Military Engineer Services-MES has published Tender For Repair Replacement Fresh Water Distribution Pipelines And Allied Works At Das, Telephone Exchange Complex At Naval Dockyard Visakhapatnam Under Ge(I) Dm Visakhapatnam. Submission Date for this Tender is 05-06-2024. Telephone Exchange Tenders in visakhapatnam Andhra Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 29-May-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 05-06-2024 |
| FileName | File Description | File Size |
| 4cf5c671-541c-4029-b9a8-eeb3859056f0.html | Tender Notice | 0 KB |
| 8022tender.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| BOQ_732075.xls | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Dismantling taking out GI pipe 25mm bore from PCC support/trenchesfor repair/ replacement/ relayingcomplete all as specified and directed. |
| 2 | Supply, fixing and testing of 25 mm bore medium gradeincluding complete GI specials on PCC support or on trenches complete all as specified and directed. |
| 3 | Laying only GI pipe 25mm bore obtained from item No. 1.00 above,after proper cleaning, descalling and fixing to original position including necessary rubber gusket, nuts, bolts & washers complete all as specified and directed. |
| 4 | Dismantling taking out GI pipe 40mm bore from PCC support/trenchesfor repair/ replacement/ relayingcomplete all as specified and directed. |
| 5 | Supply, fixing and testing of 40 mm bore medium gradeincluding complete GI specials on PCC support or on trenches complete all as specified and directed. |
| 6 | Laying only GI pipe 40mm bore obtained from item No. 4.00 above,after proper cleaning, descalling and fixing to original position including necessary rubber gusket, nuts, bolts & washers complete all as specified and directed. |
| 7 | Dismantling taking out GI pipe 50mm bore from PCC support/trenchesfor repair/ replacement/ relayingcomplete all as specified and directed. |
| 8 | Supply, fixing and testing of 50 mm bore medium gradeincluding complete GI specials on PCC support or on trenches complete all as specified and directed. |
| 9 | Laying only GI pipe 50mm bore obtained from item No. 7.00 above,after proper cleaning, descalling and fixing to original position including necessary rubber gusket, nuts, bolts & washers complete all as specified and directed. |
| 10 | Dismantling taking out GI pipe 80mm bore from PCC support/trenchesfor repair/ replacement/ relayingcomplete all as specified and directed. |
| 11 | Supply, fixing and testing of 80 mm bore medium gradeincluding complete GI specials on PCC support or on trenches complete all as specified and directed. |
| 12 | Laying only GI pipe 80mm bore obtained from item No. 10.00 above,after proper cleaning, descalling and fixing to original position including necessary rubber gusket, nuts, bolts & washers complete all as specified and directed. |
| 13 | Excavation in trenches not exceeding 1.5M in depth and not exceeding 1.5M wide for pipe and getting out in soft/loose soil complete all as specified and directed. |
| 14 | Excavation in trenches not exceeding 1.5M in depth and not exceeding 1.5M wide for cable/pipe and getting out in hard rock/Road/PCC hard standing and making thedisturbed surfaces good same as existing before excavationcomplete all as specified and directed. |
| 15 | Returning, filling in(soil), including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed. |
| 16 | Removing excavated materials(soil) not exceeding 50M, depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and directed. |
| 17 | Labour only for attending break down of pipe line bursting/cracks and including cleaning/removal of broken pipe pieces of various lengths through gas cutting / manual cutting as per site requirement and including inserting necessary specials such as pipesetc as per site requirement, testing for leakages of testing and necessary dewatering by using necessary pumps, mechanical excavator complete all as specified and directed by engineer-in-charge for the bore of GI pipe upto 25/40mm. Note :- The quoted rate is deemed to be include the following:- (i) Arrangement of suitable pump sets for dewatering at the time of breakdown.(ii) Necessary labour/trade men for attending break down . (iii) labour element required for fixing CI/DI/MS pipes, specials fittings (iv) CI/DI/MS Pipes and specials will be measured and paid seperately under relevant items.Items which are not available as supply only are deemed to be included to make the unit completely functional |
| 18 | Labour only for attending break down of pipe line bursting/cracks and including cleaning/removal of broken pipe pieces of various lengths through gas cutting / manual cutting as per site requirement and including inserting necessary specials such as pipesetc as per site requirement, testing for leakages of testing and necessary dewatering by using necessary pumps, mechanical excavator complete all as specified and directed by engineer-in-charge for the bore of GI pipe upto 50/80mm. Note:- The quoted rate is deemed to be include the following:- (i) Arrangement of suitable pump sets for dewatering at the time of breakdown.(ii) Necessary labour/trade men for attending break down . (iii) labour element required for fixing CI/DI/MS pipes, specials fittings (iv) CI/DI/MS Pipes and specials will be measured and paid seperately under relevant items.Items which are not available as supply only are deemed to be included to make the unit completely functional |
