Military Engineer Services-MES has published Tender For Repair To Steel / Map Furniture And All Type Charpoy Gi / Charpoy Map At Af Stn Palam Under Ge (Af) Palam Delhi Cantt - 10. Submission Date for this Tender is 18-06-2024. Furnitures Tenders in palam Delhi. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 31-May-2024 | CORRIGENDUM NO 1 | Terms and Conditions | 11-06-2024 |
| 2 | 11-Jun-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 18-06-2024 |
| FileName | File Description | File Size |
| 4790c60d-acc5-404c-8195-6ca2b94a59b4.html | Tender Notice | 0 KB |
| 16TENDER.pdf | Tender Document | 0 KB |
| BOQ_733227.xls | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Almirah steel Medium and Small FD-243 & FD-1032 M&L for for shelfof ALMIRAH STEEL medium made out of 1.0mm thick mild steel sheetand made to shape and size as shown in drawing No. FD-243 & FD-1032 including necessary preperation of surfaces and applying two coats of synthetic enamel paint (as approved) by spray painting machine over a coats of red oxide primer including taking out unserviceable shelf complete. |
| 2 | All as per item No. 1 above but door of Almirah steel medium. |
| 3 | All as per item No. 1 above but legof Almirah steel medium. |
| 4 | All as per item No. 1 above but locking device of Almirah steel medium. |
| 5 | M&L for for lockof ALMIRAH STEEL medium and fixing to almirah as shown in drawing No. FD-243 & FD-1032 including taking out unserviceable lockcomplete. |
| 6 | M&L for for mild steel handle (as approved) of ALMIRAH STEEL medium and fixing to almirah as shown in drawing No. FD-243 & FD-1032 including taking out unserviceable handle complete. |
| 7 | M&L for for mild steel hinge (as approved) 75mm in size suitable for ALMIRAH STEEL medium and fixing to Almirah as shown in drawing No. FD-243 & FD-1032 including taking out unserviceable handle complete. |
| 8 | M&L for for preperation of old surfaces of Almirah steel medium (drawing No. FD-243 & FD-1032) by sand paper/scrapper and applying two coats of OG synthetic enamelled paint over a coats of red oxide primer by spray painting machine on external and internal surface of almirah including shelfs complete. |
| 9 | Almirah steel large FD-1031 & FD-67 M&L for for shelfof ALMIRAH STEEL large made out of 1.0mm thick mild steel sheetand made to shape and size as shown in drawing No. FD-67 & FD-1031 including necessary preperation of surfaces and applying two coats of synthetic enamel paint (as approved) by spray painting machine over a coats of red oxide primer including taking out unserviceable shelf complete. |
| 10 | All as per item No. 9 above but door of Almirah steel large. |
| 11 | All as per item No. 9 above but legof Almirah steel large. |
| 12 | All as per item No. 9 above but locking device of Almirah steel large. |
| 13 | M&L for for lockof ALMIRAH STEEL large and fixing to almirah as shown in drawing No. FD-67 & FD-1031 including taking out unserviceable lockcomplete. |
| 14 | M&L for for mild steel handle (as approved) of ALMIRAH STEEL large and fixing to almirah as shown in drawing No. FD-67 & FD-1031 including taking out unserviceable handle complete. |
| 15 | M&L for for mild steel hinge (as approved) 75mm in size suitable for ALMIRAH STEEL large and fixing to Almirah as shown in drawing No. FD-67 & FD-1031 including taking out unserviceable handle complete. |
| 16 | M&L for for preperation of old surfaces of Almirah steel large (drawing No. FD-67 & FD-1031) by sand paper/scrapper and applying two coats of OG synthetic enamelled paint over a coats of red oxide primer by spray painting machine on external and internal surface of almirah including shelfs complete. |
| 17 | Chair Verandah FD-256 & FD-19/259 M&L for for welding (full round of pipe as a one spot) ofbroken part of CHAIR VERANDAH as shown in drawing No. FD-19, FD-256 & FD-259, rubbing welded portion to obtain a smooth surface, necessary preperation of surfaces and applying two coats of (white colour) synthetic enamel paint (as approved) by spray painting machine over a coats of red oxide primercomplete. |
| 18 | M&L for for removing of old leg/ frame part ofCHAIR VERANDAH and S&F new part/legportion made of 20 mm dia mild steel pipe of 1.6 mm wall thickness as perdrawing No. FD-19, FD-256 & FD-259 and welded, necessary preparation of surfaces and applying two coats of (white colour) synthetic enamel paint (as approved) by spray painting machine over a coats of red oxide primercomplete. |
| 19 | M&L for for mild steel round bar 12mm dia to cover the distance between RT & LT legalongwith the seat front, side orrear side of CHAIR VERANDAH as shown in drawing No. FD-19, FD-256 & FD-259 and welded, necessary preparation of surfaces and applying two coats of (White Colour) synthetic enamel paint (as approved) by spray painting machine over a coats of red oxide primer including taking out unserviceable bar complete. |
| 20 | S&F for HARD RUBBER SHOE superior quality (as approved) fixing to legof CHAIR VERANDAH as shown in drawing No. FD-19, FD-256 & FD-259 including taking out unserviceable shoe complete. |
| 21 | M&L for for re-canning of CHAIR VERANDAH in Godrej pattern with 4.0mm wide half round oval shape plastic cane (as approved) to frame as shown in drawing No. FD-19, FD-256 & FD-259 including taking out old/worn out canning complete. |
| 22 | M&L for for removing/scrapping old worn out paint from steel frame of CHAIR VERANDAH (drawing No. FD-19, FD-256 & FD-259) by sand paper/scrapper and applying two coats of white colour synthetic enamelled paint (as approved) by spray painting machine complete. |
| 23 | M&L removing of old PVC seat and back ofCHAIR VERANDAH and S&F new PVC seat and back as perDrawing No. FD/MAP-II/06 complete all as specified and as directed. |
| 24 | Chair CBA steelwith arms FD-75(m) M&L for for SEAT FRAME of CHAIR CBA STEEL WITH ARMS made out of second class hardwood fixed with 4 Nos of machine screw 75mm x3.0mm and painting with black colour synthetic enamelled paint (as approved) on seat frame, canning with superior quality of plastic cane 2.0mm half round oval shape for seat and 3.0mm for border as shown on drawing No. FD-75(M) including taking out unserviceable seat frame complete. |
| 25 | All as per item No 24 above but for BACK FRAME of CHAIR CBA STEEL WITH ARMS. |
| 26 | All as per item No 24 above but for arm rest of CHAIR CBA STEEL WITH ARMS. |
| 27 | M&L for for mild steel flat Iron 25mm x 3.0mm as RUNNER of length 350mm (approx), making hole for fixing end and other end welded to CHAIR CBA STEEL with ARMSsize35x25x3 mm and applying two coats of synthetic enamel paint over a coats of red oxide zinc chrome primer on steel surfaces as shown on drawing No. FD-75(M) including taking out unserviceable runner complete. |
| 28 | S&F for PVC CAP at the top of back steel pipe of CHAIR CBA STEEL WITH ARMS as shown on drawing No. FD-75(M) including taking out unserviceable cap complete. |
| 29 | S&F for HARD RUBBER SHOE superior quality (as approved) fixing to legof CHAIR CBA STEEL WITH ARMS as shown on drawing No. FD-75(M) including taking out unserviceable shoe complete all as specified and as directed. |
| 30 | M&L for removing/scrapping old worn out paint from exposed steel frame of CHAIR CBA STEEL WITH ARMS (drawing No. FD-75(M)) by sand paper/ scrapperand applying two coats of synthetic enamelled paint (as approved) by spray painting machine complete all as specified and as directed. |
| 31 | Chair Computer and Chair Revolving Various types TP M&L for for TAPESTRY/FABRIC CLOTH over synthetic FOAM 50 to 75 mm thick (as approved) for SEAT/BACK of CHAIR COMPUTER/ CHAIR VISITOR/ CHAIR REVOLVING including taking out old worn out Tapestry/ Fabric Cloth and Foam from Chairs complete all as specified and as directed. |
| 32 | M&L for for CASTOR WHEEL (as approved) of CHAIR COMPUTER/ CHAIR VISITOR/ CHAIR REVOLVING including taking out unserviceable or broken Castor Wheel from Chairs complete all as specified and as directed. |
| 33 | M&L for for stainless steel BOTTOM BASE (as approved) of CHAIR COMPUTER/ CHAIR VISITOR/ CHAIR REVOLVING including taking out unserviceable bottom base from chairs complete all as specified and as directed. |
| 34 | M&L for for GAS LIFTING HYDROLIC SYSTEM of CHAIR COMPUTER/ CHAIR VISITOR/ CHAIR REVOLVING including taking out unserviceable Gas Lifting Hydrolic System from Chairs complete all as specified and as directed. |
| 35 | M&L for for handle of CHAIR COMPUTER/ CHAIR VISITOR/ CHAIR REVOLVING including taking out unserviceable handle from chairs complete all as specified and as directed. |
| 36 | Chair School with Hand Board FD-140/ FD-48/ FD/E6/MAP/05 M&L for for moulded PVC/wooden seat and backof CHAIR SCHOOL WITH HAND BOARD as shown on drawing No. FD/E6/MAP/05/ FD-140/ FD-48 including taking out unserviceable seat back complete. |
| 37 | M&L for for welding of broken legwith mild steel round pipe of size 20mm x 1.6 mm thick (as required) for CHAIR SCHOOL WITH HAND BOARDas shown on drawing No. FD/E6/MAP/05/ FD-140/ FD-48, necessary preperation of surfaces, applying two coats of (OG) synthetic enamel paint (as approved) by spray painting machine over a coats of red oxide primer complete. |
| 38 | M&L for for removing/scrapping old worn out paint from CHAIR SCHOOL WITH HAND BOARD(drawing No. FD/E6/MAP/05/ FD-140/ FD-48) by sand paper/ scrapperand applying two coats of OG synthetic enamelled paint (as approved) by spray painting machine complete all as specified and as directed. |
| 39 | M&L for for welding (full round on pipe as a one spot) ofbroken part of CHAIR SCHOOL WITH HAND BOARD as shown on drawing No. FD/E6/MAP/05/ FD-140/ FD-48, rubbing welded portion to obtain a smooth surface, necessary preperation of surfaces and applying two coats of synthetic enamel paint (as approved) by spray painting machine over a coats of red oxide primer including taking out unserviceable part complete all as specified and as directed. |
| 40 | Locker Bed side Steel FD-257/1029 M&L for for shelf made out of 1.0mm thick mild steel sheet of LOCKER BED side STEEL and made to shape and size as shown on drawing No. FD-257 & FD-1029, applying two coats of (OG) synthetic enamel paint (as approved) by spray painting machine over a coats of red oxide primer including taking out unserviceable shelf complete. |
| 41 | All as per item No 40 above but for door. |
| 42 | All as per item No 40 above but for leg. |
| 43 | M&L for for aluminum hasp and stapleof size 100mmfor LOCKER BED side STEEL and fixed as shown on drawing No. FD-257 & FD-1029including taking out unserviceable hasp & staple complete. |
| 44 | M&L for mild steel handle (as approved) of LOCKER BED side STEEL and fixing to Almirah as shown on drawing No. FD-257 & FD-1029 including taking out unserviceable handle complete. |
| 45 | M&L for mild steel hinge (as approved) 50mm in size suitable for LOCKER BED side STEEL and fixing to Almirah as shown on drawing No. FD-257 & FD-1029 including taking out unserviceable hinge complete. |
| 46 | M&L for complete removing/scrapping old worn out paint from LOCKER BED side STEEL (drawing No. FD-257 & FD-1029) by sand paper/scrapper and applying two coats of synthetic enamelled paint (as approved) over a coats of red oxide by spray painting machine on external and internal surface of locker including shelfs, complete all as specified and as directed. |
| 47 | Chair writing FD/MAP/12 M&L forseat of CHAIR WRITING and S&F of complete seatincluding taking out old worn out Tapestry/ Fabric Cloth and foam from chairs complete. |
| 48 | All as per item No 47 above but back of CHAIR WRITING. |
| 49 | M&L for handle of CHAIR WRITINGincluding taking out unserviceable handle from chairs complete. |
| 50 | M&L for mild steel Flat Iron 25x3.0mm as RUNNER of length 500mm (approx),fixing one end and other end welded to CHAIR WRITING and applying two coats of synthetic enamel paint over a coats of red oxide zinc chrome primer on steel surfaces as shown on drawing No. FD/MAP/12 including taking out unserviceable runner complete. |
| 51 | Rack steel 6 tier FD-106, 1038 M&L for shelf made out of 1.0mm thick mild steel Sheet ofRACK 6 TIER STEEL and made to shape and size as shown on drawing No. FD-106 & FD-1038, applying two coats of (OG) synthetic enamel paint (as approved) by spray painting machine over a coats of red oxide primer including taking out unserviceable shelf, complete. |
| 52 | Taking out unservisiable anlge iron and supply & fixing new angle iron fo size 40x40x4 mm for FD-1038 and 30x30x3mm for FD-106 ofRACK 6 TIER STEEL as shown on drawing, applying two coats of (OG) synthetic enamel paint (as approved) by spray painting machine over a coats of red oxide primer including taking out unserviceable shelf complete. |
| 53 | M&L for complete removing/scrapping old worn out paint from RACK 6 TIER STEEL (drawing No. FD-106 & FD-1038) by sand paper/scrapper and applying One coats of OG synthetic enamelled paint (as approved) by spray painting machine over a coats of red oxide zinc chrome primer, complete. |
| 54 | Form with out Back FD-77/ FD-1027 M&L for seatofFORM WITHOUT BACK made of single plank of teak woodof size 1800x255x25mm as shown on drawing No. FD-77/ FD-1027including taking out unserviceable seat complete. |
| 55 | M&L for for broken legwith mild steel square pipe of size 25mm x1.6 mm thick(as required) for FORM WITHOUT BACKas shown on drawing No. FD-77 / FD-1027 necessary preperation of surfaces, applying two coats of (OG) synthetic enamel paint (as approved) by spray painting machine over a coats of red oxide primer complete. |
| 56 | M&L for removing/scrapping old worn out paint from FORM WITHOUT BACK (drawing No. FD-7&/ FD-1027) by sand paper/ scrapperand applying two coats of OG synthetic enamelled paint (as approved) by spray painting machine complete. |
| 57 | M&L forwelding (full round on pipe as a one spot) ofbroken part of FORM WITHOUT BACK as shown on drawing No. FD-77/ FD-1027 rubbing welded portion to obtain a smooth surface, necessary preperation of surfaces and applying two coats of synthetic enamel paint (as approved) by spray painting machine over a coats of red oxide primer. |
| 58 | Teapoy Varandha FD/E6/MAP/18 & FD-255 M&L for top of TEAPOY VARANDHA of MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ARCHIED), providing teak wood beading 5.0 mm thick all round, applying french polish upto the desired finish on beading, as shown on drawing No. FD/E6/MAP/18 or FD- 255 including taking out unserviceable top complete. |
| 59 | S&F of new leg/frame part with mild steel square pipe of size 18mm x 1.6 mm thick / 20 mm round pipe 1.6 mm thick (as required) for TEAPOY VARANDHAas shown on drawing No. FD/E6/MAP/18 and FD-1009 and removing ofunserviceable leg/ frame part duly necessary preperation of surfaces and applying two coats of (OG) synthetic enamel paint (as approved) by spray painting machine over a coats of red oxide primer. |
| 60 | M&L for removing/scrapping old worn out paint from TEAPOY VARANDHA(drawing No. FD/E6/MAP/18 and FD-255) by sand paper/ scrapperand applying two coats of OG synthetic enamelled paint (as approved) by spray painting machine complete. |
| 61 | M&L forwelding (full round on pipe as a one spot) ofbroken part of TEAPOY as shown on drawing No. FD/E6/MAP/18 and FD-255, rubbing welded portion to obtain a smooth surface, necessary preperation of surfaces, applying two coats of synthetic enamel paint (as approved) by spray painting machine over a coats of red oxide primer . |
| 62 | Shoe rack FD/E6/MAP M&L forwelding (full round on pipe as a one spot) ofbroken part of RACK SHOE as shown on drawing , rubbing welded portion to obtain a smooth surface, necessary preperation of surfaces, applying two coats of synthetic enamel paint (as approved) by spray painting machine over a coats of red oxide primer, including removal of unserviceable part. |
| 63 | Charpoy GI pipe with Nylon Newar FD-220 Complete removing of unservicable long rail and S&F new long rail of GI trubing 32 mm bore medium grade (ISI marked) duly threaded both ends all as per drg. |
| 64 | M&L for complete removing of old unserviceable short railand making of 2 Nos short rails from long rails obtained from item No. 63 and threading the both ends of short rails and fixing in position complete. |
| 65 | M&L for complete removingof old unserviceable legs and making of 2 Nos legs from short rails obtained from item No. 70 and threading the both ends of legs and fixing in position complete. |
| 66 | M&L for complete removing of unserviceable 3 way elbow and S & F new GI elbow 32 mm dia ISI Marked as per drawing. |
| 67 | M&L for completeremoving of unserviceable check nuts and S & F new 32 mm dia GI check nut (thickness of check nuts shall not be less than 8 mm) all as per drawing. |
| 68 | M&L for complete Removing/taking down existing nylon newar from G.I. pipe charpoys and tightening before weaving with and including approved new white or light colour nylon newar (not made out of recycled nylon) 50 mm wide weight 140grams per 10 runnning metere, closely knitted on both sides and end of newar stiched around, weight of newar in each charpoy not less than 1.50kg complete all as directed |
| 69 | Removingof unserviceable nylone newar from Charpoy GI pipe tightening of loose components of (i.e.complete charpoy ) and S&F plywood 12mm thickBWR gradeISI marked confirming to IS-303 of required size (out of 7’x3’) with galvanized iron nuts and bolts of required size and suitable length . S&F three stiffener made out of flat iron 900x50x5mm duly painted with two coats of Blackcolour synthetic enamel paint of 1st quality over a coats of red oxide primer to be fixed over the long rails ofdrilling holes in flat iron and long rail by 01 No semi circular top bolts of6mm diax75 mm long for every stiffener and every side, total 02 Nos for every stiffener. 01 No semi circular top bolts of6mm diax50 mm long shall be fixed on middle of the every stiffener to fix the plytop.S&F two stiffener made out of flat iron 700x25x5mm duly painted with two coats of Blackcolour synthetic enamel paint of 1st quality over a coats of red oxide primer to be fixed over and paraller tothe short rails ofdrilling holes in flat iron and short rail by 2 nos semi circular top bolts of6mm diax75 mm long on everyshort rail.Total 10 Nos nut and botls with semi circular topof 6mm diax75 mm long and 03 Nos nut and bolts with semi circular top of 6 mm dia x 50 mm long with steel washers to be used for fixing of plywood top. |
| 70 | Almirah Large steel 1/2 H x 1/2 S FD/MAP/18, FD- 1033 M&L for shelf made out of 1.0mm thick mild steel Sheet of ALMIRAH LARGE STEEL and made to shape and size as shown on drawing No. FD/MAP/18, necessary preperation of surfaces, applying two coats of (OG) synthetic enamel paint (as approved) by spray painting machine over a coats of red oxide primer including taking out unserviceable shelf. |
