Military Engineer Services-MES has published Tender For Maintenance/ Repair And Replacement Of Ci/Gi/ Di Pipe At Various Installations Of Water Supply (North Area) Under Age E/M (Ws) At Ge (U) E/M Meerut Cantt. Submission Date for this Tender is 11-06-2024. Ductile Iron Pipe Tenders in meerut Uttar Pradesh. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 04-Jun-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 11-06-2024 |
Sl. No. | Item Description |
1 | Excavation in trenches in soft/loose soil n.exc. 1.5M wide & n exc 1.5M deep for laying of GI/CI/DI pipe line & getting out including forming bottom surface complete all as specified and directed. |
2 | All as per item No. 1 above but in Hard/dense soil including cutting of roads/PCC floors etc complete all as specified and directed. |
3 | Returning, filling in, trenches including spreading, levelling, watering and well ramming in layer n.exc. 250 mm in any type of soil after the pipe laid & tested complete all as specified and directed. |
4 | Removing excavated surplus soil to a distance n.exc. 50mtr and depositing where directed at a level n.exc. 1.5 m above the starting point complete all as specified and directed. |
5 | Disconnecting and Taking out old existing CI pipe including all fitting with spigot and socket ends and lead jointed any description / grade and in any position of trenches / under floors/ on wall etc all asdirected and specified for thefollowing sizes :- |
6 | 200mm dia bore |
7 | 150mm dia bore |
8 | 100mm dia bore |
9 | Disconnecting and Taking out old existing GI pipe and connecting of any description / grade and any position of trenchesincluding connecting fitting / accessoriese and fixtures. all as directed and specified for the following size of pipe :- |
10 | 80mm dia bore |
11 | 50 mm dia bore |
12 | 40 mm dia bore |
13 | 25 mm dia bore |
14 | 20mm dia bore |
15 | 15mm dia bore |
16 | Supply only DI/CISpecials class B as per ISsuch as bends,tappers,any type branches cross all sockets and spigot collar caps and plug up to 250mm bore all as specified and as directed |
17 | M & L for run lead joint to cast iron spigot and socket end pipe class and CI special fitting caulks, spun yarn and lead complete of thefollowing sizes all as specified and directed |
18 | 200mm dia bore |
19 | 150mm dia bore |
20 | 100mm diabore |
21 | 80mm diabore |
22 | Dismantling the existing rubber/fiberboard gasket and replacing it withNewjoint including nuts,bolts and washer of appropirate size complete all as required at site and directed by Engr-in-Charge |
23 | 200mm dia bore |
24 | 150mm dia bore |
25 | 100mm diabore |
26 | 80mm diabore |
27 | Taking down old existing sluice valve and S & F sluice valve PN-1.6with stainless steelspindle conforming to IS-14846-2000 doubles flange and including new flanged rubber joints complete suitable forfollowing sizes including necessary nuts, boltswith washer and rubber gasket of following sizes :- |
28 | 200mm dia bore |
29 | 150mm diabore |
30 | 100mm diabore |
31 | 80mm dia bore |
32 | S & F in repairs cast iron non return valve, both ends flanged jointed, ISI marked of approved quality and tested complete all as specified and directed of following sizez :- |
33 | 200mm dia bore |
34 | 150mm diabore |
35 | 100mm diabore |
36 | Supply and fixing in replacement Gun metal gate valve with iron wheel head screwed both ends for iron pipe including tasting of following :- |
37 | 50mm diabore |
38 | 40mm diabore |
39 | 25mm diabore |
40 | 20mm diabore |
41 | Supply and fixing in replacement Bib taps 15 mm dia, PTMT any colour, high pressure screwed for iron pipes and fixed to pipe (minimum weight not less than 90 gms) complete all as specified& directed. |
42 | Cutting of existing CI/DI Pipes and reducingto required length before laying in position for insertion of new tees, branches etc complete all as specified & directed. For following size :-Note :- Fittings will be measured and paid separately under respective item as supply only complete all as specified and directed. |
43 | 200mm dia bore |
44 | 150mm diabore |
45 | 100mm diabore |
46 | 80mm dia bore |
47 | M &L for Stainless steel spindle for any make and type of sluice valve fixed in repair all as specified and directed, for following sizes of sluice valves:- |
48 | 200mm dia bore |
49 | 150mm diabore |
50 | 100mm diabore |
51 | 80mm dia bore |
52 | S & F GI tubing, medium grade, ISI marked complete with all fittings, laid in trenches or laid under floors, fixed on walls with and providing clamps etc complete all as specified & directed, for the following size:- |
53 | 80mm dia bore |
54 | 50mm dia bore |
55 | 40mm diabore |
56 | 25mm dia bore |
57 | 20mm diabore |
58 | 15 mm dia bore |
59 | M & L for Ductile iron pipes with spigot and socket ends, centrifugally cast (spun) class K9, in any length, externally coated with metallic Zinc Coating finished with bituminous paint complete all as specified of the following bore:- Note :- Excavation, earthwork and DI Joint shall be measured and paid separately) |
60 | 200mm dia bore |
61 | 150mm diabore |
62 | 100mm diabore |
63 | Dismantling of CIpipe size 150mm to 250mmjoint of flanged pipe in position, incl removing old rubber or fibre board gaskets, bolts, nut, welding etc and replaced new gasket & Nut, bolts and wahsers of flanged pipe and refixing in sameposition of any size all as directed by Engr - in - Charge. |
64 | M&L for horizental boringfor 150mmdia and up to 1.5m depth with hydraulic machine under any surface ( Hard/Deuse/ RCC/ Coal tar Road) for laying of pipeline including trenching if required . Cost of horizontal Bore Machine (hydraulic) & all allied items required for boring is deemed to be included in quoted rates complete all as specified and directed. |
65 | M & L for repair work of riser / delivery lines of any size coming down / going up at OHT at any height including preparation of staging and necessary tools required. Repair work includes replacement of "D" joint packing in flange or socket using required fitting all as specified and directed by Engr-in-Charge Note:- Rate of fitting required is deemed to be included in the Job. |
66 | Construction ofvalve pit of size 1 Mtr X 1 Mrt X 1 Mrt (Internal dimensions ) including all excavation and earth work in any type of soil and disposal of soil to a distance of not exciting 50mtr and depositing all as directed includingone brick thick brick works in cm 1:6, 10mm plastering internally in CM 1:4, PCC 1:2:4 100mm thick at bottom of valve pit, and tap of brick wall including mild steel cover made of MS Sheet 3mm thick with angle iron frame 35X35X5mm and 40X40X5mm at bottom for minting and MS sheet cover inlet. Handle lockingarrangement with 1 No. lock including two coats of synthetic enamel paintover a coal of red oxide primer on steel surface complete all as specified. |
67 | All as per time No. 21 above but of size 1.2Mtr X 1.2Mtr X 1.2Mtr |
68 | M & L for cement concrete type B-11:2:4 (20mm grade stone aggregate) as in door cills, path and plinth protection (of any section)including chambers, weatherings, throat-ing etc and setting in mortar complete all as specified and directed. |
69 | S & FCI Detachable joint 150mm long length complete with nuts, bolts, washers and rubber ring (Set) suitable for 200mm nominal bore CI/DI pipe complete all as specified and directed. |
70 | S & FCI Detachable joint 150mm long length complete with nuts, bolts, washers and rubber ring (Set) suitable for 150mm nominal bore CI/DI pipe complete all as specified and directed. |
71 | S & FCI Detachable joint 150mm long length complete with nuts, bolts, washers and rubber ring (Set) suitable for100mm nominal bore CI/DI pipe complete all as specified and directed. |
72 | S & F long length CI Detachable joint complete with nuts, bolts, washers and rubber ring (Set) suitable for 80mm nominal bore CI/DI pipe complete all as specified and directed. |
73 | S & F long length CI Detachable joint complete with nuts, bolts, washers and rubber ring (Set) suitable for 50mm nominal bore CI/DI pipe complete all as specified and directed. |
74 | Supply only galvanized iron fitting like TEE, Elbow, Socket, Union, Reduser, Nipple of suitable for existing GI tubing of size up to 80mm for preventing leakage of any make new branch connection complete all as specified and directed. |
75 | Day to Day maintenance/ repair / rectification of water supply complaints against any kind of fault in water pipe line of any size and type or No water supply complaint from building mounted OHT or any other complaint all as directed timeto time by digging / tightening of fittingsincluding necessary excavation returning filling and removing surplus soil (If required)and rectification of complaint to ensure satisfactory serviceability of the water supply with the help of providing the one plumber with one helper on daily basis complete all as directed by Engineer-in-chargeNote :- (i) The fittings required to replace shall be measured & paid for separately under relevant item of BOQ as "supply only" (ii) The contractor shall be fully responsible to provide necessary transportation, T & P and safety equipment to his labour to prevent any type of accidents and department will not responsible to provide any type of compensation to the contractor or his labour in case any type of accident / Miss happening or any type of causality to his labour/ plumber. (iii) In case any maintenance / complaine to the contractor telephonically or verbally or on complaint slip is not rectified within 48 Hours, the contractor shall be penalties @ Rs250/- per complaintper day and shall be recovered from the contractor"s dues. (v) The contractor or his representative will report to the concerned JE E/M daily in the morningat 9.30 AM to collect the complaints and shall deposite the same to his office after rectification duly signed by the concerned user / occupant of effected accn or area complete all as specified and directed. |
76 | M&L for treatment of bore well into aquifier zone by pouring acid conc HCL(purified) at least 31% concentration best quality of 70 Ltrs manually below ground level with the help of high density polythene pipe 20mm dia by syphone process all specified and directed. |
77 | Redevlopment of existing bore well by using air compressor machine by air compressor pipe using10 Kg/Cm2 without damaging the existing system to clear and clean upto bottom level to get clear portable water with the satisfaction of GE complete all as specified and directed. Note:- A log book shall be maintained by the contractor for calculation of duration of redevelopment duly signed by Engg-in-Charge, JE& Contractor and it shall be submitted alongwith RAR & Final Bill. |
78 | Supply and packing pea gravel of size 5.00mm to 8.00mm & packed around the housing/assembly & slotted pipe of borewell complete all as specified and directed. (Note- Measurement of pea gravel shall be taken in measuring box at site & the same shall be recorded in MB duly signed by Engr-in-Charge before packing sorrouding the tube well assembly. from the total volume 10% (Ten percent) of the volume shall be deducted for voids and net volume thereafter worked out for the purpose of the payment complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail