Tender For Provision Of Improvement To Security Infrastructure At 3 Afsr Under Ge (Af) Borjhar
Tender Value
24.31 Lakhs
Estimated cost
Bid Submission
06 Jun 2024
0 days left
EMD
48620
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
borjhar → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Provision Of Improvement To Security Infrastructure At 3 Afsr Under Ge (Af) Borjhar
BOQ
| Sl. No. | Item Description |
| 1 | M&L for Earth work in excavation by mechanical means (Hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, complete all as specified and as directed. |
| 2 | Returning, filling in, including spreading, levelling, watering and well ramming, in trenches with excavated soil in layers not exc.25cm thick complete all as specified and directed. (B/R - 87.81 + E/M - 15.43) |
| 3 | M&L plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation ,filling and mass concrete etc complete all as specified and directed. |
| 4 | Labour only for spreading and levelling in layers n exc 25 cm thick filling under floors including well ramming, watering and consolidation complete all as specified and directed. |
| 5 | M&L Sand filling under floors or in foundation including watering and consolidation complete all as specified and directed. |
| 6 | M&L plain cement concrete (1:3:6) type C-2(using 40 mm graded stone aggregated), 75 mm thick as in plinth protection complete all as specified and directed. |
| 7 | M&L for 40 mm thick cement concrete 1:2:4 type B-0 as in Damp proof course to horizontal or vertical surfaces including necessary formwork complete all as specified and as directed. |
| 8 | M&L brick work with old size bricks,straight or curve on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 9 | M&L brick work with old sizebricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 as in half brick wall including placing TMT bars at every 4th course complete all as specified and directed. |
| 10 | M&L RCC M25 grade (Design mix) using 20mm graded stone aggregate as in roof beam & lintel band complete all as specified and directed. |
| 11 | M&L RCC M25 grade (Design mix) using 20mm graded stone aggregate as in roof slab complete all as specified and directed. |
| 12 | M&LRCC M25 grade (Design mix) (with 20 mm graded stone aggregate) as in foundation, footing & plinth beam etc complete all as specified and directed. |
| 13 | M & L RCC M25 grade (Design mix)(with 20 mm graded stone aggregate) as in columncomplete all as specified and directed. |
| 14 | M&L RCC M25 grade (Design mix) using 20mm graded stone aggregate as in chajja/ shelf complete all as specified and directed. |
| 15 | Form work to sides of concrete foundations, footing, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter rough finished surfaces of concrete square/ rectangular/ polycon surface complete all as specified and directed. |
| 16 | Formwork of sides of pillers, struts, piers, column surface of concrete etc of Rough finished square, rectangular or polygonal surface complete all as specified and directed. |
| 17 | Form work to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work, not exceeding 200 mm thick (Horizontal or sloping) of flat surfaces of concrete complete all as specified and directed. |
| 18 | Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports overhangs etc also splays between floor & beams etc, flat finished surfaces complete all as specified and directed. |
| 19 | M&L, 10mm dia and aboveTMT bar cut to length bent to shape reqd, incl cranking bendingspirally for hooping for column, hooking end etc complete & binding with and including MS wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 20 | All as per serial item No 19.00 here-in above but TMT bar 5mm dia andincluding 10 mm dia as in stirrups, spacers and binder complete all as specified and directed. |
| 21 | M & L for rendering 5mm thick on concrete ceiling surfaces in cement mortar 1:3finished surfaces fair and even complete all as specified and directed. |
| 22 | M & L rendering 10mm thick on fair faces of brick or concrete wall surfaces in cement mortar 1:6finished surfaces fair and even complete all as specified and directed. |
| 23 | M & L rendering 15mm thick on fair faces of brick or concrete wall surfaces in cement mortar 1:4finished surfacesfair & even using WPC (Water Proofing Compound) as per manufacturers instructions complete all as specified and directed.Note : WPC measured and paid separetly. |
| 24 | Supply only Integral waterproofing compound complete all as specified and directed. |
| 25 | M&L three coats of white wash to newly plastered surface of ceiling incl preparation of surfaces complete all as specified and directed. |
| 26 | M&L for complete removal of existing treatment of old wall surface and applying two coats of oil bound distemper over a coat of alkali resistant primer applied over 2mm to 3mm thick BIRLA/JK water proof wall care putty complete all as directed by Engr-in-charge. |
| 27 | M&L for preparation of newly plastered wall surfaces and applying two coats of Oil Bound Distemper over a coat of chalk whiting (preparatory to distemper) applied over 1 to 2 mm thick BIRLA/ JK (or equivalent) water-proof wall care putty complete all as specified and directed by Engineer -in-Charge. |
| 28 | M&L three coats of white wash on Internal new plastered surface including preparation of new surface complete all as specified and directed. |
| 29 | Material & Labour for Preparing new plastered or unplastered surfaces and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed. |
| 30 | M&L for 40 mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in concrete floor finishing complete all as specified and as directed. |
| 31 | M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in concrete floor finishing complete all as specified and as directed. |
| 32 | M&L for colured Virified Ceramic tiles 8mm to 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed or bedding layer in cement mortar (1:4) complete all as specified and as directed. |
| 33 | M&L colouredNon-skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. premium quality, Gr-1 setand jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15 mm thick screed bed or bedding layers in cement mortar (1:4) complete all as specified and directed. |
| 34 | M&L colouredNon-skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.36 Sqm, in floors etc. premium quality setand jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15 mm thick screed bed or bedding layers in cement mortar (1:4) complete all as specified and directed. |
| 35 | M&L colourglazed ceramic coloured tiles 350mmx250mmx7mm/ 450x350x7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement as in vertical surfaces such as skirting, dados and risers to steps etc to match with and including 10 mm thick screed bed or bedding layers in cement mortar (1:3)complete all as specified and directed. |
| 36 | S&F Vitreous China wash down water closet pan (pedestal pattern),white (excluding flushing cistern and pipe) complete all as specified and directed. |
| 37 | S&F PVC valveless, syphonic action type low level flushing cistern, white, 10 ltrs capacity, including all fittings and flush pipe, PVC connection pipe, inlet ball valve, float and handle including brackets complete all as specified and directed. |
| 38 | S&Fover head shower brass CP 125mm dia round shape sigle flow with nessary extension pipe from wall complete all as specified and directed. |
| 39 | S&F vitreous china counter top wash basin, white, flat back, size 550 mm x 400mm including all fittings including cutting for andpinning in ends of brackets or erecting stand etc with CP waste coupling of 32mm bore, PVC waste pipe of 32 mm dia cast iron bracket & 15 mm bore PVC connection pipe of 450 mm long complete all as specified and directed. (Note : Waste coupling 32mm bore CP, 32mm bore PVC waste pipe & PVC connector pipe etc shall be deemed to be included in the quoted rate) |
| 40 | S&F 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thck AC board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 41 | S&F chromium platedBib taps 15mm bore cast copper alloy chromium plated, fancy type with crutch or butter fly handles screwed down for iron pipe or for brass ferrule complete all as specified and directed. |
| 42 | S&F chromium plated two way Bib tap 15mm bore cast copper alloy chromium plated, fancy type with crutch or butter fly handles screwed down for iron pipe or for brass ferrule complete all as specified and directed. |
| 43 | S&Fstop valves/ angle cock 15 mm bore cast copper alloy, chromium plated, fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and directed. |
| 44 | S&F PVC connection pipe 15 mm dia with PTMT nuts of length 450 mm, complete all as specified and as directed. |
| 45 | S&Fstop valves(concealed) 15 mm bore cast copper alloy, chromium plated, fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and directed. |
| 46 | S&F soap dish,vitreous china white ,approximate size 160x160x90 mm fixed with CP screw complete all as specified and directed. |
| 47 | S & F Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) |
| 48 | S&F 15mm bore pillar taps cast copper alloy,with capstan heads,chromium plated,screwed down, fancy type high pressure, with or without lettered \"HOT or COLD\" with long screwed sunk and fly nuts complete all as specified and directed. |
| 49 | S & F for 75 mm PVC (SWR) floor trap, with SS grating (with/ without hole for waste pipe) including jointing with solvent cementn complete all as specied and directed by Engr-In-Charge. |
