Tender For Work For Rotating Auxiliaries, Equipment And Etc. During Overhauling Of Unit No.-11Th Of 3X200mw, Btps, Obra
Tender Overview
Project Description
Tender For Work For Rotating Auxiliaries, Equipment And Etc. During Overhauling Of Unit No.-11Th Of 3X200mw, Btps, Obra
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 07-Jun-2024 | Date Extension | Date | 12-Jun-2024 |
BOQ
| Sl. No. | Item Description |
| 1 | Overhauling of Boiler Feed Pump up to balancing disc. |
| 2 | Inspection/Rectification of fault of BFP bearing. |
| 3 | Motor driving end bearing. |
| 4 | Motor non driving end bearing. |
| 5 | Pump suction end bearing. |
| 6 | Pump discharge end bearing. |
| 7 | O/H of Boiler Feed Booster Pump. |
| 8 | Complete O/H of condensate pump. |
| 9 | Re-visioning & checking of working oil cooler of BFP-A,B&C |
| 10 | Re-visioning & checking of Lub oil cooler of BFP- A, B & C |
| 11 | Cleaning of BCW cooling line of BFP Booster pump from the header to inlet & outlet pipe line. |
| 12 | Re-visioning & checking of tube leakage of SWC heat exchanger. |
| 13 | Re-visioning & checking of the tube leakage of BCW heat exchanger.(Cooler) |
| 14 | Re-visioning & checking of tube leakage of SW heat exchanger. (Cooler) |
| 15 | Cleaning of strainer of condensate pumps A, B, & C followed by hydraulic test of compensator if required attending the leakage of compensator and assemble. |
| 16 | O/H of C.W. Booster pump. |
| 17 | O/H of H2 gas cooling pump. |
| 18 | O/H of BCW pump. |
| 19 | O/H of SWC Pump |
| 20 | O/H of SW Pump |
| 21 | O/H of hydrazine Dozing Pump |
| 22 | O/H of Phosphate Dozing Pump |
| 23 | Cleaning of suction strainer of BFP |
| 24 | Cleaning & inside painting of tanks: |
| 25 | Condensate recovery tank. |
| 26 | Condensate storage tank |
| 27 | BCW (-) 4 meter level. |
| 28 | BCW overhead tank |
| 29 | Phosphate tank |
| 30 | Hydrazine tank |
| 31 | SWC tank |
| 32 | O/H of internals of hydraulic coupling |
| 33 | Fabrication & replacement of BFP cooling header (Inlet) with branch line with proper union / flange. |
| 34 | Fabrication & replacement of BFP cooling header (outlet) with branch line with proper union / flange. |
| 35 | O/H of drip pump. |
| 36 | Alignment of hydraulic coupling with motor and pump. |
| 37 | Cleaning of cooling line of drip pump. |
| 38 | Re-vision / replacement of worn out thrust pad of BFP. |
| 39 | Fabrication of seal water cooler body and tithing of tube nest. |
| 40 | Replacement of inside stator assembly of BFP. |
| 41 | Re-adjustment of bearing for replacement of BFP motor |
| 42 | Straighten of condensate pump shaft of BHRC-28 cleaning rectification of thread both end and provide suitable check nut. |
| 43 | Fabrication of expander bellow and fitting. |
| 44 | Installation of fabricated seal water cooler. |
| 45 | Installation of overhauled condensate pump. |
| 46 | Installation / erection of fabricated/ repaired lub oil cooler. |
| 47 | Installation of SW heat exchanger. |
| 48 | Inspection / rectification of fault of BHRC-28 condensate bearing. |
| 49 | Re-visioning & checking of control block of scoop tube. |
| 50 | O/H of Air Washer Blower |
| 51 | O/H of Air Washer Pump |
| 52 | Tank clean/repl of nozle O/H filter/v/v |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedCorrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
CompletedBid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender