Tender For Pneumatic & Hydraulic Cylinders Q5

Sharing tender

Tender For Pneumatic & Hydraulic Cylinders Q5 402102 0001 0001 300889468 CYL,LA,DRG:PG.21.23401-M4041/MSB001,PNE Technical Details Name : Anil Bhujade Contact : Email : [email protected] 1 NO CYLINDER,LINEAR ACTUATING APPLICATION:PNEUMATIC , BORE:350 MM , STROKE:180 MM SIZE, PORT:G 3/4 INCH ADDITIONAL INFORMATION:CARRY OVER TABLE WITH BELT DRAWING DRG NO:PG.21.23401-M4041/MSB001 , DRAWING REV NO:0 DRAWING TABLE REF:C.ETMT.PG.21.23401-M4041/MSB001 Item Details : dimension report,drg approval, QA report Item Note : 2 33402720 0001 0002 300905038 CYL,LA,PNEU,200MM,45MM,550MM,3/4INCH Technical Details Name : Prajapati, Bhavik - AM/NS India - SMP Ma Contact : 9879101412 Email : [email protected] 4 NO CYLINDER,LINEAR ACTUATING APPLICATION:PNEUMATIC , BORE:200 MM , ROD DIAMETER:45 MM STROKE:550 MM , SIZE, PORT:3/4 INCH , TYPE:DOUBLE ACTING PRESSURE RATING:12 BAR , POSITION MOUNT:HORIZONTAL TYPE, ROD FITTING MOUNTING:THREADED TYPE, BODY MOUNT:REAR RECTANGULAR FLANGE , DRAWING DRG NO:ASC/3789/18 DRAWING REV NO:0 Item Details : ALL BELOW REPORTS REQUIRED FOR REVIEW BEFORE DISPATCH. AFTER REVIEW CLEARENCE WILL BE GIVEN OR INSPECTION TO BE DONE AT VENDORS WORKS. DIMENSIONAL REPORT + CHEMICAL ANALYSIS + MECHANICAL PROPERTIES + UT REPORT + PRESSURE TESTING REPORT NOTES : (1) WE NEED MATERIAL EXACT AS PER DRG / BOM. (2) NO ANY ALTERNATIVE MATERIAL WILL BE ACCEPTED. (3) MATERIAL CODE AND PO NUMBER MUST MENTION IN ALL TEST REPORT. Item Note : 3 33412736 0001 0003 300150904 CYL,HYD,220X180X75MM,GP 20030903-1/B Technical Details Name : Niraj Patel Contact : Email : [email protected] 4 NO CYLINDER,LINEAR ACTUATING TYPE: HYDRAULIC , ACTION: DOUBLE , BORE SIZE: 220 MM STROKE: 75 MM , ROD DIAMETER: 180 MM , PRESSURE RATING: 400 BAR DRAWING NUMBER: GP 20030903-1/B REV 1 , MOUNTING: FRAME Item Details : 1. Vendor has to submit the detailed drawing for approval before manufacturing. Drawing should include all the details of the seal kits (including their sizes, moc <(>&<)> make honing details; chrome plating details etc. 2. All items in the drawings are in the scope of supply. 3. Threads should be strong enough to withstand the load and the drive clevis should not come out of the rod. 4. Cushioning on both side is required. 5. Seal kit details – Seals should be of Merkel / Hunger make 6. Guarantee of performance should be given by the vendor. 7. Internal inspection report <(>&<)> Test certificate to be sent for dispatch clearance. Item Note : 4 33412736 0002 0004 300037361 CYL,HYD,80X45X500MM,IPH-1778,160KG/CM2 Technical Details Name : Niraj Patel Contact : Email : [email protected] 6 NO CYLINDER,LINEAR ACTUATING TYPE : HYDRAULIC , ACTION : DOUBLE ACTING , BORE SIZE : 80 MM STROKE : 500 MM , ROD DIAMETER : 45 MM PRESSURE RATING : 160 KG/CM2 , DRAWING NUMBER : IPH-1778/REV:5 MOUNTING : CAP EYE , MAKE : IPH ADDITIONAL INFORMATION : CUSHIONED AT BOTH ENDS, TEST PRESSURE : 250 BAR Item Details : 1. Vendor has to submit the detailed drawing for approval before manufacturing. Drawing should include all the details of the seal kits (including their sizes, moc <(>&<)> make honing details; chrome plating details etc. 2. All items in the drawings are in the scope of supply. 3. Threads should be strong enough to withstand the load and the drive clevis should not come out of the rod. 4. Cushioning on both side is required. 5. Seal kit details – Seals should be of Merkel / Hunger make 6. Guarantee of performance should be given by the vendor. 7. Internal inspection report <(>&<)> Test certificate to be sent for dispatch clearance. Item Note : Page 2 of 2 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000112540 Date 15.05.2024 Submission Date 23.05.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Mr. Sampath Kumar Siripuram Contact Email [email protected] MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Material / Service No. Quantity UOM Detail Description Other Details 5 33413351 0001 0005 300902579 CYL,LA,DRG:2418-403-030,HYD,140MM,80MM Technical Details Name : Kumar, Lalit - AM/NS India - CRM - Mech Contact : +91 9879106161 Email : [email protected] 1 NO CYLINDER,LINEAR ACTUATING APPLICATION:HYDRAULIC , BORE:140 MM , ROD DIAMETER:80 MM STROKE:550 MM , PRESSURE RATING:50 BAR DRAWING DRG NO:2418-403-030 , DRAWING REV NO:0 APPLICATION AREA EQUIPMENT:BELT WRAPPER-2 ARM Item Details : 1)QAP and manufacturing drawing to be approved from AM/NS India,Hazira 2)Material shall be crack and porosity free. 3)Material test certificates for chemical and physical properties must be provided prior to dispatch the material 4)Dimensional report to be provided for approval prior to dispatch the material. 5)Pressure test certificate of cylinder to be provided before dispatch 6)Dimensional details and test certificate of sealkit to be p