Defence Statutory Bodies & Commissions/Committees Closing in 0 days TDR #43410096

Tender For Certain Repair Replacement To Roof Sheets False Ceiling Wall Plaster And Misc Works At Mes Instlns At Dalhousie And Bakloh Cantt

Issued by Statutory Bodies & Commissions/Committees · dalhousie, Himachal Pradesh
Tender Value
9 Lakhs
Estimated cost
Bid Submission
07 Jun 2024
0 days left
EMD
18000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
dalhousie → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available

Project Description

Certain Repair Replacement To Roof Sheets False Ceiling Wall Plaster And Misc Works At Mes Instlns At Dalhousie And Bakloh Cantt

BOQ

Name of Work: CERTAIN REPAIR/ REPLACEMENT TO ROOF SHEETS, FALSE CEILING,WALL PLASTER AND MISC WORKS AT MES INSTLNS AT DALHOUSIE AND BAKLOH CANTT.
Sl. No. Item Description
1Dismantling CGI or PGI sheet of any gauge and thickness or any pattern roof covering.
2M & L for 0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed withL- type or J- type or cranked hook bolts and washers, in roofs, walls etc. with grade of zinc coating 275.
3All as per item No 2above but except sheeting
4Galvanised plain mild steel sheeting of thickness 0.63mmgrade O with 120 gm/sqm Zinc coating with L or J type or cranked hooks and washers bitumen washer as in ridge etc
5All as per item No 4above but except sheeting
6Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
7Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified,
8Dismantling wall and ceiling boards any thickness including cover fillets.
94mm thick non asbestos fibre cement designer board ISI Marked fixed with screw to aluminiumframe workin ceiling flat or sloppy as per manufacturer instructions
10Ditto except non asbestos building boards
11S&F Anodised aluminium snap grid frame work for false ceiling for size of grid 605 x 605 mmincluding hangers 6 mm diaGI (up to 1200 mm long) adjusting level fixed to roof complete all as specified
12Dismantling framed timber scantling 40 Sq cm and over in section in any position
13S&F structural steel work as inroof trusses (framed), trussed, purlins, rafter,crane gantries, rails & fastenings & heavy brackets framing including distance pieces, cleats etc. confirming to Fe 410-W (E-250 grade quality A).
14S&F rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates including bending and welding.
15Dismantling wrought iron or mild steel work of any description not other wise provided.
16S& F mild steel flat iron 40x5 mm for wind tie confirming to Fe 410-0 or Fe 310-o
17Dismantling mild steel work of any description not otherwise provided for as in wind ties and fixing in same position
18Demolition of cement concrete (unreinforcement) of any discription and in any position not otherwise specificcally provided for
19PCC 1:2:4 type B-1 (using 20 mm gradedstone aggregate) as insurface channel drains all as specified and directed.
20M&L extra over forming fair finished drains or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds, mitred/ stopped ends etc
21Demolition of cement concrete in ground floor and paving n.exc 15 cm thick above or below ground level (unreinforced).
22M&L for cement concrete 1:3:6 type C-2 (40mm graded aggregate)75 mm thick surfacefinished even and fair all specified to receive top layer.
23M&L screed bed 15 mm thickin cm 1:6 for bedding layer to floor tiles
24M & L coloured chequered cement concrete tile (Vibrator made ) 200mm x 200mm x25mm thick, set, jointed and pointed in neat cement slurry in floor with grey cement and pigment complete all as specified.
25Demolition of stone/brick masonary built in cement/cement lime mortar.
26M&L walling of random rubble stone masonery brought up to course, well bonded,bedded and solidly hearted, built in CM 1:6.
27M&L walling of random rubble stone masonery brought up to course, well bonded,bedded and solidly hearted, built in CM 1:6.but Except stone.
28M&L for rendering 15mm thick cement plaster on concrete surfaces or fair surface face of brick work in CM 1:4 surface finished even and smooth without using extra cement complete all as specified.
29Preparation of newsteel surfaces and applying two coat of synthetic enamel paint over a coat of red oxide all as specified
30M & L for two coats white wash on wallson plastered surfaces as preparatory work on newly plastered surfaces.
31Preparation of old painted steel surfaces (such as CGI sheet, GI water tube, fencing post etc.) and applying one coat of syntheticenamel paint over 10cm width or girth, complete all as specified

AI Tender Summary

OUR REF NO 43410096
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 9 Lakhs
LAST DATE 07-06-2024
Authority
Authority Name Military Engineer Services
Work Description Certain Repair Replacement To Roof Sheets False Ceiling Wall Plaster And Misc Works At Mes Instlns At Dalhousie And Bakloh Cantt
Basic Detail
Tender No 9011/2024-25/E8
Bidding Type Tender
Location
City dalhousie
State Himachal Pradesh
Key Dates
Publish Date 17 May 2024
Submission Date 07 Jun 2024
Open Date 14 Jun 2024
Finance
Tender Value 9 Lakhs
Tender Fee 500
EMD 18000
Exemption Available
Document List
Tendernotice_1.pdf
9903d740-255f-409b-975b-99254f8cff76.html
BOQ_732594.xls
tenderandps092425.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

May 17, 2024
11:30 IST

Tender Published

Tender notice published.

Completed
Jun 07, 2024
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Jun 14, 2024

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
pdf

Tendernotice_1.pdf

html

9903d740-255f-409b-975b-99254f8cff76.html

xls

BOQ_732594.xls

pdf

tenderandps092425.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders