetrench including excavation with Sand Cushioning and protective coveringon either side and top of the as directed by Engineer-in-charge complete with all materials Note: Cable shall be supplied by VPA at free of cost |
| 91 | Supply and making end termination with heavy Alluminium lugs (pin/ ring type) as per IS specification duly crimped with crimping tool, PVC tape etc of following size of 50 sqmm Makes :Dowels /Jainson/Comet inlcuding cost of material and conveyance to work spot etc completeas required and as directed by the Engineer-in-charge. |
| 92 | Supply, fixing connecting and commissioning of LT 3 phase and neutral, floor mounted, outdoor type Double door feeder pillar panel of size 1.0mtr. x 1.0 mtr x 0.6 mtr.(approx), made of 14 SWG sheet steel, with dust and various proof IP 55 protection with 2 coats ofapproved shade of enamel paint over one coat of red-oxide, thickness of 14 SWG comprising of following switch gear and metering devices of approved brands with suitable bus bar arrangement for 3 phase and neutral (200A rating for each phase and 100A for neutral) complete as directed by Engineer in charge including all labour tools and material. 1) Incomer: 4 pole 415 V, 35/36 KA, 250A, MCCB changeover switch with Thermostatic setting- 1 No 2) Incomer: 4 pole 415 V, 35/36 KA, 250A, MCCBwith Thermostatic setting- 2 Nos 2)Out goings: 1 pole, 415V, 16 KA 63A, MCCB- 12Nos 3a) Panel mountedDigital Voltmeter, Ammeter 3b) LED pilot lamps 230V, 5 Nos SWITCH GEAR BRANDS : ABB/SIEMENS/ HAVELLS/ L&T / C&S/ GE |
| 93 | Supply of Automatic Street Light Control System with Optical Micro Sensor, Low voltage / High voltage trip and reset, operating voltage 150 - 280V AC per Phase, 50 HZ with suitable SMC enclosure of IP 54 protection, MCBs and contactor suitable to control the load of 8KW of Three phase load with necessary clamping arrangements.As required and as directed by the Engineer in charge. All labour and materials complete. Makes: Any reputed brand. |
| 94 | Supply of 3 core 1.5 Sq.mmXLPE insulated, 1100V unarmouredmuilt strandcopper cable as per IS specification confirming to IS:7098(Part - I)./ 1988.As required and as directed by the Engineer in charge. All labour and materials complete. Makes : Torent / Havells / KEI /Gloster/Finecab / Polycab /RR Kabel |
| 95 | Laying and clamping of 1.5sq.mm and 2.5 sq.mm cables on wall/existing pipe with necessary fixing arrangements such as saddles, clapms, wooden separators etc., as required and as directed by the Engineer-in-charge, complete. |
| 96 | Supply and providing of P.C.C. 1:3:6 with 20 mm graded granite as coarse aggregate and river sand as fine aggregate (220 Kgs of cement per M3of finished concrete) including mixing, depositing in position, tamping, finishing and curing for base/pole concreting, road cutting etc. as directed by engineer in charge including all labour and tools. |
| 97 | Excavation of Trenches of required width for laying of GI pipes, cables etc., including dressing of sides, ramming of bottoms, suitable depth including getting out the excavated soil and the returning the soil including consolidating depositing layer as directed by Engineer in charge with all labour tools and tackles Hard / Dense soil etc., complete. |
| 98 | Providing, earth station using 3.0 meters long, 40 mm medium grade G.I. pipe in a masonry enclosure duly filling with alternate 26layers of salt and charcoal complete with GI funnel and covering with RCC cover conforming to IS as directed by Engineer in charge including all labour and material. |
| 99 | Breaking of PCC /removing ofCC blockwith out any damage and re-laying of the same directed by Engineer in charge including all labour tools and tackles. |
| 100 | Supply and laying 25 mm X 6 mm G.I strip as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)As required and as directed by the Engineer in charge. All labour and materials complete. |
| 101 | Supply and Laying / clamping of 50 mm dia HDPE pipe of PE 100 Grade confirms to ISI in the existing in trench complete as directed by Engineer in charge including all labour and material. Make: Tulasi / Sudhakar / Nandi |