| 19 | Supply onlyGun metal gatevalve of size 50mmdia including taking out old unserviceable onecomplete all as specified and directed. |
| 20 | Supply only Gun metal gatevalve of size 40mm diaincluding taking out old unserviceable onecomplete all as specified and directed. |
| 21 | Supply onlyBallvalve of size 25mm diaincluding taking out old unserviceable onecomplete all as specified and directed. |
| 22 | Supply only Sluice valve class PN 1.6 of size 80mm diaincluding taking out old unserviceable onecomplete all as specified and directed. |
| 23 | Surface dressing of areas of above pipelines every 30days by clearing away all grass,wild vegetation,saplings,shrubs, brushwood,undergrowth,roots and tress not exceeding 30cm girth and removing rubbish upto a distance of 50mts outside the periphery of the area under clearance complete all as specified and as directed. |
| 24 | M&L for preparation of valve chambers smooth as existing and applying three coats of white wash and applying synthetic enamel black paint after cleaning the debris and vegetation etc per month complete all as specified and directed. |
| 25 | M&L for dismatling of foundation PCC, taking out from pump house, carrying to dumping yard inside ND (V) and necessary cleaning of work site all as specified and directed.. |
| 26 | M&L for cement concrete type B1, (1:2:4) with 20mm graded agreegatein foundation, filling in and mass concrete all as specified and directed. |
| 27 | M&L for servicing, maintenance, repair, overhauling of Motor upto 15 HP after dismatling taking out from pump set base,opening of complete motor, checking for defective bearings, Connecton plate, Connection terminals, cable lugs, re-assemble, reinstall, at pump base, connection with pump coupling, making proper alignment complete all as specified and directed . Motor Make- Kirloskar |
| 28 | M&L for servicing, maintenance, repair, overhauling of pump upto 15 HP after dismatling ,opening of complete pump, checking of all parts for any defects such as bearings, shaft ,impeller,sleeve, lantern ring, gland with bolts at both end, main shaft complete,re-assemble pump with gusket, nuts, bolts and washers, greasing all bearings, reinstall at pump base, connection with motor coupling, making proper alignmentwith required nuts,bolts,washers complete all as specified and directed . |
| 29 | M&L for rewinding of Motor upto 15HPafter dismatling taking out from pump set base,transportation to civil workshop outside DAS,ND(V), opening of complete motor, dismatling stator/rotor, rewinding the complete stator of motor with existing size of super enameled copper wire as per existing turn, heating, vernishing, replacement of both end bearing, Connecton plate, Connection terminals with new copper lugs for all 06 terminal, re-assemble, transport back to DAS,ND (V), reinstall at pump base, connection with pump coupling, making proper alignment , testing for satisfactory run complete all as specified and directed . Motor Make- Kirloskar |
| 30 | Labour only for attending electrical breakdowns checking the serviceability,testing,replacement of minor spare parts in starters,panels, DBs,pumps, making the unit completely functional complete all as specified and directed by engineer-in-change for the following sizes:- Note :- The quoted rate is deemed to be include (i) necessary T&P to attend the breakdown.(ii) Necessary labour/trade men for attending emmergency break down . (iii) labour element and spares required for making the unit completely functional such as control wiring,terminal bolts copper cables,lugs etc. (iv) PCC work wherever required |
| 31 | Earthing complete with copper plate 60×60cm ×3.15mm thick electrode and 20×3mm copper strip as earthing lead, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less"than 1.5 metres below normal ground level, connected to20×3mm copper strip by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed. |
| 32 | Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 20x3mm copper strip complete all as specified and directed. |
| 33 | M&L for replacement of MS founation base frame of 10 HP pump set made with structural steel section, as per existing size, painting with one coat of red oxide and two coat of black bituminous paint, fixing to original foundation location all as specified and directed. |
| 34 | M&L for installation of 10 HP pump and motor to original foundation position, coupling fixing, alignment of pump and motor, electric cable connection complete all as specified and directed. |
| 35 | M&L for Dismantling old LT panel Motor Starter carefully and supply, installation, testing and commissioning of Floor mounted cubical/trunk type indoor made out of 2 mm thick CRCA steel sheet traded and powder coated, prewired, factory made , with provision for one incoming and multiple outgoing as mentioned below, with suitable CT"s, individual compartmentdust and vermin proof, weather proof electrical panel and with Godrej type lock, cable glands etc. and consisting of the following all as specified and as directed :- (i) Electrolytic aluminium Bus bar of capacity 200 Amps for phases andneutral. (ii) MCCB 100 Amps 4 pole 36KA as incommer - 01 Nos. (iii) Heavy Duty Automatic Star Delta Starter DX-P with current rating 32A, 280-415V robust 4 Pole contactor (for 15 HP Motor) & LR1D OLR, Electronic Star Delta Timer- 02 Nos as outgoing (iv) MCCB 32 Amps 4 pole 16KA as - 02 Nos as out going (v) SPN DB 12 Way (with 32A 2Pole MCB -01 Nos and 6-32A SP MCB-10Nos) as out going - 01 No |
| 36 | (vi) Digital Ammeter 0-2000 Amps - 01 Nos. (vii) Digital voltmeter 0-500 Volts - 01 Nos. (viii) Indication lamps RYB - 03 sets. Note : (i) Drawing for LT panel showing layout of incoming and outgoing switch gear with capacity before errection shall be approved by Engr-in-Charge. (ii)Unit rate quoted include for necessary grouting / chipping of concrete and Anchor fastners and providing necessary PCC foundation to fix the LT Panel enclosure.(iii) quoted rate are Inclusive of aluminum Bus bar. (iv) MCCB/Motor Starter will be measured and paid separately. |
| 37 | Supply only Heavy Duty Automatic Star Delta Starter DX-P with current rating 32A, 280-415V robust 4 Pole contactor (for upto 15 HP Motor) & LR1D OLR, Electronic Star Delta Timer in SS Enclosure all as specified and as directed. |
| 38 | Supply only 100A MCCB 4 pole 415V fixed type with 36KA breaking capacity incl dismentling taking down unsv one all as specified and directed. |
| 39 | Supply only 32A MCCB 4 pole 415V fixed type with 16KA breaking capacity incl dismentling taking down unsv one all as specified and directed. |
| 40 | M&L for dismantling of electric connection cables from starter to motor, dismantling complete pump set of upto 15hp with foundation chanel, removing from base, keeping aside for repair of foundation PCC, pump, motor and foundation MS base frame all as specified and directed.. |
| 41 | M&L for installation upto 15HP pump and motor to original foundation position, coupling fixing, alignment of pump and motor, electric cable connection complete all as specified and directed. |
| 42 | M&L Mild steel framed work with ends of bars souldered, welded or reveted or forced into spikes, framed guard bars, ladders,chequred platesframed balusters, walk ways, railings, gates, frame work oftank, valvepit and similar workincl painting with one coat of red oxide primer and one coats of anticorrosive black bituminous paint incl dismantling mild steel work of any description not otherwise specially provided for all as specified and directed. |
| 43 | Supply onlyDry powder type fire extingisher ball type including mounting at various locations complete all as specified and directed |
| 44 | Supply fix install testing and commissioning fire hydrant valve CI single headedconforming to IS with iron wheel head and brass spindle flanged type 80mm including male coupling 63 mm complete all as specified and directed |
| 45 | Supply and fixing rubberized fabric reinforced rubber fire hose pipe of 63mm dia conforming to is-636,15 mtr ong for bust pressure of 35.7 kg/sqcmwith brass male and female coupling bound and reveted to hose pipe with suitable clamp with ISI markcomplete all as specified and directed |
| 46 | Supply and fixing internal hose box made of 2mm thick MS sheet 800mmx600mmx250mm with double door with 4mm thick glass and door frame of 2mm thick MS sheet painted red outside and white inside surface incl/taking out unsv complete all specified and directed |
| 47 | S&F water level indicator dial/analog type 600mm dia of measuring capacity not less than 13 feet in depth complete with rope,float and fixing above sump including taking out old unsv one complete all as specified and directed. |
| 48 | M&l for preparation to existing surfaces and applying one coat of synthetic enamel paint fire red colour to fire hydrant and blue colour to head and writing serial no as identification code complete all as specified and directed |
| 49 | M&l for preparation to existing surfaces and applying one coat of synthetic enamel paint black colour to sluice valve complete all as specified and directed |
| 50 | Material and labour for cleaning semi underground sumpof 0.5 lakhs Litres capacity (Main pump house) after every three month including removing all scales, dirt and sediments etc., by using wire brush or other means from the floor and side walls of semi under-ground sump including washing the entire sump with bleaching powder and apply one coat of white wash to the inner side walls complete all as specified and as directed Note :Each time cleaning of each semi underground sump shall be considered as one Job |
| 51 | Chemical and biological testing of raw water from NABL accredited laboratory and submit the test report to the Engineer-in-charge complete all as specified and as directed (sample to be collected from inlet source at FWPH at DAS) |
| 52 | Suppy, laying and commsioning of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 70 sq. mm 3.5core along with necessary electrical connections and accessories (like lugs etc) complete all as specfied and directed. |
| 53 | Supply and Laying/fixing to wall,surface HDPE pipe of size 50mm complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