| 71 | M&L for door made out of 1.0mm thick mild steel Sheet of ALMIRAH LARGE STEEL and made to shape and size as shown on drawing No. FD/MAP/18, necessary preperation of surfaces, applying two coats of (OG) synthetic enamel paint (as approved) by spray painting machine over a coats of red oxide primer including taking out unserviceable door. |
| 72 | M&L for legmade out of 1.0mm thick mild steel Sheet of ALMIRAH LARGE STEEL and made to shape and size as shown on drawing No. FD/MAP/18, necessary preperation of surfaces, applying two coats ofsynthetic enamel paint (as approved) by spray painting machine over a coats of red oxide primer including taking out unserviceable leg. |
| 73 | M&L for LOCKING DEVICE made out of 1.0mm thick mild steel Sheet of ALMIRAH LARGE STEEL and made to shape and size as shown on drawing No. FD/MAP/18 including taking out unserviceable locking device. |
| 74 | M&L for lock(MAKE : GODREJ) of ALMIRAH LARGE STEEL and fixing to Almirah as shown on drawing No. FD/MAP/18 including taking out unserviceable lock. |
| 75 | M&L for mild steel handle (as approved) of ALMIRAH LARGE STEEL and fixing to Almirah as shown on drawing No. FD/MAP/18 including taking out unserviceable handle. |
| 76 | M&L for mild steel hinge (as approved) 75mm in size suitable for ALMIRAH LARGE STEEL and fixing to Almirah as shown on drawing No. FD/MAP/18 including taking out unserviceable hinge. |
| 77 | M&L for preperation of old surfaces of ALMIRAH LARGE STEEL (drawing No. FD/MAP/18) by sand paper/scrapper and applying One coats ofsynthetic enamelled paint (as approved) by spray painting machine. |
| 78 | Bed Hard steel FD/E6/MAP/08R M&L for head side board of BED HARD MS TUBINGof Prelaminated Particle Board 18/19mm thick, exterior grade, ISI marked and fixing as shown on drawing No. FD/E6/MAP/08R including taking out unserviceable Head side board |
| 79 | M&L for FOOT REST BOARD of BED HARD MS TUBING of Prelaminated Particle Board 18/19mm thick, exterior grade, ISI marked and fixing as shown on drawing No. FD/E6/MAP/08R including taking out unserviceable foot rest board. |
| 80 | M&L for Plywoodtop 12mm thickBWR grade confirming to IS-303, ISI marked and fixing to BED HARD MS TUBING as shown on drawing No. FD/E6/MAP/08R including taking out unserviceable Plywoodtop, complete all as specified and as directed. |
| 81 | M&L for MIDDLE stiffener made out from mild steel square Tube/pipe 25x25mm of 1.6mm wall thickness, adjusting existing 2 No. Stiffeners and fixing to BED HARD MS TUBING and fixing as shown on drawing No. FD/E6/MAP/08R, applying two coats of synthetic enamel paint (as approved) by spray painting machine over a coats of red oxide primer, complete all as specified and as directed. |
| 82 | M&L for mild steel CLIT of size 25x25x6mm with single hole on short hails for Support of Plywoodtop and fixing to BED HARD MS TUBINGand fixing as shown on drawing No. FD/E6/MAP/08R, applying two coats of synthetic enamel paint (as approved) by spray painting machine over a coat of red oxide primer. |
| 83 | M&L for complete removing/scrapping old worn out paint on steel surfaces of BED HARD MS TUBING (drawing No. FD/E6/MAP/08R by sand paper/scrapper and applying one coat of synthetic enamelled paint (as approved) by spray painting machine over a coats of red oxide zinc chrome primer. |
| 84 | Charpoy MS Tubing with plywoodtopFD/MAP-II/01 M&L for Plywoodtop 12mm thickBWR grade confirming to IS-303, ISI marked and fixing to CHARPOY MS TUBING WITH PLYwoodtop as shown on drawing No. FD/MAP-II/01 including taking out unserviceable plywood top. |
| 85 | M&L for middle stiffener made out from mild steel square Tube/pipe 25x25mm of 1.6mm wall thickness, adjusting existing 2 No. Stiffeners and fixing to CHARPOY MS TUBING WITH PLYwoodtop and fixing as shown on drawing No. FD/MAP-II/01, applying two coats of synthetic enamel paint (as approved) by spray painting machine over a coats of red oxide primer. |
| 86 | M&L for mild steel CLIT of size 25x25x6mm with single hole on Short Rails for Support of Plywoodtop and fixing to CHARPOY MS TUBING WITH PLYwoodtop and fixing as shown on drawing No. FD/MAP-II/01, applying two coats of synthetic enamel paint (as approved) by spray painting machine over a coats of red oxide primer. |
| 87 | M&L for complete removing/scrapping old worn out paint on Steel Surfaces of CHARPOY MS TUBING WITH PLYwoodtop (drawing No. FD/MAP-II/01 by sand paper/scrapper and applying One coats of synthetic enamelled paint (as approved) by spray painting machine over a coats of red oxide zinc chrome primer. |
| 88 | Table Dining Ors FD-165(M) M&L for top of TABLE DINING ORS of Blockboard Board 18/19 mm thick with 22 guage aluminium sheet (MAKE : GREEN PLY/CENTURY), shown on drawing No. FD-165(M) including taking out unserviceable top. |
| 89 | M&L for mild steel square pipe of size 20mm, 1.6mm thick as leghaving length from 300mm to 500mm and fixing/ welded to TABLE DINING ORS as shown on drawing No. FD-165(M), applying two coats of (OG) synthetic enamel paint (as approved) by spray painting machine over a coats of red oxide primer including taking out unserviceable leg. |
| 90 | M&L for mild steel square/round pipe of size 25mm, 1.6mm thick as LONG RAIL and fixing/welded to TABLE DINING ORS as shown on drawing No. FD-165(M), applying two coats of (OG) synthetic enamel paint (as approved) by spray painting machine over a coats of red oxide primer including taking out unserviceable long rail. |
| 91 | M&L for mild steel square/Round pipe of size 25mm, 1.6mm thick as SHORT RAIL and fixing/welded to TABLE DINING ORS as shown on drawing No. FD-165(M), applying two coats of (OG) synthetic enamel paint (as approved) by spray painting machine over a coats of red oxide primer including taking out unserviceable short rail. |
| 92 | M&L for mild steel square/Round pipe of size 25mm, 1.6mm thick as side STIFFNER and fixing/welded to TABLE DINING ORS as shown on drawing No. FD-165(M), applying two coats of (OG) synthetic enamel paint (as approved) by spray painting machine over a coats of red oxide primer including taking out unserviceable side stiffner. |
| 93 | M&L for mild steel square pipe of size 25mm, 1.6mm thick as CENTRAL STIFFNER and fixing/welded to TABLE DINING ORS as shown on drawing No. FD-165(M), applying two coats of (OG) synthetic enamel paint (as approved) by spray painting machine over a coats of red oxide primer including taking out unserviceable central stiffner. |
| 94 | M&L for complete removing/scrapping old worn out paint from TABLE DINING ORS (drawing No. FD-165(M) by sand paper/scrapper and applying two coats of synthetic enamelled paint (as approved) by spray painting machine over a coats of red oxide zinc chrome primer. |
| 95 | Table Office Officer steel FD-84,1003 M&L for top of TABLE OFFICE OFFICER STEEL of Prelaminated MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ ARCHIED), providing teak woodBeading 5.0 mm thick all round,applying french polish upto the desired finish on beading, as shown on drawing No. FD-84 & FD-1003 including taking out unserviceable top, complete all as specified and as directed. |
| 96 | M&L for drawer made out of 1.6mm thick mild steel Sheet and fixing to TABLE OFFICE OFFICER STEEL as shown on drawing No. FD-84 & FD-1003, necessary preperation of surfaces, applying two coats of (OG) synthetic enamel paint (as approved) by spray painting machine over a coats of red oxide primer including taking out unserviceable drawer. |
| 97 | M&L for central stiffener made out of mild steel square pipe of 25mm and fixing to TABLE OFFICE OFFICER STEEL as shown on drawing No. FD-84 & FD-1003, necessary preperation of surfaces, applying two coats of (OG) synthetic enamel paint (as approved) by spray painting machine over a coats of red oxide primer including taking out unserviceable central stiffener. |
| 98 | M&L for side stiffener made out of mild steel square pipe of 25mm and fixing to TABLE OFFICE OFFICER STEEL as shown on drawing No. FD-84 & FD-1003, necessary preperation of surfaces, applying two coats of (OG) synthetic enamel paint (as approved) by spray painting machine over a coats of red oxide primer including taking out unserviceable side stiffener. |
| 99 | M&L for lock(MAKE : GODREJ) of TABLE OFFICE OFFICER STEEL and fixing as shown on drawing No. FD-84 & FD-1003 including taking out unserviceable lock. |
| 100 | M&L for mild steel handle of TABLE OFFICE OFFICER STEEL and fixing as shown on drawing No. FD-84 & FD-1003 including taking out unserviceable handle. |
| 101 | M&L for for welding of Broken legwith mild steel square pipe of size 25mm (as required) for TABLE OFFICE OFFICER STEEL as shown on drawing No. FD-84 & FD-1003, necessary preperation of surfaces, applying two coats of (OG) synthetic enamel paint (as approved) by spray painting machine over a coats of red oxide primer including removal of unserviceable part . |
| 102 | M&L for removing/scrapping old worn out paint from TABLE OFFICE OFFICER STEEL (drawing No. FD-84 & FD-1003) by sand paper/scrapper and applying two coats of OG synthetic enamelled paint (as approved) by spray painting machine. |
| 103 | Table office clk steel Fd-84,381&1004 M&L for top of TABLE OFFICE CLERK STEEL of Prelaminated MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY), providing teak woodBeading 5.0 mm thick all round, applying french polish upto the desired finish on beading as shown on drawing No. FD-84, FD-381 & FD-1004 including taking out unserviceable top. |
| 104 | M&L for drawer made out of 1.6mm thick mild steel Sheet and fixing to TABLE OFFICE CLERK STEEL as shown on drawing No. FD-84, FD-381 & FD-1004, necessary preperation of surfaces, applying two coats of (OG) synthetic enamel paint (as approved) by spray painting machine over a coats of red oxide primerincluding taking out unserviceable drawer. |
| 105 | M&L for central stiffener made out of mild steel square pipe of 25mm and fixing to TABLE OFFICE CLERK STEEL as shown on drawing No. FD-84, FD-381 & FD-1004, necessary preperation of surfaces, applying two coats of (OG) synthetic enamel paint (as approved) by spray painting machine over a coats of red oxide primer including taking out unserviceable central stiffener. |
| 106 | M&L for side stiffener made out of mild steel square pipe of 25mm and fixing to TABLE OFFICE CLERK STEEL as shown on drawing No. FD-84, FD-381 & FD-1004, necessary preperation of surfaces, applying two coats of (OG) synthetic enamel paint (as approved) by spray painting machine over a coats of red oxide primer including taking out unserviceable side stiffener. |
| 107 | M&L for lock(MAKE : GODREJ) of TABLE OFFICE CLERK STEEL and fixing as shown on drawing No. FD-84, FD-381 & FD-1004 including taking out unserviceable lock. |
| 108 | M&L for mild steel handle of TABLE OFFICE CLERK STEEL and fixing as shown on drawing No. FD-84, FD-381 & FD-1004 including taking out unserviceable handle. |
| 109 | M&L for welding of Broken legwith mild steel square pipe of size 25mm (as required) for TABLE OFFICE CLERK STEEL as shown on drawing No. FD-84, FD-381 & FD-1004, necessary preperation of surfaces, applying two coats of (OG) synthetic enamel paint (as approved) by spray painting machine over a coats of red oxide primerincluding removal of unserviceable partcomplete. |
| 110 | M&L for removing/scrapping old worn out paint from TABLE OFFICE CLERK STEEL (drawing No. FD-84, FD-381 & FD-1004) by sand paper/ scrapperand applying two coats of OG synthetic enamelled paint (as approved) by spray painting machine. |
| 111 | Table 3"x2" with out Drawer FD-1007 M&L for top of TABLE 3"X2"WITH OUT DRAWER of Prelaminated MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY), providing teak woodBeading 5.0 mm thick all round, applying french polish upto the desired finish on beading as shown on drawing No. FD-1007including taking out unserviceable top. |
| 112 | M&L for central stiffener made out of mild steel square pipe of 25mm and fixing to TABLE 3"X2"WITH OUT DRAWERas shown on drawing No. FD-1007, necessary preperation of surfaces, applying two coats of (OG) synthetic enamel paint (as approved) by spray painting machine over a coats of red oxide primerincluding taking out unservice-able central stiffener. |
| 113 | M&L for side stiffener made out of mild steel square pipe of 25mm and fixing to TABLE 3"X2"WITH OUT DRAWERas shown on drawing No. FD-1007, necessary preperation of surfaces, applying two coats of (OG) synthetic enamel paint (as approved) by spray painting machine over a coats of red oxide primerincluding taking out unserviceable side stiffener. |
| 114 | M&L for for welding of Broken legwith mild steel square pipe of size 25mm (as required) for TABLE 3"X2" without draweras shown on drawing No. FD-1007, necessary preperation of surfaces, applying two coats of (OG) synthetic enamel paint (as approved) by spray painting machine over a coats of red oxide primerincluding removal of unserviceable partcomplete all as specified and as directed. |
| 115 | M&L for removing/scrapping old worn out paint from TABLE 3"X2"WITH OUT DRAWER(drawing No. FD-1007) by sand paper/ scrapperand applying two coats of OG synthetic enamelled paint (as approved) by spray painting machine. |
| 116 | Table 900x 900mm steel FD-1009 M&L for top of TABLE 3"X3"WITH OUT DRAWER of Prelaminated MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ARCHIED), providing teak woodBeading 5.0 mm thick all round, applying french polish upto the desired finish on beading, as shown on drawing No. FD-1009including taking out unserviceable top. |
| 117 | M&L forwelding of Broken legwith mild steel square pipe of size 25mm (as required) for TABLE 3"X3"without DRAWERas shown on drawing No. FD-1009, necessary preperation of surfaces, applying two coats of (OG) synthetic enamel paint (as approved) by spray painting machine over a coats of red oxide primer complete all as specified and as directed. |
| 118 | M&L for removing/scrapping old worn out paint from TABLE 3"X3"WITH OUT DRAWER(drawing No. FD-1009) by sand paper/ scrapperand applying two coats of OG synthetic enamelled paint (as approved) by spray painting machine complete. |
| 119 | M&L forwelding (full round on pipe as a one spot) ofbroken part of TABLE 3"X3" STEEL as shown on drawing No. FD-1009, rubbing welded portion to obtain a smooth surface, necessary preperation of surfaces, applying two coats of synthetic enamel paint (as approved) by spray painting machine over a coats of red oxide primer including taking out unserviceable part complete. |
| 120 | Table Bed side FD/E6/MAPM&L for top of TABLE BED side of MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE GREEN PLY /CENTURY / ARCHIED), providing teak woodBeading 5.0 mm thick all round, applying french polish upto the desired finish on beading as shown on drawing including taking out unserviceable top. |
| 121 | M&L for side / Back of TABLE BED side of MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ARCHIED), providing teak woodBeading 5.0 mm thick all round, applying french polish upto the desired finish on beading as shown on drawing including taking out unserviceable side/back complete. |
| 122 | M&L for UPPER DRAWER of TABLE BED side of MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ARCHIED)as shown on drawing including taking out unserviceable Upper drawer complete. |
| 123 | M&L forLOWER DRAWERof TABLE BED side of MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ARCHIED)as shown on drawing including taking out unserviceable lower drawer complete |
| 124 | M&L for leg of TABLE BED side of MS squre pipe 25x25 mm x 1.6 mm as shown on drawing including taking out unserviceable leg, complete all as specified and as directed. |
| 125 | Table computer FD/E6/MAP M&L for top of TABLE COMPUTER of Prelaminated MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ ARCHIED), providing teak woodBeading 5.0 mm thick all round,applying french polish upto the desired finish on beading as shown on drawingincluding taking out unserviceable top complete. |
| 126 | M&L for drawer made out of Prelaminated MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ ARCHIED) and fixing to TABLE COMPUTER as shown on drawing including taking out unserviceable drawer complete. |
| 127 | M&L for lock of TABLE COMPUTER and fixing as shown on drawingincluding taking out unserviceable lock. |
| 128 | M&L for mild steel handle of TABLE COMPUTER and fixing as shown on drawing including taking out unserviceable handle. |
| 129 | S&F for HARD RUBBER SHOE superior quality (as approved) fixing to legof TABLE COMPUTER as shown on drawing including taking out unserviceable shoe. |
| 130 | Charpoy IP Folding plywoodtop FD-388 M&L for Plywoodtop 9 mm thickBWR grade confirming to IS-303, ISI marked and fixing to CHARPOY IP FOLDING WITH PLYwoodtop as shown on drawing No. FD-388 including taking out unserviceable Plywoodtop, complete all as specified and as directed. Make |
| 131 | M&L for stiffener made out from mild steel round Tube/pipe 25mm dia 2 mmwall thickness, of CHARPOY IP FOLDING WITH Plywood top and fixing as shown on drawing No. FD-388applying two coats of synthetic enamel paint (as approved) by spray painting machine over a coats of red oxide primer duly removing unserviceable stiffener . |
| 132 | M&L for mild steel gusset plate of size 120x120x5mm reveted with long rail and legto CHARPOY MS TUBING WITH Plywood top and fixing as shown on drawing No. FD- 388, applying two coats of synthetic enamel paint (as approved) by spray painting machine over a coats of red oxide primer duly removal of unserviceable plate complete. |
| 133 | M&L forwelding (full round on pipe as a one spot) ofbroken part ofCHARPOY MS TUBING WITH PLYwoodtop as shown on drawing No. FD-388, rubbing welded portion to obtain a smooth surface, necessary preperation of surfaces, applying two coats of synthetic enamel paint (as approved) by spray painting machine over a coats of red oxide primercomplete. |
| 134 | M&L for removing of old leg/ frame part ofCHARPOY MS TUBING WITH PLYwoodtop and S&F new part/legportion made of 25 mm dia MS pipe of 2 mm wall thickness as perdrawing No. FD388 and welded, necessary preperation of surfaces, applying two coats ofsynthetic enamel paint (as approved) by spray painting machine over a coats of red oxide primercomplete. |
| 135 | M&L for complete removing/scrapping old worn out paint on Steel Surfaces of CHARPOY IP FOLDING WITH PLYwoodtop (drawing No. FD- 388 by sand paper/scrapper and applying two coats of synthetic enamelled paint (as approved) by spray painting machine over a coats of red oxide zinc chrome primer complete. |
| 136 | M&L for Junction box outdoor in replacement type, 3 phase 415 Volts of size 350x250x150 mm made out of hot press moulded SMCfront openable hinged type including 4 Nos. Al bus bars mounted on insulators heavy duty of rating 32 Amps with necessary fixing arrangements to pole with mild steel calmps, nuts, bolts etc of size 25 x 4 mm duly painted with two coats of synthetic enamel paint over a coats of red oxide primer complete all as specified and as directed. Make : Sintex/Hensel/L&T |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