| 102 | Fixing of LED luminaire (Down lights / Mirror optic / Ornamental type fitting with all necessary accessories in false ceiling / on wall / inground including giving connections and all labour charges etc., as required and as directed by the Engineer-in-charge complete. |
| 103 | Supply of Urban decorative LED Inground luminar burial light - Body frame constructed in grade 316 stainless steel , Rated Power: 9Watts, Dimension: Dia 120*90mm H, LED chip: CREE, Light Source : SMD, Material: ALUMINIUM+Toughened Glass, Body colour: DARK GREY, CCT:3000K, CRI: >80, Beam Angle : 45º, Lumen Efficacy : 90-100lm/W,Control Gear tightness: IP67, Input Voltage : 220v - 240v - 50Hz, Electrical Class : I, with all necessary accessories.As required and as directed by the Engineer in charge. All labour and materials complete.Make:K-Lite /Wipro/Osram/Phillips/AEC/Heper/Jaquar/AKARUI |
| 104 | Supply LED Flood Light fixtures are a direct replacement for Conventional HID fixtures. The fixture consumes very less watts, reducing your energy consumption up to 80% of your current use. Our product utilizes uniformly distributed LM 80 certified SMD LEDs that eliminates a uniform lighting effect, giving you clean crisp light output, while producing 90-100 lumens / Watt. Die cast aluminum housing electrostatically sprayed with a powder paint finish, following anti-corrosion priming. Toughened Glass cover concealed with high temp resistance silicon rubber gasket.Isolated constant current driver compliance to IS:15885 Pt-2/Sec13 Up to 50% energy saving Driver efficiency > 85% , full load THDi < 10% Over current, over voltage & short circuit protection Surge suppression Protection 5KV Operating voltage range 120 - 280V at 50Hz Average light source life span up to 50,000 burning hours (L70B50) Optical Solution with 120° wide beam angleWorking ambient temperature - 10°C~ + 55°C. PF=0.95, input voltage 220v-240v-50Hz, Power 30W, Color Temp:6000k+/-300k, CRI>80.As required and as directed by the Engineer in charge. All labour and materials complete. Make: K-Lite/Wipro/Osram/Phillips/AEC/Heper/Jaquar/AKARUI |
| 105 | Supply of 150 watts LED flood light fittings warm white light surface / pole mounting extended pressure die cast aluminium enclosure IP65 protection input voltage:100-277V AC, 50Hz frequency LED efficiency of > 120 Lumens/watt with beam angle of >120 degrees with 03 years warranty.As required and as directed by the Engineer in charge. All labour and materials complete. Make: Crompton / Bajaj / Havells / Halonix / Philips / GE / Wipro / Syska / KSP/Akarui |
| 106 | Providing, installation, testing & commissioning of water curtain nozzle 15mm dia nickel chrome plated brass, BSPT, K-factor as per design consideration complete as required.As required and as directed by the Engineer in charge. All labour and materials complete. Makes: Any reputed brand. |
| 107 | Supply, installation, testing and commissioning of 25mm dia Ball valve.As required and as directed by the Engineer in charge. All labour and materials complete. Makes: Any reputed brand. |
| 108 | Labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, adoptors, pump guards etc with solvent jointing as per standard practice etc., as required and as directed by the engineer-in-charge. All labour and materials complete. |
| 109 | Supply and erecting approved make centrifugal water pump with impeller, priming funnel cork, companion metallic flanges, with bolts and nuts and mounted on a common shaft of high efficient squirrel cage Induction motor totally enclosed and fan cooled type suitable to operate on 230V, Single phase, 50Hz.. 1440 RPM A.C.Supply of 1HP exculding suction / delivery pipe with nuts duly grouted on existing C.C foundation and bolts, spring washers of requisite size for monoblock motor and pump (IS : 9079) etc., as required and as directed by the Engineer-in-charge, all labour and materials, complete. |
| 110 | Supplying, installation, testing & commissioning of deluge valve (to be used for water curtains) UL listed with wet pilot basic trim assembly for DVA with test and alarm, drip and drain valve with water motor gong complete as required. Makes: As per list of recommended brands. 150mm dia.As required and as directed by the Engineer in charge. All labour and materials complete. |
| 111 | Supply and delivery of 48 / 40mm UPVC pipe with standing upto 20 Kgs / CM2 upto 200 Mts for submersible motors with both ends square threaded, with rubber "O" rings with smooth inner surface which can take the minimum load of 2100 to 4000 Kgs weights.As required and as directed by the Engineer in charge. All labour and materials complete. Makes: Any reputed brand. |
| 112 | Supply and delivery of heavy duty couplings 48/40 mm UPVC pipe (27 Kgs / CM 2 ) capable of with standing up to 27 Kgs / CM2 above 200 mts and upto 300 mts.As required and as directed by the Engineer in charge. All labour and materials complete. |
| 113 | Supply and Delivery of pump guard assembly with 2Nos SS Powder coated flange and 2Nos SS Rods with nut and colter pin. As required and as directed by the Engineer in charge. All labour and materials complete. Makes: Any reputed brand. |
| 114 | Fabrication , transportation and supply of suitable size panel board for single phase submersible motor up to 1.5 HP consisting of relay, Contactor, starting and running capacitors, Voltmeter, Ammeter, indicator lamps, MCB , on/off switch including supply and fixing of DOL starter of complete, as directed by Engineer in charge. All labour and materials complete. Makes: Any reputed brand. |
| 115 | Supply and fixing of 15-20W beacon deco diamond laser cut decorative LED Bollard made of hot dip Galvanized square pipe of size 150*150mm*1000mm height and 3mm thickness. Base plate of 230*230*10mm. The build in constant current class 1 LED driver certified with IS15885 Pt2/sec 13,PF>0.95, THD<10%, IP66, LM:80 cirtified LEDs. Ingress Protection Range: IP66, Working Voltage : AC230V, Rated Power :15W-20W, CCT, CRI>70. Complete bollard to be certified to IS 10322 part 5/Sec 3 :2012 and latest amendmends, LED COLOUR : 3000K-3300K, with all necessary accessories including comissioning. As required and as directed by the Engineer in charge. All labour and materials complete. Make: K-Lite /Wipro/Osram/Phillips/AEC/Heper/Jaquar/AKARUI |
| 116 | Supply and fabrication of steel by using suitable flats, angles, heavy gauge mesh,sheets, channels of required sizes to provide suitable enclosure box with stand to safe guard flood light fitting, back clamps, including cutting, bolting, riveting, drilling, welding etc. including providing one coat of zinc rich epoxy paint primer and high quality enamel paint finish coat complete as directed by Engineer in charge. All labour and materials complete. |
| 117 | Excavation of Bituminous road (BT road surface) by chiselling for preparing pit for poles / stay / earth plates / laying pipes, including clearing the site by removing debris and making the site to original position etc., as required and as directed by the engineer-in-charge.All labour and materials complete. |
| 118 | Excavation of WBM under BT surface by chiselling for preparing pit for poles / stay / earth plates / laying pipes, including clearing the site by removing debris and making the site to original position etc., as required and as directed by the engineer-in-charge.All labour and materials complete. |
| 119 | Spraying of bitumen over cleaned dry surface of crushed cement concrete base at the rate of 25 kg per 10 sqm by a bitumen pressure distributor, spreading of key aggregates at the rate of 0.13 cum per 10 sqm by a mechanical grittier and rolling the surface as per clause 506.3.8 MORTH etc., as required and as directed by the engineer-in-charge, all labour and materials complete. |
| 120 | Flooring with vitrified tiles of 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., size 600mm*600mm or as required and as mentioned by the engineer-in-charge, all labourcomplete, including seigniorage charges, etc., complete for finished item of work. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
