Military Engineer Services-MES has published Tender For Repair To Flooring And Floor Painting And Wall Panelling At Jalapahar And Katapahar Area Under Age I Darjeeling. Submission Date for this Tender is 15-06-2024. Composite Panel Tenders in Darjeeling West Bengal. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 08-Jun-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 15-06-2024 |
| Sl. No. | Item Description |
| 1 | Dismantling of boarding of any description fixed in any position with nails, complete all as specified and as directed by Engineer-in-charge. |
| 2 | S&F 40mm thick 2nd class hardwood planed one side withtongued and grooved joints and fixed with nails as in floors, complete all as specified and as directed by Engineer-in-charge. |
| 3 | S&F 20mm thick 2nd class hardwood planed one side with butt joints as in shelves of cupboards, racks and pelmets, eaves board and skirting work fixed with nails, complete all as specified and as directed by Engineer-in-charge. |
| 4 | Dismantling wall and ceiling boards (fibre, pulp, insulation,etc) or insulation board/Slabs/blankets of any thickness including cover fillets, complete all as specified and as directed by Engineer-in-charge. |
| 5 | M&L 15mm thick 2nd class soft wood planed one side & edges tongued and grooved or rebated with butt joints as in wall panelling and similar work fixed with nails, complete all as specified and as directed by Engineer-in-charge. |
| 6 | M&L for 6mm thick veneered decorative plywood grade 1 (with BWR resin) with decorative face veneers on one faces fixed with nails to timber frame work, complete all as specified and as directed by Engineer-in-charge. |
| 7 | Dismantling timber scantling 40 Sqcm & over in section in any position as in unframed work, complete all as specified and as directed by Engineer-in-charge. |
| 8 | Dismantling of unframed fillets, rails, posts, rafters, purlins etc., under 40 Sqcm in section, complete all as specified and as directed by Engineer-in-charge. |
| 9 | M&L for second class HW scantlings clean sawn in timber fixed work, complete all as specified and as directed by Engineer-in-charge. |
| 10 | M&L for preparing surfaces of wood and wood based materials, new or old of any description and girth, not otherwise described and treated with two coats of creosote oil, complete all as specified and as directed by Engineer-in-charge. |
| 11 | M&L for french polishing on surfaces of any description width or girth including cleaning and preparing the surfaces incl a coat of wood filler on old works with one or more coats, complete all as specified and as directed by Engineer-in-charge. |
| 12 | M&L for five coats of melamine polishing to new or existing wooden surface of any description as per manufacturer"s instructions, complete all as specified and as directed by Engineer-in-charge. |
| 13 | M&L for preparingnew wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed by Engineer-in-charge. |
| 14 | Demolition of unreinforced cement concrete in ground floors and pavings not exc. 15 cm thickness (below or above ground level) complete all as specified and as directed by Engineer-in-charge. |
| 15 | M&L for 100mm thick PCC 1:3:6,type C-2, (using 40mm graded stone aggregate) as in flooring & finishing the surfaces rough to receive screed bed, complete all as specified and as directed by Engineer-in-charge. |
| 16 | M&L second class hard wood fillets, bullnosed, splayed, chamfered or rounded on one edge or face, clean sawn, clean sawn, secured with nails or brads having sectional area exceeding 03 sqcm but not exceeding 06 sqcm complete all as specified and as directed by Engineer-in-charge. |
| 17 | M&L for preparation of old wooden surface of any description not otherwise described and exc 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed by Engineer-in-charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
