}

Tender For Repairs To Joinery, Att, Railing And Staircase Work At Wed, Ashoka Park, Pallava Park And Ctw, Nsb Under Age B/R-Iii Of Ge (Nd) Visakhapatnam, visakhapatnam-Andhra Pradesh

Military Engineer Services-MES has published Tender For Repairs To Joinery, Att, Railing And Staircase Work At Wed, Ashoka Park, Pallava Park And Ctw, Nsb Under Age B/R-Iii Of Ge (Nd) Visakhapatnam. Submission Date for this Tender is 19-06-2024. Civil Work Tenders in visakhapatnam Andhra Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

43439886
Corrigendum : Tender For Repairs To Joinery, Att, Railing And Staircase Work At Wed, Ashoka Park, Pallava Park And Ctw, Nsb Under Age B/R-Iii Of Ge (Nd) Visakhapatnam
Open Tender
Indian
Andhra Pradesh
visakhapatnam
19-06-2024

Tender Documents

Additional Details Available on Click
✓ Tendering Authority
✓ Publication Document
(Tender Document / Tender Notice )

Tender Details

Tender For Repairs To Joinery, Att, Railing And Staircase Work At Wed, Ashoka Park, Pallava Park And Ctw, Nsb Under Age B/R-Iii Of Ge (Nd) Visakhapatnam

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 12-Jun-2024 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 19-06-2024

Key Value

Document Fees
INR 500 /-
EMD
INR 80000.0 /-
Tender Value
INR 40 Lakhs /-

Attachment

FileName File Description File Size
d170451b-3464-45f7-9096-88498bef1b9a.html Tender Notice 0 KB
8385Tender.pdf Tender Document 0 KB
BOQ_733322.xls Tender Document 0 KB
Tendernotice_1.pdf Tender Document 0 KB

BOQ Items

Name of Work: Repairs to joinery, ATT, Railing and Staircase work at WED, Ashoka Park, Pallava Park and CTW, NSB under AGE B/R-III of GE (ND) Visakhapatnam
Sl. No. Item Description
1SCHEDULE"A" PART-I: (B/R WORKS)
2Taking down Chowkats or frames not exceeding 1.5 Sq. M each (Without taking off shutters from the frames) and removing them to store all as specified and as directed.
3Taking down Chowkats or frames exceeding 1.5 Sq. M but not exceeding 4 Sq. M each (Without taking off shutters from the frame)and removing them to store all as specified and as directed.
4S & F for soild PVC Door frame of size 50 mm x 47 mm made out of 5 mm palin colour PVC sheet reinforced with MS square tube, suppling and fixing in opening as per specification and drawing.
5S & F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails.M.S frame shall bw covered with heat moulded plain colour PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and botom rail on either side & as gap insert for tip rail & bottom rails; Panelling of plain colour PVC sheet to be fitted in the MS frame weloded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement. suppling and fixing in the frame at site as per specification & drawing.
6S & F facroty made Second class hard woodkiln seasoned and chemically pressure treated plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints.
7S & F 35 mm thick factory made Second class hard woodkiln seasoned and chemically pressure treated Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc.
8S & F 35 mm thick factory made second class hard wood, kiln seasoned and chemically pressure treated plain framed, panelled shutter (Two panel) with lock rail and panel of 9 mm BWP Commercial ply or 12 mm veneered particle board with commercial face veneers on both faces or 10 mm bison panel.
9S&F 40 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides and fitted to chowkhat complete all as specified and directed .
10S & F Aluminium Powder Coated Sliding Window Frame and Shutters with 91 x 42 x 2 mm thick Three Track section for frames and 39.4 x 17.7 x 2 mm thick Sliding Section for Shutter Frame all round includingnecessary Joining Cleats, Glazing Clips, Neoprene Rubber Packing, Powder Coated Aluminium Snap Beading, Screws, Powder Coated Aluminium Fittings such as Locking Arrangement [1 No], Suitable Handle [1 No] per shutter including glazing with 5 mm thick Tinted Glassand Stainless steel wire cloth / mesh with average aperture not exceeding 1.40 mm and dia of wire 0.36 mm complete all as specified and as directed. Note:-Aluminium grills shall be measured and paid separately.
11S& F aluminum frame work for grill, deco grill model DG-104 with 10 mm thick flat matt design making scope and level and fixed in 30 x 12 x 5 mm channel complete and necessary fixing arrangements etc complete all as specified and as directed.
12M&L for PVC ventilator made out of multi chamber PVC hollow section DWUF 405 (40x6mm) with 3 mm pin headed glass fixed to the lower section using extruded pvc section of 9x19.5 mm size OL19 with EPDM gasket (SPL 003) for both PVC sections. Ventilator"s center mullion shall be made up of muti chamber hollow pvc section DWUF-406 (63.5mmx40mm) with EPDM gasket is used. GL19 is fixed to the 3 sides of DWUF-405 and DWUF-406 (63.5x40mm) above the center mullion. Glass panels with aluminum lower set is fixed to the frame DWUF-405 on the top of the ventilator for the glass.DWUF 405 and and DWUF 406 corners shall be metre cut and welded, jointed with 12 mm MS rods (guard bars) and necessary fixtures including necessary fixing arrangments and aluminum mosquito proof wire mesh of aperture 1.40 and dia of wire 0.36 mm complete all as specified and as directed.
13Preparing surfaces of wood and wood based materials and treating ends of posts, backs of chowkats, etc. area tarred exc 0.1 Sq.m and not exc 0.5 Sq.m each with tar or coal tar black paint.
14M&L for providing and injecting chemical emulsion for post constructional Anti-termite Treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and as directed.
15M&L for Plain Cement Concrete Type B1 1:2:4 (using 20 mm graded granite stone aggregate) as in hold fast.
16S&F mild steel flat iron of size 25x3mm as in hold fast
17Supply & fixed glavanized mild steel wire cloth with 0.46 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and directed.
18S & F100 mm long medium weight, cold rolled SS Butt hinges all as specified and as directed..
19S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised.
20S & F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section
21S & F 100 mm long Aluminium, anodised, barrel tower bolts of extruded section
22S & F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy.
23S & F in repair mild steel 300mm ordinary rat tail rod pattern spring including roller and roller plate complete.
24Forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, with cement mortar 1:4 complete all as specified and as directed.
25Preparation of new or previously treated wood surfaces of any description, over 10 cm width or girth, not otherwise described appling two coats of synthetic enamel paint over a coat of primer all as specified and as directed.
26S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor having over all cover plate length of 140 mm all as specified and as directed.
27S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as directed (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)
28S&F Factory made soild PVC profiled panel door shutter 28mm thick with integral skin as frame & 3mm thick high pressure compact laminate on both side of approved colour as infill, with "C type Gl or 40 x 20 x19 of MS pipe as stiffner & supplying & fixing in frame at site as per specifications.
29S & F Aluminium Anodised Hasp and Staple, including bolt to hing plate and fixed with screws 100 mm size
30S & F30 mm flap Continuous (piano) hinges, brass, bright finish or electrogalvanised all as specified and as directed.
31Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. all as specified and as directed.
32M&L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified and as directed.
33S&F in repairs 20 mm dia stainless steel cutain rod fixed with necessary screws including brackets at ends all as specified and as directed.
34Material and labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels plates etc., including welding, grinding, buffing,polishing and making curvature (whereever required) and fitting the same with necessay stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless less steel bolts etc., of required size, on the top of floor or the other side of waist slab with suitable arrangement complete all as specified and as directed.
35Demolition of Cement Concrete (Unreinforced) of any description and in any position not otherwise specifically provided for all as specified and as directed.
36M&L Providing, cement concrete Type B1 1:2:4 ( using 20 mm graded aggregate ) as inparapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed
37M&L Washing rubbing down and stopping of distempered surfaces any type of wall upto 4th floor incl preperation and then applying one coat of oil bound distemper on old plastered surface by Auto roller of any tint specified by Engineer -in-Charge.
38M&L for preparation of newly plastered surfaces of wall upto 4th floor by Vaccum based sanding machine applying 3mm wall care putty (Multipurpose mixer shall be used for uniform and poper mixing of putty ) and applyingtwo coats ofemulsion distemper white or colouredover a coat of alkaline resistant primer by auto roller complete all as specified and directed as per manufacturetr instruction.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail