Military Engineer Services-MES has published Tender For Certain Repairs To Sanitary Fittings, Plastering, Internal Water Supply And Other Allied Works At Otm Accommodations Of Dmr Under Age B/R-I Area At Ge(N) Ahmednagar. Submission Date for this Tender is 05-06-2024. Water Pipe Line Tenders in ahmednagar Maharashtra. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| PS8855.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| BOQ_732130.xls | Tender Document | 0 KB |
| e977f610-846d-4912-ba55-a72c992dd485.html | Tender Notice | 0 KB |
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on brick or concrete surfaces on wall/ceilling/stone/block etc including racking out joint, hacking for key,scrubbing down with water etc all as specified and as directed |
| 2 | Demolition of brick work or stone/ boulder masonry/PCC block, built in cement mortar or cement lime mortar including all quoins, pillars etc. |
| 3 | M&L forBrickwork with old size fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 |
| 4 | M & for Plain Cement Concrete Type B0 1:2:4 (using 12.5 mm graded granite stone aggregate) in copings, kneelers, including weathering, slightly rounded or chamfered angles and throating, as directed |
| 5 | M&L for special treatment ot sunken portion with 10mm thick plaster in CM 1:4 with WPC liquid complast 421 and applying one coat Each of Nittoproof 120 on plastered surface rendering again 10mm thick in CM 1:4 mixed with complast - 421 filling the sunken floor with PCC 1:5:10 using brick bat area of floor upto 1.5 Sqm including 40 mm dia 0.60 m pipe etc complete all as specified and directedby Engineer-in-Charge. Note :Work has to be carried out strictly by the authonticated applicator of the manufacturer and as per manufacturers specification as approved by GE. |
| 6 | M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 ,finished even and smooth without using extra cement with WPC.Note:- WPC shall be measured & paid seperately. |
| 7 | M&L for rendering 15 mm thick in CM 1:6 over brick surfaces, finished even and smooth without using extra cement all as specified and as directed. |
| 8 | M&L for rendering 5 mm thick in CM 1:3 on ceillng, finished even and smooth all as specified and as directed. |
| 9 | M & L applying two coats of OBD over a coat of primer Chalk whiting, on plastered surfaces, prepara-tory to distempering on newly plastered wall surfaces all as specified and as directed. |
| 10 | M&L for preparing newly plastered surfaces of ceilings and applying three coats of white wash. |
| 11 | M&L for preparing new plastered surfaces and applying Two coats of cement base paint over a coat ofalkali resistant primer on surfaces of walls. |
| 12 | Supply only integral water proofing compound |
| 13 | M&L for preparing old surfaces of walls by brooming down or by steel wire brushing and applying one coat of white wash including scafolding at any height complete all as specified and directed by Enggineer-in-charge. |
| 14 | M&L for preparing old surfaces of ceilings by brooming down or by steel wire brushing and applying one coat of white washincluding scafolding at any height complete all as specified and directed by Enggineer-in-charge. |
| 15 | M&L for preparing old painted surfaces by washing, rubbing down and stopping of distempered and painted surfaces and applying a coat of distemper oil emulsion on surfaces of walls including scafolding at any height complete all as specified and directed by Enggineer-in-charge. |
| 16 | Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint including scafolding at any height complete all as specified and directed by Enggineer-in-charge.. |
| 17 | M&L for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint) including scafolding at any height complete all as specified and directed by Enggineer-in-charge.. |
| 18 | M&L for complete removal of existing treatment and prepartion of surfaces on surfaces of wallsand applying two coat of acrylic distemper Chalk whiting, on plastered surfaces, prepara-tory to distempering including scafolding at any height complete all as specified and directed by Enggineer-in-charge. |
| 19 | M&L for preparing old painted surfaces by washing, rubbing down and stopping of painted surfaces and applying a coat of cement base paint on surfaces of walls including scafolding at any height complete all as specified and directed by Enggineer-in-charge. |
| 20 | M&L for repair to crack including cutting V groove along cracks removing all dust and loosely laid particles using a blower wetting the crack using water and filling the crack using crack seal compound paste as per manufactures instructions and finishing using putty blade complete all as specified and directed at any height incuding necessary scaffolding. Make : Fosroc renderoc CS/ Sika cracksil/ Pidilite Dr fixit 217 Crack x Shrinkfree. |
| 21 | M & L for applying one coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 0.715litre/ 10 sqmcomplete all as specified and directed at any height incuding necessary scaffolding over existing surface. |
| 22 | Demolition of Cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) including floor finishes |
| 23 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises |
| 24 | S&F light shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6 . |
| 25 | S&F light shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10 mm thick in CM 1:4 on fair faces of brick or concrete surfaces ofwall as in backing of skirting and dado all as specified and as directed. |
| 26 | S&F coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6 |
| 27 | M&L for Glazed ceramic coloured in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including rendering 10 mm thick in CM 1:4 on fair faces of brick or concrete surfaces ofwall as in backing of skirting and dado all as specified and as directed. |
| 28 | Demolition of stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar in floorsaprons etc. |
| 29 | M&L for machine cut kota stoneflooring18-20 mm thick over Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc as directed by Er-In-Charge. |
| 30 | M&Lfor machine cut kota stone slab 18-20 mm thick in riser of steps,skirting,dado and pillar laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab overand including rendering 10 mm thick in CM 1:4 on fair faces of brick or concrete surfaces ofwall as in backing of skirting and dado all as specified and as directed. |
| 31 | M&L for machine cut cudappahstone 18-20 mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed for vertical support. |
| 32 | M&L Rounding to edges of stone slabs one edge ,such as in steps cooking platform and other similar situations |
| 33 | M&L 20mm thick granite (of any type ) work (table rubbed and polished ) in steps, jambs, pillars, window -cills, cooking platforms and like in cement (1:4) including pointing in wihte cement (1:2) using marble dust with admixture of pigment ot match with shade of granite. |
| 34 | M&L for 75 mm thick plain cement concrete 1:4:8 type D2, using 40 mm graded stoneaggregate as in sub base all as directed. |
| 35 | M&L for 25 mm thick Rough dressed sand stone slab flooring, laid dry but jointed and pointed in cement mortar 1:3 including 15 mm thick screed bed in cement and sand mortar (1:6),etc complete all as specified and directedby Engineer-in-Charge. |
| 36 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;complete all as specified and directedby Engineer-in-Charge |
| 37 | Taking down of chowkat with shutter without taking off shutters from the frame exceeding 1.5sqm each but not exceeding 4 sqm all as specified and as directed. |
| 38 | Taking down of shutters of any description not exceeding 1 sqm each all as specified and as directed. |
| 39 | Taking down of chowkat with shutter without taking off shutters from the frame, notexceeding 1.5sqm each all as specified and as directed. |
| 40 | Taking down of shutters of any description exceeding1 sqm each and not exceeding 2 sqm each all as specified and as directed. |
| 41 | M&L for re-fixining same opening of shutters of any description exceeding1 sqm each and not exceeding 2 sqm eachall as specified and as directed. |
| 42 | Re-securing or easing & adjusting, without taking down shutters of any description not exceeding 1 Sqm each. |
| 43 | Re-securing or easing & adjusting, without taking down shutters of any description exce 1.Sqm and not exceeding2 Sqm each. |
| 44 | S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) |
| 45 | S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, with particle board coare supplying & fixing in frame at site as per specification & drawing on sl. page no. 161 of SSR part II 2010 |
| 46 | M&L for Aluminium framed windows any pattern, fixed/side hung/silding ( three track) using powder coated of thickness 50 micron alluminium sections, of approved make with or with out sash bars suitable for 4.80mm thick glazing including necessary jointed cleats, glazing all as specifiedNote-: (glazing shall be measured and paid separatly) |
| 47 | S&F 30mm thick flush door shutter soild core construction with block board core and plywood face panels commercial type on both sides . |
| 48 | S&F second class hardwood glazed and skeleton shutters 35mm thick open rebated and prepared to receive glass gauge etc with sash bar divided into squares edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass or gauze etc sizes of members of shutters as specified in SSR part-I section 8 clause 8.20 (a) fitted to chowkats . |
| 49 | Hacking out old broken glasses any thickness, size, quality or description from wooden frames glazed with putty or fixed with bead all as specified and as directed. |
| 50 | Ditto all as per Sr item No 49 above but from metal frame including punching out or drilling out old glazing pins/spring clips and providing and fixing new all as specified and as directed. |
| 51 | S&F sheet glass ordinary quality 3 mm thickwith oil putty not exceeding 0.5 sqm in each pane all as specified and as directed. |
| 52 | S&F sheet glass ordinary quality 4.8 mm thickwith oil putty exceeding 0.5 sqm in each pane all as specified and as directed. |
| 53 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples all as specified and as directed. |
| 54 | Ditto all as per item No 53 above but fixed in repair to steel/wooden shutters |
| 55 | S&F in repair butt hinge, stainless steel 100mm long all as specified and as directed. |
| 56 | S&F in repair butt hinges stainless steel 75mm long all as specified and as directed. |
| 57 | S&F aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy 300 mm long and fixed all as specified and as directed. |
| 58 | S&FFloor door stopper of aluminium alloy body double and tongue anodised with rubber shoe and fixed of size 150 mm all as specified and as directed. |
| 59 | S&F aluminium anodised barred tower bolt of extruded section 200 mm long and fixed all as specified and as directed. |
| 60 | S&F extruded aluminium alloy handle fabricated type anodised 150 mm long |
| 61 | Ditto all as per Sr item No 60 above but 100mm long |
| 62 | M&L mild steel frame work such as grills with ends of barshouldered, welded or forged into spikes conforming to Fe 410-0 or Fe 310-0and taking down old one . |
| 63 | M&L for preparing new surfaces of wood of any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of pink primer all as specified and as directed. |
| 64 | Ditto all as per Sr item No 63 above but on steel surfaces over red oxide primer |
| 65 | S&F 300 mm long, mild steel ordinary rat rail springs including roller and roller plate complete and taking down old one all as specified and as directed. |
| 66 | S & F 20 mm dia of Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. brackets etc allas directed in repairs. |
| 67 | S&F in repair aluminium extruded Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed |
| 68 | M&L for welding in repairs n exc 2.5cm in length n exc 6mm thickall as specified . |
| 69 | M&L for Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges shall be paid separately) incl taking down old one |
| 70 | Taking down aluminium doors/windows shutters only and dismantling all members and reassembling the same with and including new screws, new rubber gasket, new aluminium beads & cleats of existing make and also refixng the handles & mortice looks in existing postiion with and includig new screws including refixing the door shutters in same opening etc complete all as specified anddirected by Engineer-in-Charge Note : If broken or unserviceable glass/aluminium wire mesh/floor spring/concealed lock is replaced same will be paid separately under relevant items. |
| 71 | S&F Pressed steel frames for doors with one or more rebates of size 125 x 60mmincluding necessary fixing lugs, hinges, lock strike plate, etc., complete, aspecified, supplied and fixed |
| 72 | Dismantling boarding, any description, fixed in wall or ceiling,any position with nails |
| 73 | S&FGl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. complete including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specifiedall as specifiedas per manufacturere"s instructions andall as directed |
| 74 | M&L for 4mm thick non asbestos fibre cement building boards of make "E" board classic designer board (cascade or Occenic) of M/s Everest Industries Ltd of equivalent as approved fixed or laid/inserted to timber/GI/Aluminium frame work with complete all as specified and as directed |
| 75 | M&L for 6-8 mm thick PVC insulation panels with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification and drawing as approved fixed or laid/inserted to timber/GI/Aluminium frame work with complete all as specified and as directed |
| 76 | M&L for repair and re-fixing only frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. complete including GI wire hangars at 1200 mm intervals all as specifiedas per manufacturere"s instructions andall as directed |
| 77 | S & F in repairvitreous china wash basin, white back, size 500 X 400 mm x 190 mm , errectingon existing CI brackets including taking down old one alll as specified and as directed . Note: If the mentioned size is not available in the market , the next immediate higher size shall be provided by the contractor . |
| 78 | S&F in in repair vitreous china squatting pan of orrisa pattern, size 580X 440x300 mm white, with integral foot rest "P" or "S" trap, including taking down old one completeall as specified and as directed. |
| 79 | S & F Vitreous Ware wash down water closet (Pedestal), white (ETWC) and fixed in repairs including seat cover with brass screws and excluding flush pipe and flushing cystren |
| 80 | S&F 10 in repair litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and taking down old one complete all as specified and as directed |
| 81 | S&F in repair PVC water closet seat and cover, black or white, closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device including taking down old one all as specified and as directed. |
| 82 | S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long. |
| 83 | S & F in repair Soap dish, vitreous China white of approximate size 160 x 160 x 90 mm. |
| 84 | S&F Towel Ring of PTMT and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms). |
| 85 | S&F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms). |
| 86 | S&F Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed. |
| 87 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 88 | S&F 40mm low density polyethene pipe (LDPE) of pressure rating 6 Kg F/CmSqcm fixedcomplete in wall ,floor etc including taking down old one all as specified and as directed. |
| 89 | S & F in repairs 40 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed. |
| 90 | Taking up or down steel tubing 15mm dia and connections, including cleaning for re- fixing |
| 91 | Taking up or down steel tubing 20mm dia and connections, including cleaning for re- fixing |
| 92 | S&F 16 mm dia Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 93 | S&F 20 mm dia Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 94 | Dismantling existing PVC water tanks of capacity exc 250 litres& n.exc 500 litres all asdirected and removed from site. NOTE:-Dismantled water tank shall become the contractors property as per Sch of credit. |
| 95 | Dismantling existing PVC water tanks of capacity exc 500 litres& n.exc 1000 litres all asdirected and removed from site. NOTE:-Dismantled water tank shall become the contractors property as per Sch of credit. |
| 96 | S&F 500 litres rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top)hoisted and fixed in position all as specified and directed . |
| 97 | Ditto all as per Sr Item No 96 above but 1000 ltrs |
| 98 | S and F Ball brass valve 20 mm dia high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule |
| 99 | S & F in repairs Fancy type chromium plated with long shank and cup (Concealed type) 15 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions. |
| 100 | S&F in repair 15 mm bore Fancy type sink taps (Swan neck), Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed. |
| 101 | S&F 15mm dia Chromium plated fancy type Bib taps cast copper alloy with crutch or butterfly handles screwed down screwed for iron pipe fixed in repair all as spd & directed . |
| 102 | S&F in repair Brass chromium Brass CP wall mixer 3 in 1 system with provision of hand shower/overhead shower for mixing hot & cold water screwed down for iron pipe and fixed as all specifed and as directed. |
| 103 | S&F bib tap 15mm dia standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm- 125gms). |
| 104 | S&F pillar taps 15mm dia of PTMT any colour high pressure screwedfor iron pipe and fixed.(Minimum weight 15mm-110gms) |
| 105 | S&F waste coupling of PTMT 40mm (half or full threaded) sutable for kitchen sink. (Minimum weight 32mm- 45gms/40mm-60 gms) |
| 106 | S&F in repair Brass chromium plated bottle traps of 32/40 mm dia for washasins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed |
| 107 | S&F grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) |
| 108 | S&F in repair Chromium plated shower roses 125 mm dia sizewith or without swevel joints and size including fixing to steel pipe or union. |
| 109 | S&F PVC connections 15mm size with PTMT nuts of length 450mm |
| 110 | S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls. |
| 111 | S & F 110 mm bore PVC (SWR) bends of any radius. |
| 112 | Ditto all as per Sr item No.111 above but except fittings |
| 113 | S & F 110 mm bore PVC (SWR) branch piece single (Single `Y") equal or unequal with access door. |
| 114 | S&F PVC (SWR) pipes single socketed,75mm dia inanylength with rubber ring joints, laid in trenches or in floors |
| 115 | S&F PVC (SWR)bendsany radius 75mm bore |
| 116 | S&F PVC (SWR) multi floor trap 75mm dia with grating including jointing with solvent cement |
| 117 | S&F in kitchen or laboratory sink with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm |
| 118 | S&F mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers |
| 119 | Cleaning and removing all scale and dirt etc. from tanks and from mouths of circulationgpipe, etc. of exc. 500 n.exc. 1000 Ltrs capacity. |
| 120 | Cleaning and removing all scale and dirt etc. from tanks and from mouths of circulationgpipe, etc. of exc. 1000 n.exc. 2000 Ltrs capacity. |
| 121 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for all as specified and directed. |
| 122 | S & F Rolled Mild Steel Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etcconfirming to Fe 410 - W (Gde E-250)quality-A, |
| 123 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings |
| 124 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall,fixed with self tapping screwsaas specified etc all as directed. |
| 125 | Supply and fix0.50mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 all as directed. |
| 126 | Taking down carefully existing unserviceable bitumen felt(any number of layers) including plaster of any thickness, wire brushing and cleaning of the surface of roof terraces including flashing and junctions of parapets kerb wall, PCC fillets, benching etc and removing of the rubbish to a distance not exceeding 500 m from the building and depositing where complete all as specified and directed |
| 127 | M&L for rendering 10 mm thick in CM (1:4) on roof slab top finished even and fair without using extra cement complete all as specified. |
| 128 | Demolition of plain cement concrete(unreinforced) in ground floor including concrete at junctions of parapets and roof terraces, flashing kerbs walls, PCC fillets, benching coving of chajjah top/junctions etc complete all as specified |
| 129 | Material and labour for providing plain cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) for roof, kerb, or mud stops, rounded or chamfered on edges etc complete all as specified and as directed. |
| 130 | M&L for cleaning the newly plastered surfaces of concrete (roof etc) with wire brushes and applying water proofing treatment as under :- (i) Checking the roof slab by flooding test with water till total elimination of leakage/seepage/ dampnessall as specified in SSR Part-I (after ascertaining location of leakage/seepage/ dampness, carrying out treatment vide item No. hereinafter of pressuregrouting shall be operated at the required locations). (ii) Brushing surface with neat cement slurry at the rate of 3.00kg of cement per Sqm. (iii) Applying one coat of oil bound bituminous primer @ 0.25 kg/Sq. M (iv) Providing and laying 3mm thick APP modified water proofing membrane weighing not less than 3.5 Kg/Sqm reinforced with non woven polyester mat weighing not less than 160 gm/Sqm all as specified procured from any one of the approved manufactures (v) Apply two coat of solar reflective bituminous aluminium paint @ 0.15 kg/Sqm per coat over membrane over non assesble roof surfaces complete all as per manufactures instructions and as directed |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
