|
| 1 | Notes :-(i) Works needs to be executedatBSO yard as well as specified sites like HQTC area and CHAFB area. (ii) Contractor shall ensure availability ofsufficient No of carpentors, polishers and workers at the work site as mentioned above as per the quantum of repairs to be carryied out as per CA during the contract period all as directed by BSO to make the damaged furniture in good condition.(iii) Contractor quoted rates shall be deemed to include for above provisions and nothing extra is admissible on this account |
| 2 | Charpoy with hard top ( FD /E6/MAP/II/01)S&F 12 mm thick ply wood topcommercial grade,synthetic resin bonded, BWR type \"A\" conforming to IS 303-1989 of suitable size as per drawing and all as specified and as directed including removing the existing u/s plywood top of Charpoy with hard top complete all as specified and as directed. |
| 3 | S&FMS TubeStiffeners of 25mm x25mmx850 mm long 16 guage to welded and jointed to charpoy as per drawing and all as specified and as directed including removing the existing UNSV Middle supportMS Tube Stiffner of Charpoy with hard top complete all as specified and as directed. |
| 4 | M&L Painting of charpoy frame with two coats of black enamel paint by preparing the surfaces after removing old paints by means of spray painting toall steel surface etc complete all as specified and directed. |
| 5 | Charpoy Folding with hard top (FD-388R)S&F 12 mm thick ply wood topcommercial grade,synthetic resin bonded, BWR type \"A\" conforming to IS 303-1989 of suitable size as per drawing in two parts and as specified and as directed including removing the existing unsv ply wood top of Charpoy Folding hard top complete all as specified and as directed. |
| 6 | Repairs of charpoy folding frame including tightning, replacement of old nut and bolts and rivetsand welding whereever required as per trade practicecomplete all as specificed and directed. |
| 7 | M&L Painting of frame with two coats ofblack enamel paint by preparing the surfaces after removing old paints by means of spray painting toall steel surface etc complete all as specified and directed. |
| 8 | Hard bed with plytop ( FD /E6/MAP/08) S&F12 mm thick ply wood topcommercial grade,synthetic resin bonded, BWR type \"A\" conforming to IS 303-1989 of suitable size as per drawing and as specified and as directed including removing the existing u/s ply wood top ofHard Bed complete all as specified and directed |
| 9 | S&F 18 mm thick both sidepre- laminated MDF board of size 630 x 190 mm for Head board of Hard Bed incl PVC beading 2mm thick duly hot machine pressed all around all as per drawing and as specified and as directed removing the existing u/s PrelamiinatedMDF board of Head board of Hard Bed complete all as specified and directed. |
| 10 | S&F 18 mm thick both sideprelaminated MDF board of size 630 mm x 300 mm for Foot boardof Hard Bed inclPVC beading 2mm thick duly hot machine pressed all around all as per drawing and as specified and as directed removing the existing u/s PrelamiinatedMDF boardof Foot boardof Hard Bed complete all as specified and as directed. |
| 11 | Bunker Bed (FD-91/112)S&F 12 mm thickofplywood topcommercial grade,synthetic resin bonded, BWR type \"A\" conforming to IS 303-1989 suitable for bunker bed all as per drawing and as directed including removing the existing u/s ply wood top of Bunker Bed twin Bed system complete all as specified and as directed. |
| 12 | M&L Painting of frame of bunker bed with two coats of black enamel paints by means of spray painting toall steel surface after removing old paints and preparing the surfaces complete all as specified and as directed. |
| 13 | Chair dining High back with cushioned seat (TP) S&F 12 mm thickBWR commercial ply duly fixed with 75 mm thicksynthitic foam of 40 density coveredwith best quality tapesty cloth of approved qualityincluding tightening the frame with bamboo pins , colour and pattern of required size as per existing size and design and as directed including removing the existing u/s seat including 12 mm thick ply woodof Chair dining high back with cushion complete all as specified and as directed.Note:- Tapestry cloth shall not be less than Rs 350/- per meter. |
| 14 | S&F Ist class hard woodMiddle stiffener ofsize 25 x 40mm by removing the existingbroken Middle stiffener complete all as per drawing and complete all as specified and as directed. |
| 15 | M&L Melamine polish for Chair dining high back with cushion of approved colour and shade with spray machine after smoothening and preparation ofsurface as per trade practice and standard workmanship including necessary preparation and complete removal of the old polished surfaces by sand papering and removing the stains and rectifying the cracks and dents with filling materials like glue, bees wax resin etc mixed with polish of any description, width or girth to achieve glossy finish of natural teak/wallnut finish or shade and finish as directed by Engr-in-charge/GE. The workmanship should be as per trade practice and standard workmanship complete all as specified and as directed. |
| 16 | Table bed side(FD/E6/MAP-15)S&F 18mm thickPre- LaminatedMDF boardwith PVC beading 2mm thick duly hot machine pressed all around all as per drawing and all as specified and directed including removing the existing u/s Top ofTable bed side complete all as specified and as directed. |
| 17 | S&F 18mm thickPrelaminatedMDF board forsides of Table bed side with PVC beading 2mm thick duly hot machine pressed all around all as per drawingcomplete all as specified and as directed. |
| 18 | S&F 18mm thickPrelaminatedMDF board for front board of top and bottom Drawers ofTable bed side with PVC beading 2mm thick duly hot machine pressed all around all as per drawing and all as specified and directed includingremoving the existing u/s front board of top and bottom Drawers of Table bed sidecomplete all as specified and as directed. |
| 19 | S&FStainless steel \"D\" type handle of size 150mm of approved quality including removing the existing u/s Handle/Knob complete all as specified and as directed. |
| 20 | TV trolley (FD/E6/MAP-04)S&F Stainless steel \"D\" type handle of size 150mm of approved quality including removing the existing u/s Handles of drawers ofTV trolleyand complete all as specified and as directed. |
| 21 | S&F 18mm thickPre- Laminatedparticle board for Top of TV Trolleywith 4mm thick teak wood beading duly polished all aroundas per drawingand as specified and as directed including removing the existing u/s Top ofTV trolley complete all as specified and as directed. |
| 22 | S&F 18mm thickPrelaminatedparticle board for sides of TV Trolly with 4mm thick teak wood beading duly polished all around all as per drawing and all as specified and as directed including removing the existing u/s sides ofTV trolley complete all as specified and as directed. |
| 23 | S&F 5 mm thickGlass shutter with magnetic catcher for TV Trollyas per drawing and all as specified and directed including removing the existing u/s BrokenGlass shutter ofTV trolley complete all as specified and as directed. Make :Modi Guard/Saint Gobain |
| 24 | S&F Castors Wheels of best quality as approved all as per drawing and all as specified and directed including removing the existing u/s broken castors wheels ofTV trolley complete all as specified and as directed. |
| 25 | GI Charpoy plywood top (FD-220)S&F 12mm thick plywood commercial BWR grade ISI marked suitable for GI Charpoy with rounded edges on four corners, fixed with MS Bolts and nuts 6 mm dia 75 mm long with washers complete all as specified and directed including Removing the existing u/s plywood 12mm from GI charpoy plywood top complete all as specified and as directed. |
| 26 | Repairs of charpoy GI frame including tightning,re-threading of both end of required size of long rail, short rail, leg etc.complete all as specificed and shown on drg complete all as specified and as directed. |
| 27 | S&F flat iron 40 x 5 mm welded between long rails including the welded portion grinded smoothly and apply two coat of black enamel paint over a coat of primer for entire flat iron including removing the existing u/s flat iron complete all as specified and as directed. Note: Each flat iron will be measured as one unit. |
| 28 | S&F 32 mm medium grade ISI marked long rail of GI tubingincluding cutting, threading and bringing the GI charpoy into the original shape as shown in drawing and directed including removing the existing u/s/ broken long rail from GI charpoy complete all as specified and as directed. |
| 29 | Removing the existing u/s/ broken shortrail from GI charpoy and refixing short rails by converting long rails obtained from Sl item No 27.00 here-in-before including cutting, threading as required complete all as specified and as directed. |
| 30 | Removing the existing u/s legs from GI charpoy and refixing legs by converting long and short rail obtained from Sl item No 27 & 28here-in-before including cutting, threading complete all as specified and as directed. |
| 31 | S&F6 mm thick GI medium grade check nuts suitable for 32 mm dia GI pipeandall as specified and shown on drawings including Removing the u/s/broken check nuts from GI charpoy complete all as specified and as directed. |
| 32 | S&F 32 mm dia GI medium grade 3 way elbow ISI marked all as specified and shown on drg and directed including Removing the u/s/broken 3 way GI elbow from GI charpoy complete all as specified and as directed. |
| 33 | Chair Revolving High Back (TP)S&F 40mm thick 520 x 480mm or reqd size for seat existing chair revolving and covered with and including approved shade of best quality tapestry cloth as requried, all as specified and as directed at site incl removing the existing u/s seat PU foam icl tapestry cloth complete all as specified and as directed. Note :- Cost of tapestry shall not be less than 350/- per meter. |
| 34 | S&F 25mm thick 750 x 530mm for back of existing chair revolvingand covered with and including approved shade of best quality tapestry cloth as requried,all as specified and as directed at site incl removing the existing u/s back PU foam incl tapestry cloth complete all as specified and as directed. Note:- Cost of tapestry cloth shall not be less than 350/- per meter. |
| 35 | S&F Tilting bolt with accessories of suitable for existing size and design incl removing the existing unserviceable tilting bolt complete all as specified and directed. |
| 36 | S&F Castor wheels heavy duty of suitable for existing size 50 mm, all as specified and as directed incl removing the existing u/s castor wheels complete all as specified and as directed. |
| 37 | S&F Polyurethene handle of suitable for existing size and design incl removing the existing u/s Polyurethene handle complete all as specified and as directed. |
| 38 | S&F Stainless steel Star base heavy duty suitable for chair revolving and as directed incl removing the existing u/s PVC star base/steel star base complete all as specified and as directed. |
| 39 | S&F Pneumatic gas pump heavy duty best quality suitable for chair revolving and as directed incl removing the existing u/s Pneumatic gas pump complete all as specified and as directed. |
| 40 | Chair Computer (FD/E6/MAP/01)S&F40mm thick 510 x 470mm or reqd size for seat existing chair revolving and covered with and including approved shade of best quality tapestry cloth as requried, all as specified and as directed at site incl removing the existing u/s seat PU foam icl tapestry cloth. Note :- Cost of tapestry shall not be less than 350/- per meter. |
| 41 | S&F 25mm thick 750 x 530mm for back of existing chair revolvingand covered with and including approved shade of best quality tapestry cloth as requried,all as specified and as directed at site incl removing the existing unserviceable back PU foam incl tapestry cloth complete all as specified and as directed. Note:- Cost of tapestry cloth shall not be less than 350/- per meter. |
| 42 | S&F Tilting bolt with accessories of suitable for existing size and design incl removing the existing u/s tilting bolt complete all as specified and as directed. |
| 43 | S&F castor wheels heavy duty of suitable for existing size 50 mm, all as specified and as directed incl removing the existing u/s castor wheels complete all as specified and as directed. |
| 44 | S&F Polyurethene handle of suitable for existing size and design incl removing the existing u/s Polyurethene handle complete all as specified and as directed. |
| 45 | Removing the existing u/s PVC star base and S&F best quality PVC Star base of approved quality suitable forchair computer complete all as specified and as directed. |
| 46 | S&F Pneumatic gas pump heavy duty best quality suitable for chair computer and as directed incl removing the existing u/s Pneumatic gas pump complete all as specified and as directed. |
| 47 | Chair Writing (FD/E6/MAP/12)Removing the existing u/s U foam/sponge foam S&F 50 mm thick 500 x 490mm for seat of existing chair writing and covered with and including tapestry cloth complete all as specified and as directed. |
| 48 | Removing the existing u/s U foam/sponge foam S&F 50mm thick 520 x 480mm for back of existing chair writing and covered with and including tapestry cloth complete all as specified and as directed. |
| 49 | Removing the existing u/s polyurethene handle and S&F Polyurethene handle of suitable for existing size and design of approved quality complete all as specified and as directed. |
