Military Engineer Services-MES has published Tender For Provision Of Security Chain Link Fence Under Aor Age Br P Of Ge 861 Ews. Submission Date for this Tender is 08-06-2024. Wire Fencing Tenders in Anantnag Jammu And Kashmir. Bidders can get complete Tender details and download the document.
FileName | File Description | File Size |
Tendernotice_1.pdf | Tender Document | 0 KB |
6ee78f11-f045-45ac-8ec1-f29372c3f244.html | Tender Notice | 0 KB |
Tender21.pdf | Tender Document | 0 KB |
BOQ_732111.xls | Tender Document | 0 KB |
Sl. No. | Item Description |
1 | Excavating in post holes (or similar holes) each not exc 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm,thick out in soft / loose soil complete all as specified and directed by Engineer-in-Charge. |
2 | M&L for plain cement concrete type D2 (1:4:8) (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed by Engineer-in-Charge. |
3 | S&F hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching or wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed by Engineer-in-Charge. |
4 | S&F mild steel screw bolts (machine made) with hexagonal or square heads 11mmto15mm dia at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exc 5cm long complete all as specified and directed by Engineer-in-Charge. |
5 | S&F mild steel bars 10mm dia round bar, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips Fe-410-W (Gde E-250) quality A or Fe -290 (Gde E-165) complete all as specified and directed by Engineer-in-Charge. NOTE:- The horizontal line wires shall be weaved through chain link fence to provide stablity against sagging of chain link. The number of horizontal line wires to be provided shall be decided by GE/ Engr in charge as per site requriment. |
6 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed by Engineer-in-Charge. |
7 | Supply only Chain link MS galvanisd fencing, any size or type complete all as specified and directed by Engineer-in-Charge. |
8 | S&F galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and as directed by Engineer-in-Charge. |
9 | S&F concertina coil fencing with punch tape concerntina coil 600mm dia having 10 round per Rm up to 4 mtr height of wall with angle iron "Y" shape all as specified and as directed by Engineer-in-Charge. |
10 | M&L for preparation of newely steel surface of any description, over 10cm in width or girth, not otherwise described with two coats of synthetic enamel (ordinary tint ) (each coat) over a coat of red oxide zinc chrome primer complete all as specified and directed by Engineer-in-Charge. |
11 | M&L for preparation of newely steel surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint complete all as specified and directed by Engineer-in-Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail