|
| 1 | A)GEAR AND GEAR COMPONENTS FOR TATA VEHICLES |
| 2 | 4th Speed Gear on Counter Shaft 28T |
| 3 | 3rd Speed Gear 26T |
| 4 | 4th SpeedHelical Gear(T- 20) |
| 5 | Synchronising Sleeve 2/3 Tata 1510and Tata BS VI CNG |
| 6 | Synchro Kit GBS 40 and Tata BS VI CNG |
| 7 | Drive Shaft Ratio 1:7 :5 |
| 8 | Drive Shaft GB 40 |
| 9 | Main Shaft GBS 40 |
| 10 | Synchro Ring 5th Speed for Tata BS VI CNG |
| 11 | Synchro Sleeve |
| 12 | Synchro Cone for Tata BS VI CNG |
| 13 | Shifter Sleeve for Ta BS VI CNG |
| 14 | Gear 4th Speed (T-19) GBS 40 and Tata BS VI CNG |
| 15 | Coller Bush 44.5 mm for Tata CNG BS VI |
| 16 | Collar Bushing 44.6 mm for Tata BS VI CNG |
| 17 | Helical Gear 3rd Speed GBS40 and Tata BS VI CNG |
| 18 | SynchronisingBody2nd & 3rd |
| 19 | Helical Gear 2ndSpeed GBS40 ( T-22) and Tata BS VI CNG |
| 20 | Gear Wheel1st GBS 40 (T- 39) |
| 21 | Double Gear Counter Shaft GBS40 |
| 22 | 4th Gear on Counter Shaft GBS40 |
| 23 | GearConstant Mesh Counter Shaft 1:7:5 |
| 24 | Reverse Idler Gear with BushPart No. 3212630450 |
| 25 | Assy. Drive Shaft (Ratio 9.19) G 600 |
| 26 | Main Shaft (6 Speed) G 600 |
| 27 | Assy. Helical Gear2nd Speed G 600 |
| 28 | Engaging Gear(1/2Gear)G 600 |
| 29 | SynchroconeSteel (Machined) (1/2/3/4 ) |
| 30 | Shifter Sleeve (1st/2nd/3rd/4th) G 600 |
| 31 | Assy 1st Gear(Main Shaft) G 600 |
| 32 | Engaging Gear (Reverse) G 600 |
| 33 | Reverse Gear( Main Shaft) G 600 |
| 34 | Speedo Gear( Main Shaft) G 600 |
| 35 | Assy 3rd Gear(Main Shaft) G 600 |
| 36 | Engaging Gear (3/4 Gear) G 600 |
| 37 | Assy 4th Gear(Main Shaft) G 600 |
| 38 | Assy 5th Gear (Main Shaft) G 600 |
| 39 | SynchroconeForged(5th & 6th Speed)G 600 |
| 40 | Engaging Gear (5/6 Gear) G 600 |
| 41 | Shifter Sleeve (5th & 6th ) G 600 |
| 42 | Counter Shaft(6 Speed)G 600 |
| 43 | 3rd Gear Counter ShaftG 600 |
| 44 | 4thGear Counter ShaftG 600 |
| 45 | 5th Gear Counter ShaftG 600 |
| 46 | Constant MeshGear with 40 teeth for GB 600 |
| 47 | Constant MeshGear with 40 teeth for GB 600 |
| 48 | Constant MeshGear with 39 teeth for GB 600 |
| 49 | Reverse Idler Gear Counter Shaft G 600 |
| 50 | Synchro kit |
| 51 | Speedo Pinion for G 600 Gear Box Housing & Covers |
| 52 | Reverse Idler Shaft for G 600 Gear Box and Tata BS VI 11 MTR & 12 MTR |
| 53 | Drive Assy. |
| 54 | Main Shaft |
| 55 | Assy. Helical Gear 4th |
| 56 | Assy. Needle 5th cage |
| 57 | Helical Gear 3rd Speed |
| 58 | Helical Gear 2nd |
| 59 | Coupling Flange 8 Holes |
| 60 | Magnetic Drain Plug |
| 61 | Front CoverTata GBS 40 |
| 62 | Shifting Lever Tata GBS 40 |
| 63 | CarrierII/V th speed |
| 64 | Selector Fork |
| 65 | Shifting Fork 4/5 th |
| 66 | Shifter Shaft 5th & 6thG600 |
| 67 | Shifter Dog5th & 6th G600 |
| 68 | Shifter Fork 5th & 6th G600 |
| 69 | Shifter Shaft 3rd& 4th G600 and Tata BS VI 11 MTR & 12 MTR |
| 70 | Shifter Dog3rd& 4th G600, G750 and Tata BS VI 11 MTR & 12 MTR |
| 71 | Shifter Fork(1st/2nd & 3rd /4th) G600 and Tata BS VI 11 MTR & 12 MTR |
| 72 | Shifter Shaft (1st2nd) G600 |
| 73 | Shifter Dog(1st2nd ) G600 |
| 74 | Shifter ShaftReverseG600 |
| 75 | Shifter DogReverse G600 and Tata BS VI 11 MTR & 12 MTR |
| 76 | Shifter Fork Reverse G600 |
| 77 | Assy Detent for Tata BS VI 11 MTR & 12 MTR |
| 78 | Brass Pad for Tata BS VI 11 MTR & 12 MTR |
| 79 | Assy Coupling Flangefor GB 600 Main Shaft |
| 80 | Spacer ( Main Shaft)for GB 600 |
| 81 | Thrust Washer (Reverse Idler Gear ) for GB 600 and for Tata BS VI 11 MTR & 12 MTR |
| 82 | Selector & Shifter Yokefor GB 600 |
| 83 | Assy Gear Shift Lever Knob for GB 600 and Tata BS VI 11 MTR & 12 MTR |
| 84 | Assy Gear shaft Lever with Yoke for GB 600 |
| 85 | Assy Turning Tube without Ball Joint for GB 600 |
| 86 | Sub Assy Ball & Socket Joint Big for GB 600 and Tata BS VI 11 MTR,12 MTR & CNG |
| 87 | Link Rod for GB 600 and Tata BS VI 11 MTR & 12 MTR |
| 88 | Assy Ball Joint RH for GB 600 and Tata BS VI 11 MTR ,12 MTR & CNG |
| 89 | Assy Ball Joint for GB 600 and Tata BS VI 11 MTR & 12 MTR & CNG |
| 90 | Assy Shifting Leverfor GB 600 and Tata BS VI 11 MTR , 12 MTR and CNG |
| 91 | Packing Set for G 600 Gear Box |
| 92 | Rear Cover Upper for G 600 Gear Box |
| 93 | Front Cover for G 600 Gear Box |
| 94 | Cyl. Rollar Thrust Brg. |
| 95 | Synchro Cone |
| 96 | Needle Cage Assy |
| 97 | Needle Cage Dove |
| 98 | Needle Cage/ 1st speed Gear Assy. G 600 Gear Box Tata. |
| 99 | Coupling Flange |
| 100 | Lock Nut |
| 101 | B)GEAR AND GEAR COMPONENTS FOR TATA VEHICLES |
| 102 | Spaces |
| 103 | Circlip 2.7 THK |
| 104 | Circlip ( 2.8 mm Thick , 2.75 mm thk, 2.58 mm thk , 2.7 mm thk, 2.54 mm thk, 2.66 mm thk2.62 mm Thick,2.5 mm thk, 2.46 mm thk, 2.42 mm thk, 2.38 mm thk and 2.34 mm thk, ) for G750 & Tata BS VI 11mTr. & 12 MtrRequirement is any one of this hence rates shall be per each circlip (Please Refer Annexure - B For all parts numbers as there are multiple part nos.) |
| 105 | Counter Shaft |
| 106 | Oil Seal 1325 x 35 x 7 |
| 107 | Dowel Sleeve 10x40 |
| 108 | Dowel Sleeve 6x40 |
| 109 | Drive Shaft GB40 |
| 110 | 30308 Bearing |
| 111 | Counter Shaft ( 6 Speed) for G 750 and Tata BS VI 11 MTR & 12 MTR |
| 112 | 3rd Gear Counter Shaft for G750 Material EN 353 |
| 113 | 4th Gear Counter Shaft for G750 and Tata BS VI 11 MTR & 12 MTR |
| 114 | Over Drive Gear ( Counter shaft) for G 750 and Tata BS VI 11 MTR & 12 MTR |
| 115 | Constant mesh Gear Counter Shaft ( G900-OD) and Tata BS VI 11 MTR & 12 MTR |
| 116 | Reverse Idler Gear ( Twin Cone Version) For G 750 and Tata BS VI 11 MTR & 12 MTR |
| 117 | Reverse Idler Shaft For G 750 |
| 118 | Main Shaft ( Longer) for G750 |
| 119 | 2nd Speed Gear Main Shaft for G750 |
| 120 | Engaging Gear ( 1st/2nd Speed) Main Shaft for G750 |
| 121 | 1st Gear Main Shaft for G750 and Tata BS VI 11 MTR & 12 MTR |
| 122 | Engaging Gear( Reverse) Main Shaft for G750 and Tata BS VI 11 MTR & 12 MTR |
| 123 | Reverse speed Gear ( Main Shaft) for G750 |
| 124 | Speedo Gear main shaft for G750 |
| 125 | Gear 3rd Speed Main Shaft for G750 Material EN-353 |
| 126 | Engaging Gear 3rd/4th Speed Main shaft for G750 and Tata BS VI 11 MTR & 12 MTR |
| 127 | 4th Speed Gear Main Shaft for G750 Material EN-353 |
| 128 | Over Drive Main Shaft ( G900 – OD) |
| 129 | Engaging Gear ( 5th /6th speed) for G750 and Tata BS VI 11 MTR & 12 MTR |
| 130 | Assy Drive Shaft for G750 / 6.58 Highdeck R.E. and Tata BS VI 11 MTR & 12 MTR |
| 131 | Spacer For G 750 and Tata BS VI 11 MTR & 12 MTR |
| 132 | Thrust washer ( Reverse Idler Gear) for G750 |
| 133 | Synchro Ring ( 1st /2nd/3rd speed ) Main Shaft for G750 and Tata BS VI 11 MTR & 12 MTR |
| 134 | Assy Synchro Cone ( New Twincone Version) Main shaft for G750 and Tata BS VI 11 MTR & 12 MTR |
| 135 | Compression Spring Main Shaft for G750 |
| 136 | Retention Pin Main Shaft for G750 |
| 137 | Shifter Sleeve (1/2/3/4/5/6) Main shaft for G750 |
| 138 | Circlip ( 1.8 mm Thick , 1.9 mm thk, 2.00 mm thk , 2.1 mm thk, 2.2 mm thk, 2.3 mm thk and 2.4 mm Thick) for G750Requirement is any one of this hence rates shall be per each circlip (Please Refer Annexure - B For all parts numbers as there are multiple part nos.) |
| 139 | Spacer Main Shaft(10.4 thick, 10.5 mm thk, 10.6 mm thk, 10.7 mm thk, 10.8 mm thk, 10.9 mm thk, 11.0 mm thk , 11.1 mm thk, 11.2 mm thk, 11.3 mm thk, 11.4 mm thk , 11.5 mm thk, 11.6 mm thk ) for G750Requirement is any one of this hence rates shall be per each Spacer(Please Refer Annexure - B For all parts numbers as there are multiple part nos.) |
| 140 | Coupling Flange Dia 150mm serrated for G750 |
| 141 | Lock Nut Main Shaft for G750 |
| 142 | Synchro Ring (3rd Speed) Main Shaft for G750 and Tata BS VI 11MTR & 12 MTR |
| 143 | Synchro Cone (132 mm Dia Carbn Lining ) for G750 and Tata BS VI 11MTR & 12 MTR |
| 144 | Synchro Ring ( 4th Speed) for G750 and Tata BS VI 11MTR & 12 MTR |
| 145 | Spacer Main Shaft 4th Speed Gear for G750 and Tata BS VI 11MTR & 12 MTR |
| 146 | Snap Ring for G750 ( 2.8 mm Thick , 2.85 mm thk, 2.90 mm thk, 2.95 mm thk, 3.00 mm thk , 3.05 mm thk , 3.10 mm thk, 3.15 mm thk , 3.20 mm thk , 3.25 mm thick )for Tata BS VI 11 MTR & 12 MtrRequirement is any one of this hence rates shall be per each Snap ring(Please Refer Annexure - B For all parts numbers as there are multiple part nos.) |
| 147 | Synchro Ring (5th /6th Speed) for G750 and and Tata BS VI 11MTR & 12 MTR |
| 148 | Circlip5th speed( 2.50 mm Thick , 2.54 mm thk, 2.58 mm thk , 2.62 mm thk, 2.66 mm thk, 2.70 mm thk, 2.80 mm thickand 2.75 mm Thick) for G750Requirement is any one of this hence rates shall be per each circlip (Please Refer Annexure - B For all parts numbers as there are multiple part nos.) |
| 149 | Shifter Shaft (5th / 6thSpeed ) for G750 and Tata BS VI 11MTR & 12 MTR |
| 150 | Shifter DogFinger ( 5th/6th Speed) for G750 and Tata BS VI 11MTR & 12 MTR |
| 151 | Shifter Fork 5th/OD Speed( G900-OD) and Tata BS VI 11MTR & 12 MTR |
| 152 | Shifter Shaft (3rd /4thSpeed ) for G750 and Tata BS VI 11MTR & 12 MTR |
| 153 | Shifter Fork (1st / 2nd , 3rd / 4th Speed) for G750 |
| 154 | Shifter Shaft (1st /2ndSpeed ) for G750 and Tata BS VI 11MTR & 12 MTR |
| 155 | Shifter Dog ( 1st / 2ndSpeed) for G750 and Tata BS VI 11MTR & 12 MTR |
| 156 | Shifter Shaft ( Reverse) for G750 and Tata BS VI 11MTR & 12 MTR |
| 157 | Shifter Dog ( Reverse) for G750 |
| 158 | Shifter Fork ( Reverse) for G750 |
| 159 | Gear Case Cover Top ( Upper Cover) for G 750. |
| 160 | Selector & Shifter Shaft (RHD) for G 750 |
| 161 | Shifter Finger for G 750 |
| 162 | Compression Ring Outer |
| 163 | Compression Ring Inner |
| 164 | Cup |
| 165 | Spacer |
| 166 | Circlip E 12x1.3 |
| 167 | Side Cover for Tata BS VI 11MTR & 12 MTR |
| 168 | Selector and Shifter Lever(105R) |
| 169 | Front Cover –Upper ( for G750) suitable for 380 Dia Clutch |
| 170 | Shims ( 0.10 thick, 0.15 thk, 0.20 thick, 0.25 thick, 0.50 thick, 1.50 thick, 0.30 thick )Requirement is any one of this hence rates shall be per each Shim (Please Refer Annexure - B For all parts numbers as there are multiple part nos.) |
| 171 | Shims ( 0.05 thick, 0.125 thk, 0.25 thick, 0.50 thick )Requirement is any one of this hence rates shall be per each Shim(Please Refer Annexure - B For all parts numbers as there are multiple part nos.) |
| 172 | Integral Rear Cover cum Adaptor for G 750 |
| 173 | Speedo adaptor |
| 174 | Speedo Pinion |
| 175 | Magnetic Drain plug BS 1/2/3/4 and Tata BS VI CNG |
| 176 | Plug ( shifter Shaft rear)for Tata BS VI 11MTR & 12 MTR |
| 177 | Clutch Body 3rd Gear |
| 178 | Clutch Body 4th Gear |
| 179 | Engaging Gear (5,6) Thrust |
| 180 | Synchro Con (5,6 Karbon) |
| 181 | Shifter Sleeve (5,6) |
| 182 | Assy.Helical Gear (5th Speed) |
| 183 | EngagingGear (3rd ,4th ) |
| 184 | Assy.Helical Gear (2ndSpeed) |
| 185 | Roller |
| 186 | 3rd Speed Gear (Counter)227 |
| 187 | Selcter Shifter Shaft (RHD) |
| 188 | Shifter Lever |
| 189 | Gear Cage Cover Top (Upper) |
| 190 | Shifter Shaft (5th-6th) |
| 191 | Circlip(4 thSpeed) |
| 192 | Oil Slinger (Front Cover) |
| 193 | Oil Slinger (Rear Cover) |
| 194 | TURNING TUBE ASSY FOR TATA BS VI 11 MTR & 12 MTR |
| 195 | GEAR SHIFT LEVER ASSY WITH SHIFT YOKE FOR TATA BS VI 11 MTR & 12 MTR |
| 196 | SELECTOR - SHIFTER SHAFT FOR TATA BS VI 11 MTR & 12 MTR |
| 197 | DOWEL SLEEVE HEAVY 6X40 TS17616 SS8400 FOR TATA BS VI 11 MTR & 12 MTR |
| 198 | 2nd Gear Main Shaft G750 and TATA BS VI 11 MTR & 12 MTR |
| 199 | 4thGear Main Shaft G750 and TATA BS VI 11 MTR & 12 MTR |
| 200 | Reverse Gear Main Shaft for TATA BS VI 11 MTR & 12 MTR |
| 201 | C)GEAR AND GEAR COMPONENTS FOR TATA VEHICLES |
| 202 | Main Shaft for TATA BS VI 11 MTR & 12 MTR |
| 203 | 3rd Gear M/shaft G750 for TATA BS VI 11 MTR & 12 MTR |
| 204 | CIRCLIP (3.9 THK)CIRCLIP (3.6 THK)CIRCLIP (3.5 THK)CIRCLIP (3.4 THK)CIRCLIP (3.8 THK)CIRCLIP (3.7 THK)CIRCLIP (4.0 THK)CIRCLIP THK - 3.9 MMCIRCLIP THK - 4.0 MMCIRCLIP THK - 4.1 MMRequirement is any one of this hence rates shall be per each circlip(Please Refer Annexure - B For all parts numbers as there are multiple part nos.) |
| 205 | ENGAGING GEAR (1ST/2ND SPEED)TWIN CONE FOR TataBS VI 11 MTR, 12 MTR |
| 206 | COVER REAR UPPER (G750) FOR Tata BS VI 11 MTR &12 MTR |
| 207 | 3RD GEAR COUNTER SHAFT(23T) for Tat BS1/2/3/4 and Tata BS VI 11 MTR & 12 MTR |
| 208 | SWING LEVER SHIFTER FORK (1ST SPEED) FOR TATA BS VI CNG |
| 209 | ASSY SELECTOR FORK & SHAFT 1ST SPEED FOR TATA CNG BS VI |
| 210 | SELECTOR SHAFT FOR FIRST SPEED FOR TATA CNG BS VI |
| 211 | SELECTOR SHAFT (2/3) FOR TATA CNG BS VI |
| 212 | SELECTOR SHAFT (4/5) FOR TATA CNG BS VI |
| 213 | SELECTOR SHAFT (FOR REVERSE GEAR) FOR TATA CNG BS VI |
| 214 | SELECTOR & SHIFTER SHAFT FOR TATA CNG BS VI |
| 215 | DRIVE SHAFT FOR TATA CNG BS VI |
| 216 | COMPRESSION SPRING FOR TATA CNG BS VI |
| 217 | SNAP RING 2.68 MM THICKSNAP RING 2.73 MM THICKSNAP RING 2.78 MM THICKSNAP RING 2.83 MM THICKSNAP RING 2.88 MM THICKSNAP RING 2.93 MM THICKRequirement is any one of this hence rates shall be per each snap ring for Tata BS VI CNG(Please Refer Annexure - B For all parts numbers as there are multiple part nos.) |
| 218 | SPACER ON DRIVE SHAFT FOR Tata CNG BS VI |
| 219 | MAIN SHAFT -LONGER PILOT BRG BS1/2/3/4 and FOR Tata CNG BS VI |
| 220 | PRESSURE SPRING FOR Tata CNG BS VI |
| 221 | PIN ON MAIN SHAFT FOR Tata CNG BS VI |
| 222 | BUTTING RING 6.95 MM THICKBUTTING RING 7.00 MM THICKBUTTING RING 7.05 MM THICKBUTTING RING 7.15 MM THICKBUTTING RING 7.25 MM THICKBUTTING RING 7.30 MM THICKBUTTING RING 7.35 MM THICKBUTTING RING 7.40 MM THICKBUTTING RING 7.45 MM THICKBUTTING RING 7.50 MM THICKBUTTING RING 7.55 MM THICKBUTTING RING 7.60 MM THICKBUTTING RING 7.65 MM THICKBUTTING RING 7.70 MM THICKBUTTING RING 7.75 MM THICKBUTTING RING 7.80 MM THICKBUTTING RING 7.85 MM THICKBUTTING RING 7.90 MM THICKBUTTING RING 8.00 MM THICKRequirement is any one of this hence rates shall be per each BUTTING RING for Tata BS VI CNG (Please Refer Annexure - B For all parts numbers as there are multiple part nos.) |
| 223 | SYNCHRO SLEEVE 4/5TH SPEED BS1/2/3/4 FOR Tata CNG BS VI |
| 224 | REV. GEAR MAIN SHAFT 36T GBS40 BS1/2/3/4 FOR Tata CNG BS VI |
| 225 | SHIFTER SLEEVE 1ST SPEED BS1/2/3/4 FOR Tata CNG BS VI |
| 226 | COLLAR BUSHING (1ST GEAR WITH NEEDLE CAGE) for Tata BS VI CNG |
| 227 | 1ST SPEED GEAR - 38 T GBS40 BS2/3/4 FOR Tata CNG BS VI |
| 228 | COUNTER SHAFT W/O PTO PROV FOR Tata CNG BS VI |
| 229 | 2ND GEAR (T=17)COUNTER SHAFT FOR Tata CNG BS VI |
| 230 | 3RD GEAR (T=23)COUNTER SHAFT FOR Tata CNG BS VI |
| 231 | GEAR;4TH SPEED;COUNTER SHAFT FOR Tata CNG BS VI |
| 232 | CONSTANT MESH GEAR;COUNTER SHAFT FOR Tata CNG BS VI |
| 233 | CIRCLIP (LAYSHAFT) FOR Tata CNG BS VI |
| 234 | ASSY. REVERSE IDLER GEAR (EN36) FOR Tata CNG BS VI |
| 235 | BUSH REVERSE IDLER GEAR FOR Tata CNG BS VI |
| 236 | REVERSE IDLER GEAR SHAFT FOR Tata CNG BS VI |
| 237 | ASSY GEAR SHIFT LEVER KNOB FOR Tata CNG BS VI |
| 238 | GEAR SHIFT LEVER FOR Tata CNG BS VI |
| 239 | LINK ROD FOR CNG BS VI |
| 240 | D)GEAR AND GEAR COMPONENTS FOR Leyland VEHICLES |
| 241 | 3rd Speed Pinion ALGB 13 |
| 242 | 1st Speed Wheel ALGB13 |
| 243 | 2nd Speed Pinion ALGB13 |
| 244 | Main Shaft ALGB13 |
| 245 | 2nd Speed Wheel |
| 246 | Clutch & Pinion Shaft L/L Hino |
| 247 | M.S.4th Gear |
| 248 | Synchronizer Hub |
| 249 | SyncroCone / Clutch Body of ALGB78/52 &78/61For1611 &1812 BS IV |
| 250 | Syncro cone |
| 251 | Syncro cone/Clutch Body for Ley ALGB78/41 Gear Box for Euro III / ALGB78/52 &78/61 For 1611 &1812 / ALGB 93/43 For 2312 BS IV |
| 252 | Sliding Dog Clutch |
| 253 | SlidingDogClutch / Sliding Sleeve for Main Shaft Ley ALGB 78/41 Gear Boxfor Leyland Euro III/ Sliding Sleeve of ALGB 78/52 &78/61for 1611& 1812 BS IV |
| 254 | Input Shaft (Drive Shaft) |
| 255 | Reverse Gear ZF |
| 256 | Fixed Dog Clutch Rear |
| 257 | Sliding Dog Clutch |
| 258 | Sliding Dog Clutch |
| 259 | S/A of Syncro Pack 2nd/3rd |
| 260 | SynchroRing 3rd/4thALGB78/52 &78/61 For 1611 &1812 BS IV |
| 261 | 3rd Gear on Main Shaft |
| 262 | 4th Gear on Main Shaft |
| 263 | S/A of Syncro Pack |
| 264 | Syncro Cone/ Clutch Body for Ley ALGB78/41 Gear Box for Euro II |
| 265 | Syncro Cone MK 2/ Clutch Body for Ley ALGB78/41 Gear Box for Euro III / ALGB78/52 &78/61 For 1611 &1812 BS IV |
| 266 | Syncro Cone/Synchro Body for Ley ALGB78/41 Gear Box for Euro III / ALGB78/52 &78/61 For 1611 &1812 BS IV |
| 267 | Input Shaft |
| 268 | Main Shaft |
| 269 | Connecting Rod fort Selector Fork for Ley ALGB78/41, Gear Box for Leyland Euro III F 2437614 / ConnectingRodof ALGB 78/52 &78/61for 1611& 1812 BS IV / Connecting Rod ofALGB 93/43 for 2312 BS IV |
| 270 | Selector Plate for Selector Fork for Ley ALGB78/41, Gear Box for Leyland Euro III / Selector Plate of of ALGB 78/52 &78/61for 1611& 1812 BS IV |
| 271 | Locking Piece for Selector Housing Ley ALGB78/41, Gear Box for Leyland Euro III |
| 272 | Thrust Washer Std |
| 273 | Sleeve |
| 274 | Plunger |
| 275 | Sleeve |
| 276 | Ball Joint RH |
| 277 | Ball Joint RH |
| 278 | Long Change Speed Lever |
| 279 | Gear Selector Kit. |
| 280 | Piller Elbow |
| 281 | Selector Housing |
| 282 | Outer Lever |
| 283 | Selector Lever |
| 284 | Gear Change Shaft |
| 285 | Pinion CouplingFlange |
| 286 | Locking Ring |
| 287 | Sleeve for Main Shaft Ley ALGB 78/41 Gr. Box for Leyland Euro III |
| 288 | Sliding Sleeve for Main Shaft Ley ALGB 78/41 G Box for LL Euro III |
| 289 | Output Flange for Main Shaft Ley ALGB 78/41 G Box for LL Euro III |
| 290 | Extended Outer Lever without Machining Pitch 55 mm for Selector Housing for Ley ALGB 78/41 Gear Boxfor LL Euro III / ALGB78/52 &78/61 For 1611 &1812 BS IV |
| 291 | Gear Joint Assy. for Ley ALGB 78/41 Gear Boxfor LL Euro III |
| 292 | Input Shaft of ALGB 78/52 for 1611 BS IV |
| 293 | Synchronizer Ring of ALGB 78/52 &78/61 for 1611&1812 BS IV |
| 294 | Sleeve of ALGB 78/52 78/61 &93/43 for 1611,1812,4/251 & 2312 BS IV |
| 295 | Synchrobody For 5 th & 6 th Gear of ALGB 78/52 &78/61 for 1611&1812 BS IV |
| 296 | Sliding Sleeve of ALGB 78/52 &78/61 for 1611&1812 BS IV |
| 297 | OD Gear on main shaft of ALGB 78/52 &78/61 for 1611 &1812 BS IV |
| 298 | Sleeve of ALGB 78/52 &78/61 for 1611 &1812 BS IV |
| 299 | Gear on Main Shaft4th GearofALGB 78/52 &78/61for 1611& 1812BS IV |
| 300 | SecondGear on mainshaft of ALGB 78/52 &78/61for 1611& 1812 BS IV |
| 301 | SynchroRing of for 1611 & 1812 BS IV / 2312 BS IV & 4/251 BS IV |
| 302 | SynchroRing of ALGB 78/52 &78/61for 1611& 1812 BS IV / Syncho Ring ofALGB 93/43 for 2312 BS IVand Sunchro Body 3rd/4th 4/251 BS IV |
| 303 | SlidingSleeve of ALGB 78/52 &78/61for 1611& 1812 BS IV & 4/25 BS IV |
| 304 | First Gear on Main Shaftof ALGB 78/52 &78/61for 1611& 1812 BS IV |
| 305 | Reverse Clutch Bodyof of ALGB 78/52 &78/61for 1611& 1812 BS IV |
| 306 | Reverse Gear on Main shaftof ALGB 78/52 &78/61for 1611& 1812 BS IV |
| 307 | Pulsediscfor Electronic Speedoofspeedo of ALGB 78/52 &78/61for 1611& 1812 BS IV / Pulse Disc for Electronic Speedo ofALGB 93/43 for 2312BS IV |
| 308 | 3 rd Gear on main Shaft of ALGB 78/52 &78/61for 1611& 1812 BS IV |
| 309 | Main Shaft of ALGB 78/52 &78/61for 1611& 1812 BS IV |
| 310 | Reverse ldlerGearof ALGB 78/52 &78/61for 1611& 1812 BS IV / Reverse ldlerGearof ALSG349 for 1812BS IV / Reverse ldier Gear ofALGB 93/43 for 2312 BS IV & 4/251 BS IV |
| 311 | Reverse ldlerShaft of ALGB 78/52 &78/61for 1611& 1812BS IV / Reverse ldlerShaft of ALSG349 for 1812 BS IV / Reverse ldier Shaft ofALGB 93/43 for 2312 BS IV & 4/251 BS IV |
| 312 | SlidingSleeve of ALGB 78/52 &78/61for 1611& 1812 BS IV & 4/25 BS IV |
| 313 | Gear on layShaft 5 th of ALGB 78/52 &78/61for 1611& 1812 BS IV |
| 314 | 4th Gear on Lay Shaft of ALGB 78/52 &78/61for 1611& 1812 BS IV |
| 315 | 3rd Gear on Lay Shaft of ALGB 78/52 &78/61for 1611& 1812BS IV |
| 316 | Lay Shaftof ALGB 78/52 &78/61for 1611& 1812 BS IV |
| 317 | S/A of Selector Fork of ALGB 78/52 1611 BS IV |
| 318 | S/A of Selector Fork of ALGB 78/52 1611 BS IV |
| 319 | S/A of Selector Fork of ALGB 78/52 1611 BS IV |
| 320 | Selector for ALGB 78/61 1812 BS IV |
| 321 | Selector for ALGB 78/61 1812 BS IV |
| 322 | Gear ShiftFork for ALGB 78/61 for 1812 BS IV |
| 323 | OD SelectorPlateof ALGB 78/52 &78/61for 1611& 1812BS IV |
| 324 | Reverse Selector Shaft of ALGB 78/52 &78/61for 1611& 1812 BS IV / Reverse Selector Shaft ofALGB 93/43 for 2312 BS IV |
| 325 | Reverse Selector Shaft of ALGB 78/52 &78/61for 1611& 1812 BS IV / Reverse Selector Fork ofALGB 93/43 for 2312 BS IV |
| 326 | DetentPlungerof ALGB 78/61 for 1812 BS IV |
| 327 | SelectorShaftof of ALGB 78/52 &78/61for 1611& 1812 BS IV / Selector Shaft ofALGB 93/43 for 2312 BS IV |
| 328 | Sleeve of ALGB 78/52 &78/61for 1611& 1812 BS IV / Sleeve of ALGB 93/43 for 2312 BS IV |
| 329 | GearChangeFigureof ALGB 78/52 &78/61for 1611& 1812 BS IV / Gaer Change Finger of ALGB 93/43 for 2312 BS IV |
| 330 | Selector Arm of ALGB 78/52 &78/61for 1611& 1812 BS IV |
| 331 | S/A of ConnectingFlange of ALGB 78/52 &78/61for 1611& 1812 BS IV |
| 332 | S/Aof Detent Plungerof ALGB 78/52 For 1611 BS IV |
| 333 | Sector Shaft Assy.of Rane Steering Box for 1611BS IV |
| 334 | Sector Shaft Assy. Of ZF SteeringBox for 1611 BS IV |
| 335 | Gear ldler of Timing Gear For 1611,1812 & 2312 BS IV |
| 336 | Ldler Gear Shaftof Timing Gear for 1812 & 2312 BS IV |
| 337 | Sector Shaft forSteering GearADJ06400-ALSG 349 for 1812 &2312 BS IV |
| 338 | BevelGearofALSG 349 for 1812 & 2312 BS IV |
| 339 | Shaftof ALSG 349 for 1812 &2312 BS IV |
| 340 | E)GEAR AND GEAR COMPONENTS FOR Leyland VEHICLES |
| 341 | Sleeve of ALGB 78/52 For 1611 BS IV / Sleeve ofALGB 93/43 for 2312 BS IV & 4/251 BS IV |
| 342 | Sleeve of ALGB 93/43 For 2312 & 4/251 BS IV |
| 343 | Synchro Body 5th /6th Gear of ALGB 93/43 for 2312 &4/251 BS IV |
| 344 | Sliding Sleeve of ALGB 93/43 for 2312 &4/251 BS IV |
| 345 | Clutch Body of ALGB 93/43 for 2312 BS IV and 4/251 BS IV |
| 346 | Gear Main ShaftOD of ALGB 93/43 for 2312 & 4/251 BS IV |
| 347 | 4th Gear on Main Shaft ofALGB 93/43 for 2312 & 4/251 BS IV |
| 348 | 4th Gear Clutch Body ofALGB 93/43 for 2312 & 4/251 BS IV |
| 349 | Synchro Body 3rd /4th of ALGB 93/43 for 2312 & 4/251 BS IV |
| 350 | Sliding Sleeve of ALGB 93/43 for 2312 & 4/251 BS IV |
| 351 | Synchro Ring 3rd /4th for 2312 & 4/251 BS IV |
| 352 | Cultch Body 3rd &4th Synchro for 2312 & 4/251 BS IV |
| 353 | 3rd Gear on Main Shaft for 2312 & 4/251 BS IV |
| 354 | Main Shaft for 2312 & 4/251 BS IV |
| 355 | 2nd Gear on Main Shaft for 2312 & 4/251 BS IV |
| 356 | 1st Gear on Main Shaft for 2312 BS IV & 4/251 BS IV |
| 357 | 1st Gear on Main Shaft for 2312 BS IV & 4/251 BS IV |
| 358 | Clutch Body ReverseGear ofALGB 93/43 for 2312 BS IV & 4/251 BS IV |
| 359 | Reverse Gear On Main Shaft ofALGB 93/43 for 2312 BS IV & 4/251 BS IV |
| 360 | ConstantMesh Gear on Lay Shaft ofALGB 93/43 for 2312BS IV 7 4/251 BS IV |
| 361 | OD Gear on Lay Shaft ofALGB 93/43 for 2312 BS IV & 4/251 BS IV |
| 362 | 4th Gear Lay Shaft ofALGB 93/43 for 2312 BS IV & 4/251 BS IV |
| 363 | 3rd Gear on Lay Shaft ofALGB 93/43 for 2312 BS IV & 4/251 BS IV |
| 364 | Lay shaft ofALGB 93/43 for 2312 BS IV & 4/251 BS IV |
| 365 | Selector Plate 5th &6th ofALGB 93/43 for 2312 BS IV |
| 366 | SelectorPlate 3rd &4th ofALGB 93/43 for 2312 BS IV |
| 367 | Selector Fork ofALGB 93/43 for 2312 BS IV |
| 368 | Selector Fork ofALGB 93/43 for 2312 BS IV |
| 369 | Selector Fork ofALGB 93/43 for 2312 BS IV |
| 370 | DRAIN PLUG -MAGNETIC M24 X 1.5 FOR LEY 4/251 BS IV |
| 371 | SPLIT RING - 3.7SPLIT RING - 3.6SPLIT RING - 3.5SPLIT RING FOR LEY 4/251 BS IVRequirement is any one of this hence rates shall be per each SPLITRING |
| 372 | SNAP RING A=1.20SNAP RING A=1.30SNAP RING A=1.35SNAP RING A=1.40SNAP RING A=1.50SNAP RING A=1.60SNAP RING A=1.70FOR LEY 4/251 BS IVRequirement is any one of this hence rates shall be per each SNAP RING |
| 373 | CIRCLIP FOR LEY 4/251 BS IV |
| 374 | INPUT SHAFT FOR LEY 4/251 BS IV |
| 375 | CIRCLIP FOR LEY 4/251 BS IV |
| 376 | SPECIAL CIRCLIP - EXTERNAL - 40 X 2.5SPECIAL CIRCLIP - EXTERNAL - 40 X 2.45SPECIAL CIRCLIP - EXTERNAL - 40 X 2.4SPECIAL CIRCLIP - EXTERNAL - 40 X 2.35SPECIAL CIRCLIP - EXTERNAL - 40 X 2.3SPECIAL CIRCLIP - EXTERNAL - 40 X 2.2FOR LEY 4/251 BS IVRequirement is any one of this hence rates shall be per each SPECIAL CIRCLIP |
| 377 | S/A of Synchro pack 5th /6thfor Leyland 4/251 BS IV |
| 378 | SPRING FOR LEY 4/251 BS IV |
| 379 | PRESSURE PIECE FOR LEY 4/251 BS IV |
| 380 | RETAINING RING FOR LEY 4/251 BS IV |
| 381 | RETAINING RING 60X2.5RETAINING RING 60X2.2RETAINING RING 60X2.3RETAINING RING 60X2.4FOR LEY 4/251 BS IVRequirement is any one of this hence rates shall be per each RETAINING RING |
| 382 | S/A OF SYNCHROPACK 3RD / 4TH FOR LEY 4/251 BS IV |
| 383 | S/A OF SYNCHRO PACK 1ST & 2ND FOR LEY 4/251 BS IV |
| 384 | SPRING FOR LEY 4/251 BS IV |
| 385 | PRESSURE PIECE FOR LEY 4/251 BS IV |
| 386 | SPECIAL CIRCLIP - EXTERNAL - 68 X 4SPECIAL CIRCLIP - EXTERNAL - 68 X 3.95SPECIAL CIRCLIP - EXTERNAL - 68 X 3.9SPECIAL CIRCLIP - EXTERNAL - 68 X 3.85SPECIAL CIRCLIP - EXTERNAL - 68 X 3.8FOR LEY 4/251 BS IVRequirement is any one of this hence rates shall be per each SPECIAL CIRCLIP |
| 387 | SPECIAL CIRCLIP - INTERNAL - 100 X 3SPECIAL CIRCLIP - INTERNAL - 100 X 2.9SPECIAL CIRCLIP - INTERNAL - 100 X 2.8SPECIAL CIRCLIP - INTERNAL - 100 X 2.7SPECIAL CIRCLIP - INTERNAL - 100 X 2.6FOR LEY 4/251 BS IVRequirement is any one of this hence rates shall be per each SPECIAL CIRCLIP |
| 388 | LOCK PLATE For Leyland 4/251 BS IV |
| 389 | SPACER RING2.20mmTHKSPACER RING 2MM THICKSPACER RING 1.75MM THICKSPACER RING 1.7MM THICKSPACER RING 1.65MM THICKSPACER RING 1.6MM THICKSPACER RING 1.55MM THICKSPACER RING 1.5MM THICKSPACER RING 1.45MM THICKSPACER RING 1.4MM THICKSPACER RING 1.35MM THICKFOR LEY 4/251 BS IVRequirement is any one of this hence rates shall be per each SPACER RING(Please Refer Annexure - B For all parts numbers as there are multiple part nos.) |
| 390 | SPECIAL CIRCLIP - EXTERNAL - 40 X 1.75SPECIAL CIRCLIP - EXTERNAL - 40 X 1.7SPECIAL CIRCLIP - EXTERNAL - 40 X 1.65SPECIAL CIRCLIP - EXTERNAL - 40 X 1.6SPECIAL CIRCLIP - EXTERNAL - 40 X 1.55SPECIAL CIRCLIP - EXTERNAL - 40 X 1.5SPECIAL CIRCLIP - EXTERNAL - 40 X 1.4SPECIAL CIRCLIP - EXTERNAL - 40 X 1.45SPECIAL CIRCLIP - EXTERNAL - 40 X 1.35SPECIAL CIRCLIP - EXTERNAL - 40 X 1.3(Please Refer Annexure - B For all parts numbers as there are multiple part nos.) |
| 391 | F)GEAR AND GEAR COMPONENTS FOR EICHER VEHICLES |
| 392 | Gear Reverse Idler |
| 393 | Reverse Gear Main Shaft |
| 394 | Counter Shaft Assy consist of ID 315588 & ID 313952 |
| 395 | 6th Gear Counter Shaft (OD Gear) 6.71 Ratio |
| 396 | Counter Shaft ET 70S6 |
| 397 | 6th Gear Assy (OD) ET70S6 |
| 398 | 1st Gear Main Shaft |
| 399 | 2nd Gear Main Shaft |
| 400 | 3rd Gear Main Shaft ET70S6 |
| 401 | 4th Gear Main Shaft ET70S6(8.38 Ratio) |
| 402 | Main Shaft ET70S6 |
| 403 | DP assy 6th GMS (DD) 7.33 |
| 404 | Fork Wear Pad |
| 405 | Fork Gear Shift 1st-2nd |
| 406 | Rail Gear Shaft Rev |
| 407 | Jaw Gear Shift |
| 408 | Reverse Jaw ET70S6 |
| 409 | Fork, 2nd & 3rd Gear Shaft E |
| 410 | Rail 1st Rev |
| 411 | Rail 5th- 6th |
| 412 | Jaw Gear Shift |
| 413 | Case Lower Housing ET70S6 |
| 414 | Fork Rev ET70S6 |
| 415 | Rail 3rd/ 4th |
| 416 | Plate Rail Holding I |
| 417 | Plate Holding III ET70S6 |
| 418 | Plate Rail Holding II |
| 419 | OD Fork Assy –ET70S6 |
| 420 | Case Upper Blocker |
| 421 | Circlip |
| 422 | Shift Finger |
| 423 | Cover Case Upper |
| 424 | Lever, Cross Shaft SRGSL E |
| 425 | End Cover assy. |
| 426 | Assy Case Upper ET40S6 |
| 427 | Cross Shaft ET70S6 SRGSL |
| 428 | Circlip Dia 55 |
| 429 | O Ring Idler |
| 430 | Thrust Washer III-IV Gear |
| 431 | Washer Rev Idler Gear |
| 432 | Shaft Rev Gear Idler ET70S |
| 433 | Bearing Sleeve 4th GMS-6 |
| 434 | Thrust washer 2nd Gear |
| 435 | O Ring |
| 436 | Washer 4th/5th Hub Lock |
| 437 | Circlip Dia 45 |
| 438 | Flange Companion |
| 439 | Thrust Washer Reverse Gear |
| 440 | Synchro Cone (30.25) ( To be served in set) |
| 441 | Bearing Sleeve 2nd Gear |
| 442 | Syncro Assy 2nd/3rd |
| 443 | Assy 4th 5th Syncro |
| 444 | Synchronizer Assy 1st/2nd |
| 445 | Circlip Dia 30 |
| 446 | Sleeve Synchronizer |
