Military Engineer Services-MES has published Tender For Repair And Maintenance Of Centrifugal Pumps, Mono Block Pumps, Submersible Pumps, Starter Panels And Connected Cables, Panels And Associated Works At Hqtc Bangalore. Submission Date for this Tender is 06-06-2024. Starter Tenders in bangalore Karnataka. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 21-May-2024 | Tender Corrigendum | Other | 06-06-2024 |
| FileName | File Description | File Size |
| Tenderdocuments8224.pdf | Tender Document | 0 KB |
| SOC8224.pdf | Tender Document | 0 KB |
| f65417bf-f7f4-47ac-bea8-e3bc5fa008cc.html | Tender Notice | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| BOQ_732220.xls | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Testing of water samples collected from HQTC main pump house/ water distribution system/ bore well out let etc., and carryingout potability analysis/ requisite water quality parameters from any NABL approved laboratory and submitting the results as per the directions of Engr-in-charge including necessary transportation of containers complete as per the guidelines of laboratory complete all as specified and as directed by Engr-in-charge. |
| 2 | Material and labour for preventive maintenance of 60 HP motor pump sets by cleaning stator, rotor and servicing of pumpsets by replacing old gland packing, greasing in bearings etc and preparation of old painted surface and applying one coat of painting,complete including dismantling/separating of motor from pump and rexing the same after servicing complete all as specified and as directed by Engr-in-charge. |
| 3 | All as per item No.2 here-in-before but 20/12.5 HP pump set. |
| 4 | All as per item No.2 here-in-before but 10 HP pump set. |
| 5 | All as per item No.2 here-in-before but 7.5/5 HP pump set. |
| 6 | All as per item No.2 here-in-before but 3 HP pump set. |
| 7 | All as per item No.2 here-in-before but 2 HP pump set. |
| 8 | All as per item No.2 here-in-before but 1.0/0.5HP pump set. |
| 9 | Supply and fix in repairs ball bearings for 60 HP motor pump sets complete all as specified and as directed by Engr-in-charge. |
| 10 | Material and labour for taking out old burnt winding of centrifugal motor rewinding with approved quality super enamel insulated copper winding wire, replacing old insulating materials for 60 HP motor and reassembling the motor, testing and commissioning and inclusive of any transport form worksite to work shop and bring back complete all as specified and as directed by Engr-in-charge. |
| 11 | All as per item No.10 here-in-before but 20 HP. |
| 12 | All as per item No.10 here-in-before but 12.5 HP. |
| 13 | All as per item No.10 here-in-before but 10 HP. |
| 14 | All as per item No.10 here-in-before but 7.5 /5 HP. |
| 15 | All as per item No.10 here-in-before but 3 HP. |
| 16 | All as per item No.10 here-in-before but 1.0 /0.5 HP single phase. |
| 17 | Supply and fix in repairs gland bushing made of stainless steel suitable for 60 HP pump set, type-DSM 100/35 complete all as specified and as directed by Engr-in-charge. |
| 18 | Supply and fix in repairs buffalo leather gasket suitable up to 150mm bore CI foot valve in UG sump any depth complete all as specified and as directed by Engr-in-charge. |
| 19 | Supply and fix in repairs foot valve, in UG sump150mm bore, CI body and hard rubber gasket complete all as specified and as directed by Engr-in-charge. |
| 20 | Supply and fix in repairs foot valve, in UG sump100mm bore, CI body and hard rubber gasket complete all as specified and as directed by Engr-in-charge. |
| 21 | Supply and fix in repairs foot valve, in UG sump 80mm bore, CI body and hard rubber gasket complete all as specified and as directed by Engr-in-charge. |
| 22 | Supply and fix in repairs foot valve, 65/50mm bore in UG sump, CI body and hard rubber gasket complete all as specified and as directed by Engr-in-charge. |
| 23 | Labour and machaniary for lifting defective /unserviceable submersible pump set of 10/7.5/5/3/2 HP capacity along with column pipe/any pipe, electrical connecting cable with steel wire rope from open well and lowering with serviceable submersible pump set after repairs and anchoringthe same location including electric connections and testing, commissioning complete all as specified and as directed by Engr-in-charge. |
| 24 | Labour and machaniary for lifting defective /unserviceable submersible pumpfrom bore well vertical type multi stage, capacity 7.5/5 HP for repair / replacement of unserviceable parts such as bowls, diffursers, impellors, stainless strainer, NDE/DEbearing, rotor fitted shaft, thrust washers , elastic rings , diaghragm , pump shaft coupling etc. and reassembling the same after replacing any unserviceable spares as specified and necessary transport to workshop and bringing back and installing and testing at the same location complete all as specified and as directed by Engr-in-charge. Note: bowls, Impellers, diffusers, Stainless stainer, rotor fitted shaft, thrust washers, elastic rings, diapraghm, pump shaft couplilng, bearings and rewinding will be measured and paid separately. |
| 25 | Supply only impeller suitable for 60 HP motor pump set complete all as specified and as directed by Engr-in-charge. |
| 26 | Supply only impeller suitable for 20 HP motor pump set complete all as specified and as directed by Engr-in-charge. |
| 27 | Supply only impeller suitable for 12.5/10 HP motor pump set complete all as specified and as directed by Engr-in-charge. |
| 28 | Supply only impeller suitable for 7.5/5 HP motor pump set complete all as specified and as directed by Engr-in-charge. |
| 29 | Supply only pump shaft with coupling, bush suitable for 20 HP motor pump set complete all as specified and as directed by Engr-in-charge. |
| 30 | Supply only pump shaft with coupling, bush suitable for upto 7.5 HP motor pump set complete all as specified and as directed by Engr-in-charge. |
| 31 | Supply only NDE/DE bearings suitable for 20 HP motor pump set complete all as specified and as directed by Engr-in-charge. |
| 32 | Supply only NDE/DE bearings suitable for 12.5/10 HP motor pump set complete all as specified and as directed by Engr-in-charge. |
| 33 | Supply only NDE/DE bearings suitable for 7.5/5HP motor pump set complete all as specified and as directed by Engr-in-charge. |
| 34 | Supply only NDE/DE bearings suitable for 3 /2/1 HP moror pump set complete all as specified and as directed by Engr-in-charge. |
| 35 | Material and labour for taking out old burnt winding of submersible motor rewinding with approved quality super enamel insulated copper winding wire, replacing old insulating materials for 10 HP submersible motor and reassembling the motor, testing and commissioning and inclusive of any transport form worksite to work shop and bring back complete all as specified and as directed by Engr-in-charge. |
| 36 | All as per item No.35 here-in-before but motor 7.5 HP. |
| 37 | All as per item No.35 here-in-before but motor 5 HP. |
| 38 | All as per item No.35 here-in-before but motor 3 HP. |
| 39 | All as per item No.35 here-in-before but 2 HP. |
| 40 | Supply and fix for flat 3 core PVC insulated, submerssible multistranded copper conductor cable of size 2.5 sqmm including necessary connections including taking out old unserviceable submersible connection cable complete all as specified and as directed by Engr-in-charge. |
| 41 | All as per item No.40 here-in-before but submersible cable 4.0 sqmm, 3 core. |
| 42 | Supply and fix for MCCB, 4 pole, 125 Amps, 415 Volt adjustable type 16 KA breaking capacity, making electrical connections as required and testing complete all as specified and as directed by Engr-in-charge. |
| 43 | Supply and fix for MCCB, 4 pole, 100 Amps, 415 Volt adjustable type 16 KA breaking capacity, making electrical connections as required and testing complete all as specified and as directed by Engr-in-charge. |
| 44 | Supply and fix for MCCB, 4 pole, 63 Amps, 415 Volt adjustable type 16 KA breaking capacity making electrical connections as required and testing complete all as specified and as directed by Engr-in-charge. |
| 45 | Supply, install testing and commissioning of DOL starter for the motors of capacity of 5 HP including dismantling existing old motor starter from its location by removing all cable connections complete all as specified and as directed by Engr-in-charge. |
| 46 | Supply, install testing and commissioning of DOL starter for the motors of capacity of 3/2 HP including dismantling existing old motor starter from its location by removing all cable connections complete all as specified and as directed by Engr-in-charge. |
| 47 | Install and testing and commissioning of fully automatic star/Delta starter in sheet steel enclosure suitablefor 60 HP, 3 phase, 415 volts, 50HZ, AC complete including dismantling existing old starter form its position complete all as specified and as directed by Engr-in-charge. |
