Bids Are Invited For Mhv Spares For Dry Ash Handling System Mhv Spares-100239094 VENT VALVE,OEM / PARTS PART NAME :PIPE PLUG DRAWING & POSITION NUMBER :NTPC/AHP/MHV/300X150 & 2 MATERIAL :CAST IRON EQUIPMENT NAME :MATERIAL HANDLING VALVE VALVE SIZE:300X150 MM 4 HD BAR, ITEM NO-2 & MATERIAL SPEC:AS PER IS 210 GR FG260 THE FOLLOWING CONDITIONS WILL BE APPLICABLE: - 1. VENDOR MAY VISIT SITE FOR DRAWING DEVELOPMENT AND GET IT APPROVED BY THE INDENTOR BEFORE SUPPLY. DRAWINGS SO ATTACHED ARE FOR REFERENCE ONLY. 2. VENDOR HAS TO SUPPLY ATLEAST ONE SAMPLE EACH AT SITE IN ADVANCE FOR FITMENT CHECKING BEFORE GOING FOR BULK PRODUCTION & ACTUAL DISPATCH OF ENTIRE LOT OF THE PO. 3. PARTY TO SUBMIT GC AND INTERCHANGEABILITY CERTIFICATES ALONG WITH THE SUPPLY. 4. EACH AND EVERY COMPONENT OF THE VALVES MUST BE INTERCHANGEABLE WITH THE EXISTING VALVES INSTALLED AT SITE, VENT VALVE,OEM / PARTS PART NAME :END COVER DRAWING & POSITION NUMBER :NTPC/AHP/MHV/300X150 & 3 MATERIAL :MILD STEEL EQUIPMENT NAME :MATERIAL HANDLING VALVE VALVE SIZE:300X150 MM MATERIAL SPEC:AS PER IS 2062 GR-A, THICKNESS 10MM THE FOLLOWING CONDITIONS WILL BE APPLICABLE: - 1. VENDOR MAY VISIT SITE FOR DRAWING DEVELOPMENT AND GET IT APPROVED BY THE INDENTOR BEFORE SUPPLY. DRAWINGS SO ATTACHED ARE FOR REFERENCE ONLY. 2. VENDOR HAS TO SUPPLY ATLEAST ONE SAMPLE EACH AT SITE IN ADVANCE FOR FITMENT CHECKING BEFORE GOING FOR BULK PRODUCTION & ACTUAL DISPATCH OF ENTIRE LOT OF THE PO. 3. PARTY TO SUBMIT GC AND INTERCHANGEABILITY CERTIFICATES ALONG WITH THE SUPPLY. 4. EACH AND EVERY COMPONENT OF THE VALVES MUST BE INTERCHANGEABLE WITH THE EXISTING VALVES INSTALLED AT SITE., VENT VALVE,OEM / PARTS PART NAME :AIR INTAKE CHECK VLV DRAWING & POSITION NUMBER :NTPC/AHP/MHV/300X150 & 7 MATERIAL :CAST IRON EQUIPMENT NAME :MATERIAL HANDLING VALVE VALVE SIZE:2 INCH MATERIAL SPECFOR BODY:AS PER IS 210 GR FG260, SPRING MOC :SPRING STEEL DISC MOC :ALUMINIUM ALTERNATE DRAWING NUMBER:060-AHD-02-14092022 & SSTPP/MM/AH/0036 THE FOLLOWING CONDITIONS WILL BE APPLICABLE: - 1. VENDOR MAY VISIT SITE FOR DRAWING DEVELOPMENT AND GET IT APPROVED BY THE INDENTOR BEFORE SUPPLY. DRAWINGS SO ATTACHED ARE FOR REFERENCE ONLY. 2. VENDOR HAS TO SUPPLY ATLEAST ONE SAMPLE EACH AT SITE IN ADVANCE FOR FITMENT CHECKING BEFORE GOING FOR BULK PRODUCTION & ACTUAL DISPATCH OF ENTIRE LOT OF THE PO. 3. PARTY TO SUBMIT GC AND INTERCHANGEABILITY CERTIFICATES ALONG WITH THE SUPPLY. 