Military Engineer Services-MES has published Tender For Repair And Maintenance Of Fencing, Footpath/ Hardstanding, Boundary Wall, Gate Pillar Etc In Lower And Upper Pump House In Raiwala Mil Stn. Submission Date for this Tender is 11-06-2024. Footpath Work Tenders in raiwala Uttarakhand. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| 8928TD.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| BOQ_732736.xls | Tender Document | 0 KB |
| d32db779-6fa2-4810-85a5-91bb4186fbd4.html | Tender Notice | 0 KB |
| Sl. No. | Item Description |
| 1 | Dismantlingposts or struts(wood, steel or RCC) any section including taking out embedded portion in natural ground and making good disturbed ground |
| 2 | Excavating post holes or similar holes, each not exceeding 0.5 Cu. M, getting out in Soft/ disintegrated soil, |
| 3 | Demolition ofunreinforced cement concrete of any description and in any position not otherwise specifically provided for including ,removing demilished material from the premises ofMoD land, complete all as specified and directed. |
| 4 | M & L for Plain Cement Concrete Type D2 1:4:8 (using 20 mm graded stone aggregate) in foundations, filling and mass concrete. |
| 5 | M & L for Removing excavated materialls and depositing at a distance n. exc 50 Mtr at a level n exc 1.5 m above the starting point all as directed. |
| 6 | Dismantling mild steel work of any description not otherwise provided for |
| 7 | S & F of mild steel work as in, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe – 290 Gde E -165 complete all as specified and directed. |
| 8 | --Ditto-- as per above item but except material but incl fabrication |
| 9 | Dismantlingfencing wire mesh any type |
| 10 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc., including provision of binding wire. |
| 11 | Supply only Chain link MS Galvanized fencing, any size or type |
| 12 | Mild steel round bars 10 mm dia., and over cut to length, bent to shape required, includingwith screwed ends, nuts, washers and mild steel plates for walls etc. king rods and straining bolts confomiing to Fe-290 Gde-E-165 |
| 13 | S&F in repair galvanised 2 strand, steel barbed wire 2.24mm dia, barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type ofstandard rails, straining bolts, including securing or tying at crossingwith and provision of galvanised mild steel wire staples or steel pins etcas directed. Note :- Each line of horizontal / vertical / diagonal wire to bemeasured for the purpose of payment. |
| 14 | M&L for removal of vegitation growth and bushes etc n.exc. 30cm girth including cutting of trunk portion, protruding over ground, digging out roots, filling holes and leveling off ground, stacking of serviceable material and removing of unserviceable material to a distance n exc. 50m and clearing the site complete all as specified and directed. |
| 15 | Dismantling structural steel work including doors, gatesany description complete all as specified. |
| 16 | SF for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete |
| 17 | M&L for preparation of new surfaces of steel of any description over 10cm in width or girth apply two coats of synthetic enamel paint over a coat of Red oxide primercomplete all as specified. |
| 18 | M&L preparation of old painted steel surfaces of any descripton over 10cm width or girth and applying one coat of synthetic enamel paint First quality all as specified and directed . |
| 19 | Demolition of brick work built in cement mortar in any description and position complete all as specified and directed. |
| 20 | Brick work with sub-class `B" bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 |
| 21 | Brick work with sub-class `B" bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6, except brick work |
| 22 | M & L for PCC 1:3:6 type B0 (using 12.5 mm graded stone aggrgate) as in coping. |
| 23 | M&L Rendering 15 mm thick on fair faces of brick work or concrete walls surfaces in CM 1:6 finished to even & smooth withoutusing extra cement. |
| 24 | Taking down cement plastering at any description on brick or stone wall etcincluding rakingout joints hacking for key scrubbing down with water etc and removal of debries and depositing where directed. |
| 25 | M&L for Rendering 15mm thick on stone masonary surfaces in CM 1:4 finishing even and smooth without using extra cement complete all as specified and directed. |
| 26 | M&L for preparation of surfaces of new plaster surface of wall and applying two coat of cement base paint complete all as specified and directed. |
| 27 | Demolitionreinforcedcement concrete of any descriptionand in any positionnot otherwise specially provided for ,inManhole covers, roof slab of soak well and septic tank etc,including removing demilished material from the premises ofMoD land, complete all as specified and directed. |
| 28 | M&L RCC 1:2:4 type B1 (using 20mm graded aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves etc. |
| 29 | Form work to soffits of suspended slabs such as roof slabs, floor slabs and similar worknot exce 200 mm thick,rough finished flat surface of concrete |
| 30 | M&L for mild steel TMT bars10mm dia, cut to length, bent to shape required including cranking bending spirally & binding with and in including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 31 | M&L precast cement concrete 1:2:4, type B1 (Using 20 mm graded stone aggregate) in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4 |
| 32 | Demolition of cement concrete (un-reinforced) in Ground floors and paving n.exe 15cm thickness ( below or above ground level ) including removal of rubbish out side complex (MOD land), complete all as specifiedand directed. |
| 33 | M & L for Plain Cement Concrete Type D2 1:4:8 (using 20 mm graded stone aggregate)in sub base of flooring/ hard standing /footpath |
| 34 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete. |
| 35 | Providing, cement concrete Type B1 1:2:4 (20 mm graded aggregate) in kerbs or mud stops, rounded or chamfered on edges |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