| 48 | All as per item No.47 here-in-before but 20 HP. |
| 49 | All as per item No.47 here-in-before but 12.5/10 HP. |
| 50 | All as per item No.47 here-in-before but up to 7.5 HP. |
| 51 | Supply and fix in repair new rubber coupling bush with bolt and nuts and aligning the pumpset properly for 60 HP pumpset including dismantling and taking out old worn out pump motor coupling bush and bolts complete all as specified and as directed by Engr-in-charge. |
| 52 | All as per item No.51 here-in-before but upto 20 HP. |
| 53 | Supply and fix in repair water pressure guage ranging 0-14 kg/sqcm including dismantling unserviceable exisitng pressure guage complete all as specified and as directed by Engr-in-charge. |
| 54 | Supply and fix in repair voltmeter 0-500 volts, square type 96 x 96 mm, connecting the cable complete all as specified and as directed by Engr-in-charge. |
| 55 | Supply and fix in repair ampere meter 0-100 Amps square type 96 x 96 mm, connecting the cable complete all as specified and as directed by Engr-in-charge. |
| 56 | Supply and fix in repair selector switch for selection of current/voltage including dismantling of unserviceable selector switch, connecting the cable complete all as specified and as directed by Engr-in-charge. |
| 57 | Supply and fix in repair LED indication lamp R/Y/B (each set of three) with base including dismantling of unserviceable indication lamp and connecting up the cables complete all as specified and as directed by Engr-in-charge. |
| 58 | Supply and fix in repair non return valve, heavy duty, PN –1.6, both end flanged, suitable to fix with 150mm bore pipe line complete all as specified and as directed by Engr-in-charge. |
| 59 | Supply and fix in repair non return valve, heavy duty, ISI Marked, PN –1.6, both end flanged, suitable to fix with 80mm borepipe line complete all as specified and as directed by Engr-in-charge. |
| 60 | Supply and fix in repair single phase preventer suitable for any capacity upto 20 Hp pump sets complete all as specified and as directed by Engr-in-charge. |
| 61 | Supply and fix in repair starter spares MK1 combination coils of 230 /380 Volts complete all as specified and as directed by Engr-in-charge. |
| 62 | Supply and fix in repair starter spares MK1 contactor coils of 230 /380 Volts complete all as specified and as directed by Engr-in-charge. |
| 63 | Material and labour for submain wiring with 2 runs of 2.5 sqmm and one run of 1.5 sqmm PVC insulated cable with copper conductor 1100 volts grade unsheathed multistranded and drawn into PVC conduit complete all as specified and as directed by Engr-in-charge. Note: Two single runs of 2.5 sqmm cable and one run of 1.5 sqmm cable shall be measured as one unit length. |
| 64 | Taking down submain wiring 2.5 sqmm copper conductor in PVC conduit complete all as specified and as directed by Engr-in-charge. |
| 65 | Material and labour for preventive maintenance of 1/0.5 HP pressure pump sets servicing of pumpsets and replacing old gland packing, greasing in bearings etc., and preparation of old painted surface and applying one coat of painting, and rexing the same after servicing complete all as specified and as directed by Engr-in-charge. |
| 66 | Supply and fix for column pipe with heavy duty GI tubing 50mm dia bore, each 6m length threaded both ends and with coupling (socket) suitable for above column pipe complete all as specified and as directed by Engr-in-charge. |
| 67 | Supply and fix in repairs gland bushing made of stainless steel suitable for 20 HP pump set, type-DSM 100/35 complete all as specified and as directed by Engr-in-charge. |
| 68 | Supply and fix in repairs gland bushing made of stainless steel suitable for 12.5/10 HP pump set, type-DSM 100/35 complete all as specified and as directed by Engr-in-charge. |
| 69 | Supply and fix in repairs buffalo leather gasket suitable up to 150mm bore CI foot valve complete all as specified and as directed by Engr-in-charge. |
| 70 | Supply and fix in repair MCCB, 4 pole, 200 Amps, 415 volt adjustable type 36 KA breaking capacity, making electrical connections as required and testing complete all as specified and as directed by Engr-in-charge. |
| 71 | Supply and fix in repair MCCB, 4 pole, 40 Amps, 415 volt adjustable type 16 KA breaking capacity imaking electrical connections as required and testing complete all as specified and as directed by Engr-in-charge. |
| 72 | Taking down MCCB 4 pole 200 Amps 415 volt 36 KA complete all as specified and as directed by Engr-in-charge. |
| 73 | Taking down MCCB 4 pole 40 Amps 415 volt 16 KA complete all as specified and as directed by Engr-in-charge. |
| 74 | Supply and fix in repair Non return valve, heavy duty, ISI Marked, PN –1.6, both end flanged, suitable to fix with 65mm borepipe line complete all as specified and as directed by Engr-in-charge. |
| 75 | Taking down MCCB 4 pole 125 Amps 415 volt 16 KA complete all as specified and as directed by Engr-in-charge. |
| 76 | Taking down MCCB 4 pole 100 Amps 415 volt 16 KA complete all as specified and as directed by Engr-in-charge. |
| 77 | Taking down MCCB 4 pole 63 Amps 415 volt 16 KA complete all as specified and as directed by Engr-in-charge. |
| 78 | Material and labour for glow sign board of size 1.20mx 0.75mx0.20m with angle iron frame made of MS square tube of 2.0mm thick, GI sheet of 1mm thick all around the frame except on front side and 25x25x1mm size outer aluminium frame with acrylic sheet, white letters on blue back ground including flourscent light fittings, tube 1x20 watts, 3 Nos fixed inside and necessary fixing arrangement. Glow sign board shall be fixed on GI tube of size 40mm medium grade 2.5m above ground level and 30 cm below the ground embedded in PCC foudation with 1:4:8 (40mm aggregate) of size 20x20x70cm, 2 Nos. The sign board shall be internally prewired with 1.5 sqmm multistranded copper conductor cable complete including dismantling and taking of existing unserviceable complete all as specified and as directed by Engr-in-charge. Note: The content and pattern of display on sign board shall be got approved by Engr-in-charge prior to fabrication. |
| 79 | S & Fstar bolt suitable for 20 HP pump set complete all as specified and as directed by Engr-in-charge. |
| 80 | Dismantling the existing defective digital water level indicator, servicing/ overhauling complete by replacing necessary spare parts for satisfactory performance complete all as specified and as directed by Engr-in-charge. Note: Spare parts shall be measured and paid separately. |
| 81 | Supply and fix in repair micro controller IC suitable for digital water indicator micro processor based complete all as specified and as directed by Engr-in-charge. |
| 82 | Supply and fix in repair buzzer for over flow indication suitable for digital indicator micro processor based complete all as specified and as directed by Engr-in-charge. |
| 83 | Supply and fix in repair printed circuit board (PCB) suitable for digital water indicator micro processor based complete all as specified and as directed by Engr-in-charge. |
| 84 | S & F magnetic sensor suitable for micro processor based digital water level indicator fixed at different levels inside sump/ over head reservoir for sensing level of water including dismantling old unserviceable sensor complete all as specified and as directed by Engr-in-charge. |
| 85 | Supply and fix for PVC insulated copper conductor cable, 12 core x 0.6 sqmm gauge, superior quality suitable for carrying signals from sensor to digital water level indicator of approved make including taking down existing unserviceable cable complete all as specified and as directed by Engr-in-charge. |
| 86 | Material and labour for preparation of surfaces of any description over 10 cm in width or girth not otherwise described, duly painted with 2 coats of synthetic enamel paint over coat of zinc chromate primer complete all as specified and as directed by Engr-in-charge. |
| 87 | Material and labour for writing letters or figures (Block Roman, Italic or Indian) not exc 30 cm, index hands (natural size) lines or arrow (upto 40 cm long) and stops, commas short lines, dashes, hyphens, brackets etc., complete all as specified and as directed by Engr-in-charge. |
| 88 | Supply and fix in repair onload changeover switch 200A and fitted with suitable lugs, cables etc., complete all as specified and as directed by Engr-in-charge. |
| 89 | Supply and fixin repair onload changeover switch 150A and fitted with suitable lugs cables etc., complete all as specified and as directed by Engr-in-charge. |
| 90 | Supply and fix in repair onload changeover switch 125A and fitted with suible lugs cables etc., complete all as specified and as directed by Engr-in-charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