4. EACH AND EVERY COMPONENT OF THE VALVES MUST BE INTERCHANGEABLE WITH THE EXISTING VALVES INSTALLED AT SITE., VENT VALVE,OEM / PARTS PART NAME :GLAND PACKING HSG DRAWING & POSITION NUMBER :NTPC/AHP/MHV/300X150 & 11 MATERIAL :CAST IRON EQUIPMENT NAME :MATERIAL HANDLING VALVE VALVE SIZE:300X150MM MATERIAL SPEC:AS PER IS 210 GR FG260 THE FOLLOWING CONDITIONS WILL BE APPLICABLE: - 1. VENDOR MAY VISIT SITE FOR DRAWING DEVELOPMENT AND GET IT APPROVED BY THE INDENTOR BEFORE SUPPLY. DRAWINGS SO ATTACHED ARE FOR REFERENCE ONLY. 2. VENDOR HAS TO SUPPLY ATLEAST ONE SAMPLE EACH AT SITE IN ADVANCE FOR FITMENT CHECKING BEFORE GOING FOR BULK PRODUCTION & ACTUAL DISPATCH OF ENTIRE LOT OF THE PO. 3. PARTY TO SUBMIT GC AND INTERCHANGEABILITY CERTIFICATES ALONG WITH THE SUPPLY. 4. EACH AND EVERY COMPONENT OF THE VALVES MUST BE INTERCHANGEABLE WITH THE EXISTING VALVES INSTALLED AT SITE., VENT VALVE,OEM / PARTS PART NAME :SLIDE GATE DRAWING & POSITION NUMBER :NTPC/AHP/MHV/300X150 & 13 MATERIAL :SS410 EQUIPMENT NAME :MATERIAL HANDLING VALVE VALVE SIZE :300X150MM HARDNESS :325 BHN (MIN), 10MM THICK THE FOLLOWING CONDITIONS WILL BE APPLICABLE: - 1. VENDOR MAY VISIT SITE FOR DRAWING DEVELOPMENT AND GET IT APPROVED BY THE INDENTOR BEFORE SUPPLY. DRAWINGS SO ATTACHED ARE FOR REFERENCE ONLY. 2. VENDOR HAS TO SUPPLY ATLEAST ONE SAMPLE EACH AT SITE IN ADVANCE FOR FITMENT CHECKING BEFORE GOING FOR BULK PRODUCTION & ACTUAL DISPATCH OF ENTIRE LOT OF THE PO. 3. PARTY TO SUBMIT GC AND INTERCHANGEABILITY CERTIFICATES ALONG WITH THE SUPPLY. 4. EACH AND EVERY COMPONENT OF THE VALVES MUST BE INTERCHANGEABLE WITH THE EXISTING VALVES INSTALLED AT SITE., VENT VALVE,OEM / PARTS PART NAME : VALVE SEAT DRAWING & POSITION NUMBER : NTPC/AHP/MHV/300X150 & 14 MATERIAL : ALLOY CAST IRON EQUIPMENT NAME : MATERIAL HANDLING VALVE ADDITIONAL INFORMATION : VALVE SIZE: 300X150MM MATERIAL SPEC: NILCR AS PER IS-4771-1985, TYPE-1A, HARDNESS-500 BHN (MIN) THE FOLLOWING CONDITIONS WILL BE APPLICABLE: - 1. VENDOR MAY VISIT SITE FOR DRAWING DEVELOPMENT AND GET IT APPROVED BY THE INDENTOR BEFORE SUPPLY. DRAWINGS SO ATTACHED ARE FOR REFERENCE ONLY. 2. VENDOR HAS TO SUPPLY ATLEAST ONE SAMPLE EACH AT SITE IN ADVANCE FOR FITMENT CHECKING BEFORE GOING FOR BULK PRODUCTION & ACTUAL DISPATCH OF ENTIRE LOT OF THE PO. 3. PARTY TO SUBMIT GC AND INTERCHANGEABILITY CERTIFICATES ALONG WITH THE SUPPLY. 4. EACH AND EVERY COMPONENT OF THE VALVES MUST BE INTERCHANGEABLE WITH THE EXISTING VALVES INSTALLED AT SITE, VENT VALVE,OEM / PARTS PART NAME :VALVE OUTLET DRAWING & POSITION NUMBER :NTPC/AHP/MHV/300X150 & 15 MATERIAL :ALLOY CAST IRON EQUIPMENT NAME :MATERIAL HANDLING VALVE VALVE SIZE:300X150MM HARDNESS-250 BHN (MIN) THE FOLLOWING CONDITIONS WILL BE APPLICABLE: - 1. VENDOR MAY VISIT SITE FOR DRAWING DEVELOPMENT AND GET IT APPROVED BY THE INDENTOR BEFORE SUPPLY. DRAWINGS SO ATTACHED ARE FOR REFERENCE ONLY. 2. VENDOR HAS TO SUPPLY ATLEAST ONE SAMPLE EACH AT SITE IN ADVANCE FOR FITMENT CHECKING BEFORE GOING FOR BULK PRODUCTION & ACTUAL DISPATCH OF ENTIRE LOT OF THE PO. 3. PARTY TO SUBMIT GC AND INTERCHANGEABILITY CERTIFICATES ALONG WITH THE SUPPLY. 4. EACH AND EVERY COMPONENT OF THE VALVES MUST BE INTERCHANGEABLE WITH THE EXISTING VALVES INSTALLED AT SITE., VENT VALVE,OEM / PARTS PART NAME :GLAND PCKNG FOLLOWER DRAWING & POSITION NUMBER :NTPC/AHP/MHV/300X150 & 18 MATERIAL :CAST IRON EQUIPMENT NAME :MATERIAL HANDLING VALVE VALVE SIZE:300X150MM MATERIAL SPEC:AS PER IS 210 GR FG260 THE FOLLOWING CONDITIONS WILL BE APPLICABLE: - 1. VENDOR MAY VISIT SITE FOR DRAWING DEVELOPMENT AND GET IT APPROVED BY THE INDENTOR BEFORE SUPPLY. DRAWINGS SO ATTACHED ARE FOR REFERENCE ONLY. 2. VENDOR HAS TO SUPPLY ATLEAST ONE SAMPLE EACH AT SITE IN ADVANCE FOR FITMENT CHECKING BEFORE GOING FOR BULK PRODUCTION & ACTUAL DISPATCH OF ENTIRE LOT OF THE PO. 3. PARTY TO SUBMIT GC AND INTERCHANGEABILITY CERTIFICATES ALONG WITH THE SUPPLY. 4. EACH AND EVERY COMPONENT OF THE VALVES MUST BE INTERCHANGEABLE WITH THE EXISTING VALVES INSTALLED AT SITE., VENT VALVE,OEM / PARTS PART NAME :MATERIAL HANDLING VLV ASSY LH DRAWING & POSITION NUMBER :NTPC/AHP/MHV/300X150 VALVE SIZE:300X150MM, MOC VALVE BODY-ALLOY CAST IRON ,HARDNESS:250 BHN MIN, MOC SEAT :NILCR 30/500 AS PER IS:4771-1985 TYPE-1A HARDNESS-500 BHN MIN, MOC SLIDE GATE SS410, HARDNESS:325 BHN MIN, THICKNESS:10 MM MIN, MOC BODY OF AIR INLET CHECK VALVE:CAST IRON FG260, SPRING OF AIR INLET CHECK VALVE :SPRING STEEL, DISC OF AIR INLET CHECK VALVE :ALUMINUM THE FOLLOWING CONDITIONS WILL BE APPLICABLE: - 1. VENDOR MAY VISIT SITE FOR DRAWING DEVELOPMENT AND GET IT APPROVED BY THE INDENTOR BEFORE SUPPLY. DRAWINGS SO ATTACHED ARE FOR REFERENCE ONLY. 2. VENDOR HAS TO SUPPLY ATLEAST ONE SAMPLE EACH AT SITE IN ADVANCE FOR FITMENT CHECKING BEFORE GOING FOR BULK PRODUCTION & ACTUAL DISPATCH OF ENTIRE LOT OF THE PO. 3. PARTY TO SUBMIT GC AND INTERCHANGEABILITY CERTIFICATES ALONG WITH THE SUPPLY. 4. EACH AND EVERY COMPONENT OF THE VALVES MUST BE INTERCHANGEABLE WITH THE EXISTING VALVES INSTALLED AT SITE., VENT VALVE,OEM / PARTS PART NAME :MATERIAL HANDLING VLV ASSY RH DRAWING & POSITION NUMBER :NTPC/AHP/MHV/300X150 VALVE SIZE:300X150MM, MOC VALVE BODY-ALLOY CAST IRON ,HARDNESS:250 BHN MIN, MOC SEAT :NILCR 30/500 AS PER IS:4771-1985 TYPE-1A HARDNESS-500 BHN MIN, MOC SLIDE GATE SS410, HARDNESS:325 BHN MIN, THICKNESS:10 MM MIN, MOC BODY OF AIR INLET CHECK VALVE:CAST IRON FG260, SPRING OF AIR INLET CHECK VALVE :SPRING STEEL, DISC OF AIR INLET CHECK VALVE :ALUMINUM THE FOLLOWING CONDITIONS WILL BE APPLICABLE: - 1. VENDOR MAY VISIT SITE FOR DRAWING DEVELOPMENT AND GET IT APPROVED BY THE INDENTOR BEFORE SUPPLY. DRAWINGS SO ATTACHED ARE FOR REFERENCE ONLY. 2. VENDOR HAS TO SUPPLY ATLEAST ONE SAMPLE EACH AT SITE IN ADVANCE FOR FITMENT CHECKING BEFORE GOING FOR BULK PRODUCTION & ACTUAL DISPATCH OF ENTIRE LOT OF THE PO. 3. PARTY TO SUBMIT GC AND INTERCHANGEABILITY CERTIFICATES ALONG WITH THE SUPPLY. 