Military Engineer Services-MES has published Tender For Special Repair To Rcc Security Wall With Fencing Including Provision Of Toilet Block And Urinal Under Age Br Dett-Iii And Age Em Of Ge 862 Ews. Submission Date for this Tender is 07-06-2024. Wall construction Tenders in Rajouri Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| BOQ_732461.xls | Tender Document | 0 KB |
| TD-26.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| 83b01cf7-29ac-4d9e-834e-9feb744d4e6b.html | Tender Notice | 0 KB |
| Sl. No. | Item Description |
| 1 | Sch "A" Part-I(B/R Works) Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles complete all as specified and directed. |
| 2 | Excavation in trenches, n.exc 1.5m wide and n.exc 1.5m depth for foundation, shaft, manhole, pier holes, laying of cables/pipes etc and n. exc 10sqm on plan and getting out in any type soil complete all as specified and as directed. |
| 3 | Excavation in any type of soil by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m complete all as specified and as directed. |
| 4 | Returning, filling in, trenches including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick , complete all as specified and as directed. |
| 5 | Removing excavated material, not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point, complete all as specified and directed. |
| 6 | Removing excavated material, exceeding 5 Km but not exceeding 10 km and depositing, complete all as specified and directed. |
| 7 | M&L for plain cement concrete, type D-2 1:4:8 (using 40 mm graded crushed stone aggregates) as in foundation, filling and mass concrete, complete all as specified and directed. |
| 8 | M&L for reinforced cement concrete M-25 (Design mix-25) (20 mm graded stone aggregate) as in foundations, including rafts, footings,foundation beams, plinth beams, bases for columns and the like, complete all as specified and directed |
| 9 | M&L for reinforced cement concrete M-25 (Design mix-25) (20mm graded stone aggregates) as in columns, pillars, piers, post, struts and the like, complete all as specified and directed |
| 10 | M&L for reinforced cement concrete M-25 (Design mix-25) (20mm graded stone aggregate) asin beams, cantilivers, bressmmers, lintles over 1.5 m span, complete all as specified and directed |
| 11 | M&L for reinforced cement concrete M-25 (Design Mix)(20mm graded crushed stone aggregate) asSlabs supported on walls, beams and columns in floors, roofs, landings, balconies,canopies, deck slabs and in shelves and the like, complete all as specified and directed |
| 12 | M&L for brick work with sub class "B" bricks, old size, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:4, complete all as specified and directed. |
| 13 | M&L for rendering 15 mm thick in cement mortar 1:4 on other than fair faces of brick wall , finished the surface even and smooth without using extra cement, complete all as specified and directed. |
| 14 | M&L for preparation of new plastered surface of walls and applying two coat of exterior weather coat paint of apex ultima in two or more colours pattern over and inlcuding a coat of primer, complete all as specified and directed by Engr-in-Charge. |
| 15 | S&F for mild steel TMT bars 10mm dia and over as in reinforcement , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-W, grade E-250, complete all as specified and directed. |
| 16 | M&L for mild steel TMT bars 5mm to 8 mm diacut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends as in stirrups, spacers and binders including binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-W, grade E-250, complete all as specified and directed. |
| 17 | S&F for mild steel TMT bars 6 to 8mm dia as in reinforcement , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-W, grade E-250, complete all as specified and directed. |
| 18 | S&F for mild steel framed brackets of angles or tees with web and flanges cut to shape, drilled and counter sunk for screw, including bending and welding angles, as necessary, gusset plates, riveting etc not exceeding 10 Kg each brackets, conforming to Fe. 290. Gde-E-165 (brackets over 10 kg each to be measured under structural steel), including dismantling of old iron work, complete all as specified and directed. |
| 19 | S&F for galvanised, 2 strand, steel barbedwire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line of wire to be measured) after dismantling of old unserviceble barbed wire complete all as specified and directed. |
| 20 | S&F for concertina coil 1050 mm dia, 56 loops, 2.5mm core wire heavy galvanised (wire-275 GSM & strip-200 GSM), tensile strength of wire 1400-1500 N/Sqmm, weight 14.63 Kg / Coil, stretchable length 12M inlcuding securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc after dismantling of old concertina coil of any type complete all as specified and directed. |
| 21 | M&L formwork to sides of concrete foundation, footing, bases of colums, raft & raft beams, sides and soffits (if any) of foundation and plinth beam and similar work, in rough finished flat surface of concrete, complete all as specified and directed. |
| 22 | M&L formwork to side ofpillars, posts, struts, piers, columns and stanchions for rough finished surface of concrete, complete all as specified and directed. |
| 23 | M&L formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilivers, shelves, including sup-ports, overhangs etc also splays between floors and beam etc, complete all as specified and directed. |
| 24 | M&L formwork to soffits of suspended slabs such as roof slabs, landings and similar work; n exc 200mm thick (Horizontal and sloping) for rough finished surface of concrete, complete all as specified and directed. |
| 25 | M&L for preparation of new or previously untreated steel surfaces of any description, over 10cm in width or girth andapplying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 26 | M&L for 75mm thick plain cement concrete 1:4:8, type D-2 using 40mm graded crushed stone aggregates as in sub base of floor, complete all as specified and directed. |
| 27 | M&L for brick work with sub class "B" bricks, old size, straight or curved on plan exc 6 m mean radius,in half brick thick wall built in cement mortar 1:4, complete all as specified and directed. |
| 28 | M&L for rendering 10 mm thick in cement mortar 1:6 on fair faces of brick wall/concrete surfaces , finished the surface even and smooth without using extra cement, complete all as specified and directed. |
| 29 | M&L for 5mm thick plaster on ceiling surfaces in CM 1:3, complete all as specified and directed. |
| 30 | M&L for preparation of new plastered surfaces of walls and applying two coats of distemper oilemulsion over a coat of chalk whitening, complete all as specified and directed. |
| 31 | M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of cement primer, complete all as specified and directed. |
| 32 | M&L for preparation of new plastered surfaces of ceiling surfaces and applying three coats of white wash, complete all as specified and directed. |
| 33 | M&L for hardcore of gauge n.exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and remmed to a true surface under plinth protection, complete all as specified and directed. |
| 34 | M&L for 75mm thick plain cement concrete, type C-2, 1:3:6 (using 40mm graded crushed stone aggregate)as in plinth protection, laid in slope 1:12 from outer edge of the wall,finished even and fair, laid in alternate bays including providing 6mm wide joints throughtout thickness of plinth protection in concrete bays and in between walling and plinth protection, joints filled mastic filling comprising of one part of heated bituminous 85/25 and 3 parts of sand (all by weight), complete all as specified and directed. |
| 35 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick (premium quality) Square/rectangular, area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 15mm thick screed bed in cement mortar 1:4, complete all as specified and as directed. |
| 36 | M&L for glazedceramic coloured tiles of size 450x350x7 mm thick,(premium quality)on vertical surface of wall such as dado, skirting, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 10mm thick screed bed in cement mortar 1:4, complete all as specified and as directed. |
| 37 | M&L forsolid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube,complete all as specified and directed. |
| 38 | M&L forfactory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail : Panelling of plain colour PVC sheet to be fitted in the M. S . frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing mentioned in SSR Part-II 2020, complete all as specified and directed. |
| 39 | S&F for aluminium anodized barrel tower bolts 150 mm long of extruded section (ISI marked) ,complete all as specified and directed. |
| 40 | S&F for 100mm long butt hinges medium weight cold rolled mild steel (ISI Marked) , complete all as specified and directed. |
| 41 | S&F for extruded aluminium alloy handles size 150mm fabricated type anodised (ISI marked), complete all as specified and directed. |
| 42 | S&F for vitreous China water closet (squatting pan) Orrisa pattern 680x470 mm size pan, white, with front or back inlet with integral "foot rests including provn of lime concrete bedding including connections to flushing cistern with flush pipe, completeall as specified and directed. |
| 43 | S&F for 10 ltrs capacity (PVC), valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed. |
| 44 | S&F for vitreous China wash basin, white, flat back, size 550x 400mm excluding taps, waste chain and plug and pocelan stopper but including brackets ,complete all as specified and directed. |
| 45 | S&F for vitreous chinaurinal, half stall type aqua seal premium quality including flush pipe inlcuding PVC waste pipe and outlet, complete all as specified and directed. |
| 46 | S&F for rotational moulded polythylene water storage tank (ISI marked) with float valve, plastic lid cover, multy-layered, cylindrical vertical with closed top, hoisted and fixed in position of capacity 500 ltrstank and making connections inlcuding suitable GI wash out, over flow, nipple and including 20mm bore ball brass valvewith union screwed for iron pipe and fixed, complete all as specifed and directed. |
| 47 | S&F for 15 mm bore galvanised iron GI tubing medium grade with all fittings such as bends, socket, tee, elbow, union, nipple, short pieces and fixed to walls, ceilings or laid in floors etc, complete all as specified and directed. |
| 48 | S&F for 20 mm bore galvanised iron GI tubing medium grade with all fittings such as bends, socket, tee, elbow, union, nipple, short pieces and fixed to walls, ceilings or laid in floors etc, complete all as specified and directed. |
| 49 | S&F for 25 mm bore galvanised steel GI tubing medium grade with all fittings such as bends, socket, tee, elbow, union, nipple, short pieces and fixed to walls, ceilings or laid in floors etc, complete all as specified and directed. |
| 50 | S&F for 15mm bore angle valve, cast copper alloy screwed down, high pressure with crutch or butterfly handle, chromium plated, fancy type, screwed both ends for iron pipe or for unions and fixed complete as in repair all as specified and directed. |
| 51 | S&F for 15mm bore bib tap cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete as in repair all as specified and directed. |
| 52 | S&F for 15mm bore fancy type pillar taps, cast copper alloy, with capstan heads, brass chromium plated, screwed down high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and directed. |
| 53 | S&F for PVC connection 15 mm x 600 mm including PTMT nuts at both ends screwed for iron pipe of 15 mm bore, complete all as specified and directed. |
| 54 | M&Lfor 110mm bore PVC (SWR) single socketed soil, waste and vent pipes in any length with or without ears withsolvent joints laid in treanches and floors, complete all as specified and directed. |
| 55 | M&Lfor 110mm bore PVC (SWR) tee or branch pieces single ordinary or inverted or with parrallel branches but fitted with oval acesses door,complete all as specified and directed. |
| 56 | S&F for 110 mm bore PVC (SWR) cowl, complete all as specifed and directed by Engr-in-Charge. |
| 57 | S&F for 110 mm bore PVC (SWR) bend any radius, complete all as specifed and directed by Engr-in-Charge. |
| 58 | M&Lfor 75mm bore PVC (SWR) single socketed soil, waste and vent pipes in any length with or without ears withsolvent joints laid in treanches and floors, complete all as specified and directed. |
| 59 | S&F for 75 mm bore PVC (SWR) bend any radius, complete all as specifed and directed by Engr-in-Charge. |
| 60 | M&Lfor 75mm bore PVC (SWR) junction double equal or unequal "T" (double T), complete all as specified and directed. |
| 61 | S&F 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement and connecting to waste pipe, complete all as specifed and directed. |
| 62 | S&F for 600x450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washer, complete all as specified and directed. |
| 63 | S&F for steel ventilators with top hung shutter including hinges, steel peg stay complete all as specified and directed. |
| 64 | M&L for mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks or portion framed and hung as gates, including pintel hinges, stops, hand made sliding bolt etc and similar work conforming to Fe 290 or E-165 work including welded fabricks frames, gate and framed truss etc,complete all as specified and directed. |
| 65 | S&F for existing water proofing treatment, over RCC roof, projections of any thickness, any type by stripping out old tar felt over roofs, parapets, chimney stacks etc laid horizontally or vertically including taking out layer of cement plaster etc and cleaning the surface with wire brush including removing debris from the site and depositing inlow lying area where directed and providing following :- (a)Rendering 10mm thick in cement mortar 1:3on concrete roof surfaces and finish the surface even and smooth without using extra cement including mixingwater proofing compound @ 2% by weight of cement. (b)Apply a coat of bituminous primer confirming to IS-3384@ 0.4 ltr/Sqm on newly plastered surface after curing as per IS-456 and dried. (c)After the primed surface has dried, apply a coat of hot blown bitumen(85/25 penetration) confirming to IS-702 @ 1.2 Kg/Sqm of the surface. (d)Provide polymeric water proofing membrane ISI marked laid with overlaps, bonded with hot blown bitumen, and laid by torch application method, end overlaps shall not be less than 150mm and side lap 75mm. Polymeric water proofing membrane should be five layered with centre core as 90 micron high molecular high density polyethylene film, min weight 3 Kg per sqm & minimum 3mm thick reinforced with polyster non wove fabric, APP membrane shall laid acorss the slop from lowest line of sloping roof towards ridge. (e) Over the APP membrane, apply a coat of semi hot blown 85/25 penetration grade bitumen confirming to IS-702 @1.20 Kg/ sqm and blinded with fine sand in dry condition @ 0.50 Kg / Sqm dusted over the bitumen coat Note : (i) Care shall be taken to avoid wrinkle and air gaps while sticking membrane to the bitumen applied surface.(ii) Ponding test shall be conducted for 72 hrs as directed. (iii) Rate of PCC levelling course and WPC will be included in the quoted rate. |
| 66 | M&L for construction ofsoakage well 1.2 m dia and 3.00 m deep (for 05 user) including excavation and earth work in any type of soil, PCC 1:3:6, type C-2 in foundation,walls of honey combed masonry with top ring of M-25 concrete including intercerpting chamber and screen chamber made of brick masonry in cement mortar 1:4, RCC cover slab in M-25, interconnecting pipes of RCC, complete filled with brick bats complete all as specified and shown on drawing No CE/TD 1202/2008 SH 1/2 & 2/2 and as directed at site by Engr-in-Charge. |
| 67 | M&L for construction ofLLDPE septic tank (conventional) of capacity 5 users designed to carry sewage and sludge water, excavation in any type of soil, PCC 1:4:8, type D-2 in foundation, vent shaft, connection etc including returning , filling of soil at sides of tank, well ramming in layers and removing excavated surplus soil to a distance not exc 50m, complete all as specified and directed by Engr-in-Charge. |
| 68 | M&L for new concrete bed plain cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in bed drain pipespacking under haunching against the sides ofpipes of 150mm bore other they are laid and tested, complete all as specified and directed. |
| 69 | S&F for salt glazed stoneware drain pipe in position, including jointing socket end of new pipe to same with packed spun yarn and cement mortar (1:1) for internal dia of pipe of 150mm dia, complete all as specified and directed. |
| 70 | M&L for salt glazed stone ware gully trap, square or round mouthed P type, having size 150 x 150 mm fixed in position, complete all as specified and directed. |
| 71 | M&L for rendering 15 mm thick in cement mortar 1:4 on other than fair faces of brick wall , finished the surface even and smooth without using extra cement mixing with water proofing compound as per manufacturer instructions, complete all as specified and directed. Note: Rate of WPC will be included in the quoted rate. |
| 72 | M&L for providing pre-cast cement concrete landing cover slabs (for manholes etc) chullah hoods, chajjas, water troughs, mangers, shelves and similar items with plain faces in cement concrete 1:2:4 type B-1 using 20mm grading stone aggregate and setting in cement morter 1:6, complete all as specified and directed |
| 73 | Surface excavation in any type of soil n.exc 30cm deep and averaging 15cm deep and getting out, complete all as specified and as directed. |
| 74 | M&L for 100mm thick plain cement concrete 1:4:8, type D-2 using 40mm graded crushed stone aggregates as in sub base of path etc, complete all as specified and directed. |
| 75 | M&L for pre polished chequered cement concrete tiles of size 20 cm x 20cm x 25 mm thick set, jointed and pointed with neat cement slurry in floor, including 20mm thick screed bed or bedding layer in CM 1:4, complete all as specified and as directed. |
| 76 | Providing cement concrete 1:2:4 type B-1 as in roof kerbs or mud stops, gola, rounded or chamfered in edges complete all as specified and directed. |
| 77 | Material & Labour for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 78 | S&F for pressed steel frame for doors with one or morerebates of size 105x60mm including necessary fixing lugs, hinges, lock and strike plate etc including back filling of chowkhats with PCC 1:3:6 type C-1 using 20mm graded stone agregate, complete all as specified and directed. |
| 79 | M&L for factory made single extruded WPC (wood polymer composit) solid plain flush door shutter of 30mm size comprising of virgin polmer of K value 58-60 (suspension grade), calcium carbonate and natural fibres (wood powder / rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100gms) having minimum density of 650 kg/cum and screw withdrawl strength of 1800 N (face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of class A category with property being termite /borer proof, water /moisture proof and fire retardant and fixing ewith stainless steel butt hinges of required size with necessary full body threaded star feaded counter sunk stainless steel screws, complete all as per specified and directed. Note:- Stainless steel butt hinges and necessary SS screws shall be included in the quoted rate) |
| 80 | S&F counter sunk oval shape viterous china wash hand basin, white, size 560x410mm fixed to granite plateform including cutting of granite in oval shape, including all accessories but excluding tap complete all as specified and directed. |
| 81 | M&L for 20mm thick granite stone slab (of any type) work (table rubbed and polished) in cooking platforms, in steps, pillars, jambs, window cills, etc, laid over 15mm thick bedding in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite slab, rounding edges etc after dismantling of old unserviceable tiles/ stone slab complete all as specified and directed. |
| 82 | M&L for 20mm thick granite stone slab (of any type) work (table rubbed and polished) for wall lining (veneering to wall) in 12mm thick cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite after dismantling of old unserviceable tiles/ stone slab complete all as specified and directed. |
| 83 | S&F for sheet glass 5.5 mm thick, ordinary quality and fixed with aluminum & rubber beading in square n. exc 0.5 sqm in each pane, complete all as specified and directed. |
| 84 | S& F for stainless steel wire cloth, 0.63mm nominal dia of wire and average width of aperature 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed. |
| 85 | Sch "A" Part-II(E/M Works) M&L for point wiring for one light point/fan point controlled by one-one way switchwith 1.5 Sqmm. (nominal area) single core FRLS,PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor unsheathed in and includingPVCcasing & caping medium grade of 20mm width complete with all acessories including PVC sunk box ISI marked for mounting of switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet as top cover, and 1.5 Sqmm. (nominal area) single core FRLS, PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor cable as earth wire upto common earth and connected to earth dolly including making goodthe diturbed surfaces compete all as specified and directed. (Note:- Three run of copper conductor of required size and one run of casing capping measured as one unit and also colour coding of wiring to be followed as red/yellow/blue for phase, black for neutral and green for earth) |
| 86 | M&L for switch piano, flush type single pole, one way 5 Amp, 240 volts complete all as specified and directed. |
| 87 | M&L for LED Tube light fitting, complete with 1x 20 watts, 220V, AC decorative box type with driver, holder in andincluding LED tube light connection complete prewiredand connecting electrically to ceiling rose to fitting using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core and connector block etc and necessary fixing arrangement at any height complete all as specified and directed. |
| 88 | S&F for exhaust fan of 300mm sweep, heavy duty, 1200 RPM electrical operated 230 Volts AC single phase, steel body blades, frame with allaccessories and louver etc, complete all as specified and directed. |
| 89 | M&L for sheet metal enclosure MCB distribution board, double door single pole and neutral with IP-66 protection single phase 240 volts 4 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete as in repair all as specified and directed. (Note:-MCBs will be measured separately.) |
| 90 | M&L for MCB single pole,240 volts any rating from 6 to 32 amps, "C" series/curve with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed. |
| 91 | M&L for MCB single pole & neutral 240 volts any rating from 40 to 63 amps, "C" series/curve with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed. |
| 92 | Supply, laying, jointng and testing,XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 10 Sqmm 2 core laid in trenches, ducts, pipes, on poles and connection with necessary cables lugs, glands, complete all as specified and directed. |
| 93 | M&L for dry sand cushioning to underground cable, provided with a layer 8 cm thick before and 15 cm deep after laying and stretching jointing and testing the cable complete all as specified and as directed. (Note: Punned thickness of sand shall be measured and paid). |
| 94 | M&L for Sub class "B" old size bricks, laid dry flat over the cable abutting each other, length of cable equal to width of brick, complete all as specified and directed |
| 95 | M&L for cutting, threading and inserting tee for taking new branch connection from existing pipe line of any size for the pipe size 25mm, complete all as specified and directed by Engr-in-Charge. |
| 96 | M&L for 25mm bore gun metal, gate / globe valve with iron wheel head screwed on both sides for iron pipes and fixed,complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
