Military Engineer Services-MES has published Tender For Provision Of Out Opening Metallic Door At Armoury And Iron Grills In Various Building At Af Stn Thoise Under Ge (Af) Thoise. Submission Date for this Tender is 18-06-2024. Construction Material Tenders in Thoise Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 11-Jun-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 18-06-2024 |
| FileName | File Description | File Size |
| apdx.pdf | Tender Document | 0 KB |
| c04fb6b3-dc25-42f8-ab3e-f57a6ea01668.html | Tender Notice | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| BOQ_732870.xls | Tender Document | 0 KB |
| tender.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Taking down complete rolling shutter exc 10 sqm but n exc 15 sqmcomplete all as specified and as directed by Engineer-in-Charge. |
| 2 | Taking down chowkats or frames exc 1.5 sqm but n exc 4 sq.mwith shutter (without taking off shutters from the frame) all as specified and directed. |
| 3 | Taking down chowkats or frames n exc 1.5 sqm with shutter (without taking off shutters from the frame) all as specified and directed. |
| 4 | Taking down shutters of any description exc. 1 sqm and n. exc. 2 sqm each and removing from site all as specified and directed. |
| 5 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically providedand removing from site all as specified and directed. |
| 6 | Excavating in trenches in hard dense soil n.exc 1.5M wide and n.exc 1.5M in depth for foundation, laying pipes, cables etc n.exc 10Sqm on plan and n.exc 1.5M in depth and getting out in hard dense soil concrete all as specified and directed. |
| 7 | M&L for cement concrete type D2 1:4:8 (40mm graded aggregate) in foundation, filling and mass concrete all as specified and directed. |
| 8 | Form work to flat surfacesides of concrete foundations, footings, bases of columns, sides and soffits of foundation and plinth beams and similar work vertical or batter all as specified and directed. |
| 9 | Form work to flat surface sides of pillars, posts and columns all as specified and directed. |
| 10 | Formwork to flat surface sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc all as specified and directed. |
| 11 | M&L for steel reinf TMT bars 10 mm dia and over cut to length and bent to shape required including cranking, bending spirally for hoping for columns, hooking end and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed. |
| 12 | .-ditto- but 5mm dia and over upto and including 10mm dia as in stirrups spacer and binders complete all as specified and directed. |
| 13 | M&L for steel reinf roundbars 10 mm dia and over cut to length and bent to shape required including cranking, bending spirally for hoping for grill door, hooking end not less than 0.9mm dia or securing with welding Fe-410 W (Gde-250) quality -A all as specified and directed. |
| 14 | M&L Synthetic two coats enamel paint on new steel Surfaces of any description n exc 10cm width or girth over a coat of red oxide primer including preparation of surfaces when unconnected with other painting or when painted in different tint complete all as specified. |
| 15 | S&F Framed work as in doors or gates of angle, tube and other section with gusset plates, rails races, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete to similar work conferming to Fe 290 Gde 165 complete all as specified. |
| 16 | S&F Plates (plain or chequered) channels, square cut or notched as in gate and welded complete conferming to Fe 290 Gde 165 complete all as specified. |
| 17 | S&F Bands, supports or stays for hook (stay) heavy, large gate, hook and pintel hinges, hand made sliding bolt, clamps, hold fasts etc complete all as specified |
| 18 | S&F 1.60 mm thick MS plain black sheet in steel gate and similar work, cut to size, holes punched, including riviting, welded seam and bending etc complete. |
| 19 | S&F 75 mm dia CI wheel with ball bearing completed all as specified. |
| 20 | M&L for RCC Nominal mix type B-1 1:2:4 (20 mm graded crushed stone agg) as in foundation, indl raft, footing foundation beams, plinthbeams bases for columns, etc basement slab, under ramed piles and mass concrete all as specified and directed. |
| 21 | M&L for RCC Nominal mix type B-1 1:2:4 (20 mm graded crushed stone agg) as in Columns, pillars, piers, posts all as specified and directed. |
| 22 | M&L for RCC Nominal mix type B-1 1:2:4 (20 mm graded crushed stone agg) as Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelvesall as specified and directed. |
| 23 | M&L for PCC type B1 1:2:4 (20 mm graded stone agg) as in coping, kneelers, apex stone, bed plate etc all as specified. |
| 24 | Taking down cement plaster hacking for key, raking out joints of old brick work , pcc block masonary built in cement mortar and scrubbing down with water etc. to receive plaster. |
| 25 | M&L for rendering 15 mm thick in CM 1:4 usingon other than fair faces of brick work or concrete surfaces and finish the surface even and smooth without using extra cementall as specified and as directed. |
| 26 | M & L for rendering 10mm thickin CM (1:6) on brick masonry/ precast cement concrete block masonry internal surfaces of wallsfinished even and smooth without using extra cement completeall asspecified and directed by Engr in Charge. |
| 27 | M&L for Pre-cast cement concrete block masonry with solid blocks, Type C1 1:3:6 (using 20 mm graded aggregate) exc. 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed. |
| 28 | M & L three coats of white wash on new plastered surfaces on wall including preparation of new plastered surfaces all as specified and as directed . |
| 29 | M&L two coats of Cement Base Paint over a coat of alkali resistant primer on newly plastered surfaces of walls(camouflage pattern) including preperation of new surfaces all as specified and as directed. |
| 30 | M & L Synthetic enamel paint two coats on new steel surface any description over 10cm width or girth over a coat of red oxide primer including preparation of surfaces complete all as specified and directed by Engr in charge |
| 31 | supplied and fixed Pressed steel frames for doors (125x60mm) with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified. |
| 32 | supplied and fixed Pressed steel frames for doors (105x60mm) with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified. |
| 33 | M&L for 35mm 2nd class hardwood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed |
| 34 | M&L for preparation of new untreated surface and applying two coats of synthetic enamel paint over a coat of pink primer on wood surface complete all as specified and directed. |
| 35 | S&F 150mm long aluminium handles, cast type, anodised complete all as specified and directed completeall asspecified and directed by Engr in Charge. |
| 36 | S&F 200mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed |
| 37 | S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed |
| 38 | S&F Door closer hydraulicallyregulated,designation No. 3,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg cast iron and fixed complete all as specified and directed |
| 39 | Returning, filling including spreading, watering and well ramming in layers n.exc 25 CM in foft/loose and hard/dense soil |
| 40 | Removing excavated materialto a distance exc 250 mtr but not exc 500 mtr depositing where directed all as specified and as directed. |
| 41 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqmbut not exceeding 0.18 sqmin floorsetc setin neat cement slurry and pointed in coloured cement. overscreed bed or bedding layers of mortars 15 mm thick in CM 1:4 for layingfloor finishes incl roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc all as spd and directed |
| 42 | M&L Machine cut kota stone in flooring/trades of steps 18-20 mm thick over and incl 20 mm thick cement screed base in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the floor including rubbing, polishing and roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc all as spd and directedcomplete and moulding at edge if reqd all as spd & directed. |
| 43 | M&L 18-20 mm thick Kota stone tiles in riser of steps, skirting,dado etc, set and jointed in neat cement slurry and pointed in coloured cement to match tiles including rubbing, polishing, rounding the edges of kota stone over and including10mm thick backing coat in cement mortar (1:4), surfaces finished even and rough to receive tiles, including raking out joints, hacking for key, scrubbing down with water etc all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