4. EACH AND EVERY COMPONENT OF THE VALVES MUST BE INTERCHANGEABLE WITH THE EXISTING VALVES INSTALLED AT SITE., VENT VALVE,OEM / PARTS PART NAME :SLIDE GATE HOUSING,LH DRAWING & POSITION NUMBER :NTPC/AHP/MHV/300X150 & 1 MATERIAL :ALLOY CAST IRON EQUIPMENT NAME :MATERIAL HANDLING VALVE VALVE SIZE:300X150MM, HARDNESS:250 BHN (MIN) THE FOLLOWING CONDITIONS WILL BE APPLICABLE: - 1. VENDOR MAY VISIT SITE FOR DRAWING DEVELOPMENT AND GET IT APPROVED BY THE INDENTOR BEFORE SUPPLY. DRAWINGS SO ATTACHED ARE FOR REFERENCE ONLY. 2. VENDOR HAS TO SUPPLY ATLEAST ONE SAMPLE EACH AT SITE IN ADVANCE FOR FITMENT CHECKING BEFORE GOING FOR BULK PRODUCTION & ACTUAL DISPATCH OF ENTIRE LOT OF THE PO. 3. PARTY TO SUBMIT GC AND INTERCHANGEABILITY CERTIFICATES ALONG WITH THE SUPPLY. 4. EACH AND EVERY COMPONENT OF THE VALVES MUST BE INTERCHANGEABLE WITH THE EXISTING VALVES INSTALLED AT SITE., VENT VALVE,OEM / PARTS PART NAME :SPRING DRAWING & POSITION NUMBER :NTPC/AHP/MHV/300X150 MATERIAL :SS304 EQUIPMENT NAME :2 INCH AIR INLET CHECK VALVE OF MATERIAL HANDLING VALVE OF SIZE:300X150MM THE FOLLOWING CONDITIONS WILL BE APPLICABLE: - 1. VENDOR MAY VISIT SITE FOR DRAWING DEVELOPMENT AND GET IT APPROVED BY THE INDENTOR BEFORE SUPPLY. DRAWINGS SO ATTACHED ARE FOR REFERENCE ONLY. 2. VENDOR HAS TO SUPPLY ATLEAST ONE SAMPLE EACH AT SITE IN ADVANCE FOR FITMENT CHECKING BEFORE GOING FOR BULK PRODUCTION & ACTUAL DISPATCH OF ENTIRE LOT OF THE PO. 3. PARTY TO SUBMIT GC AND INTERCHANGEABILITY CERTIFICATES ALONG WITH THE SUPPLY. 4. EACH AND EVERY COMPONENT OF THE VALVES MUST BE INTERCHANGEABLE WITH THE EXISTING VALVES INSTALLED AT SITE., VENT VALVE,OEM / PARTS PART NAME :DISC DRAWING & POSITION NUMBER :NTPC/AHP/MHV/300X150 MATERIAL :ALUMINIUM EQUIPMENT NAME :2 INCH AIR INLET CHECK VALVE OF MATERIAL HANDLING VALVE OF SIZE:300X150MM THE FOLLOWING CONDITIONS WILL BE APPLICABLE: - 1. VENDOR MAY VISIT SITE FOR DRAWING DEVELOPMENT AND GET IT APPROVED BY THE INDENTOR BEFORE SUPPLY. DRAWINGS SO ATTACHED ARE FOR REFERENCE ONLY. 2. VENDOR HAS TO SUPPLY ATLEAST ONE SAMPLE EACH AT SITE IN ADVANCE FOR FITMENT CHECKING BEFORE GOING FOR BULK PRODUCTION & ACTUAL DISPATCH OF ENTIRE LOT OF THE PO. 3. PARTY TO SUBMIT GC AND INTERCHANGEABILITY CERTIFICATES ALONG WITH THE SUPPLY. 4. EACH AND EVERY COMPONENT OF THE VALVES MUST BE INTERCHANGEABLE WITH THE EXISTING VALVES INSTALLED AT SITE. Total Quantity : 1284
