Tender For Restoration Of 11 Kv Power Supply At Power House Area, Pamphok
Tender Value
7.50 Lakhs
Estimated cost
Bid Submission
12 Jul 2024
0 days left
EMD
15000
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
East Sikkim → Sikkim
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Restoration Of 11 Kv Power Supply At Power House Area, Pamphok
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 14-Jun-2024 | 1ST CORRIGENDUM OF DATE | Date | 27-Jun-2024 |
| 2 | 01-Jul-2024 | 2nd Corrigendum of date | Date | 12-Jul-2024 |
BOQ
| Sl. No. | Item Description |
| 1 | Supply and Errection of 11 Mtrs.steel latticed structure of 65 x 65 x 6 mm M.S.angle complete with nuts & bolt confirming to specification of design detail no 1/L/FT/E&PD/11 mtrsi) Without Arms. |
| 2 | Supply and Errection of M.S. channelISLC (75x40x6mm),Sail Brand Confirming to IS 808 |
| 3 | Supply and Errection ofM.S. nuts&bolts of 16 mm dia x 40 mm Full Threaded,confirming to IS 1364. |
| 4 | Supply and Errection of 11 KV pin insulator with G.I. pin & fitting as per required ( Porceline/Polymer),,confirming to IS 731. |
| 5 | Supply and Errection of 9 KV,10KA Single Pole Metal Oxide Gapless surge arrestor for 11 KV ,50Cs solidly earthed Neutral system confirming to IS:3070(part 3) |
| 6 | Supply and Errection of 11 KV, 3 Pole,400 Amps, Air Break G.O S tilting type, three insulators per phase, complete with all fittings confirming to IS: 9920& IS:9921( Porceline/Polymer) |
| 7 | Supply and Errection of 11 KV, 3 Pole,400 Amps, D.O.F Unit complete with all accessaries confirming to IS: 9385( Porceline/Polymer) |
| 8 | Supply and Errection of GI Wire 8SWG/10SWG/12SWG/16 SWG Confirming To IS 1367 part 3 |
| 9 | Supply and Errection of Safe Earthing model T-19 shortcurrent 20 KA RMS for 1 sec (LV/MV)application confirming to IS:3043 with 50 mm dia x2 mtrs electrode(Copper bonded) & one bag backfill chemical compound. |
| 10 | Supply and Errection of Heat shrinkable Outdoor type End termination kit for 6.35KV (Uo)/11KV (U) 3 core XLPE (kit No. EOKT-3332-3382).3C X 050 sqmm EPKT 3352 |
| 11 | Supply and Errection of Guy assembly complete with 7/10 SWG,Stay wire, 140x85 mm HT guy insulator, 18 mm dia stay rod 1.8 mtrs. long with bow thimble, turn buckle and 300x300x6mmanchor plate Confirming to IS:1367 Part3. |
| 12 | Concreting of HT Guy assembly in 1:4:8 CC in 0.40 x 0.40 x 1.05 mtrs.pit. |
| 13 | Concerting of 11 Mtrs. Latticestructure/Swadge STP in 1:4:8 CC in .9x.9x2.05mtrcement plaster of parapet in 1:4 mix. |
| 14 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 15 | Providing, fixing & removing form work for casting R.C.C items as indicated below: with locally available timber) Foundation, footings, base of column etc for mass concrete. |
| 16 | Providing and Laying Plum concrete in 1:2:4 c.c. (1cement,2coarse sand, 4clean hard graded stone chips of 20 mm down nominal gauge) with 70% clean hard stone of sizes not exceeding 15cm including shuttering, compacting and curingcomplete, as per the direction of Engineer in Charge |
| 17 | Providing and Laying in position cement concrete of specified grade including compacting curing etc all complete. 1:2:4 mix. (1 cement, 2 coarse sand, 4 graded stone aggregate of 20mm & down size) |
| 18 | Fencing with welded steel wire Fabric 75 mm x 50 mm (Suggestive) (Providing 1.20 metre high fencing with angle iron posts 50 mm x 50 mm x 6 mm at 3 metre center to center with 0.40 metre embedded in M15 grade cement concrete, corner, end and every 10th post to be strutted, provided with welded steel wire fabric of 75 mm x 50 mm mesh or 75 mm x 25 mm mesh and fixed to iron posts by flat iron 50 x 5 mm and bolts etc. complete in all respects.) |
AI Tender Summary
Tender Timeline
Jul 01, 2024
11:30 IST
Tender Published
Tender notice published.
Completed
Jun 27, 2024
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jul 12, 2024
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedJul 12, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 17, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender