Military Engineer Services-MES has published Tender For Petty Repair And Day To Day Maintenance Works At Svn Colony Ge Complex And Mes Key Personnel Qtrs And Site A Under Age Br I Of Ge Nd Visakhapatnam. Submission Date for this Tender is 07-06-2024. Marine Work Tenders in visakhapatnam Andhra Pradesh. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| 8299Tender.pdf | Tender Document | 0 KB |
| BOQ_732471.xls | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| 53e5fb1b-54e5-482a-a1c1-bfcd73ffb3cd.html | Tender Notice | 0 KB |
| Sl. No. | Item Description |
| 1 | The rates quoted by the tenderer shall deemed to be inclusive for the following provisions in addition to the other conditions specified in the tender documents. No claim whatsoever shall be entertained at a later date on this account:- [i]The repairs shall be done by skilled workmen in the relevant field to the entire satisfaction of Engineer-in-Charge. The contractor shall engage sufficient manpower for the entire period so that progress of work shall not be hampered due to non availability of labour at any time. [ii]The contractor on getting information through Site order / Works diary regarding the nature of repair to be carried out, he shall immediately respond to the same and make all out efforts to carry out the same on priority within 48 hours. In case of any delay in responding / attending the repairs within 48 hours, the GE may at his absolute discretion impose penalty on the contractor at Rs. 100/- per day per each work ordered upto 05(Five) days and Rs. 200/- per day thereafter till completion of the work in case of delay without valid reasons as decided by GE. [iii]Further, the above penalty is applicable even for the multiple locations of work at the same period. It is the responsibility of contractor to make suitable arrangements for attending the repairs simultaneously at all the places. [iv]The decision of the GE as to whether a particular repair has been attended or not on a particular day will be final and binding. The above penalty shall be in addition to the provisions made in clause 50 of IAFW-2249 i.e (Compensation for delay in completion of work). NOTE:- Tenderers/bidders are advised to visit the site and see the buildings themselves and quote their rate accordingly and no claim whatsoever in this regard shall be admissible at any later stage. |
| 2 | Taking down shutters of any description n exc 1 sqm each upto 9th floor |
| 3 | Taking down shutters of any description exc 1 Sqm but n.exc 2 Sqm upto 9th floor |
| 4 | Taking down chowkats or frames not exc 1.5 sqm each without taking off shutters from the frameupto 9th floor. |
| 5 | Taking down chowkats or framesexc 1.5 sqm but not exc 4 Sqm each without taking off shutters from the frameupto 9th floor |
| 6 | Resecuring or easing & adjusting without taking down shutters of any description n.exc 1 Sqm each upto 9th floor |
| 7 | Resecuring or easing & adjusting without taking down shutters of any description exc 1sqm but n.exc 2 sqmupto 9th floor |
| 8 | Taking down shutters of any description n. exc 1 sqm each and refixing in same opening upto 9th floor |
| 9 | Taking down shutters of any description exc 1sqm but n.exc 2 sqmeach and refixing in same opening upto 9th floor |
| 10 | S&F Mild steel Angles, bars, flats etc., as in supports for stiffening of fencing, wall ties, hold fasts, clamps, plain angle cleats for securing purlins and similar small articles confirming to Fe 410-0 or Fe-310-Oupto 9th floor |
| 11 | M&L for PlainCement Concrete Type C1 1:3:6 (using 20mm graded granite stone aggregate) cast in situ in lintels up to 1.5 M span, cillsand other similar bands, plinth courses, parapets, copings, bed plates and the like including weathering, slightly rounded or chamfered angles and throating as directed including use and waste of form workupto 9th floor |
| 12 | S&F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at jointsupto 9th floor |
| 13 | S&F 30 mm thick factory made second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc, divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut mitered beads for securing glass etc all as per clause 8.24 (b) of SSR Part I 2009upto 9th floor |
| 14 | S&F 35mm thickfactory made second class hard wood, kiln seasoned and chemically pressure treated plain framed, panelled shutter with lock rail and panel of 9mm BWP Commercial ply or 12mm veneered particle board with commercial face veneers on both faces all as per clause 8.24 (a) of SSR Part I 2009upto 9th floor |
| 15 | S&F 35mm thickfactory made second class hard wood, kiln seasoned and chemically pressure treated plain framed, panelled shutter with lock rail and panel of 9mm BWP Commercial ply or 12mm veneered particle board with commercial face veneers on both faces all as per clause 8.24 (a) of SSR Part I 2009upto 9th floor |
| 16 | S&F factory made solid fixed ventilator of size 50x47mmmade out of extruded 5mm thick PVC sheet mitred cut at two corners and joined with 2Nos of 150mm long brakets of 15x15mm MS square tube, the two vertical porfiles are to be reinforced with19 x 19 mm MS tube and50% of portion is fixed with 3 mm thick pin headed/frosted glass and remaining portion is covered with wire mesh and 3 mm thick pin headed/frosted glass louvers including 12mm dia MS guard bars and necessary fixtures. |
| 17 | S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per specification and drawing up to 9th floor |
| 18 | S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top and bottom rails MS frames shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width inside upto 9th floor |
| 19 | S&F butt hinges medium weight 100 mm long cold rolled mild steel upto 9th floor |
| 20 | S&Fstainless steel butt hinges medium weight 100 mm long for PVC doors upto 9th floor |
| 21 | S&F in repairs butt hinges medium weight 100 mm long cold rolled mild steelupto 9th floor |
| 22 | S&F 75mm long medium weightMS butt hinges upto 9th floor |
| 23 | S&Fin repairs 75mm long medium weightMS butt hingesupto 9th floor |
| 24 | S&F 100 mm aluminium anodised barrel tower bolt of extruded sectionupto 9th floor |
| 25 | S&F in repairs 100 mm aluminium anodised barrel tower bolt of extruded section upto 9th floor |
| 26 | S&F 100 mm aluminium handles, cast type anodisedupto 9th floor |
| 27 | S&Fin repairs 100 mm aluminium handles, cast type anodised upto 9th floor |
| 28 | S & F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section upto 9th floor |
| 29 | S & F in repairs 200 mm long Aluminium, anodised, barrel tower bolts of extruded section upto 9th floor |
| 30 | S & F 300mm long Aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloyupto 9th floor |
| 31 | S & F in repairs 300mm long Aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy upto 9th floor |
| 32 | S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised upto 9th floor |
| 33 | S & F in repairs 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised upto 9th floor |
| 34 | S&F 150 mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor |
| 35 | S&F in repairs 150 mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor |
| 36 | S& F in repairs rubber beading 50 mmwide and5 mm thick |
| 37 | Carefully removal of existing grill from windows and refix in new window including necessary screws etc upto 9th floor |
| 38 | Dismantling wrought iron or mild steel work of any description not otherwise provided for |
| 39 | S & F in repairs framed work such as grills grating, etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conformingto FE 290, Gde E-165 complete all as specified and as directed upto 9th floor |
| 40 | S & F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire stapels including old or new beading complete all as specified and as directed upto 9th floor |
| 41 | S & F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire stapels including old or new beading complete all as specified and as directed upto 9th floor |
| 42 | Hacking out old broken glass (any thickness size quality or description) from wooden , steelor aluminium frames glazed with putty or fixed with wooden beads complete all as directedupto 9th floor |
| 43 | S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty or beading in squares n.exc 0.5 sqm in each paneupto 9th floor |
| 44 | S&Fin repairs 20mm dia aluminium curtain rod with brackets etc all as specified and directed |
| 45 | S&F in repairs Plate racks made out of 0.8 mmthick .stainless steel, of size 750x600x 250 mm all as specified and directedupto 9th floor |
| 46 | S & F in repairs18/19 mm thick ply wood, BWR, exterior grade, commercial type, fixed with screws to timber frame work for built in cupboards, shelves,almirahs etc all as specified and as directed by Engineer in Charge. |
| 47 | S & F in repairs 0.8 to 0.9 mm thick decorative laminate type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer"s instructions all as specified and as directed. |
| 48 | M&L for preparation of new wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of primerupto 9th floor |
| 49 | M&L for preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of primerupto 9th floor |
| 50 | Taking down cement plaster onbrick work, racking out joints, hacking for key scrubbing down with water etc complete and removing outside MD land . |
| 51 | M&L for rendering 5mm thick in CM 1:3 on fair faces of ceiling surfaces finished even & smooth without using extra cementupto 9th floor complete all as directed |
| 52 | M & L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished the top surface even and smooth without using extra cement with necessary safety measures i.e.scaffoldings/hanging platform upto 9th floor complete all as directed |
| 53 | M & L for rendering to brick / concrete surfaces, 15 mm thick in Cement Mortar 1:4, including mixing water proofing compound as per manufacturers instructions and finishing the top surface even and smooth without using extra cement complete upto 9th floor all as specified and as directed. Note: Water proofing compoundwill be measured and paid separately. |
| 54 | Supply only Water proofing compound of approved make upto 9th floor |
| 55 | M&L for preparing old plastered or unplastered surfaces by brooming down and applying one coat of white wash on ceiling |
| 56 | M&Lfor preparing old painted wooden surfaces over 10cm width or girth and applying one coats of synthetic enamel paint all as specified |
| 57 | M&Lfor preparing old painted steel surfaces over 10cm width or girth and applying one coats of synthetic enamel paint all as specified |
| 58 | M & L forComplete removal of existing treatment and applying two coats of distemper oil emulsion over a coat of primer with necessary safety measures i.e.scaffoldings/hanging platformupto 9th floors complete all as specifiedand directed |
| 59 | M&L for Preparing oldsurfaces of walls by washing rubbingdown and stopping of distempered and painted surfacesand applying one coat of distemper oil emulsionupto 9th floor |
| 60 | M&L for Preparing newly Plastered Surfaces of walls and applying two coats of cement base paint over a coat of primer, complete all as specified and as directed |
| 61 | M&L for Preparing newly Plastered surfaces of walls and applying two coats ofdistemper oil emulsion (Oil bound washable distemper) over a Coat of chalk whitening complete all as specified and directed. |
| 62 | M&L for Preparing newly Plastered surfaces of ceiling and applying two coats of white wash, complete all as specified and directed |
| 63 | M & L Preparing old surfaces of walls by brooming and washing down and applying one Coat of exterior weather coat with necessary safety measures i.e.scaffoldings/ hanging platform upto 9th floors all as per specified and directed by engineer in charge. |
| 64 | Repair to leakage of bib taps,pillarcock,stop cock, PVC connection, waste pipes, anglevalve, concealed valve, GI union jointsof GI pipe andRe-fixingof bottle trapetc bychanging the washers, spindles or any other minor accessoriesall as specified and directed |
| 65 | S&F in repairs PTMT bib tap 15mm dia with crutch or butter fly handle screwed down, screwed for iron pipe or forbrass ferrule complete with check nut all as specified |
| 66 | S&F in repairsPTMT bib taplong body 15mm diawith crutch or butter fly handle screwed down, screwed for iron pipe or forbrass ferrule complete with check nut all as specified |
| 67 | S&F in repairsbib taps 15mm bore (for iron pipe) cast copper alloy fancy type chromium plated butter fly handle screwed down complete all as specified. |
| 68 | S & F in repairs Bib taps long body, cast copper alloy, 15 mm dia, chromium Plated, fancy type with crutch or butterfly handle, screwed down for iron pipe and fixed etc. complete all as specifiedMake: Jaquar Catalogue No. CON-107KN or its equivalent as approved by GE upto 11th Floor |
| 69 | S&Fin repairs chromium plated brass pillar taps 15mm borecast copper alloy fancy type complete all as specified Make: Jaquar or its equivalent as approved by GE |
| 70 | S&Fin repairs chromium plated brass shower arm heavy duty casted with wall flange complete all as specified Make : Jaquar or its equivalent as approved by GE |
| 71 | S&F in repairs angle/stop valves 15mm bore (for iron pipe)fancy type chromium plated screwed down high pressure with butterfly handle screwed both ends all as specified. |
| 72 | Repairto high/low levelflushing cistern by adjusting the float valve and stop leakage of PVCconnection andPVC/CI bendincludingreplacing of rubber washer,check nuts, etc for any type of flushingcistern all as specified |
| 73 | S&F in repairs PTMT flush handlewith adjustable lever and hook for low level flushing cistern all as specified. |
| 74 | S&F in repair 10 Ltr capacity PVC valveless, syphonic action type flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, complete all as directed. ( Make:JAQUAR/HINDWARE/CERA) |
| 75 | S&Fin repairs Ball valves 20 mm dia high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe upto 9th floor |
| 76 | S&Fin repairs Ball valves 25 mm dia high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe upto 9th floor |
| 77 | S&Fin repairs Ball valves 15 mm dia high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe upto 9th floor |
| 78 | Removal of air lock/blockage of water in G I Tubing 15/20mm bore including taking down (if required) cleaning the pipe or fitting etc and refixing the same in position complete all as directed |
| 79 | Taking down existing PVC waste pipe and S&F new PVC flexible pipe 32/40 mm dia with socket, 60 cm long for WHB/Sink |
| 80 | S&F in repairs 45 cm long PVC connection with two no PTMT nut and rubber washers suitable for 15mm bore GI Pipe all as specified |
| 81 | S&F in repairs60 cm long PVC connection with two no PTMT nut and rubber washers suitable for 15mm bore GI Pipe all as specified |
| 82 | S&Fin repairs PTMT waste coupling 31/32mm bore |
| 83 | S&F in repair PTMT Grating 100 mm dia upto 9th floor |
| 84 | S&F in repair PTMT Grating 125 mm diawith waste holeupto 9th floor |
| 85 | S&F in repairs chromium plated grating of size 125mm dia (with hole or without hole) complete all as specified |
| 86 | S&F in repair 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to wallsincluding taking down old pipe complete all as directed |
| 87 | S & F in repairs PVCbends110mm dia complete all as specified and directed |
| 88 | S&F in repair 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to wallsincluding taking down old pipe complete all as directed |
| 89 | S & F in repairs PVCbends75mm dia complete all as specified and directed. |
| 90 | Cutting around existing pipe 100/75 mm dia in brick work including pipe joint and M&L for Cement mortar 1:1 including water proofing compound and curing minimum seven days and after confirming that no leakage and then making good to the entire satisfactation of the Engineer-in-Charge. |
| 91 | S&F in repairs plastic WC seat cover of any colour pedestal pattern , closed pattern with flat bottom,and cover and mild steel chromium plated or aluminised hinging devices complete all as specified |
| 92 | S&F in repairs 15mm dia concealed stop cock chromium plated with long screw down high pressure with crutch or butterfly handle screwed both end for iron pipe. |
| 93 | S&F in repairs 20 mm bore gun metal globe or gate valve with iron wheel heads screwed both ends for iron pipe . |
| 94 | S&F in repairs small GI fittings15 mmsuch assocket ,tee elbow, nipple 75mm long ,union andreducer 20x15mm /reducer 20x25mm,tee of unequal size/ Elbow etc (as requiredat site) all as specified and directed |
| 95 | S&F in repairs small GI fittings20 mmsuch assocket ,tee elbow, nipple 75mm long ,union andreducer 20x15mm /reducer 20x25mm,tee of unequal size/ Elbow etc (as requiredat site) all as specified and directed |
| 96 | S&F inrepairs15 mm bore gun metal globe or gate valve with iron wheel heads screwed both ends for iron pipe . |
| 97 | S&Fin repairs 75 mm diafancy type shower rosebrass chromium plated withC P arms for 15mm bore GI pipe. |
| 98 | S&F in repairs Sink with drainage board made of stainless steel 1 mm thick kitchen or laboratorieswith plugs, washer and wastes, including bedding in cement mortar on to dwarf wall or includingfixingcantilever brackets and connecting union to pipe overall size 915x 460 mmbowl size 410x330x160mm complete all specified and directed |
| 99 | S&F 600mm x 450 mm bevelled edge mirror of selected quality glass mounted on 6 mm thick plywood fixedon wall with wooden plugs with chromium plated brass screw & cup washer |
| 100 | Draining out water from existing water storage tank and cleaning silt deposited therein,washing out with bleaching powder including taking down connection andrefixing |
| 101 | S&F 15mm bore GI tubing medium grade with all fittings and fixed complete to wall and ceiling or laid in floors including cutting grooves and making good in CM (1:3) or PCC (1:2:4) for concealed tubingincluding taking down old GI tubing 15mm dia complete all as specified and directed |
| 102 | S&F 20mm bore GI tubing medium grade with all fittings and fixed complete to wall and ceiling or laid in floors including cutting grooves and making good in CM (1:3) or PCC (1:2:4) for concealed tubingincluding taking down old GI tubing 20mm dia complete all as specified and directed |
| 103 | S&Fin repairs MS angle of size 35x35x5 mm and 350 mm long for wash basin or sink base and embedded in brick wall and making good of disturbed surface complete all as specified anddirected. |
| 104 | S&F in repairs vitreous China squatting pan "orissa" pattern white colour of size 580x440mm with integral foot rests includingprovision of lime concrete bedding and P traps all as specified |
| 105 | S&F in repairs wash down water closet (pedestal pattern) of any colour including fixing of bolts complete all as specified |
| 106 | S&F in repairs Vitreous china wash basin white flat back of size 550x400mm including cutting for and pinning in ends of brackets includingfixing of 32 mm low density polyethylene pipes (LDPE) of pressure rating 6kg/cm2,coupling, PVC connection with 15 mm PTMTchecknuts, brackets complete all as directed |
| 107 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for sunken floorsupto 9th floor complete all as directed |
| 108 | M & L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished fair and even without using extra cement and mixed with water proofing compound upto 9th floor complete all as directed Note : Water proofing compound shall be measured and paid separately under relevant item. |
| 109 | M & L for applying Nitto bond two coats on plastered surfaces as per manufacturer instructions etc upto 9th floor complete all as specified . |
| 110 | M & L for Plain cement concrete, 1:5:10, type E2,(using 40mm graded granitestone aggregate) asinfilling and mass concrete etc in sunken floor upto 9th floor complete all as specified . |
| 111 | M&L for 25mm thick PCC 1:2:4, type B0 (using 12.5mm graded stone aggregate) as insub base offloor upto 9th floor complete all as directed |
| 112 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish off the premises out side MD land |
| 113 | M&L for non skidceramic colourtiles of size 400 x 400 x 7/8 mm thick, as in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match including screed bed of 15mm thick in cement mortar 1:6 complete all as specified |
| 114 | M&L for non skidceramic colourtiles of size 300 x 300 x 7/8 mm thick, as in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match including screed bed of 15mm thick in cement mortar 1:6 complete all as specified |
| 115 | Demolition of reinforced cement concrete above ground level complete all as specified |
| 116 | M&L for coloured glazedceramic tiles of size 300x450 x 7 to 9 mm thick on vertical surfaces such as skirtings, dados and risers for steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including backingof 10mm thick in cement mortar 1:4 complete all as specified |
| 117 | M&L for Vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm, as in floors etc set & jointed in neat cement slurry & pointed in white or dark coloured cement to match including screed bed of 15mm thick in cement mortar 1:6 complete all as specified |
| 118 | M&L for Providing and injecting chemical emulsion for Anti Termite Treatment along the external wall below concrete or masonry apron using chemical emulsion at the rate of 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified |
| 119 | M&Lfor ATT at points of contact of wood work by chemical emulsion (in oil or kerosine based solution) @ 0.5 litre per hole by drilling 6mm dia holes at downword angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified |
| 120 | S & F in repairs Health Faucet with 1.5 m Stainless steel flexible tube, wall hook, non return valve complete all as specified up to 9th Floor Make : Jaquar Catalogue No. ALD-563 or its equivalent as approved by GE |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