| 50 | S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints and fixed on wall as in waste/soil pipe complete all as specified and directed |
| 51 | S&F 75 mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints and laid in trenches or in floor as in waste/soil pipe complete all as specified and directed |
| 52 | S&F 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed |
| 53 | S&F 110mm bore PVC (SWR) junction single Tee equal or unequal complete all as specified and directed |
| 54 | S & F 500 litres capacity rotational moulded polyethylene water storage tanks with lids (multi layer minimum 3 layered) (Cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed. |
| 55 | S & F 20mm bore ballbrass valve high pressurewith polythene float and flynut complete, screwed for ironpipe or brass ferrule and fixed complete. |
| 56 | S&F of 20 mm outer dia CPVC pipe SDR 11 & plain CPVC SDR 11 fittings on wall/ ceiling or laying in floors complete all as specified and as directed. |
| 57 | S&F of 16 mm outer dia CPVC pipe SDR 11 & plain CPVC SDR 11 fittings on wall/ ceiling or laying in floors complete all as specified and as directed. |
| 58 | Cutting chases for concealed water tubing or concealed conduit wiring pipe where making good to facing required and pointing in cement mortar 1:3 etc. in Brickwand and concrete. Walls & cutting not exceeding 10 cm girth complete all as specified and directed. |
| 59 | S&F 20 mm bore gun metal ,globe or gate valve,with iron wheel head screwed both ends for iron pipe complete all as specified and directed. |
| 60 | S&F 110mm bore PVC(SWR) vent cowl complete all as specified and directed. |
| 61 | M&L applying water proofing treatment with the following complete all as specified & directed :-(a)First coat of hot blown bitumen with bitumen 85/25 grade @1.20 Kg/Sqm over bitumen primer @0.3 litre/Sqm.(b)Second layer of APP based polymeric membrane minimum weight 3.5 Kg/Sqm and minimum 3.0mm thick reinforced with polyster non woven fabric (wt not less than 160 gms/Sqm) laid on primed surface by torched application.(c)Third layer i.e. a coat of hot blown bitumen 85/25 @ 1.2 Kg/Sqm shall be applied over water proofing membrane and (d)Finally finished with a coat of bituminous aluminium paint @ 0.10 Kg/Sqm. |
| 62 | M&L rendering 10mm thick cement mortar 1:4 on concrete surfaces as in roof treatmentusing WPC @3% by weight even & smooth without using extra cement complete all as specified and directed. (NOTE: WPC measured and paid separetly) |
| 63 | M&L powdered coated anodised aluminium frame for doors ( with one or more rebates including joining cleat for fixing etc. (minimum thickness of powder coating 50 micron) complete all as specified and directed. |
| 64 | S&F Powder coated aluminium section (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge |
| 65 | M&L powdered coated anodised aluminium frame of section 91.80x31.75 mmx1.5 mm thick (Jindal Section No 20832 or equivalent section) having three trackforwindows/ ventilators with one or more rebates including joining cleat for fixing etc.(minimum thickness of powder coating 50 micron) complete all as specified and directed. |
| 66 | S&F powder coated anodised aluminium sliding type glazed window, shutter fixed open track with members of window shutters of section 39.40x17.70x1.2mmand other standard Bombay sliding section but not less than 0.51Kg/RM incl all necessary fiber wheel rollers sutiable handle to facilitate sliding and all necessary jionting cleats, glazing clip,rubber packing,Aluminium snap beeding etc all as specified and directed .(Note: Glass and wire mesh shall be measured and paid separately) |
| 67 | M&L in repairs for Anodized aluminium DECO grill, made of 5-6mm dia aluminium bars, of DG 104 or equivalent category , fixed with aluminium frame using suitable aluminium U cannel with screwfor aluminium window complete all as specified and as directed. |
| 68 | Supply & fixing5.5 thick sheetglass, odinary quality in square n exc 0.5m in each pane complete all as specified and directed. |
| 69 | Supply & fixing5.5 thick sheetglass, odinary quality in square but exc 0.5m in each pane complete all as specified and directed. |
| 70 | S&F stainless steel wire cloth of 0.36mmnominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples as directed by Engr-in-Charge. |
| 71 | S & F in repair door closer Aluminium (Die cast) body Hydraulically regulated (designation No. 3) universal type, suitable for door shutters of 851 to 1000 mm in width and weight between 61 to 80 kg complete all as specified and directed. |
| 72 | S&F factory made solid PVC door frame of size50 mm x 47 mm made out of 5 mm thick plain colour PVC sheetreinforced with mild steel square tube in opening as per specification and drawing complete all as specified and directed. |
| 73 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails, MS frames shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, Paneling of plain colour PVC sheet to be fitted in the MS frame welded/ scaled to the stiles and rails with suitable PVC Sheet beading and jointed together with solvent cement as per drawings and specifications complete all as specified and directed. |
| 74 | S & F for Aluminium Mortice lock, vertical type of size 75 mm, 4 lever, complete all as specified and as directed by Engineer-in-Charge. |
| 75 | S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete. |
| 76 | S&F aluminium handle150 mm long extruded section complete all as specified and directed. |
| 77 | S&F aluminium barrel tower bolt, 150 mm long, extruded section complete all as specified anddirected. |
| 78 | S&F cold rolled mild steel butt hinges 100 mm long, medium weight complete all as specified and directed. |
| 79 | S&F 18 to 20 mmthick granite slab, machine cut, laid over screed bed, beddedand jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite including cutting and polishingtypes with and including15 mm thick screed bed in cement mortar (1:6) complete all as specified and directed. |
| 80 | M&L for Machine cut kota stone slab of thickness 20-25m, laid in flooring over 20 mm thick screed bed of CM 1:4 with pigment to match the shade of the slab including rubbing and polishing completeall as specified and as directed. |
| 81 | M&L for Machine cut kota stone slab of thickness 20-25mm, laid over 20 mm thick screed bed of CM 1:4 as in riser of steps, skirting, dado laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing completeall as specified and as directed. |
| 82 | M&L Hardcore of gauge n exc 63 mm of brocken stone or boulders deposited. Spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface complete all as specified and as directed. |
| 83 | Dismantling of Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets all as specified |
| 84 | M&L False ceiling with \"E\" board \"Classic\" , reinforced, designer series, board with HPSC of size 600 mm x 600 mm x 4 mm thick fixed on anodised aluminium snap grid to support the boards/files with aluminium anodised main \"T\" section 36mm x 25mm x 1.40mm cross tee 23.50mm x 23.50mm x 1.40mm thick and aluminium angle 25mm x 25mm x 1.40mm as on edges/sides including hanging arrangements complete all as specified and as directed |
| 85 | Dismantling of plain or corrugated steel sheeting any gauge or any thickness in roof covering including stacking serviceable materials of re-use and removing unserviceable materials. |
| 86 | S & F pre-painted color galvalume aluminium zinc coating GI based corrugated steel 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified. |
| 87 | S & Fpre-painted color galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, ridges , valley gutter etcfixed with self tapping screws as specified. |
| 88 | M&L for Second class hard-wood timber famed and fixed as in scantlings complete all as specified and as directed. |
| 89 | Excavation in trenches not exc 1.5 m wide and not exc 1.5 m depth for foundation, etc, not exc 10 sqm on plan and n exc 1.5 m depth and getting out in soft/loose soil complete all as specified and as directed.(B/R - 35 + E/M - 22.95) |
| 90 | Removing excavated material (soils) exc 250 m but not exc 500 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and as directed. (B/R - 5 + E/M - 23) |
| 91 | Concrete bed to drain pipes of size 150 mm bore packingunder and haunching against the sides of pipes after theyare laid and fitted in cement concrete, Type C2, 1:3:6,using 40mm graded stone aggregate complete all asspecified and as directed. |
| 92 | M&L brick work with old size bricks,straight or curve on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 93 | PCC 1:2:4, Type B–0, using 12.5 mm graded stone aggregate as in coping including use and waste of formwork and finishing the exposed faces of concrete evenand smooth without using extra cement complete all asspecified and as directed. |
| 94 | PCC 1:2:4 type B2 (using 40mm graded stone aggregateas in surface channels/benching and drains complete allas specified and directed. |
| 95 | Rendering 15 mm thick in CM 1:4 on fair faces of brick/concrete wall surfaces of any description using WPC and finishing surfaces even and smooth without using extra cement complete all as specified and directed. (Note:WPC shall be measured and paid separately under respective items in this schedule) |
| 96 | Supply only integral water proofing compound [ISI marked] of approved make. |
| 97 | Precast RCC 1:2:4, Type B–1 using 20mm graded stone aggregate as in landings, cover slabs [for manholes etc],chullah hoods, Chajjas, water troughs, mangers, Shelvesand similar articles with plain faces including formwork,set in cement mortar 1:4 complete all as specified and as directed. |
| 98 | Reinforcement using High Strength Corrosion ResistantDeformed TMT Bars of Grade Fe–500D of 5mm dia and over up to 10mm dia, required in stirrups, spacers &binders, cut to length, bent to shape required, bindingwith & including mild steel wire (annealed) not less than0.9mm dia or securing with clips quality complete all as specified. |
| 99 | M&L for 150mm dia Salt-glazed stoneware drain pipes, class A, laid in trenches andpointed complete all as specified and directed. |
| 100 | Cutting into existing manholes for connecting new drains of Internal dia of pipe in 150 mm , making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required |
| 101 | E/M Portion |
| 102 | M&L for wiring with 1.5 Sqmm FR PVC insulated and sheathed multi stranded (FRLSH) flexible copper conductor cable inand incl rigid PVC conduit concealed/PVC surface conduit with sunk cast iron/pressed steel terminal boxes ofadequate size with suitable thickness hylum laminated sheet , coverofadequate size for one light or one fancontrolledby one switch incl 1.5 Sqmm (FRLSH) PVC insulated andunsheathed multi stranded flexible copper conductor cable as earth wire(green colour) to common earth dolly complete all as specified and directed by Engr-in-charge. Note: a) Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc(b) On RCC roof ceiling PVC conduit shall be provided on surfaces for fan etc with proper fixing clips all as directed. (c) Rate for Cutting, chieseling and making good the existingsurface for complete concealed wiring is deemed to be included in quoted rate all as specified & directed by Engr-in-Charge (Qty - 23+18) |
| 103 | All as per item No 102 but for one 3 pin 5 Amp socket outlet on independent board. (Qty - 12+15) |
| 104 | All as per item No 102 but for one 3 pin 5 Amp socket outlet on same board. (Qty-2+3) |
| 105 | Point wiring with 2.5 sqmm FR PVC insulated and sheathed multi stranded (FRLSH) flexible copper conductor cable drawn in and including rigid PVC concealed conduit medium grade of suitable size with sunk cast iron/pressed steel terminal boxes of adequate size with suitable thickness plastic laminated sheet, cover for one 3 pin socket outlet 15 Amp on independent board including continuous 2.5 sqmm copper conductor cable (FRLSH) (multistranded) PVC insulated and unsheathed Cable as earth wire to common earth dolly, complete all as specified. (Qty-2+8) |
| 106 | Supply and fixing of switch piano flush type 240 Volts 6 Amps, SP, one way with White in color complete all as specifed/directed. |
| 107 | M&L for 6Amp, 2-In-1 Socket (IP 20) ISI marked. |
| 108 | Supply and fixing of switch socket outlet combination 5 Pin,6 Amps, 240 volts flush type (non shuttered) with white in color complete all as specified/ directed. |
| 109 | Supply and fixing switch socket out let combination multipurpose 3 pin, 6/16 Amps and (with 3 pin 6 Amps outlet also) flush type (non shuttered) with white in color complete all as specified directed. |
| 110 | Material and labour for ceiling rose surface bakelitetwo to three terminal isolated body fixed on PVC round block, 6A, Pilot 2 Plate with white in color complete all as specified and directed by Engr-in-charge |
| 111 | Supply and fixing LED lights fitting 1x 16W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 112 | S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. |
| 113 | Supply and fix of MCB SPN DB 8 way double door, glazed type, IP 43 protection,Glazed door, isolated neutral bar,insulated bus bar assembly,mechanical strength of IK09, complete all as specified and directed. |
| 114 | Supply & fix of MCBs single pole (SPN) 6 to 32 Amps with 10 KA breaking capacity of \"C\" Curve in distribution boards confirming to IS/IEC 60898-1 (ISI merked) complete all as specified and directed. |
| 115 | Supply & fix of MCBs single pole (SP) 6 to 32 Amps with 10 KA breaking capacity of \"C\" Curve in distribution boards confirming to IS/IEC 60898-1 (ISI merked) complete all as specified and directed. |
| 116 | M&L for Earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level, connected to galvanized earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanizediron or steel all as shown in electrical plate No.5 of SSR Part-I (2009) including filling of charcoal dust , common salt all around Earth plate upto 150mm, 20mm bore GI medium grade watering pipe, 15 mm bore light grade earth lead protection pipe upto main board, funnel with wiremesh, 40mm thickRCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate reinforced withsuitable handle and angle iron frameand necessary excavation and earth work in any type of soil etc. complete all asspecifiedand as directed includingtesting on completion. (Note: The rate quoted include cost of min 7.5 metre earthing wire .) |
| 117 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers. |
| 118 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC). |
| 119 | Supply and spread sand in trenches as sand cushioning to underground cable for protection with fine river sand and provide required cover after punning down complete all as specified and directed.Note : For the purpose of payment only punned thickness will be measured.(Note: Thickness of sand cushion after punning down will be measured and paid.) |
| 120 | M&L for common burnt clay building bricks (locally available best quality), sub-class ‘B’ designation 75 of size 230x115x75 mm to cover LT underground cables , laid dry and flat abutting each other with gaps not exceeding 10mm complete all as specified and directed. |
| 121 | Removing surplus excavated materials (soil) upto a distance not exe 50 m and depositing where directed at a level n exe 1.5 m above the starting point complete all as specified and directed. |
| 122 | Supply, laying connecting and testing XLPE insulated, PVC sheathed, armoured LT electric power UG cable of size 16 sqmm 2 core (heavy duty), aluminium strandedconductor 1100 volts grade, laid through duct/ pipe / in trench etc. including cable glands & lugs complete all as specified and directed. |
| 123 | M&L 40 mm bore GI tubing“light grade” in trenches/ on pole for protection of cables complete all as specified & directed by Engineer-in-charge. |
| 124 | Taking down carefully old unsv copper/aluminium point wiring (light, fan, socket or power) complete,including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets,sunken type box etc.and removing materials to store for keeping in safe custody for reuse at site or for taking credit and making good to disturbed surfaces of walls, floors etc with its original specification complete all as specified and directed by Engr-in-Charge. |
| 125 | Supply and fixing of modular switch one way 6 amps 1 module 240 Volts complete all as specifed/directed. |
| 126 | Supply and fixing of modularsocket outlet 2/3 pin 6 Amps 240 volts2 module complete all as specified/ directed. |
| 127 | Supply & fixing of modular switch one way 16 Amps1 module 240 Volts complete all as specified / directed. |
| 128 | Supply and fixing of modularsocket6/16 Amps, 2/3 pin combined, 2 module complete all as specified and directed. |
| 129 | Supply & Fixingof modular type ceiling fan regulator electronic step type ,2 module, 120 W complete all as specified and directed. |
| 130 | Supply and fixing ofceiling rose 3 ph PVC/Polycarbonate complete all as specified/directed. |
| 131 | Supply and fixing of modular metal flush box 1/2 module. |
| 132 | Supply and fixing of modular metal flush box 3 module. |
| 133 | Supply and fixing of modular metal flush box 6 module. |
| 134 | Supply and fixing of modular metal flush box 8 module. |
| 135 | Supply and fixing of modular white cover plate with frame 1/2 module |
| 136 | Supply and fixing of modular white cover plate with frame 3 module |
| 137 | Supply and fixing of modular white cover plate with frame 6 module |
| 138 | Supply and fixing of modular white cover plate with frame 8 module |
| 139 | Supply and fixing LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 140 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. |
| 141 | Material & labour for Sub main wiring with two runs of single core 6 Sqmm (Nominal Area) FRLS PVC insulated and unsheathed multi standed copper conductor cable LT 1100 volts grade drawn thorugh and including PVC conduit concealed of adequate size with all necessary fittings and accessaries and 1 run of FRLS PVC insulated and unsheathed insulated single core cable with multi stranded copper conductor of size 6 Sqmm as earth wire (green in colour) run through pvc conduit concealed and connected common earth dolly including taking out the old sub main wiring shall be deemed to be included in this item and shall be measured as one run complete all as specified and directed. Note:-Rate for Cutting, chieseling and making good the existingsurface for complete concealed wiring is deemed to be included in quoted rate all as specified & directed by Engr-in-Charge. |
| 142 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. |
AI Tender Summary
Tender Timeline
May 16, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedJun 06, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 13, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender