Uttar Pradesh Power Transmission Corporation Limited-UPPTCL has published Tender For Maintenance And Repair Works At Various Voltes Transmission Substations Under Jurisdiction Of Electricity Transmission Circle, Meerut.. Submission Date for this Tender is 06-06-2024. Transmission Line Tenders in meerut Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Cartage of ballast,Kankar,Coal grit or sand etc. including loadingand unloading but excluding stacking at pucca roads.3.01 (a) For 1st km. |
| 2 | Excavation in foundation in ordinary soil (Loam Clay or Sand) including lift upto 1.5m and lead upto 30m and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of the foundation work.(CSI No. 4.01) |
| 3 | Earth work in cutting or in embankment in ordinary soil, excavation to be in the form of regular pits, not exceeding 0.5M in depth and earthwork in embankment to be in 20cm layers, including ramming & dressing the surface to reqd. levels and slopes.(CSI No. 4.03) |
| 4 | Add to Earth work item (SI No. 4.01 to 4.03) for every additional 30m lead or partthereof or for every additional 1.5M lift or part thereof. (CSI No. 4.04) |
| 5 | River Bed Fine Sand filling in plinth including supply of necessary quantity of fine sand from outside the UPPCL premises including watering, dressing etc. Rate to include cost of all materials, labour and T&P etc. required for proper completion of work.(CSI No. 4.05) |
| 6 | Excavation in foundation in soil mixed with gravel and boulder requiring the use of special T&P such as pickaxes, sabbals etc including lift upto 1.5m and lead upto 30m and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of the foundation .(CSI No. 4.06) |
| 7 | Clearing jungle including uprooting of rank vegetations,grass, bush,wood, trees and saplings of girth upto 30cm measured at a height of 1.0m above ground level and removal of rubbish upto a distance of 50m outside the periphery of UPPCL area cleared. (CSI No. 4.08) |
| 8 | Cleaning of grass and removal of rubbish upto a distance of 50 Moutside the UPPCL area cleaned. (CSI No.4.09) |
| 9 | Levelling and dressing and making proper slopes including cuttingand filling of earth upto a depth 100mm if so required includingall labour T&P etc. required for proper completion of the work . (CSI No. 4.11) |
| 10 | Concrete with 4cm gauge I class brickballast, coarse sand and cement in proportion of 12:6:1 in foundations and under floors including supply of all materials, labour and tools and plants etc. required for proper completion. (CSI No.5.01 ) |
| 11 | Concrete with 4cm gaugestone ballast, coarse sand& cement in proportion of 12:6:1 in foundations &under floors including supply of all materials, labour and tools and plants etc. required for proper completion. (CSI No. 5.02) |
| 12 | Concrete with 4 cm gauge 1st class brick ballast, coarse sand and cement in proportion of 8:4:1 in foundation & under floors including supply of all materials, labour & T&P etc. complete. (CSI no. 5.04) |
| 13 | Concrete with 4cm gaugestone ballast, coarse sandand cement in proportion of 8:4:1 in foundation & under floors including supply of all materials, labour & T&P etc. complete. (CSI no. 5.04a) |
| 14 | Concreting of 40 mm thick RCC trench covers in mild steel framework with RCC 1:1.5:3 in Cement, coarse sand and 2cm gaugegraded hard stone ballast with 3mm thick floating coat of neatcement finish on top of cover complete with all labour, materials and placing the same in proper position at required location of cable trench within the substation area. (CSI No. 5.18) |
| 15 | Add to CSI no. 5.18 for every extra 5mm or part thickness oftrench covers. (CSI No. 5.19) |
| 16 | Concrete work with 40 mm gauge brick ballast obtained from breaking brick bats (brick bats supplied by the department free of cost) in proportion of 12:6:1 as in CSI no. 5.01 includingcost of all labour,materials, T&P etc required for proper completion of work. (CSI No. 5.20) |
| 17 | Cement concrete with 2cm gauge approved hard stone ballast,coarse sand and cement in proportion of 3:1.5:1including supply of all materials, labour,side shuttering ifrequired and T&P etc. required for proper completion of work(CSI No. 5.21) |
| 18 | Precast cement concrete door sills, chaukhats boundary posts,shelves and similar small work with cement, approved coarse sand and 2 cm gauge graded approved hard stone ballast in the proportion 1:1.5:3, excluding reinforcement but including fixig the same in position including cost of all other material, labour and T&P . (CSI No. 5.22) |
| 19 | RCC work with cement, approved coarse sand and2 cm gauge graded approved hard stone ballast like granite, quartzite etc from Dalla, Jhansi or other quarries in proportion 1:1.5:3in lintels of doors and windows, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P.(CSI No. 5.23) |
| 20 | RCC work with cement, approved coarse sand and2 cm gauge graded approved hard stone ballast like granite, quartzite etc from Dalla, Jhansi or other quarries in proportion 1:1.5:3inslab, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P (CSI No. 5.24) |
| 21 | RCC work with cement, approved coarse sand and2 cm gauge graded approved hard stone ballast like granite quartzite etc from Dalla, Jhansi or other quarries in proportion1:1.5:3 in raft foundation and footings , excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P.(CSI No. 5.27) |
| 22 | RCC work with cement, approved coarse sand and2 cm gauge graded approved hard stone ballast like granite quartzite etc from Dalla, Jhansi or other quarries in proportion 1:1.5:3 inRCC pile caping, gantry walls/columnfoundations and RCC pedestals , excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P. (CSI No. 5.28) |
| 23 | RCC work with cement, approved coarse sandand2 cm gauge graded approved hard stone ballast like granite, quartzite etc from Dalla, Jhansi or other quarries in proportion 1:1.5:3in RCC T beam-slab and column, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P . (CSI No. 5.29) |
| 24 | First class brick work in 1:6 cement and coarse sandmortar in foundation and plinth including supply of allmaterials, labour & T&P etc. required for proper completion of work. (CSI No. 6.01) |
| 25 | First class brick work in 1:4 cement and coarse sand mortar in foundation and plinth including supply of allmaterials, labour & T&P etc. required for proper completion of work (CSI No. 6.03) |
| 26 | First class brickwork in 1:6 cement and coarse sand mortar in superstructure including necessary cutting & moulding of bricks as required for one brick thick wall including supply of allmaterials, labour & T&P etc. required for proper completion of work. including extra labour.( CSI 6.01+6.07+6.08) |
| 27 | First class brickwork in 1:4 cement and coarse sand mortar in superstructure including necessary cutting & moulding of bricks as required for half brick (115mm) thickness wall including supply of allmaterials, labour & T&P etc. required for proper completion of work.including extra labour (CSI 6.03+6.07+6.09) |
| 28 | First class brick work in 1:4 cement and coarse sand mortar in super structure in steps, parapet andfacia including nacessary cutting moulding of bricks andincluding supply of all materials labour & T & P required forproper completion of the work including placing & fixing ofreinforcement in position with 24 B.W.G. binding wire withcentering shuttering complete but excluding cost of reinforcementand its bending which shall be measured separately.(CSI No. 6.17) |
| 29 | Brick work in foundation & plinth with old dismantledbricks (supplied by department free of cost) and coarse sandmortar in 1:6 including supply of all other materials, labour, removing mortar & cleaning of old & used bricks,T&P etc complete.(CSI No. 6.18) |
| 30 | Brick work in super structure for 230 mm brick thick wall with old dismantledbricks (supplied by department free of cost) and coarse sandmortar in 1:6 including supply of all other materials, labour, removing mortar & cleaning of old & used bricks,T&P etc complete.(CSI No. 6.19) |
| 31 | Removal of cement mortar from dismantled bricks and stacking in countable position at place as directed by the Engineer in charge, including cost of all labour and T&P required for proper completion of work. (CSI No. 6.22) |
| 32 | Supply and filling brick bat in soak pit including all labour,material and T&P etc complete. (for 01 soak pit) (CSI No. 6.23) |
| 33 | 2.5 cm. thick damp proof course of cement concrete consisting of 1 part cement 1.5 parts approved coarse sand (F.M.1.8 to 2.5), and3 parts approved 12 mm. graded stone grit and also including liquidwater proofing material as approved by the Engineer-Incharge in the proportions specified by the manufacturer. (CSI No. 7.02) |
| 34 | C.P. Teak wood wrought framed and fixed including simple, mouldings straight work as in Chaukhats including supply of allmaterials, labour and T&P etc.required for proper completion ofthe work. (CSI No. 8.01) |
| 35 | Indian Sal wood wrought framed and fixed including simple, mouldings straight work as in Chaukhats including supply of allmaterials, labour and T&P etc.required for proper completion ofthe work. (CSI No. 8.03) |
| 36 | Supply and fixing of 32 mm. thick Shisham wood part panelled andpart glazed door and window shutter including supply and fixing ofwooden cleats and stoppers and including fixing and adjustment ofhinges bolts, locks, handles, springs and/or other fittings but excluding their supply and including fixing the glass panes with putty and necessary screws (Glass panes to be 4 mm thick.)(CSI No. 8.25) |
| 37 | Supply and fixing of 32 mm. thick Shishum wood fully panelled. door and window shutter including supply and fixing ofwooden cleats and stoppers and including fixing and adjustment ofhinges bolts, locks, handles, springs and/or other fittings but excluding their supply and including fixing the glass panes with putty and necessary screws (Glass panes to be 4 mm thick.)(CSI No. 8.26) |
| 38 | Supply and fixing of 32 mm. thickShishum wood fully glazed. door and window shutter including supply and fixing ofwooden cleats and stoppers and including fixing and adjustment ofhinges bolts, locks, handles, springs and/or other fittings but excluding their supply and including fixing the glass panes with putty and necessary screws (Glass panes to be 4 mm thick.)(CSI No. 8.27) |
| 39 | Supply and fixing of 35 mm. thick C.P.Teak wood door and window Jali shutters withpanels of heavy quality galvanized iron wire mesh of size 14 x 24 withnecessary beading including supply and fixing of wooden cleats and stopsand including fixing and adjustment of hinges. but excluding supply of fixtures. (CSI No. 8.38) |
| 40 | S/F Galvanized Mosquitos proof heavy quality iron wire gauge (14x24) over window frames and including supply of Shishum wood battens 8cm x 1cm and including supply and fixing of necessary screws, all materials,labour andT&P etc. required for proper complete.(CSI No. 8.44) |
| 41 | Providing and fixing 1.2 cm thick and 15 cm wide wooden pelmetswith 19 mm dia alluminium curtain rod and bracket, top closed withsame wood plank 1.2 cm thick including fixing with 2.5 x 0.3 cmM.S. flat 20 cm long and plug etc. complete with paintingpolishing or oiling as required made of with Shisham wood (CSI No. 8.49) |
| 42 | Fixing of Departmental doors & windows shutters including supply& fixing of hinges and other fixtures.(excluding their supply) including all materials,labour & T&P etc. required for proper completion of work. (CSI No. 8.51) |
| 43 | S/Fixing of double action floor springs including cutting in floors / RCC slabs and grouting the same with C.C. & finishing the surface properly as and where required under aluminium doors as per direction of Engineer-in-charge.including cost of all other material, labour, tools & plants etc. complete. (CSI No. 8.55)(SOR-2022) |
| 44 | S/Fixing of single action floor springs including cutting in floors / RCC slabs and grouting the same with C.C. & finishing the surface properly as and where required under aluminium doors as per direction of Engineer-in-charge.including cost of all other material, labour, tools & plants etc. complete .(CSI No. 8.56)(SOR 2022) |
| 45 | Supply and fixing of 32 mm thick single leaf flush door shutter ( boiled water resistance, phenol maldehide resin bonded, hot pressed factory made) commercial quality to I.S.2202 part-1 (1983) ISI marked including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges,bolts.locks,handles, springs and other fittings but excluding their supply including all materials,labour & T&P etc. required for proper completion of work. (CSI No. 8.54) |
| 46 | Supply and fixing brass polished hydraulic door closure of approved make & quality its fixing and adjustment with the help of screws, nuts and bolts including supply of all labour, T & P etc. required for proper completion of the work.(CSI No. 8.57) |
| 47 | Supply and fixing Anodized Aluminium Door fittings like 2 no 150 mm handles,2 no 250 mm tower bolt, 1 no stopper and 1 no 12 mm belan including all materials,labour & T&P etc. required for proper completion of work.(CSI No. 8.58) |
| 48 | Supply and fixing Anodized Aluminium Window fittings like 2 no 100 mm handles,2 no 150 mm tower bolt, 1 no stopper including all materials,labour & T&P etc. required for proper completion of work. (CSI No. 8.59) |
| 49 | Providing and fixing in place a full height storage cabinet 600 mm deep made with 19 mm thick ISI marked ply borad, all interior surfaces to finished with pasting of 0.8 mm thick mica and all exterior surfaces to be finshed with pasting of 1 mm thick mica of texture and colour as approved by Engineer in Charge including all labour, T&P, other items like (but not limited to) fevicol, nails screws, higes, sliders,door handles, multipurpose lock of godrej or equivalent rate etc. required for proper completion of works, to be measured interms of front area only.(CSI No. 8.61) |
| 50 | Mild Steel or Iron work in heavy sizes such as trusses built upgates, door frames, record, racks roof work gates etc. wrought torequired form including holes rivetting or welding where necessary and also fixing in proper position and alignment including cost of all materials supplied by contractor.(CSI No. 9.01) |
| 51 | Mild Steel or Iron work in heavy sizessuch as trusses built upgates, door frames, record, racks roof work gates etc. wrought torequired form including holes rivetting or welding where necessary and also fixing in proper position and alignment including cost of all materials when steel is to be provided by the department(CSI No. 9.02) |
| 52 | TMT/Tor steel in plain work such as reinforced concrete orreinforced brick work (when not included in an over all rates)wrought to required shape as necessary including bending forproper completion of the work and including supply of steel its wastage, bend, hooks and authorized overlapping shall be measured. (Steel shall be arranged by the contractor)(CSI No. 9.03) |
| 53 | TMT/Tor steel in plain work such as reinforced concrete orreinforced brick work (when not included in an over all rates)when steel is to be provided by the departmentwrought to required shape as necessary including bending forproper completion of the work and including supply of steel its wastage, bend, hooks and authorized overlapping shall be measured. (CSI No. 9.04) |
| 54 | Mild steel or Iron work in purlins and rafters includingdrilling holes and fixing in position and including supply of allsteel and bolts and nuts, wastage labour and T&P etc required forproper completion of the work. Steel shall not be supplied by department . (CSI No. 9.05) |
| 55 | Dismantling existing barbed wire fencing including making bundlesand stacking etc.complete.(labour rates only) . (CSI No. 9.06B) |
| 56 | Providing and Fixing barbed iron wire fencing including stretching, fixing into the post including all labour, materials and T&P required for proper completion of work. the weight of hot dipped GI barbed wire having 12 SWG - 2 ply wires and 4 point ordinary barbs @ 150 mm (approx) C/C should be 100 gm per Meter. (CSI No. 9.07) |
| 57 | Supplying and fixing rolling shutters of approved make made of 80x1.25 mm. Gauge cold rolled M.S. lathes inter locked through out their inner length and joined together at the end by end lock guides & arrangements for inside and outside locking with push &pull operation complete but excluding the cost of top cover and springs. CSI No. 9.08) |
| 58 | P/F 27.5cm. long wire spring grades 2 forrolling shutters. (CSI No. 9.09) |
| 59 | Providing and fixing top cover rolling shutters.(CSI No. 9.10) |
| 60 | Providing & fixing ball bearing for rolling shutters. (CSI No. 9.11) |
| 61 | Supplyof 25 mm dia.M.S. Anchor bolts (conforming to IS-226) 500 mmlong with base plate(50x50x6 mm)welded with anchor bolts,including its threading upto a length of 10cm. and galvanizing upto 15cm from top, also supply of a pair of galvanized standard nuts with threading including supply of 5mm thick washer and cost of labour material and T&P etc. required for proper completion of the work.(CSI No. 9.14) |
| 62 | Fixing and grouting 25 mmand below dia M.S. Anchor bolt in proper alignment level and setout with the help of a template including supply of all labour T&P etc. reqd. for proper completion of the work. (labour rates only) . (CSI No. 9.15) |
| 63 | Providing and fixing steel glazed window and ventilators ofstandard rolled Mann or Mahavir steel sections conforming to IS7452-1974 as per drawing joints metered & welded with 100x14x3.15 mm holdfast embedded in cement concrete block 15x10x10 cm. Size of 1:3:6 proportion i.e. 1 part of cement 3 part of approved coarse sand & 6 part of graded stone (aggregated 20mm. Nominal size) S/F of glass panes of plain pin headed 4mm. Thick nuts glazing clips and special putty of approved make complete and including a cost of red oxide paint. The fabrication should conform to I.S.1038-1975. (Aluminum beading with rubber packing included). (CSI No. 9.17) |
| 64 | Supply and fixing galvanised mosquito proof jali (16x24 gauge) withM.S. flat of 20 x 3 mm. size, on both sides screwed or welded to windowor door frame.(CSI No. 9.18) |
| 65 | Providing M.S. Frames work, rack etc for R.C.C. Trench covers and edging with M.S. angles and M.S reinforcement including cutting, bending and welding as per approved drawing. Therate is including cost of all labour, materials etc. as required for proper completion of the work.(CSI No. 9.20) |
| 66 | S/F welded wire mesh size 75x25mm and rectangularmade out of 10 SWG over M.S. angle frame with M.S. flat welded as required including cost of drilling holes, washer welding etc as required including cost of all material, labourand T&P etc. required for proper completion of work . except cost of M.S angle and flat. (CSI No. 9.22) |
| 67 | S/F 50x50mm, 8 gauge G.I. chain link fencing 1.8 Mhigh including fixing to vertical posts, horizontal runners with 10mm dia.40mm long bolts, nuts and washers complete with all material, labour and T&P etc. required for proper completion of work. Chain link of 8 gauge shall be galvanized by hot dipped method as per relevant IS Code. (Excluding cost of vertical posts and horizontal runners) (CSI No. 9.23) |
| 68 | As per item No 9.23 above but excluding the cost of G.I.chainlink ( Fixing charges only). (CSI No. 9.24) |
| 69 | Grouting of vertical or inclined post of pale/chain/security fencing in truelevel, alignment and in plumb or inclination as required,including cost of all labour, materials and T&P required forproper completion of work. ( Post and concrete for grouting shall be measured separately) (CSI No. 9.28) |
| 70 | P/F in position collapsible steel shutter with vertical channels 20 x 10 x 2 mm.(3/4" x 3/8"x 1/12") and braced with flat iron diagonals 20 x 5 mm.(3/4" x 3/16") size with top and bottom rails of "T"iron 40 x 40 x 6 mm. (1/2" x 1-1/2" x 1/4") with 38 mm dia steel pullys with bolts, nuts, nuts locking arrangement, stoppers, handles complete including applying a priming coat of approved Red oxide paints. (CSI No. 9.29) |
| 71 | Fixing and grouting of trench edging in proper level andalignment including cost of all labour, and T&P etc. required forproper completion of the work but excluding cost of C.C. (labour rates only) . (CSI No. 9.30) |
| 72 | Fixing of template in position level and alignment for groutingof Anchorfor auxiliary structure. (labour rate only). (CSI No. 9.32) |
| 73 | Fixing of cable trench racks in proper position and alignment including cost of all labour, material and T&Petc. required for proper completion of the work (Labour rate only).(CSI No. 9.33) |
| 74 | Providing & fixing 1 mm.thick M.S. sheet garrage door with frameof 40x40x6mm angle iron,diagonal bracings with 50x5 mm flat and 5 mm thick M.S. gusset plates at thejunctions and corners including supply and fixing of necessaryfitting, 2 no lock rail of 16 dia,375 mm long and including pintel hooks at the top and bottom, applying a priming coat of red oxide paint on all sides complete . (CSI No. 9.34) |
| 75 | P/F Concertina coilfencing with required dia. 600 mm upto 3 M height of wall between existing angle iron ‘Y’ shaped placed 2.4 M or 3.0 M apart and with 6 horizontal R.B.T. stud tied with G.I. staples and G.I. clips to retain horizontal including necessary bolts or G.I. barbed wire tied to angle iron all complete ( No. of rounds will be 7 to 8 in one Meter length) as per direction of Engineer I/C with reinforced barbed tape (R.B.T.)/ Spring core (2.5mm thick ) wire of high tensile strength of 165 kg/Sqmm with tape ( 0.52 mm thick ) of supreme make or equivalent and weight 43.478 gm/meter ( cost of MS angle, C.C. blocks shall be paid separately).(CSI No. 9.37) |
| 76 | 6 mm thick Chequered plate trench covers with 40 x 40 x 5 angle support on two sides across the trench section and 12mm dia rectangular reinforcement hook complete with all labour, materials, welding and cutting etc including all T&P required. (CSI No 9.41 ) |
| 77 | Supply and fixing of 6 mm thick grey corrugated asbestos sheet. forroofing fixed in position with J or U bolts 10mm. dia with G.I. Limpet & bitumen washersincluding supply of all Materials, labour,wastage and T&P etc.required for proper completion of the work. (CSI No. 10.03) |
| 78 | Supply and fixing with ridges, valley and gutters of asbestos sheets.fixed with J or U bolts 10mm. dia with G.I. Limpet & bitumen washersincluding supply of all Materials, labour,wastage and T&P etc.required for proper completion of the work. (CSI No. 10.04) |
| 79 | Supply and laying one layer of tar felt or any other equivalent approved material at the junction of wall & roof or at any place as per direction of the Engineer-Incharge including necessary overlap, applying a coat of approved mastic paint below the Tar felt & including supply of all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 10.06) |
| 80 | Making expansion joints with 24 gauge Aluminium sheet in walls with necessary cutting shaping of bricks if any & covering joints by 10 mm Ply wood , 150 mm wide. (CSI No. 10.08) |
| 81 | Supply and fixing 50 mm dia 150 mm long G.I. pipe in chhajja as spout including supply of all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 10.10) |
| 82 | Same as item no. 10.10 but of P.V.C. (CSI No. 10.11) |
| 83 | Supply and painting of 85/25 grade bitumen paint over roof @ 1.7 Kg/ sq.m.and spreading 6 mm.size grit over it @ 1 cft /100 Sq.Ft. including sweeping, cleaning the roof with brush, heating the paint to required temterature and supply of all materials, labour and T&P etc. required for proper completion of the work.(CSI No. 10.12) |
| 84 | Supply and fixing 6mm thick polycarbonate multiwall sheet ,fixing in position with J or U bolts 10 mm. dia with G.I. Limpet & bitumen washers including supply of all materials, labour,wastage. and T&P etc. required for proper completion of the work. (CSI No. 10.13) |
| 85 | 12 mm thick plaster with cement mortar consisting of one part of cement & four part of coarse sand (1:4), minimum thickness not to be less then 10 mm including supply of all material, labour and T&P etc for proper completion of work. (CSI No. 11.07) |
| 86 | 12 mm thick plaster with cement mortar consisting of one part of cement & six part of coarse sand(1:6),minimum thickness not to be less then 10 mm including supply of all material, labour and T&P etc for proper completion of work.(CSI No. 11.09) |
| 87 | Add for extra labour to all items of plaster if done in ceiling. (CSI No. 11.10) |
| 88 | Rough cast finish to plasters of different mortars,add extra toplaster items.(CSI No. 11.11) |
| 89 | Add for extra labour and materials for plaster over rough face ofone brick thick wall. (CSI No. 11.12) |
| 90 | 2 cm. thick cement plaster in dado or skirting in 1:2 consisting of onepart of cement and two parts of approved coarse sand laid inpanels finished with 3mm.floating coat of neat cement or cementand marble dust in ratio of 5:1 including supply of all materials, labour & T&P etc. required for proper completion of the work. (CSI No.11.13) |
| 91 | Engraving lines in the plaster of the outer face wall verticallyand horizontally to display the surface as stone facing asdirected by the engineer incharge including labour and T&P etc.required for proper completion of the work (Add for extra labour and T&P etc. required for proper completion of the work (Add for extra labour to all items of plaster).(CSI No. 11.14) |
| 92 | S/mixing approved water proofing compound (CICO,DR FIXIT etc) in cementmortar in plaster or concrete work in the proportion as recommended by the manufacturer.(CSI No. 11.15) |
| 93 | Providing (12x15) mm section groove in plasterincluding all material, labour andT&P etc. required for proper completion of the work. (CSI No. 11.16) |
| 94 | 6 mm. thick plaster with 1:3 cement & coarse sand includinglabour, materials & T&P etc. required for proper completion ofthe work. (CSI No. 11.17) |
| 95 | Champering the edge of concrete in auxiliary structure, of size 25 mm wide in triangular section including all materials, labour & T&P etc complete. (CSI No.11.18) |
| 96 | Making drip coarse (25x12) mm in 1:2 cement and coarse sandincluding supply of all materials, labour and T&P etc requiredfor proper completion of work.(CSI No. 11.19) |
| 97 | 3 mm thick floating coat of neat cement finish including supply of all materials,labour and T&P etc. required for proper completion of the work.( cement consumption 0.044 bag/Sq.m.) (CSI No. 11.20) |
| 98 | First class bricks on edge floor laid dry, joints sand filled,including preparation of base to proper slope and its rammingincluding supply of all material labour & T&P etc. required forproper completion of the work.(CSI No. 12.07) |
| 99 | First class bricks on laid flat dry, joints sand filled,including preparation of base to proper slope and its rammingincluding supply of all material labour & T&P etc. required forproper completion of the work. (CSI No. 12.08) |
| 100 | Straight over burnt bricks on edge floor laid dry, joints sand filled,including preparation of base to proper slope and its rammingincluding supply of all material labour & T&P etc. required forproper completion of the work.(CSI No. 12.09) |
| 101 | Supply and Laying 8 mm thickglazed floor tiles of Somany, Johnson or equivalent make, , laid with1:3 cement and approved coarse sand mortar finished with whitecement slurry, jointing and polishing complete, including supplyof all materials, labour and T&P etc. required for proper completion of the work.(CSI No. 12.11) |
| 102 | Supply and Laying 6 mm thickglazed tiles in skirting / dado laid with1:3 cement and approved coarse sand mortar finished with whitecement slurry, jointing and polishing complete,including supplyof all materials, labour and T&P etc. completion required for proper completion of the work.(CSI No. 12.12) |
| 103 | Providing and fixing glass strips of 3.15 mm thickness & 25mm depth in jointsof floor and skirting at the time of laying floors, flush withfloor level including supply of all materials, labour& T&P etc.required for proper completion of work.(CSI No. 12.13) |
| 104 | Providing and fixing glass strips of 3.15 mm thickness & 40mm depth in jointsof floor and skirting at the time of laying floors, flush withfloor level including supply of all materials, labour& T&P etc. required for proper completion of work. (CSI No. 12.14) |
| 105 | First class brick on edge floor-laid in cement mortar consisting of one part of cement and six parts of coarse sand and pointed with cement mortar 1:2 over and including all materials, labour, T&P etc.required for proper completion of work. (CSI No. 12.15) |
| 106 | Providing and laying18mm. thickKotastonein flooring or skirtingoverbasecementmortar 1:4 mix and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete and including supply of all materials labour and T&P etc required for proper completion of the work. (CSI No. 12.17) |
| 107 | Providing and laying floor of 8 mm thick vitrifiedtiles in flooring or skirting of approved brand (Bell, Johnson or equi. make)size of 600x600 mmof approved shade, colour and pattern , laid over base cement mortar 1:4 mix including finishing the joints with white cementmixed with pigment to match the shade of tile including cost of all material, labour and T&P required for proper completion of the work. (CSI No. 12.18) |
| 108 | Providing and laying floor of 8 mm thick vitrifiedtiles in flooring or skirting with adhesive of approved brand (Bell, Johnson or equi. make)size of 600x600 mmof approved shade, colour and pattern , on existing smooth floor ,including finishing the joints with white cementmixed with pigment to match the shade of tile including cost of all material, labour and T&P required for proper completion of the work.(CSI No. 12.19) |
| 109 | Providing and laying of 16 mm thick granite ( black/ brown) inflooring or skirting ,of approved shade, colour,size and pattern , laid over base cement mortar 1:4 mix including finishing the joints with white cementmixed with pigment to match the shade of granite floor including cost of all material, labour and T&P required for proper completion of the work, as per direction of Engineer incharge. (CSI No.12.20) |
| 110 | S/F 10mm thick Group 25 acid resisting tiles of “Somany” or equivalent approved make in flooring or skirting (confirming to I.S. 4457 - 1967) in ordinary Portland cement and coarse sand in ratio 1:3 with the joints filled with acid resistant cement “Accocide” of A.C.C. or equivalent make acid resistant cement and liquid supplied with cement, mixed in 1:3 ratio to make a workable paste in G.I. Tray. The joints should be kept as 5mm and to be cured for 7 days with dilute HCL (One part acid and three parts of water). Rate should be including the cost of all materials, labour and T&P etc. required for proper completion of the work.(CSI No. 12.22) |
| 111 | Supply of 80 mm thick I shaped mechanically compressed inter locking cement concrete paver block manufactured by high pressure & controlled vibration machine having plan dimension 200X(160+120 mm) with minimum 5 mm thick toping of O.P.Cement mixed with 25% marble powder. The compressive strength of concrete pavers blocks shall not be less than 30 MPa & 4.5 Kg/No. including cost of all material, labour, T&P etc. required for proper completion of work as directed by Engineer-in-charge but excluding G.S.T. which shall be paid extra as per rules. (CSI No.12.23) |
| 112 | 2.50 cm thick 1:1.5:3 cement concrete floor with cement, approved coarse sand & 2cm graded approved stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified and removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish including supply of all materials, labour and T&P etc, required for proper completion of the work. without base CC. (CSI No. 12.26) |
| 113 | 4.0 cm thick 1:1.5:3 cement concrete floor with cement, approved coarse sand & 2cm graded approved stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified and removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish including supply of all materials, labour and T&P etc, required for proper completion of the work. without base CC. (CSI No. 12.28) |
| 114 | Providing and laying of 16 mm thick baroda green stone in flooring or skirting,of approved shade, colour,size and pattern , laid over base cement mortar 1:4 mix including finishing the joints with white cementmixed with pigment to match the shade of granite floor including cost of all material, labour and T&P required for proper completion of the work, as per direction of Engineer incharge.(CSI No.12.30) |
| 115 | Painting or varnishing new iron work in small areas or new woodwork with one coat of ready mixed priming paint and one coat ofapproved superior quality ready mix paint "Luxol" or equivalentbrand or varnish including supply of all materials, labour and T&P etc. required for proper completion of the work. Paint to be used should conform to the I.S. 103-1950.(CSI No. 13.01) |
| 116 | Painting every coat after first coat ofapproved superior quality ready mix paint "Luxol" or equivalentbrand or varnish including supply of all materials, labour and T&P etc. required for proper completion of the work. Paint to be used should conform to the I.S. 103-1950 (CSI No. 13.02) |
| 117 | Painting or varnishing new iron work in small areas previously paintedold wood or iron work coat ofapproved superior quality ready mix paint "Luxol" or equivalentbrand or varnish including supply of all materials, labour and T&P etc. required for proper completion of the work. Paint to be used should conform to the I.S. 103-1950.(CSI No. 13.03) |
| 118 | Painting roofs or other iron workwith one coat of ready mixedpriming coat of approved make (redboxide) including., supply of all materials, labour & T&P etc for proper completion of work. (CSI No. 13.04) |
| 119 | Painting roofs or other iron workevery coat after first coat of ready mixedpriming coat of approved make (red oxide) after first coat including., supply of all materials, labour & T&P etc for proper completion of work. (CSI No. 13.05) |
| 120 | Painting roofs or other iron workfor every coat on previously painted old surface approved make (redboxide) including., supply of all materials, labour & T&P etc for proper completion of work.(CSI No. 13.06) |
| 121 | Removing paint or varnish with paint remover or with caustic soda including supply of all materials,labour and T&P etc. required for proper completion of the work. (CSI No. 13.07) |
| 122 | One priming coat and one coat oil bound distemper on new work includingsupply of all materials,labour and T&P etc. required for propercompletion of the work. (CSI No. 13.08) |
| 123 | Every coat after first Coat of oil bound distemperincludingsupply of all materials,labour and T&P etc. required for propercompletion of the work.(CSI No. 13.09) |
| 124 | Onecoat oil bound distemper on previously old oil bound distemper surface includingsupply of all materials,labour and T&P etc. required for propercompletion of the work. (CSI No. 13.10) |
| 125 | Finishing walls with water proof cement paint of approved madelike "Super Snowcem" or equivalent quality on new work withtwo coats to give an even shade including supply of allmaterials, labour etc. required for proper completion of work. (CSI No. 13.17) |
| 126 | Same as in item 13.17 but for each coat of water proof cement paint after the first two coats to give an even shade. (CSI No. 13.18) |
| 127 | Same as in item 13.17 but for each coat of water proof cement paint. on previously treated surface.(CSI No. 13.19) |
| 128 | Applying Birla or equivalent putty on new interior or exterior surface over one coat of water based cement primer of ICI or equivalent brand for smoothening and levelling of the surface as per requirement and direction of Engineer I/C including cost of all material, labour, T & P etc required for proper completion of work. (CSI No. 13.20) |
| 129 | Applying BIRLA PUTTY or equivalent putty on previousaly birla putty smoothen surface over one cost of water base cement primer of ICI or equivalent brand for smoothining and leveling of the surface as per requirement and direction of E/I including cost of all material , labour and T&P required for proper completion of work.(CSI No.13.21) |
| 130 | Painting one coat with APEX or equivalent brand weather coat paint on new wall surfaces (well prepared with Birla putty and one coat of primer ICI or equivalent which shall be paid separately) including through washing with water including cost of all materials, labour, T&P required for proper completion of work. (CSI No. 13.22) |
| 131 | Paintingevery coat after first coat with APEX or equivalent brand weather coat paint on including through washing with water including cost of all materials, labour, T&P required for proper completion of work. (CSI No. 13.23) |
| 132 | Painting one coat with APEX or equivalent brand weather coat paint on previousaly painted surfaces (well prepared with Birla putty and one coat of primer ICI or equivalent which shall be paid separately) including through washing with water including cost of all materials, labour, T&P required for proper completion of work. (CSI No. 13.24) |
| 133 | Painting one coat with Acrylic emulsion paint of Berger/ Asian/ ICI or equivalent paint (Paint and water in the ratio 1:1 by volume) over prepared and primednew surface of cement concrete, cement plaster and bricks including all labour, material and T&P etc required for proper completion of the work, (preparation of base with Birla putty etc. and a coating of primer shall be paid extra) .(CSI No. 13.25) |
| 134 | Painting every coat after first coat with Acrylic emulsion paint of Berger/ Asian/ ICI or equivalent paint (Paint and water in the ratio 1:1 by volume) over prepared and primed. (CSI No. 13.26) |
| 135 | Painting one coat with Acrylic emulsion paint of Berger/ Asian/ ICI or equivalent paint (Paint and water in the ratio 1:1 by volume) on previously painted wall surfacesover prepared and primed surface of cement concrete, cement plaster and bricks including all labour, material and T&P etc required for proper completion of the work, (preparation of base with Birla putty etc. and a coating of primer shall be paid extra) . (CSI No. 13.27) |
| 136 | Painting letters & number over cable trench cover or other places with the help of stencils including painting of base of 150 mm. dia of one coat of primer and two coats of superior quality synthetic enamel paint size of letter to be 60 mm. x 10 mm. including cost of all materials labour and T&P etc. required for proper completion of the work including placing of Trench covers in required position (CSI No. 13.28) |
| 137 | Spirit polish over previously polished wood surfaceafter rubbing down the surface, withsand paper to give smooth and shining surface including cost ofall materials, labour, T&P required for proper completion of thework.(CSI No. 13.30) |
| 138 | Cement washing one coat with slack lime in ratio 1:2 (Cement : lime ) including supply of all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 14.09) |
| 139 | Cement washing every coat after one caotwith slack lime in ratio 1:2 (Cement : lime ) including supply of all materials, labour and T&P etc. required for proper completion of the work.(CSI No. 14.10) |
| 140 | Dismantling brick work or stone work in lime or cement mortar andincluding stacking of materials as directed by theEngineer-in-charge within a distance of 60 metres.(CSI No. 15.01) |
| 141 | Dismantling brick work or stone work in mud mortor andincluding stacking of materials as directed by theEngineer-in-charge within a distance of 60 metres. (CSI No. 15.02) |
| 142 | Dismantling reinforced cement concrete or reinforced brick work,including stacking of dismantled materials as directed by theEngineer-Incharge within a distance of 60 metres. (CSI No. 15.03) |
| 143 | Dismantling Jack arched or wooden beam and barga roofs includingbeam roof concrete only and including stacking of dismantledmaterials as directed by the Engineer incharge within a distanceof 60 metres. (CSI No. 15.04) |
| 144 | Dismantling cement concrete or brick or granolithic floorsincluding base concrete and including stacking of dismantledmaterials as directed by the Engineer In-charge within a distanceof 60 metres. (CSI No. 15.05) |
| 145 | Dismantling corrugated iron & asbastas roof sheet andstacking of materials as directed by Engg-in-charge within a distance of 60 mtrs. (CSI No. 15.07) |
| 146 | Dismantling of griders, trusses and other steel works including stcking of materials as directed by Engg-in-charge within a distance of 60 mtrs.(CSI No. 15.08) |
| 147 | Dismantling doors or window leaves including stacking ofmaterials as directed by the Engineer I/C within a dist. 60 M. (CSI No. 15.09) |
| 148 | Dismantaling doors and windowschowkhatsincluding stacking of materials as directed by Engg-in-Charge within a distance of 60 meters. (CSI No. 15.10) |
| 149 | Dismantling existing plaster including disposal of refuse asdirected by the Engineer-I/C within a distance of 60 M. (CSI No. 15.11) |
| 150 | Scrapping old white or colour wash or distemper including disposal of refuseas directed by the Engineer-I/C within a distance of 60 M. (CSI No. 15.12) |
| 151 | Dismantling of existing pale / security / chain link fencingincluding post and stacking properly as per direction of theEngineer - in - charge. Including all labour and T&P etc.required for proper completion of the work. (CSI No. 15.13) |
| 152 | Dismantling of existing damaged Mud Faska over the roof. Cleaning the surface with wire brush, removal and disposal of rubbish at adistace 100 Meters also including the cost of cleaning and stacking of usable materials etc., including all labour, material required for proper completion of work. (CSI No. 15.14) |
| 153 | Dismantling of existing R.C.C. Gantry/ Auxiliary foundation with the help of mechanical means in switchyard including disposal of refuse/ debris as per direction of Engineer - in - charge. Including all labour and T&P etc. required for proper completion of the work. (CSI No. 15.15) |
| 154 | Dismantling ofdry B.O.E. Floor and proper stacking of dismantled bricks as per direction of E/C. up to 60 m lead. (CSI No. 15.16) |
| 155 | Dismantling ofdry flat brick soling Floor and proper stacking of dismantled bricks as per direction of E/C. up to 60 m lead . (CSI No. 15.17) |
| 156 | Dismantling and re-laying of dry B.O.E. floor including cost of all labour and T&P required forproper completion of work.(labour rates only) (CSI No. 15.18) |
| 157 | Dismantling and re-laying of dry flat brick soling.. floor including cost of all labour and T&P required forproper completion of work.(labour rates only) (CSI No. 15.19) |
| 158 | Pre-Construction anti-termite treatment, by creating a barrier under and around the columns pits, foundation trenches, under floors, junctions of Walls &floors, around the external perimetre of building, expansion joints, surrounding of pipes and conduits etc. (Plinth area of the building at ground floor only shall be measured as per I.S. 6313 (Part II 1981))with Eldrine emulsifiable 0.2% concentration or any other approved material such as Heptachlore or chlordance will be used. The consumption of emulsion shall be (i) Foundation and masonary @ 5 Ltrs/Sqm, (ii) Back fills in immediate contact of foundation@ 7.5 Ltrs. / Sqm, (iii) Top surface of Plinth filling @ 5 Ltrs / Sqm, ( iv) Junction of walls & floors @ 7.5 Ltrs / Sqm, (v) Soil along external perimetre of building @ 7.5 Ltrs / Sqm (vi) under apron of the building @ 5 Ltrs. /Sqm. The rates includes cost of all materials, labour, equipments, T&P complete.(CSI No. 17.01) |
| 159 | Cleaning of existing W.B.M. surface & laying premix 40mm thick over a tack coat with graded approved grit, heating the paint to the required temperature & mixing either in mixture or hand drums including cartage of mixture or hand drums and, maintenance of side patries and watering them during operation and including supply of all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 18.08) |
| 160 | Laying seal coat with 6 mm size graded stone grit and bitumen including heating the bitumen paint to required temperature including cartage and cost of materials, labour, T&P etc. required for propercompletion of work.(CSI No. 18.09) |
| 161 | Scraping old painted surface including disposal of scraped material to a distance of 30 m. (100") as directed by Engineer - in - charge. (CSI No. 18.10) |
| 162 | Laying cement concrete road slab in 1:1.5:3 consisting of 1 part cement 1.5part approved coarse sand and 3 part approved 20mm down graded stone aggregate over prepared sub grade after its rectification and bringing it to proper camber and shape,finishing with TRIMIX machine ,concrete hardner and making good to the satisfaction of E/I inclduing cost of all materials, labour and T&P etc. required for proper completion of the work . (CSI No. 18.13) |
| 163 | Filling of 20 mm. wide 100/150 mm. deep joint with coarse sand and saw dust mixed with hot bitumen etc. complete including supply of all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 18.14) |
| 164 | Providing and fixing 12mm thick particle board of commercial quality 125 mm deep for making partitions of C.C. road slab as per direction of E/I. including cost of all material, labour and T&P required for proper completion of work. (CSI No. 18.15) |
| 165 | Providing and laying non-pressure NP3 class RCC pipes with collars with stiff mixture of cement mortar in the proportion 1:2 (1-Cement, 2-Coarse sand) including testing of joints including cost of all material, labour, T&P etc. required for proper completion of the work.(CSI No. 18.16) a- 150 mm dia RCC pipe |
| 166 | Providing and laying non-pressure NP3 class RCC pipes with collars with stiff mixture of cement mortar in the proportion 1:2 (1-Cement, 2-Coarse sand) including testing of joints including cost of all material, labour, T&P etc. required for proper completion of the work.(CSI No. 18.16) b- 300 mm dia RCC pipe |
| 167 | Providing and laying non-pressure NP3 class RCC pipes with collars with stiff mixture of cement mortar in the proportion 1:2 (1-Cement, 2-Coarse sand) including testing of joints including cost of all material, labour, T&P etc. required for proper completion of the work.(CSI No. 18.16) c- 600 mm dia RCC pipe |
| 168 | Providing and laying non-pressure NP3 class RCC pipes with collars with stiff mixture of cement mortar in the proportion 1:2 (1-Cement, 2-Coarse sand) including testing of joints including cost of all material, labour, T&P etc. required for proper completion of the work.(CSI No. 18.16) d- 900 mm dia RCC pipe |
| 169 | Analysis of Rate for Construction of granular sub-base (GSB) by providing well graded Materialspreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC and compacting with smooth wheel roller to achieve the desired density complete as per the direction of Engineer In Charge.(CSI No. 18.17) |
| 170 | Analysis of Rate for providing, laying and spreading of graded stone aggregate water mixed macadam (WMM/WBM ) after mixing with water at OMC in mechanical mix plant , carriage of mixed material upto site by tipper, laying with1 % PPC Cement and 3.5 % emulsion in uniform single layer on sub base /subgrade and compacting with road roller to acheive desired density complete as per the direction of Engineer In Charge. (Taking Output -225 Cum i.e. 495 Tonne )(CSI No. 18.18) |
| 171 | Analysis of Rate for providing and applying tack coat with VG_10 using bitumen distributor at the rate of 0.35 Kg Per Sqm on the prepared surface cleaned with hydraulic broom complete as per the direction of Engineer In Charge. (Taking Output -3500 SQM )(CSI No. 18.19) |
| 172 | Providing andlaying dense bituminous macadam (DBM) with 100-120 TPH batch type HMP producing an average out put of 75 Tonne per hour using crushed stone aggregate of specified grading premixed with bituminous binder as per job mix , tranporting and placing the hot mix complete as per the direction of Engineer In Charge. (Taking Output -195 Cum i.e. 450 Tonne )(CSI No. 18.20) |
| 173 | Developing the tubewell by the air compressor having a capacity of 8.5 CuM or by the borehole pumping set having the capacity of 0.7 CuM/sec as per direction of Engineer I/C. (CSI No. 19.01) |
| 174 | Arranging Chemical and bacteriological test of water from reputed lab and submission of report to E/I. (CSI No. 19.02) |
| 175 | Development of tubewell by O.P. Unit (5 HP to 10 HP submersible pump set), including bringing Column pipe for the OP unit, assembling, electric connections, running for required period, dismentling and taking out & carrying away and cleaning the site with cost of all labour, materials, T&P and fuel / Electricity Charges etc required for proper completion of work and as per direction of Engineer-in-charge. (CSI No. 19.14) |
| 176 | Supply and fixing of G.I. ("B" class ) column pipes JTC/ JINDAL make with column coupling socket as required for proper completion of workincluding all labour material & T&P.(CSI No. 19.22)a)80 mm dia. |
| 177 | Supply and fixing of G.I. ("B" class ) column pipes JTC/ JINDAL make with column coupling socket as required for proper completion of workincluding all labour material & T&P.(CSI No. 19.22)b)65 mm dia. |
| 178 | Supply and fixing of G.I. ("B" class ) column pipes JTC/ JINDAL make with column coupling socket as required for proper completion of workincluding all labour material & T&P.(CSI No. 19.22)c)40 mm dia. |
| 179 | Supply and fixing of G.I. ("B" class ) column pipes JTC/ JINDAL make with column coupling socket as required for proper completion of workincluding all labour material & T&P.(CSI No. 19.22)d)32 mm dia. |
| 180 | Supply and fixing C.I. non-return valveISI marked and approved make with nuts, bolts, packing etc completeincluding all labour material & T&P.(CSI No. 19.23) a)80 mm dia. |
| 181 | Supply and fixing C.I. non-return valveISI marked and approved make with nuts, bolts, packing etc completeincluding all labour material & T&P.(CSI No. 19.23) b)65 mm dia. |
| 182 | Supply and fixing C.I. non-return valveISI marked and approved make with nuts, bolts, packing etc completeincluding all labour material & T&P.(CSI No. 19.23) C)50 mm dia. |
| 183 | Supply and fixing C.I. non-return valveISI marked and approved make with nuts, bolts, packing etc completeincluding all labour material & T&P.(CSI No. 19.23) d)40 mm dia. |
| 184 | Supply and fixing C.I. non-return valveISI marked and approved make with nuts, bolts, packing etc completeincluding all labour material & T&P.(CSI No. 19.23)e)32 mm dia. |
| 185 | Supply and stacking pee gravelproperly at levelled ground for measurement as directed by Engineer I/C, including all labour, T&P required for proper completion of work.(CSI No. 19.25) |
| 186 | Opening and taking out of M.S. column pipe from Tubewell, including all labour,T&P etc. required for proper completion of the work.(CSI No. 19.26) a)80/65 mm dia. |
| 187 | Opening and taking out of M.S. column pipe from Tubewell, including all labour,T&P etc. required for proper completion of the work.(CSI No. 19.26) b)50/40 mm dia. |
| 188 | Opening and taking out of M.S. column pipe from Tubewell, including all labour,T&P etc. required for proper completion of the work.(CSI No. 19.26) c)32 mm dia. |
| 189 | Lowering of M.S. column pipe in tubewell including supply of nuts, and bolts, packing and also carriage of pipe from workshop to site including all labour, T&P etc. required for proper completion of the work.(CSI No. 19.27) a)80/65 mm dia. |
| 190 | Lowering of M.S. column pipe in tubewell including supply of nuts, and bolts, packing and also carriage of pipe from workshop to site including all labour, T&P etc. required for proper completion of the work.(CSI No. 19.27) b)50/40 mm dia. |
| 191 | Lowering of M.S. column pipe in tubewell including supply of nuts, and bolts, packing and also carriage of pipe from workshop to site including all labour, T&P etc. required for proper completion of the work.(CSI No. 19.27) c)32 mm dia. |
| 192 | Supply and installation of 5H.P. Kirloskar or equivalent make single stage, horizontal, self priming,three phase dewatering pumpset of specification Head 14/16 M, Discharge 13.6/10 LPS, solid handle size 15.5 mm, suction 80 mm, delivery 80 mm, RPM 1500 including cost of 80 mm dia G.I. pipe for suction (3M) and delivery (4.5 M).(CSI No. 19.29) |
| 193 | Supply and installation of 0.5 HP Kirloskar or equivalent makehorizontal, self priming, single phase ,monoblock tullu pump including cost of labour, T&P and material required for completion of work.(CSI No. 19.30) |
| 194 | Supply & installation of electrical control panel of L&T / Havells or equivalent make for submersible pump / pumpset containing contractor relay condenser.(CSI No. 19.31) a) for 1 HP pump set single phase |
| 195 | Supply & installation of electrical control panel of L&T / Havells or equivalent make for submersible pump / pumpset containing contractor relay condenser.(CSI No. 19.31) b) for 1.5/ 2 H.P pump set single phase |
| 196 | Supply & installation of electrical control panel of L&T / Havells or equivalent make for submersible pump / pumpset containing contractor relay condenser.(CSI No. 19.31) c) for 3 H.P pump set single phase |
| 197 | Supply & installation of electrical control panel of L&T / Havells or equivalent make for submersible pump / pumpset containing contractor relay condenser.(CSI No. 19.31) d) for 5 H.P pump set three phase |
| 198 | Supply & installation of electrical control panel of L&T / Havells or equivalent make for submersible pump / pumpset containing contractor relay condenser.(CSI No. 19.31) e) for 7.5 H.P pump set three phase |
| 199 | Supply & installation of electrical control panel of L&T / Havells or equivalent make for submersible pump / pumpset containing contractor relay condenser.(CSI No. 19.31) f) for 10 H.P pump set three phase |
| 200 | Supply & installation of electrical control panel of L&T / Havells or equivalent make for submersible pump / pumpset containing contractor relay condenser.(CSI No. 19.31) g) for 15 H.P pump set three phase |
| 201 | Supply & Installation ofsubmersible pump of K.S.B/ CALAMA. or eqt. make including cost of labour, T&P and material required for completion of work.(CSI No. 19.32) a) 1 HP outlet 32 mm dia. or more, Head 78/30,Discharge 1100/2800 LPH |
| 202 | Supply & Installation ofsubmersible pump of K.S.B/ CALAMA. or eqt. make including cost of labour, T&P and material required for completion of work.(CSI No. 19.32) b) 1.5 HP outlet 40mm dia. or more, Head 71/36, Discharge 2000/6000 LPH |
| 203 | Supply & Installation ofsubmersible pump of K.S.B/ CALAMA. or eqt. make including cost of labour, T&P and material required for completion of work.(CSI No. 19.32) c) 2 HP outlet 40mm dia. or more, Head 89/45, Discharge 2000/6000 LPH |
| 204 | Supply & Installation ofsubmersible pump of K.S.B/ CALAMA. or eqt. make including cost of labour, T&P and material required for completion of work.(CSI No. 19.32) d) 3 HP outlet 50 mm dia. or more, Head 60/24, Discharge 6000/14000 LPH |
| 205 | Supply & Installation ofsubmersible pump of K.S.B/ CALAMA. or eqt. make including cost of labour, T&P and material required for completion of work.(CSI No. 19.32) e) three phase 5 HP outlet 50 mm dia. or more, Head 60/24, Discharge 9000/24000 LPH |
| 206 | Supply & Installation ofsubmersible pump of K.S.B/ CALAMA. or eqt. make including cost of labour, T&P and material required for completion of work.(CSI No. 19.32) f)three phase 7.5 HP outlet 65 mm dia. or more, Head 57/46, Discharge 24000/30000 LPH |
| 207 | Supply & Installation ofsubmersible pump of K.S.B/ CALAMA. or eqt. make including cost of labour, T&P and material required for completion of work.(CSI No. 19.32) g) three phase 10 HP outlet 80 mm dia. or more, Head 63/31, Discharge 20000/50000 LPH |
| 208 | Supply & Installation ofsubmersible pump of K.S.B/ CALAMA. or eqt. make including cost of labour, T&P and material required for completion of work.(CSI No. 19.32) h) three phase 15 HP outlet 80 mm dia. or more, Head 57/28, Discharge 30000/65000 LPH |
| 209 | Supply and fixing of submersible cable Havelsor equivalent make, for submersible pump complete in all respect.(CSI No. 19.33) a) 1.5 mm2 for upto 1 H.P. Pump |
| 210 | Supply and fixing of submersible cable Havelsor equivalent make, for submersible pump complete in all respect.(CSI No. 19.33)b) 2.5 mm2 for pumpabove 1 HP and up to 3 HP. |
| 211 | Supply and fixing of submersible cable Havelsor equivalent make, for submersible pump complete in all respect.(CSI No. 19.33)c) 4.0 mm2 for pumpabove 3 HP and up to 7.5 H.P. |
| 212 | Supply and fixing of submersible cable Havelsor equivalent make, for submersible pump complete in all respect.(CSI No. 19.33) d) 6.0 mm2 for pumpabove 7.5 HP and up to 15 H.P. |
| 213 | Supply & fixing of steel wire rope forsubmersible pump including cost of labour, T&P and material required for completion of work.(CSI No. 19.34) |
| 214 | Maintenance of terraced roof including filling up cracks before rain with approved bituminous filler and stopping leaks during rain including supply of all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 20.01) |
| 215 | Repair to plaster or pointing in patches including removal of old plaster 1:4 racking out joints to 1 cm.(3/8") depth,watering the area and then replastering or reappointing with the same mortar or proportion of mortar as the existing surface including supply of all materials, labour and T&P etc. required for proper completion of the work .(CSI No. 11.07+20.02) |
| 216 | Repair to 2.5 cm (1") cement concrete floor in patches including up to 10 cm.(4") depth renewing 8 cm.(3") base concrete consisting of one part cement, 4 parts aproved coarse sand and 8 parts of 4 cm.(1.5") gauge brick ballast as in C.C.floor consisting of one part cement 1.5 parts approved coarse sand and 3 parts approved stone grit including supply of all materials.labour and T&P etc. required for proper completion of the work.( without base)(CSI No. 12.26+20.03) |
| 217 | Renewingpanes of 4.8 to 5.7 mm glass including supply of glass with putty and brads including supply of all materials, labour and t&P etc. required for proper completion of the work.(CSI No. 20.04) (a) glass of 5 mm thick panes. |
| 218 | Renewingpanes of 4.8 to 5.7 mm glass including supply of glass with putty and brads including supply of all materials, labour and t&P etc. required for proper completion of the work.(CSI No. 20.04) (b) glass of 4 mm thick panes |
| 219 | Renewingpanes of 4.8 to 5.7 mm glass including supply of glass with putty and brads including supply of all materials, labour and t&P etc. required for proper completion of the work.(CSI No. 20.04)(c) glass of 3 mm thick panes |
| 220 | Easing door and windows. (CSI No. 20.05) |
| 221 | Renewing door cleats including supply of all materials,labour & T&P etc. required for proper completion of the work. (CSI No. 20.06) |
| 222 | Fixing panes of glass with and including putty brads and including supply of all materials,labour and T&P etc. required for proper completion of the work but excluding cost of glass. (CSI No. 20.07) |
| 223 | Fixing panes of glass with wooden beading and including supply of all materials,labour and T&P etc. required for proper completion of the work but excluding cost of glass. (CSI No. 20.08) |
| 224 | Cleaning panes of glass with spirit of caustic soda including supply of all materials,labour and T&P etc.required for proper completion of the work.(CSI No. 20.09) |
| 225 | Labour for fixing door bolts or hinges or tower bolts or hasp and staples or handles etc.to doors and window. (CSI No. 20.10) |
| 226 | Placing of trench cover of all size in proper position including transportation from different places within the S/S area including all labour, T&P etc. required for proper completion of the work as per direction of Engineer - in - charge. (CSI No. 20.11) |
| 227 | Cleaning of septic tank including disposal of waste out side the UPPCL area as per direction of the Engineer-in-charge including cost of all labour,T&P etc.required for proper completion of the work.(CSI No. 20.12) |
| 228 | Cleaning of inspection chamber including disposal of waste out side the UPPCL area as per direction of the Engineer-in-charge including cost of all labour,T&P etc.required for proper completion of the work. (CSI No. 20.13) |
| 229 | Cleaning of main drain or width more than 300 mm.including disposal of waste refuses sludge out side the board"s area including washing and cleaning by clean water completely as per direction of the Engineer-in-charge including cost of all labour,T&P etc.required for proper completion of the work.(CSI No. 20.14) |
| 230 | Cleaning of main drain or width less than 300 mm including disposal of waste refuses sludge out side the board"s area including washing and cleaning by clean water completely as per direction of the Engineer-in-charge including cost of all labour,T&P etc.required for proper completion of the work. (CSI No. 20.15) |
| 231 | Disposal of rubbish / debris out side the UPPCL area as per direction of Er/in- charge including cartage, labour and materials, T&P etc. required for proper completion of the work. (No. deduction for voids shall be made).(CSI No. 20.16) |
| 232 | Supply and replacing of following chromium polished iron fittings including cost of nuts, bolts etc.complete.(CSI No. 20.17)(a) L drops 16 mm dia x 300 long. |
| 233 | Supply and replacing of following chromium polished iron fittings including cost of nuts, bolts etc.complete.(CSI No. 20.17)(b)Tower bolts 10 mm dia x 250 mm long. |
| 234 | Supply and replacing of following chromium polished iron fittings including cost of nuts, bolts etc.complete.(CSI No. 20.17)(c)Tower bolts 10 mm dia x 100 mm long. |
| 235 | Supply and replacing of following chromium polished iron fittings including cost of nuts, bolts etc.complete.(CSI No. 20.17)(d)Iron hinges 100 mm size.12 gauge.thick |
| 236 | Supply and replacing of following chromium polished iron fittings including cost of nuts, bolts etc.complete.(CSI No. 20.17)(e) Iron door spring. |
| 237 | Supply and replacing of following chromium polished iron fittings including cost of nuts, bolts etc.complete.(CSI No. 20.17)(f) M.S.handles 100 mm size |
| 238 | Supply and replacing of following chromium polished iron fittings including cost of nuts, bolts etc.complete.(CSI No. 20.17)(g) M.S. chain kunda. |
| 239 | Supply and replacing of following chromium polished iron fittings including cost of nuts, bolts etc.complete.(CSI No. 20.17)(h) L-drop 16 mm dia x 200 mm long. |
| 240 | Cleaning and opening of chocked W.C./ bath / kithchen pipe line including opening and refixing of chamber cover including washing etc. complete.(Analysis based on NBO - 11 25.020.(CSI No. 20.19) |
| 241 | Opening, cleaning, overhauling, oiling and greasing of defective rolling shutter and also re setting of its springs for its smooth functioning including cost of all materials, labour and T&P etc.( Approx. size of shutter 2x2.5) (CSI No. 20.20) |
| 242 | S/laying chicken mesh of (20 mm.)hexagonal heavy quality over roofs of joints of roof as per direction of the Engineer - in - charge.(CSI No. 20.21) |
| 243 | Extraction of defective choked hand pump machine with variable length of pipe and strainer and reinsertion of complete assembly after its repairing such as welding of pipe handle jhoola and replacing strainer bolts nuts,washers,Rubber seats etc and also cleaning bore ole by boring etc. if necessary.(CSI No. 20.25) |
| 244 | Cleaning of existing pipe line of different dia. ranging from 4" to 2" dia. including digging trenches and refilling, opening of pipes, cleaning of pipes, cutting, threading, if required fixing and including making good the road, wall etc as directed by the engineer I/C.(CSI No. 20.26a) |
| 245 | Cleaning of existing water pipe line of different dia up to 2" dia including digging trenches and refilling,opening and cleaning of pipes,cutting,threading,if required fixing and including making good the road and wall etc. as directed by the Engineer in charge.(CSI No. 20.26b) |
| 246 | Cleaning of R.C.C. over head tank up to capacity of one lac. Liters and chlorinating with bleaching power mixed to water as per direction of Engineer - in - charge complete.(CSI No. 20.27) |
| 247 | Extraction of defective VT submersible pumps and motor with 60" x 90" column pipe and then lowering of the repaired pump and motor with pipe and testing the same including checking main cut-out fuse and operation of Tube well for 24 hours fo rits smooth working with all cost of materials,labour and T&P etc required for the proper completion of the work.(CSI No. 20.28) |
| 248 | Supply and mixing bleaching powder in over head tank as required or as directed by Engineer - in - charge.(CSI No. 20.29) |
| 249 | Servicing of Air Conditioner (For Window/Split) by aurthorised service center complete in all respect including all labour and T&P. (CSI No. 20.30) |
| 250 | Servicing of Air Conditioner and filling of GAS(For Window/Split) by aurthorised service center complete in all respect including all labour and T&P.(CSI No. 20.31) |
| 251 | Supply and replacing of Angle Holder of "Anchor" or equivalentmake of approved quality including all materials, labour and T&Petc.(CSI No. 22.01) |
| 252 | Supply and replacing of 6 Amp. piano tyre switch of " Anchor" orequivalent make of approved quality including all materials,labour and T&P etc. (CSI No. 22.02) |
| 253 | Supply and replacing of 6 Amp. Piano tyre socket of "Anchor"equivalent make of approved quality including all materials,labour and T&P etc.(CSI No. 22.03) |
| 254 | Supply and replacing of 16 Amp.Piano type switch of "Anchor" orequivalent make of approved quality including all materials,labour and T&P etc.(CSI No. 22.04) |
| 255 | Supply and replacing of 16 Amp.Piano type socket of "Anchor" orequivalent make of approved quality including all materials,labour and T&P etc.(CSI No. 22.05) |
| 256 | Supply and laying 1.5Sq.mm gauge copper wire of "Plaza" orequivalent make of approved quality including connecting withexisting wiring in existingP.V.C.pipe. including allmaterials, labour and T&P complete.(CSI No. 22.06a) |
| 257 | Supply and laying 2.5Sq.mm gauge copper wire of "Plaza" orequivalent make of approved quality including connecting withexisting wiring in existingP.V.C.pipe. including allmaterials, labour and T&P complete.(CSI No. 22.06b) |
| 258 | Supply and laying 4.0Sq.mm gauge copper wire of "Plaza" orequivalent make of approved quality including connecting withexisting wiring in existingP.V.C.pipe. including allmaterials, labour and T&P complete.(CSI No. 22.06c) |
| 259 | Supply and laying 6.0Sq.mm gauge copper wire of "Plaza" orequivalent make of approved quality including connecting withexisting wiring in existingP.V.C.pipe. including allmaterials, labour and T&P complete.(CSI No. 22.06d) |
| 260 | Labour for fixing of electrical fittings such as switches / plug/ socket / holder / cut out / ceilingrose / wooden board etc.complete.(CSI No. 22.07) |
| 261 | Rewinding of burnt ceiling fan with approved copper wire including cost of all materials, labour and T&P etc. complete (Burnt wirewill not be taken back.)(CSI No.22.08) |
| 262 | Supply and replacing of burnt and damaged condenser of ceilingfan of approved quality including all materials,labour and T&Petc.(CSI No.22.09) |
| 263 | Taking off the defective ceiling fan from position & re hanging after receiving the repaired fan and proper connection etc.(CSI No.22.10) |
| 264 | Greasing of ceiling fan after cleaning the bearing and shaft withoil / petrol and its testing.(CSI No.22.11) |
| 265 | (a) Cutting down trees (exceeding 30 cm. grith)grubbing uproots,filling pits and levelling off ground,lopping branchestrimming removing (not exceeding 50 metres) and stackingserviceable materials and cleaning side.(CSI No. 22.12) |
| 266 | (b) Girth exceeding 100 cm and not exceeding 100 cm. |
| 267 | (c) Girth exceeding 150 cm and not exceeding 150 cm. |
| 268 | (d) Girth exceeding 200 cm and not exceeding200 cm. |
| 269 | (e) Girth exceeding 250 cm. and not exceeding 250 cm. |
| 270 | Removal of old and damaged sunfilm from the glass panes of doorand window shutters,including removal of Glue completely andcarefully by scraping or by any means including cost of allmaterials, labour T&P etc. required for proper completion of thework.(CSI No. 22.13) |
| 271 | Providing and fixing sun-film of Gareware or equivalent make onglass panes of door and window shutters including cost of allmaterials,labour and T&P etc. required for proper completion ofthe work.(CSI No. 22.14) |
| 272 | Providing broken glass (@ 19.50Kg / Sqm.) in 4 cm thick cementmortar to provide top surface circular & 2.5 cm. minimumthickness of grouting of glass pieces consisting one part ofcement and three parts of approved coarse sand (cost of 4 cm.thickness ) etc.(CSI No. 22.15) |
| 273 | Supplying stacks & filling zero grit in the base and the sides ofthe foundation to the required thickness, width & lengthincluding cost of all materials, labour and T&P etc all requiredfor proper completion of the work.(CSI No. 22.16) |
| 274 | Supplying and providing II class bricks shuttering of 115 mmthick for laying zero grit including cost of bricks,labour, T&Petc.required for proper completion of the work.(CSI No. 22.17) |
| 275 | Attending to petty maintenance service like plumbingservice,welder service, mansion service and carpenter servicerequired as below. Job attending by one no. Plumber/welder/mason/carpenter with oneno. helper per hour or part of an hour.(CSI No. 22.18) |
| 276 | Supply and sprinkling of lime in all drains of colony and waterlogged area including cost of all labour,materials,and T&P etc,as required for proper completion of the work.(CSI No. 22.19) |
| 277 | Cleaning and sweeping of roof of residence as and when requiredincluding uprooting of rank vegetation and disposal of thegarbage upto 50 M.(22.20) |
| 278 | Cleaning of toilets of non-residential buildings including costof detergent powder,horpic phenyl and suitable acid etc. asrequired for proper completion of the work.(CSI No. 22.22) |
| 279 | Supply and stacking of compost manure at site including carriageupto 3 km ( Manure measured in stacks will be reduced by 8% forpayment).(CSI No. 23.04) |
| 280 | Supply and stacking of local sand at site including charges ofroyalty and carriage of the same at site including all leadsafter 8 kms. (CSI No. 23.05) |
| 281 | Supply and plantation of approved 2 years old plants duly plantedin earthen Gamla of approximate size 300x 300 mm nominal size,filled with compost manure and sand mixed in approved proportionincluding cost of approved quality earthen gamla, compost manure, sand all other materials, labour and T&P etc reqd. for proper completion of work. (CSI No. 23.08) |
| 282 | Supply and plantation of approved 2 years old plants duly plantedinmosaic gamla of approximate size 300x 300 mm nominal size,filled with compost manure and sand mixed in approved proportionincluding cost of approved quality earthen gamla, compost manure, sand all other materials, labour and T&P etc reqd. for proper completion of work. mosaic gamla. (CSI No. 23.09) |
| 283 | Supply and planting seasonal flower plants such as Genda, Rose, Ostar, Flox, Guldawadi,Gulmehndi, Cochia etc. including digging hole of proper size, manure and treatment with proper chemical etc., including cost of fertilizer, manure, all materials, labour and T&P etc complete in allrespects. (CSI No. 23.10) |
| 284 | Supply and planting permanent ornamental plant like Croten, Varil pristal, Glodulus, Lily, Fern, Bogenbelia etc. including cost of plants, manure, pesticides, fertilizer, labour and T&P etc complete also including preparation of flower bed. (CSI No. 23.11) |
| 285 | Supply and plantingAshoka, Pendula, Mango, Neem,Peepal,Sheesham etc in pits including cost of all materials, labour and T&p etc complete in all respects.(CSI No. 23.12) |
| 286 | Supply and planting Desi Doob grass in lawn including cost of Doob, fertilizer, manure,labour, T&P and preparation of bed complete in all respects.(CSI No. 23.13) |
| 287 | Supply and planting of Garden Grass (Australian). including cost of plants, manure, pesticides,fertilizer, labour and T&P etc complete also including preparation of bed.(CSI No. 23.14) |
| 288 | Providing and fixing 15 mm dia B-class Jindal,JTC, ISI marked G.I. pipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete. (CSI No. 26.01a) |
| 289 | Providing and fixing 20 mm dia B-class Jindal,JTC, ISI marked G.I. pipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete. (CSI No. 26.01b) |
| 290 | Providing and fixing 25 mm dia B-class Jindal,JTC, ISI marked G.I. pipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete. (CSI No. 26.01c) |
| 291 | Providing and fixing 32 mm dia B-class Jindal,JTC, ISI marked G.I. pipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete. (CSI No. 26.01d) |
| 292 | Providing and fixing 40 mm dia B-class Jindal,JTC, ISI marked G.I. pipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete. (CSI No. 26.01e) |
| 293 | Providing and fixing 50 mm dia B-class Jindal,JTC, ISI marked G.I. pipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete. (CSI No. 26.01f) |
| 294 | Providing and fixing 65 mm dia B-class Jindal,JTC, ISI marked G.I. pipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete. (CSI No. 26.01g) |
| 295 | Providing and fixing 80 mm dia B-class Jindal,JTC, ISI marked G.I. pipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete. (CSI No. 26.01h) |
| 296 | Providing and fixing 100 mm dia B-class Jindal,JTC, ISI marked G.I. pipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete. (CSI No. 26.01i) |
| 297 | Providing and fixing 15 mm dia Jindal, JTC, ISI marked G.I. pipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes external GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete. (CSI No. 26.02a) |
| 298 | Providing and fixing 20 mm dia Jindal, JTC, ISI marked G.I. pipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes external GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete. (CSI No. 26.02b) |
| 299 | Providing and fixing 25 mm dia Jindal, JTC, ISI marked G.I. pipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes external GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete. (CSI No. 26.02c) |
| 300 | Providing and fixing 32 mm dia Jindal, JTC, ISI marked G.I. pipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes external GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete. (CSI No. 26.02d) |
| 301 | Providing and fixing 40 mm dia Jindal, JTC, ISI marked G.I. pipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes external GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete. (CSI No. 26.02e) |
| 302 | Providing and fixing 50 mm dia Jindal, JTC, ISI marked G.I. pipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes external GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete. (CSI No. 26.02f) |
| 303 | Providing and fixing 65 mm dia Jindal, JTC, ISI marked G.I. pipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes external GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete. (CSI No. 26.02g) |
| 304 | Providing and fixing 80 mm dia Jindal, JTC, ISI marked G.I. pipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes external GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete. (CSI No. 26.02h) |
| 305 | Providing and fixing 100 mm dia Jindal, JTC, ISI marked G.I. pipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes external GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete. (CSI No. 26.02i) |
| 306 | Making water connection of GI pipe line with GI Mains ( 25 mm to 100 mm ) dia. by providing and fixing Ferrule (25 mm dia) GI union and nipple including cutting and threading the pipe, inspection, testing, cutting and making good the road, executing bond with Nagar maha palika, fixing of pipe line upto the points near the building complete work including supply of all materials, labour and T&P etc. required for proper completion of work. (CSI No. 26.03) |
| 307 | Providing & fixing half turn 15mm dia gate valve, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.05a) |
| 308 | Providing & fixing half turn 20mm dia gate valve, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.05b) |
| 309 | Providing & fixing half turn 25mm dia gate valve, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.05c) |
| 310 | Providing & fixing half turn 32mm dia gate valve, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.05d) |
| 311 | Providing & fixing half turn 40mm dia gate valve, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work.. (CSI No. 26.05e) |
| 312 | Providing & fixing half turn 50mm dia gate valve, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.05f) |
| 313 | Providing & fixing half turn 65mm dia gate valve, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work.(CSI No. 26.05g) |
| 314 | Providing & fixing half turn 80mm dia gate valve, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.05h) |
| 315 | Providing & fixing half turn 100mm dia gate valve, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.05i) |
| 316 | Providing and fixing PVC BALL FLOAT VALVE 15 mm dia. WITH BRASS & UNION COMPLETE, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.06a) |
| 317 | Providing & fixing BRASS FERRULE, 15 mm dia ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.08a) |
| 318 | Providing & fixing BRASS FERRULE, 20 mm dia ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work..(CSI No. 26.08b) |
| 319 | Providing & fixing BRASS FERRULE, 25 mm dia ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work..(CSI No. 26.08c) |
| 320 | Providing and fixing PVC CONNECTION PIPE, 300X15 with 2 brass units ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work.(CSI No. 26.09a) |
| 321 | Providing and fixing PVC CONNECTION PIPE 450X15 mm WITH 2 BRASS UNITSISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.09b) |
| 322 | P/F GI UNIONS NOMINAL BORE 15 mm, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.10a) |
| 323 | P/F GI UNIONS NOMINAL BORE 20 mm, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work,(CSI No. 26.10b) |
| 324 | P/F GI UNIONS NOMINAL BORE 25 mm, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work,(CSI No. 26.10c) |
| 325 | P/F GI UNIONS NOMINAL BORE 32 mm, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work(CSI No. 26.10d) |
| 326 | P/F GI UNIONS NOMINAL BORE 40 mm, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work(CSI No. 26.10e) |
| 327 | P/F GI UNIONS NOMINAL BORE 50 mm, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work (CSI No. 26.10f) |
| 328 | P/F GI UNIONS NOMINAL BORE 65 mm, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work(CSI No. 26.10g) |
| 329 | P/F GI UNIONS NOMINAL BORE 80 mm, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work(CSI No. 26.10h) |
| 330 | P/F GI UNIONS NOMINAL BORE 100 mm, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work (CSI No. 26.10i) |
| 331 | Providing and fixing SLUICE VALVE, CI 80 mm dia. WITH Wheel. ISS:780 & ISS: 2906 class - I, "MEC" make, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.11a) |
| 332 | SLUICE VALVE CI 100 mm dia. WITH Wheel. ISS:780 & ISS: 2906 class - I, "MEC" make, ISI marked(CSI No. 26.11b) |
| 333 | Supply and fixing of Syntex or equivalent make water storage tank including all materials, labours, T&P etc required for proper completion of work.(CSI No. 26.12) |
| 334 | P/F BRASS BIB COCK, 15 mm dia (400 gsm) ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.13a) |
| 335 | P/F BRASS BIB COCK 15 mm dia. 200 gms( L & K and equi.)ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.13b) |
| 336 | Supply and fixing of 15 mm dia CI/ PVC bib cock including replacing of old bibcock complete.(CSI No. 26.13c) |
| 337 | P/F BRASS STOP COCK, 15 mm dia ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.14a) |
| 338 | Providing and fixing CP BRASS BIB COCK15 mm dia. HEAVY QUALITY ( 400gm) ( L & K and equi.) fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work.(CSI No. 26.16a) |
| 339 | P/F CP BRASS BIB COCK15 mm dia. HEAVY QUALITY ( 200gm) ( L & K and equi.)fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.16b) |
| 340 | P/F CP BRASSSTOP COCK 15 mm dia. HEAVY QUALITY ( 400gm) ( L & K and equi.)fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.16c) |
| 341 | P/F CP BRASS BIB COCK 15 mm dia. HEAVY QUALITY ( 200gm) ( L & K and equi.)fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work.(CSI No. 26.16d) |
| 342 | P/F CP BRASS SHOWER HEAVY QUALITY ( > 225 gms )fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.16e) |
| 343 | P/F CP BRASS wash basin mixer HEAVY QUALITY ( L & K and equi.)fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work.(CSI No. 26.16f) |
| 344 | P/F CP BRASS wall mixerHEAVY QUALITY( L & K and equi.)fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work.(CSI No. 26.16g) |
| 345 | P/F CP BRASS Angle Valve HEAVY QUALITY( L&K or equi. )fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.16i) |
| 346 | P/F CP BRASS Piller cock HEAVY QUALITY ( L&K or equi. )fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.16j) |
| 347 | P/F CONCEALED STOP COCK HEAVY QUALITY ( L&K or equi. )fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.16k) |
| 348 | Providing and fixing of 110 mm dia PVC pipe 6 Kg/ Sq.cm forwith special such as Tee, bend, socket, elbow etc including supply of all labour,material,T & P etc complete required for proper completion of work. (CSI No. 26.17) |
| 349 | Providing and fixing 15 mm dia ISI Approved CPVCpipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete. (CSI No. 26.19) |
| 350 | Providing and fixing 20 mm dia ISI Approved CPVCpipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete. (CSI No. 26.20) |
| 351 | Providing and fixing 25 mm dia ISI Approved CPVCpipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete. (CSI No. 26.21) |
| 352 | Providing and fixing 32 mm dia ISI Approved CPVCpipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete. (CSI No. 26.22) |
| 353 | Providing and fixing 40 mm dia ISI Approved CPVCpipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete. (CSI No. 26.23) |
| 354 | Providing and fixing of 200 mm dia PVC pipe of 6 Kg/sqcm with special such as Tee, bend, socket, elbow etc including supply of all labour,material,T & P etc complete required for proper completion of work. (CSI No. 26.24) |
| 355 | Providing and fixing of 150 mm dia PVC pipeof 6 Kg/sqcmwith special such as Tee, bend, socket, elbow etc including supply of all labour,material,T & P etc complete required for proper completion of work. (CSI No. 26.25) |
| 356 | Providing and fixing first quality white glazed "Orissa" pattern W.C.Pan Hindustan, Cera make. size 580 mm.(Hindustan,Cera Make) with out "P" trapincluding supply of all materials,labour and T&P etc.complete. (CSI No. 27.01) |
| 357 | Providing and fixing first quality white glazed European type W.C.Pan Hindustan, Cera make. size 580 mm.(Hindustan,Cera Make) with out "P" trapincluding supply of all materials,labour and T&P etc.complete. (CSI No. 27.02) |
| 358 | Providing and fixing PLASTIC SEAT COVERCOMPLETE WITH PLASTIC LID FOR EUROPEAN TYPE WC ISI MARKEDincluding supply of all materials,labour and T&P etc.complete. (CSI No. 27.04) |
| 359 | Providing and fixing flat back430X370X340 mm. size lipped front urinal basin of white glazed earthern ware first quality (Hindutan, Neycer make) I.S.I. marked including supply of all materials,labour and T&P etc. required for proper completion of the work.(CSI No. 27.06) |
| 360 | Providing and fixing DIVISION PLATE 600X300 mm WHITE GLAZED FOR URINALS I.S.I. marked including supply of all materials,labour and T&P etc. required for proper completion of the work. (CSI No. 27.07) |
| 361 | Providing and fixing 550X400 mm wash hand basin of white glazed earthern ware first quality I.S.I. marked (Hindustan,Neycer / Cera make) including supply of all materials, labour and T&P etc. required for proper completion of the work.(CSI No. 27.08) |
| 362 | Providing and fixing 10 litres low level PVC flushing cistern, COMPLETE WITH ALL FITTINGS including supply of all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 27.12) |
| 363 | Providing and fixing in position 32 mm. dia P.V.C. flush pipe. for W.C. with unions, bends etc. including supply of all materials,labour and T&P etc.required for proper completion of the work. (CSI No. 27.13) |
| 364 | Providing and fixing in position 32 mm. dia P.V.C.WASTE PIPE FOR WASH BASIN. including supply of all materials,labour and T&P etc.required for proper completion of the work. (CSI No. 27.14) |
| 365 | Providing and fixing 600 mm x 450 mm beveled edge mirror of Atul,Kiran makeglass with Indian polish 6.50 mm thick complete with back of 600 mm x 450 mm x 6 mm hard board sheet fixed to wooden cieats with C.P. brass screws and washers including supply of all materials, labour and T&P etc.required for proper completion of the work. (CSI No. 27.15) |
| 366 | Providing and fixing 750 mm x 20 mm size C.P. brass towel rail of approved qualityincluding bracketsincluding supply of all materials,labour and T&P etc. required for proper completion of the work and cutting and making good the wall plaster etc. required for work. (CSI No. 27.16) |
| 367 | Providing and fixing 450 mm x 20mm size C.P. brass towel rail of approved qualityincluding bracketsincluding supply of all materials,labour and T&P etc. required for proper completion of the work and cutting and making good the wall plaster etc. required for work .(CSI No. 27.18) |
| 368 | Providing and fixing soap dish chromium plated with brackets fixed to wooden cleats with brass screws including supply of all materials,labour and T&P etc.required for proper completion of the work. (CSI No. 27.19) |
| 369 | Supply and fixing CP Nahani Trap India make of heavy approved quality complete with CI grating,includingsupply of all materials,labour and T&P etc. required for proper completion of the work. (CSI No. 27.21a) |
| 370 | Supply and fixing 100 mm.PVCTrap India make of heavy approved quality complete with CI grating,includingsupply of all materials,labour and T&P etc. required for proper completion of the work. (CSI No. 27.21b) |
| 371 | Removal of cinder from W.C. and bath and its disposal within 50 metres lead including cost of all labour and T&P etc. required for proper completion of the work. (CSI No. 27.22) |
| 372 | Providing and fixing 100 mm dia white glazed "P" or "S" trap including cement concrete and all materials, labour cartage T&P etc.required for proper completion of the work.(For W.C.) (CSI No. 27.23) |
| 373 | Providing and fixing 100 mm dia PVC "P" or "S" trap including cement concrete and all materials, labour cartage T&P etc.required for proper completion of the work.(For W.C.) (CSI No. 27.24) |
| 374 | Providing and fixing CI GRATING 100 mm dia includingall materials, labour cartage T&P etc.required for proper completion of the work. (CSI No. 27.25) |
| 375 | Providing and fixing Stainless Steel sink 610x450x200 mm Heavy Quality( ISI MARKED ) includingall materials, labour cartage T&P etc.required for proper completion of the work. (CSI No. 27.26) |
| 376 | Providing and fixing CI COVER WITH FRAME COMPLETE 450 mm INTERNAL Dia.includingall materials, labour cartage T&P etc.required for proper completion of the work. (CSI No. 27.27) |
| 377 | Providing and fixing CI COVER WITH FRAME COMPLETE 300 mm INTERNAL Dia.includingall materials, labour cartage T&P etc.required for proper completion of the work. (CSI No. 27.28) |
| 378 | Providing and laying 110mm Dia SWR, PVC ( Finolex or equivalent ) pipe including cost of excavation, C.C etc including its jointing and connection, all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 27.29c) |
| 379 | Providing and fixing 110mm Dia SWR, PVC ( Finolex or equivalent ) Bends including cost of all materials, labour and T&P etcrequired for proper completion of the work.(CSI No. 27.30c) |
| 380 | Providing and fixing 110mm dia SWR, PVC ( Finolex or equivalent )Trap including cost of all materials, labour and T&P etcrequired for proper completion of the work. (CSI No. 27.31c) |
| 381 | Providing and fixing 110mm Dia SWR, PVC ( Finolex or equivalent ) Socket including cost of all materials, labour and T&P etcrequired for proper completion of the work. (CSI No. 27.32c) |
| 382 | Providing and fixing 110mm Dia SWR, PVC ( Finolex or equivalent )Coupler including cost of all materials, labour and T&P etcrequired for proper completion of the work. (CSI No. 27.33c) |
| 383 | Providing and fixing 110mm Dia SWR, PVC ( Finolex or equivalent ) plain Tee including cost of all materials, labour and T&P etc required for proper completion of the work. (CSI No. 27.34c) |
| 384 | Providing and fixing 110mm dia SWR, PVC ( Finolex or equivalent ) Door Tee including cost of all materials, labour and T&P etc required for proper completion of the work.(CSI No. 27.35c) |
| 385 | Providing and fixing110mm Dia SWR, PVC ( Finolex or equivalent ) Door “Y” including cost of all materials, labour and T&P etc required for proper completion of the work. (CSI No. 27.36c) |
| 386 | S/F full way CI Gate valve of 63 mm dia. With wheel , BSI mark heavy quality including supply of all labour , material andT & P for proper completion of work . (CSI No. 28.02) |
| 387 | S/F full way63/65 mm dia Fire hydrant Gun Metal Gate Valve heavy quality including supply of all labour , material andT & P for proper completion of work (CSI No. 28.03) |
| 388 | Placing of 10 KL PVCTank over slab of 6 m staging including supply of all labour , material andT & P for proper completion of work.(CSI No.28.08) |
| 389 | Applying two coat Tapcrete mixed with White Cement and water to proper consistany on leaky surface including supply of allmaterials, labour etc. required for proper completion of work. (CSI No. 28.16) |
| 390 | Applying two coat of Dr. Fixit pedigree URP with cement slurry of one parts of Dr. Fixit pedigree URP (covering) area of URP-2.00 to 2.25qm/Kg) and 1.5 parts of cement on Horizontal and vertical damp surface. Before application, clean the surface with wire brush or scrubber to remove hidden dirt, loose particles, laitance and dust, degrease the surface by using suitable solvent, thoroughly saturated the surface with potable water but at the time of application water should not be accumulated at any place as per direction E/I Including supply of all materials, labours and T&P etc, required for proper completion of work. |
| 391 | Providing and laying water proofing treatment at Roof &sunken portion of WCs, bathroom etc., by (A)1st layer- applying single coat ofBERGER Advanced Latex Plus mixed with water & cement in ratio 1:4:7 respectively and letting surface dry for 4-6 hours (B) 2nd layer- applying BERGER Home Shield PU Roofkoat compound, 50% diluted with water as primer coat (C) 3rd layer- applying single coats of BERGER Home Shield PU Roofkoat compound followed by laying of Geotextile Fleece with laping 50mm (D) 4th layer- applying two coat of BERGER Home Shield PU Roofkoat compound over geotextile. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with BERGER Home Shield PU Roofkoat.(After water Proofing contractor must submit 10 year warranty certificate from Berger paint india Limited for Each 100sqm Area) NSI-2 |
| 392 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work(CSI No. 28.19) |
| 393 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).(CSI No. 28.21) |
| 394 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (CSI No. 28.22) |
| 395 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.5 mm thickness.(CSI No. 28.23) |
| 396 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever requiredincluding cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)(CSI No. 28.24) |
| 397 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever requiredincluding cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Polyester Powder coated aluminium (minimum thickness of powder coating 50 micron)(CSI No. 28.25) |
| 398 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.(CSI No. 28.26) |
| 399 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. (CSI No. 28.27) |
| 400 | Providing and fixing false ceiling at all heights with integral densifiedr Armstrong false ceiling tiles of Size 595x595 x12 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as perBS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991, in true horizontal level suspended on interlocking metal powder coated T-Grid of hot dipped galvanised iron section of 0.40 mm thick on Silhouette profile,rotary stiched double webbed white with 6 SUB HEAD : 26- NEW TECHNOLOGIES AND MATERIALS 1632 mm reveal profilewhite/black),comprising of main-T runners of size 15x42 mm of length 3000 mm, cross - T of size 15x42 mm of length 1200 mm and secondary intermediate cross-T of size 15x42 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in- Charge. 26.23.1 With 12 mm thick Armstrong MiniralFobre Sound Absorbing Sheet (CSI No. 28.30) |
| 401 | Providing and fixingACP in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With ACPof 4.0 mm thickness.(CSI No. 28.31) |
| 402 | FixingACP( free of cost) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the directions of Engineer-in-charge.(CSI No.28.34) |
| 403 | Wiring point for light with 1.5 sq. mm FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe concealed in the wall, with 1.5 sq.mm.FRLSH PVC multistrained copper conductor cable as earthwire drawn inside the conduit,modular type switch and ceiling rose/angle/batten holder on 3mm thick phenolic laminated backelite sheet etc,complete in all respects,as directed,including matching colour wash.(PWD ELE. SCH.2018,131C+187A) |
| 404 | Wiring point for fan/fresh air fanwith 1.5 sq. mm FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe concealed in the wall, with 1.5 sq.mm.FRLSH PVC multistrained copper conductor cable as earthwire drawn inside the conduit,modular type switch and ceiling rose/angle/batten holder on 3mm thick phenolic laminated backelite sheet etc,complete in all respects,as directed,including matching colour wash (PWD ELE. SCH.2018,133C+187A) |
| 405 | Wiring point for plug with 1.5 sq. mm FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe concealed in the wall, with 1.5 sq.mm.FRLSH PVC multistrained copper conductor cable as earthwire drawn inside the conduit,modular type switch and ceiling rose/angle/batten holder on 3mm thick phenolic laminated backelite sheet etc,complete in all respects,as directed,including matching colour wash. (PWD ELE. SCH.2018,134C+187C) |
| 406 | Wiring point for exhaust fan with 1.5 sq. mm FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe concealed in the wall, with 1.5 sq.mm.FRLSH PVC multistrained copper conductor cable as earthwire drawn inside the conduit,modular type switch and ceiling rose/angle/batten holder on 3mm thick phenolic laminated backelite sheet etc,complete in all respects,as directed,including matching colour was.(PWD ELE. SCH.2018,137C+187D) |
| 407 | Supply and fixing and concealing of 20 mm dia 2 mm thick PVC conduit pipe with ISI marked embossed and with PVC accessories confirming to IS 3419 for drawing wires duly sealed at joints original resin/adhesive to make the complete piping rigid, plastering with cement sand mortor finished to the level with matching colour wash including costof all materials, labour and T&P etc.required for propercompletion of the work.(PWD ELE. SCH.2018,148A) |
| 408 | Supply and fixing and concealing of 25 mm dia 2 mm thick PVC conduit pipe with ISI marked embossed and with PVC accessories confirming to IS 3419 for drawing wires duly sealed at joints original resin/adhesive to make the complete piping rigid, plastering with cement sand mortor finished to the level with matching colour wash including cost of all materials, labour and T&P etc.required for propercompletion of the work(PWD ELE. SCH.2018,148A) but for 25 mm dia 2 mm thick PVC conduit(PWD ELE. SCH.2018,149A) |
| 409 | Supply and fixing of 2/3/4 ways round steel junction box confirming to ISS for 20mm dia 16 guage (1.5mm) thickconduit concealed in wall, keeping its level upto plaster duly provided with proper size cover screwed as directed at site by Engineer-in-charge with supply of all material, labour & T&P etc. required for proper completion of work.(PWD ELE. SCH.2018,154) |
| 410 | Supply and fixing of 2/3/4 ways round steel junction box confirming to ISS for 25mm dia 16 guage (1.5mm) thick rigid steelconduit concealed in wall, keeping its level upto plaster duly provided with proper size cover screwed as directed at site by Engineer-in-charge with supply of all material, labour & T&P etc. required for proper completion of work. (PWD ELE. SCH.2018,155) |
| 411 | Supply and fixing of 32 Amp.240 V DP metal clad rewireable type switch fuse unit on MDFEG/Teak wood board including making connections etc.complete all respect.(PWD ELE. SCH.2018,305 CAT-B) |
| 412 | Supply and fixing of 63 Amp.415 Vmetal clad T.P rewireable type switch fuse unit on angle iron bracket including making connections etc.complete all respect.(PWD ELE. SCH.2018,313 CAT-B) |
| 413 | Supply and burying of 600 x 600 x 3 mm copper plate vertically for earthing with its top at least 3 mtr. below ground level complete with 20 mm dia G.I. Pipe and funnel for watering and one earthing lead of one no. 8 to 10 S.W.G. copper wire in 15 mm dia G.I. pipe upto switch board (from apron to switch board the cost of G.I. Pipe and copper wire will be extra) 30 cm sq. C.I. frame with hinged cover masonary housing alternate layer of charcoal /coke & salt at least 150 mm thick alround etc.complete in all respects.(PWD ELE. SCH.2018,704) |
| 414 | S/F of one number 8 SWG G.I. wire in 15mm dia G.I.pipe for earthing,laid in ground or in wall duly concealed including the cost of cement,sand,labour,T&P and other materials, labour and T&P etc.required for propercompletion of the work.(PWD ELE. SCH.2018,721) |
| 415 | Supply and fixing of 0.5 to 5.0 Amp. SP MCB (10 KA ) C Curve of approved make including making connections etc.complete all respect. (PWD ELE. SCH.2018,1001 CAT -B) |
| 416 | S/F of 6/10/16/20/25/32 Amp. SP MCB (10 KA ) C Curveof approved make and as per sample approved by E/I (PWD ELE. SCH.2018,1002 CAT-B) |
| 417 | Supply and fixing of 40 Amp. SP MCB(10 KA ) C Curve of approved make including making connections etc.complete all respect.(PWD ELE. SCH.2018,1003A CAT-B) |
| 418 | S/F surface/flush mounting 4 ways SPN distribution board without MCB with additional metal door complete in all respect as per direction of E/I.(PWD ELE. SCH.2018,1022 CAT-B) |
| 419 | S/F surface/flush mounting 4 ways TPN distribution boardwith additional metal door without MCB complete in all respect as per direction of E/I. (PWD ELE. SCH.2018,1026 A CAT-B) |
| 420 | Supply and fixing of power plug with 20 amp/250 volt flush type modular switch and 5pin 20A/250V flush type universal modular socket switch on concealed M.S.Boxincluding suplly of all materials ,labour T&P etc. required for proper completion of work (PWD Elec.Sch.2018 Item No.1139 A) |
| 421 | S/F hexagonal/round G.P. fan box of approved make made up of 1.0 mm thick ISI marked G.P. sheet spot welded four to eight holes of 25.4 mm for pipe entry of the box.Holes should be semi-shuttered type with 0.5 mm G.P. sheet made upper & lower cover duly screwed fittedwith300 mm round zink coated M.S. bar X 12 MM & brand name should be embossed. Fixing with wiring conduit laid in RCC roof before concreting alongwith supply of all materials labour and T&P etc. required for proper completion of work.(PWD ELE. SCH.2018,1149) |
| 422 | Supply and Fixing of G.P. Modular switch box for 1/2 Module of approved make made up of 1.0 mm thick ISI Marked G.P. sheet including adjustable Nakka and holes plugged with PVC nylon caps.Two or more holes for pipe entry of 25.4 mm on upper and lower sides of the box.Holes should be semi-shutterd type and fitted with heavy brass earth pillar duly srewed and brand name should be embossed.Box flushed in wall including cutting of brick work ,fixing it to the level with cement sand mortar including matching colour wash including supplyof all materials, labour and T&P etc.required for propercompletion of the work.(PWD ELE. SCH.2018,1152A) |
| 423 | Supply and Fixing of G.P. Modular switch box for 3 Module of approved make made up of 1.0 mm thick ISI Marked G.P. sheet including adjustable Nakka and holes plugged with PVC nylon caps.Two or more holes for pipe entry of 25.4 mm on upper and lower sides of the box.Holes should be semi-shutterd type and fitted with heavy brass earth pillar duly srewed and brand name should be embossed.Box flushed in wall including cutting of brick work ,fixing it to the level with cement sand mortar including matching colour wash including supplyof all materials, labour and T&P etc.required for propercompletion of the work.(PWD ELE. SCH.2018,1152B) |
| 424 | Supply and Fixing of G.P. Modular switch box for 4 Module of approved make made up of 1.0 mm thick ISI Marked G.P. sheet including adjustable Nakka and holes plugged with PVC nylon caps.Two or more holes for pipe entry of 25.4 mm on upper and lower sides of the box.Holes should be semi-shutterd type and fitted with heavy brass earth pillar duly srewed and brand name should be embossed.Box flushed in wall including cutting of brick work ,fixing it to the level with cement sand mortar including matching colour wash including supplyof all materials, labour and T&P etc.required for propercompletion of the work.(PWD ELE. SCH.2018,1152C) |
| 425 | Supply and Fixing of G.P. Modular switch box for 6 Module of approved make made up of 1.0 mm thick ISI Marked G.P. sheet including adjustable Nakka and holes plugged with PVC nylon caps.Two or more holes for pipe entry of 25.4 mm on upper and lower sides of the box.Holes should be semi-shutterd type and fitted with heavy brass earth pillar duly srewed and brand name should be embossed.Box flushed in wall including cutting of brick work ,fixing it to the level with cement sand mortar including matching colour wash including supplyof all materials, labour and T&P etc.required for propercompletion of the work.(PWD ELE. SCH.2018,1152D) |
| 426 | Arranging JCV machine as per direction of Engineer - in - charge. Including all labour,fuel and T&P etc. required for proper completion of the work. (Material item no ch 2,21h+10%CP) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
